From: Rob Herring <robh@kernel.org>
To: Julien Massot <julien.massot@iot.bzh>
Cc: bjorn.andersson@linaro.org, mathieu.poirier@linaro.org,
geert+renesas@glider.be, linux-renesas-soc@vger.kernel.org,
linux-remoteproc@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v1 1/3] dt-bindings: remoteproc: Add Renesas R-Car
Date: Mon, 29 Nov 2021 16:01:09 -0600 [thread overview]
Message-ID: <YaVNpcv/R/iKxn1w@robh.at.kernel.org> (raw)
In-Reply-To: <20211115135032.129227-2-julien.massot@iot.bzh>
On Mon, Nov 15, 2021 at 02:50:30PM +0100, Julien Massot wrote:
> Renesas R-Car SoCs may contains a Realtime processor.
> This patch adds binding for this remote processor.
>
> Signed-off-by: Julien Massot <julien.massot@iot.bzh>
> ---
> Change since RFC:
> Adds missing address-cells and size-cells and change reg cell
> accordingly.
> ---
> .../remoteproc/renesas,rcar-rproc.yaml | 66 +++++++++++++++++++
> 1 file changed, 66 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
> new file mode 100644
> index 000000000000..dcb6b0f75dda
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
> @@ -0,0 +1,66 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/remoteproc/renesas,rcar-rproc.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Renesas R-Car remote processor controller bindings
> +
> +maintainers:
> + - Julien Massot <julien.massot@iot.bzh>
> +
> +description: |
> + This document defines the binding for the remoteproc component that loads and
> + boots firmwares on the Renesas R-Car family chipset.
> + R-Car gen3 family may have a realtime processor, this processor share peripheral
> + and RAM with the host processor with the same address map.
> +
> +properties:
> + compatible:
> + const: renesas,rcar-cr7
> +
> + resets:
> + maxItems: 1
> +
> + power-domains:
> + maxItems: 1
> +
> + memory-region:
> + description:
> + List of phandles to the reserved memory regions associated with the
> + remoteproc device. This is variable and describes the memories shared with
> + the remote processor (e.g. remoteproc firmware and carveouts, rpmsg
> + vrings, ...).
> + (see ../reserved-memory/reserved-memory.yaml)
> +
> +required:
> + - compatible
> + - resets
> + - memory-region
> + - power-domains
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
> + #include <dt-bindings/power/r8a7795-sysc.h>
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cr7_ram: cr7_ram@40040000 {
> + no-map;
> + reg = <0x0 0x40040000 0x0 0x1fc0000>;
> + };
> + };
> +
> + cr7_rproc: cr7 {
> + compatible = "renesas,rcar-cr7";
> + memory-region = <&cr7_ram>;
> + power-domains = <&sysc R8A7795_PD_CR7>;
> + resets = <&cpg 222>;
> + status = "okay";
Don't show status in examples.
With that,
Reviewed-by: Rob Herring <robh@kernel.org>
next prev parent reply other threads:[~2021-11-29 22:03 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-15 13:50 [PATCH v1 0/3] Initial Renesas R-Car remoteproc support Julien Massot
2021-11-15 13:50 ` [PATCH v1 1/3] dt-bindings: remoteproc: Add Renesas R-Car Julien Massot
2021-11-29 22:01 ` Rob Herring [this message]
2021-11-30 8:51 ` Julien Massot
2021-11-15 13:50 ` [PATCH v1 2/3] arm64: dts: renesas: r8a77951: Add CR7 realtime processor Julien Massot
2022-01-10 13:00 ` Geert Uytterhoeven
2021-11-15 13:50 ` [PATCH v1 3/3] remoteproc: Add Renesas rcar driver Julien Massot
2021-11-15 14:12 ` Biju Das
2021-11-15 14:41 ` Julien Massot
2021-11-15 15:17 ` Biju Das
2021-11-22 18:37 ` Mathieu Poirier
2021-11-24 11:07 ` Julien Massot
2021-11-24 17:35 ` Mathieu Poirier
2021-11-15 18:10 ` [PATCH v1 0/3] Initial Renesas R-Car remoteproc support Mathieu Poirier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YaVNpcv/R/iKxn1w@robh.at.kernel.org \
--to=robh@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=julien.massot@iot.bzh \
--cc=linux-remoteproc@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).