From: Julien Massot <julien.massot@iot.bzh>
To: bjorn.andersson@linaro.org, mathieu.poirier@linaro.org,
robh+dt@kernel.org, geert+renesas@glider.be
Cc: linux-renesas-soc@vger.kernel.org,
linux-remoteproc@vger.kernel.org, devicetree@vger.kernel.org,
Julien Massot <julien.massot@iot.bzh>
Subject: [PATCH v1 0/3] Initial Renesas R-Car remoteproc support
Date: Mon, 15 Nov 2021 14:50:29 +0100 [thread overview]
Message-ID: <20211115135032.129227-1-julien.massot@iot.bzh> (raw)
Most of the SoCs in the R-Car gen3 SoC series such as
H3,M3 and E3 have an 'Arm Realtime Core'.
This Realtime core is an Arm Cortex-R7 clocked at 800MHz.
This series adds initial support to load a firmware and start
this remote processor through the remoteproc subsystem.
This series depends on
https://patchwork.kernel.org/project/linux-renesas-soc/patch/20211022122101.66998-1-julien.massot@iot.bzh/
to be able to set the Cortex-R7 boot address.
One of the way to test this driver is to use the zephyr upstream support
for h3ulcb board 'blinky' demo is my favorite testing firmware.
To generate a firmware with the zephyr project.
follow this starting guide
https://docs.zephyrproject.org/2.7.0/getting_started/index.html
Then compile your zephyr demo
west build -b rcar_h3ulcb_cr7 zephyr/samples/basic/blinky \
-DCONFIG_KERNEL_ENTRY=\"_vector_table\" \
--build-dir h3-blinky
Then you can use h3-blinky/zephyr/zephyr.elf as a testing
firmware.
Patch 1/3 adds the dt-bindings
Patch 2/3 adds entries into the dts/dtsi files for r8a77951,
my testing platform. This driver has also been tested on E3 and M3,
but lacks proper zephyr support at the moment.
Modifications to r8a77951-ulcb.dts are given as usage example
and may be dropped in future patchset since it use some memory
range that may be reserved for other usage.
Patch 3/3 is a small driver to cover basic remoteproc
usage: loading firmware from filesystem, starting and stopping the
Cortex-r7 processor.
Julien Massot (3):
dt-bindings: remoteproc: Add Renesas R-Car
arm64: dts: renesas: r8a77951: Add CR7 realtime processor
remoteproc: Add Renesas rcar driver
.../remoteproc/renesas,rcar-rproc.yaml | 66 +++++
arch/arm64/boot/dts/renesas/r8a77951-ulcb.dts | 15 ++
arch/arm64/boot/dts/renesas/r8a77951.dtsi | 7 +
drivers/remoteproc/Kconfig | 12 +
drivers/remoteproc/Makefile | 1 +
drivers/remoteproc/rcar_rproc.c | 226 ++++++++++++++++++
6 files changed, 327 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
create mode 100644 drivers/remoteproc/rcar_rproc.c
--
2.31.1
next reply other threads:[~2021-11-15 13:51 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-15 13:50 Julien Massot [this message]
2021-11-15 13:50 ` [PATCH v1 1/3] dt-bindings: remoteproc: Add Renesas R-Car Julien Massot
2021-11-29 22:01 ` Rob Herring
2021-11-30 8:51 ` Julien Massot
2021-11-15 13:50 ` [PATCH v1 2/3] arm64: dts: renesas: r8a77951: Add CR7 realtime processor Julien Massot
2022-01-10 13:00 ` Geert Uytterhoeven
2021-11-15 13:50 ` [PATCH v1 3/3] remoteproc: Add Renesas rcar driver Julien Massot
2021-11-15 14:12 ` Biju Das
2021-11-15 14:41 ` Julien Massot
2021-11-15 15:17 ` Biju Das
2021-11-22 18:37 ` Mathieu Poirier
2021-11-24 11:07 ` Julien Massot
2021-11-24 17:35 ` Mathieu Poirier
2021-11-15 18:10 ` [PATCH v1 0/3] Initial Renesas R-Car remoteproc support Mathieu Poirier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211115135032.129227-1-julien.massot@iot.bzh \
--to=julien.massot@iot.bzh \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=linux-remoteproc@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).