From: Li Yang <leoyang.li@nxp.com>
To: Shawn Guo <shawnguo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Xiaowei Bao <xiaowei.bao@nxp.com>, Li Yang <leoyang.li@nxp.com>,
Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Subject: [PATCH 09/11] arm64: dts: lx2160a: add pcie EP mode nodes
Date: Wed, 10 Nov 2021 16:21:58 -0600 [thread overview]
Message-ID: <20211110222200.6780-10-leoyang.li@nxp.com> (raw)
In-Reply-To: <20211110222200.6780-1-leoyang.li@nxp.com>
From: Xiaowei Bao <xiaowei.bao@nxp.com>
The LX2160A PCIe EP mode nodes based on controller used on lx2160a rev2.
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
---
.../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 60 +++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 05a3d403fe0c..7835ad42da04 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -1115,6 +1115,16 @@ pcie1: pcie@3400000 {
status = "disabled";
};
+ pcie_ep1: pcie_ep@3400000 {
+ compatible = "fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep";
+ reg = <0x00 0x03400000 0x0 0x00100000
+ 0x80 0x00000000 0x8 0x00000000>;
+ reg-names = "regs", "addr_space";
+ num-ob-windows = <8>;
+ num-ib-windows = <8>;
+ status = "disabled";
+ };
+
pcie2: pcie@3500000 {
compatible = "fsl,ls2088a-pcie";
reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
@@ -1143,6 +1153,16 @@ pcie2: pcie@3500000 {
status = "disabled";
};
+ pcie_ep2: pcie_ep@3500000 {
+ compatible = "fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep";
+ reg = <0x00 0x03500000 0x0 0x00100000
+ 0x88 0x00000000 0x8 0x00000000>;
+ reg-names = "regs", "addr_space";
+ num-ob-windows = <8>;
+ num-ib-windows = <8>;
+ status = "disabled";
+ };
+
pcie3: pcie@3600000 {
compatible = "fsl,ls2088a-pcie";
reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
@@ -1171,6 +1191,16 @@ pcie3: pcie@3600000 {
status = "disabled";
};
+ pcie_ep3: pcie_ep@3600000 {
+ compatible = "fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep";
+ reg = <0x00 0x03600000 0x0 0x00100000
+ 0x90 0x00000000 0x8 0x00000000>;
+ reg-names = "regs", "addr_space";
+ num-ob-windows = <256>;
+ num-ib-windows = <24>;
+ status = "disabled";
+ };
+
pcie4: pcie@3700000 {
compatible = "fsl,ls2088a-pcie";
reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
@@ -1199,6 +1229,16 @@ pcie4: pcie@3700000 {
status = "disabled";
};
+ pcie_ep4: pcie_ep@3700000 {
+ compatible = "fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep";
+ reg = <0x00 0x03700000 0x0 0x00100000
+ 0x98 0x00000000 0x8 0x00000000>;
+ reg-names = "regs", "addr_space";
+ num-ob-windows = <8>;
+ num-ib-windows = <8>;
+ status = "disabled";
+ };
+
pcie5: pcie@3800000 {
compatible = "fsl,ls2088a-pcie";
reg = <0x00 0x03800000 0x0 0x00100000 /* controller registers */
@@ -1227,6 +1267,16 @@ pcie5: pcie@3800000 {
status = "disabled";
};
+ pcie_ep5: pcie_ep@3800000 {
+ compatible = "fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep";
+ reg = <0x00 0x03800000 0x0 0x00100000
+ 0xa0 0x00000000 0x8 0x00000000>;
+ reg-names = "regs", "addr_space";
+ num-ob-windows = <256>;
+ num-ib-windows = <24>;
+ status = "disabled";
+ };
+
pcie6: pcie@3900000 {
compatible = "fsl,ls2088a-pcie";
reg = <0x00 0x03900000 0x0 0x00100000 /* controller registers */
@@ -1255,6 +1305,16 @@ pcie6: pcie@3900000 {
status = "disabled";
};
+ pcie_ep6: pcie_ep@3900000 {
+ compatible = "fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep";
+ reg = <0x00 0x03900000 0x0 0x00100000
+ 0xa8 0x00000000 0x8 0x00000000>;
+ reg-names = "regs", "addr_space";
+ num-ob-windows = <8>;
+ num-ib-windows = <8>;
+ status = "disabled";
+ };
+
smmu: iommu@5000000 {
compatible = "arm,mmu-500";
reg = <0 0x5000000 0 0x800000>;
--
2.25.1
next prev parent reply other threads:[~2021-11-10 22:22 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-10 22:21 [PATCH 00/11] lx216x DTS updates Li Yang
2021-11-10 22:21 ` [PATCH 01/11] dt-bindings: qoriq-clock: add missing compatible for lx2160a Li Yang
2021-11-29 20:50 ` Rob Herring
2021-11-10 22:21 ` [PATCH 02/11] dt-bindings: fsl,layerscape-dcfg: " Li Yang
2021-11-29 20:53 ` Rob Herring
2021-11-29 23:28 ` Leo Li
2021-11-10 22:21 ` [PATCH 03/11] arm64: dts: lx2160a: fix scl-gpios property name Li Yang
2021-11-10 22:21 ` [PATCH 04/11] arm64: dts: lx2160a-rdb: Add Inphi PHY node Li Yang
2021-11-10 22:21 ` [PATCH 05/11] arm64: dts: lx2160a: add optee-tz node Li Yang
2021-11-10 22:21 ` [PATCH 06/11] arm64: dts: lx2160a-qds: enable sata nodes Li Yang
2021-11-10 23:48 ` Leo Li
2021-11-10 22:21 ` [PATCH 07/11] arm64: dts: lx2160aqds: Add mdio mux nodes Li Yang
2021-11-10 22:21 ` [PATCH 08/11] arm64: dts: lx2160a: update PCIe nodes to match rev2 silicon Li Yang
2021-11-10 22:21 ` Li Yang [this message]
2021-11-10 22:21 ` [PATCH 10/11] arm64: dts: lx2160a: enable usb3-lpm-capable for usb3 nodes Li Yang
2021-11-10 22:22 ` [PATCH 11/11] arm64: dts: lx2162aqds: support SD UHS-I and eMMC HS400 modes Li Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211110222200.6780-10-leoyang.li@nxp.com \
--to=leoyang.li@nxp.com \
--cc=Zhiqiang.Hou@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
--cc=xiaowei.bao@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).