* [PATCH v4 0/2] AMAC and SYSTEMPORT bindings YAML conversion
@ 2021-12-08 20:27 Florian Fainelli
2021-12-08 20:28 ` [PATCH v4 1/2] dt-bindings: net: Convert AMAC to YAML Florian Fainelli
2021-12-08 20:28 ` [PATCH v4 2/2] dt-bindings: net: Convert SYSTEMPORT " Florian Fainelli
0 siblings, 2 replies; 7+ messages in thread
From: Florian Fainelli @ 2021-12-08 20:27 UTC (permalink / raw)
To: devicetree
Cc: Florian Fainelli, David S. Miller, Jakub Kicinski, Rob Herring,
Rafał Miłecki,
maintainer:BROADCOM IPROC GBIT ETHERNET DRIVER,
open list:NETWORKING DRIVERS, open list
Hi Rob,
Since the other patches have been applied to dt/next, here are the two
that you requested changes to be made:
Changes in v4:
- updated AMAC to list all possible reg-names values and then use
conditionals to adjust minItems/maxItems based upon the compatible
string
- updated SYSTEMPORT to indicate the tx/rx queue range, drop unnecessary
quotes and use unevaluatedProperties: false
Thanks!
Florian Fainelli (2):
dt-bindings: net: Convert AMAC to YAML
dt-bindings: net: Convert SYSTEMPORT to YAML
.../devicetree/bindings/net/brcm,amac.txt | 30 -------
.../devicetree/bindings/net/brcm,amac.yaml | 88 +++++++++++++++++++
.../bindings/net/brcm,systemport.txt | 38 --------
.../bindings/net/brcm,systemport.yaml | 88 +++++++++++++++++++
MAINTAINERS | 3 +-
5 files changed, 178 insertions(+), 69 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/brcm,amac.txt
create mode 100644 Documentation/devicetree/bindings/net/brcm,amac.yaml
delete mode 100644 Documentation/devicetree/bindings/net/brcm,systemport.txt
create mode 100644 Documentation/devicetree/bindings/net/brcm,systemport.yaml
--
2.25.1
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v4 1/2] dt-bindings: net: Convert AMAC to YAML
2021-12-08 20:27 [PATCH v4 0/2] AMAC and SYSTEMPORT bindings YAML conversion Florian Fainelli
@ 2021-12-08 20:28 ` Florian Fainelli
2021-12-08 21:45 ` Rob Herring
2021-12-08 20:28 ` [PATCH v4 2/2] dt-bindings: net: Convert SYSTEMPORT " Florian Fainelli
1 sibling, 1 reply; 7+ messages in thread
From: Florian Fainelli @ 2021-12-08 20:28 UTC (permalink / raw)
To: devicetree
Cc: Florian Fainelli, David S. Miller, Jakub Kicinski, Rob Herring,
Rafał Miłecki,
maintainer:BROADCOM IPROC GBIT ETHERNET DRIVER,
open list:NETWORKING DRIVERS, open list
Convert the Broadcom AMAC Device Tree binding to YAML to help with
schema and dtbs checking.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
.../devicetree/bindings/net/brcm,amac.txt | 30 -------
.../devicetree/bindings/net/brcm,amac.yaml | 88 +++++++++++++++++++
MAINTAINERS | 2 +-
3 files changed, 89 insertions(+), 31 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/brcm,amac.txt
create mode 100644 Documentation/devicetree/bindings/net/brcm,amac.yaml
diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt b/Documentation/devicetree/bindings/net/brcm,amac.txt
deleted file mode 100644
index 0120ebe93262..000000000000
--- a/Documentation/devicetree/bindings/net/brcm,amac.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Broadcom AMAC Ethernet Controller Device Tree Bindings
--------------------------------------------------------------
-
-Required properties:
- - compatible: "brcm,amac"
- "brcm,nsp-amac"
- "brcm,ns2-amac"
- - reg: Address and length of the register set for the device. It
- contains the information of registers in the same order as
- described by reg-names
- - reg-names: Names of the registers.
- "amac_base": Address and length of the GMAC registers
- "idm_base": Address and length of the GMAC IDM registers
- (required for NSP and Northstar2)
- "nicpm_base": Address and length of the NIC Port Manager
- registers (required for Northstar2)
- - interrupts: Interrupt number
-
-The MAC address will be determined using the optional properties
-defined in ethernet.txt.
-
-Examples:
-
-amac0: ethernet@18022000 {
- compatible = "brcm,nsp-amac";
- reg = <0x18022000 0x1000>,
- <0x18110000 0x1000>;
- reg-names = "amac_base", "idm_base";
- interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git a/Documentation/devicetree/bindings/net/brcm,amac.yaml b/Documentation/devicetree/bindings/net/brcm,amac.yaml
new file mode 100644
index 000000000000..8f031932c8af
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,amac.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,amac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom AMAC Ethernet Controller Device Tree Bindings
+
+maintainers:
+ - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+ - $ref: "ethernet-controller.yaml#"
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - brcm,amac
+ then:
+ properties:
+ reg:
+ maxItems: 2
+ reg-names:
+ maxItems: 2
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - brcm,nsp-amac
+ then:
+ properties:
+ reg:
+ minItems: 2
+ maxItems: 2
+ reg-names:
+ minItems: 2
+ maxItems: 2
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - brcm,ns2-amac
+ then:
+ properties:
+ reg:
+ minItems: 3
+ reg-names:
+ minItems: 3
+
+properties:
+ compatible:
+ enum:
+ - brcm,amac
+ - brcm,nsp-amac
+ - brcm,ns2-amac
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ minItems: 1
+ maxItems: 3
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: amac_base
+ - const: idm_base
+ - const: nicpm_base
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ amac0: ethernet@18022000 {
+ compatible = "brcm,nsp-amac";
+ reg = <0x18022000 0x1000>,
+ <0x18110000 0x1000>;
+ reg-names = "amac_base", "idm_base";
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 5e1064c23f41..404e76d625f1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3861,7 +3861,7 @@ M: Rafał Miłecki <rafal@milecki.pl>
M: bcm-kernel-feedback-list@broadcom.com
L: netdev@vger.kernel.org
S: Maintained
-F: Documentation/devicetree/bindings/net/brcm,amac.txt
+F: Documentation/devicetree/bindings/net/brcm,amac.yaml
F: drivers/net/ethernet/broadcom/bgmac*
F: drivers/net/ethernet/broadcom/unimac.h
--
2.25.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v4 2/2] dt-bindings: net: Convert SYSTEMPORT to YAML
2021-12-08 20:27 [PATCH v4 0/2] AMAC and SYSTEMPORT bindings YAML conversion Florian Fainelli
2021-12-08 20:28 ` [PATCH v4 1/2] dt-bindings: net: Convert AMAC to YAML Florian Fainelli
@ 2021-12-08 20:28 ` Florian Fainelli
2021-12-08 21:47 ` Rob Herring
2021-12-08 21:47 ` Rob Herring
1 sibling, 2 replies; 7+ messages in thread
From: Florian Fainelli @ 2021-12-08 20:28 UTC (permalink / raw)
To: devicetree
Cc: Florian Fainelli, David S. Miller, Jakub Kicinski, Rob Herring,
Rafał Miłecki,
maintainer:BROADCOM IPROC GBIT ETHERNET DRIVER,
open list:NETWORKING DRIVERS, open list
Convert the Broadcom SYSTEMPORT Ethernet controller Device Tree binding
to YAML.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
.../bindings/net/brcm,systemport.txt | 38 --------
.../bindings/net/brcm,systemport.yaml | 88 +++++++++++++++++++
MAINTAINERS | 1 +
3 files changed, 89 insertions(+), 38 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/brcm,systemport.txt
create mode 100644 Documentation/devicetree/bindings/net/brcm,systemport.yaml
diff --git a/Documentation/devicetree/bindings/net/brcm,systemport.txt b/Documentation/devicetree/bindings/net/brcm,systemport.txt
deleted file mode 100644
index 75736739bfdd..000000000000
--- a/Documentation/devicetree/bindings/net/brcm,systemport.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT)
-
-Required properties:
-- compatible: should be one of:
- "brcm,systemport-v1.00"
- "brcm,systemportlite-v1.00" or
- "brcm,systemport"
-- reg: address and length of the register set for the device.
-- interrupts: interrupts for the device, first cell must be for the rx
- interrupts, and the second cell should be for the transmit queues. An
- optional third interrupt cell for Wake-on-LAN can be specified
-- local-mac-address: Ethernet MAC address (48 bits) of this adapter
-- phy-mode: Should be a string describing the PHY interface to the
- Ethernet switch/PHY, see Documentation/devicetree/bindings/net/ethernet.txt
-- fixed-link: see Documentation/devicetree/bindings/net/fixed-link.txt for
- the property specific details
-
-Optional properties:
-- systemport,num-tier2-arb: number of tier 2 arbiters, an integer
-- systemport,num-tier1-arb: number of tier 1 arbiters, an integer
-- systemport,num-txq: number of HW transmit queues, an integer
-- systemport,num-rxq: number of HW receive queues, an integer
-- clocks: When provided, must be two phandles to the functional clocks nodes of
- the SYSTEMPORT block. The first phandle is the main SYSTEMPORT clock used
- during normal operation, while the second phandle is the Wake-on-LAN clock.
-- clock-names: When provided, names of the functional clock phandles, first
- name should be "sw_sysport" and second should be "sw_sysportwol".
-
-Example:
-ethernet@f04a0000 {
- compatible = "brcm,systemport-v1.00";
- reg = <0xf04a0000 0x4650>;
- local-mac-address = [ 00 11 22 33 44 55 ];
- fixed-link = <0 1 1000 0 0>;
- phy-mode = "gmii";
- interrupts = <0x0 0x16 0x0>,
- <0x0 0x17 0x0>;
-};
diff --git a/Documentation/devicetree/bindings/net/brcm,systemport.yaml b/Documentation/devicetree/bindings/net/brcm,systemport.yaml
new file mode 100644
index 000000000000..53ecec8c864e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,systemport.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,systemport.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT)
+
+maintainers:
+ - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+ compatible:
+ enum:
+ - brcm,systemport-v1.00
+ - brcm,systemportlite-v1.00
+ - brcm,systemport
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 2
+ items:
+ - description: interrupt line for RX queues
+ - description: interrupt line for TX queues
+ - description: interrupt line for Wake-on-LAN
+
+ clocks:
+ items:
+ - description: main clock
+ - description: Wake-on-LAN clock
+
+ clock-names:
+ items:
+ - const: sw_sysport
+ - const: sw_sysportwol
+
+ systemport,num-tier2-arb:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Number of tier 2 arbiters
+
+ systemport,num-tier1-arb:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Number of tier 2 arbiters
+
+ systemport,num-txq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ items:
+ - minimum: 1
+ - maximum: 32
+ description:
+ Number of HW transmit queues
+
+ systemport,num-rxq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ items:
+ - minimum: 1
+ - maximum: 32
+ description:
+ Number of HW receive queues
+
+required:
+ - reg
+ - interrupts
+ - phy-mode
+
+allOf:
+ - $ref: "ethernet-controller.yaml#"
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ ethernet@f04a0000 {
+ compatible = "brcm,systemport-v1.00";
+ reg = <0xf04a0000 0x4650>;
+ local-mac-address = [ 00 11 22 33 44 55 ];
+ phy-mode = "gmii";
+ interrupts = <0x0 0x16 0x0>,
+ <0x0 0x17 0x0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 404e76d625f1..ed8de605fe4b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3972,6 +3972,7 @@ L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/broadcom/bcmsysport.*
F: drivers/net/ethernet/broadcom/unimac.h
+F: Documentation/devicetree/bindings/net/brcm,systemport.yaml
BROADCOM TG3 GIGABIT ETHERNET DRIVER
M: Siva Reddy Kallam <siva.kallam@broadcom.com>
--
2.25.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v4 1/2] dt-bindings: net: Convert AMAC to YAML
2021-12-08 20:28 ` [PATCH v4 1/2] dt-bindings: net: Convert AMAC to YAML Florian Fainelli
@ 2021-12-08 21:45 ` Rob Herring
0 siblings, 0 replies; 7+ messages in thread
From: Rob Herring @ 2021-12-08 21:45 UTC (permalink / raw)
To: Florian Fainelli
Cc: Rob Herring, David S. Miller, Jakub Kicinski,
bcm-kernel-feedback-list, Rafał Miłecki, devicetree,
linux-kernel, netdev
On Wed, 08 Dec 2021 12:28:00 -0800, Florian Fainelli wrote:
> Convert the Broadcom AMAC Device Tree binding to YAML to help with
> schema and dtbs checking.
>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
> .../devicetree/bindings/net/brcm,amac.txt | 30 -------
> .../devicetree/bindings/net/brcm,amac.yaml | 88 +++++++++++++++++++
> MAINTAINERS | 2 +-
> 3 files changed, 89 insertions(+), 31 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/net/brcm,amac.txt
> create mode 100644 Documentation/devicetree/bindings/net/brcm,amac.yaml
>
Applied, thanks!
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v4 2/2] dt-bindings: net: Convert SYSTEMPORT to YAML
2021-12-08 20:28 ` [PATCH v4 2/2] dt-bindings: net: Convert SYSTEMPORT " Florian Fainelli
@ 2021-12-08 21:47 ` Rob Herring
2021-12-08 21:47 ` Rob Herring
1 sibling, 0 replies; 7+ messages in thread
From: Rob Herring @ 2021-12-08 21:47 UTC (permalink / raw)
To: Florian Fainelli
Cc: devicetree, David S. Miller, Jakub Kicinski,
Rafał Miłecki,
maintainer:BROADCOM IPROC GBIT ETHERNET DRIVER,
open list:NETWORKING DRIVERS, open list
On Wed, Dec 08, 2021 at 12:28:01PM -0800, Florian Fainelli wrote:
> Convert the Broadcom SYSTEMPORT Ethernet controller Device Tree binding
> to YAML.
>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
> .../bindings/net/brcm,systemport.txt | 38 --------
> .../bindings/net/brcm,systemport.yaml | 88 +++++++++++++++++++
> MAINTAINERS | 1 +
> 3 files changed, 89 insertions(+), 38 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/net/brcm,systemport.txt
> create mode 100644 Documentation/devicetree/bindings/net/brcm,systemport.yaml
>
> diff --git a/Documentation/devicetree/bindings/net/brcm,systemport.txt b/Documentation/devicetree/bindings/net/brcm,systemport.txt
> deleted file mode 100644
> index 75736739bfdd..000000000000
> --- a/Documentation/devicetree/bindings/net/brcm,systemport.txt
> +++ /dev/null
> @@ -1,38 +0,0 @@
> -* Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT)
> -
> -Required properties:
> -- compatible: should be one of:
> - "brcm,systemport-v1.00"
> - "brcm,systemportlite-v1.00" or
> - "brcm,systemport"
> -- reg: address and length of the register set for the device.
> -- interrupts: interrupts for the device, first cell must be for the rx
> - interrupts, and the second cell should be for the transmit queues. An
> - optional third interrupt cell for Wake-on-LAN can be specified
> -- local-mac-address: Ethernet MAC address (48 bits) of this adapter
> -- phy-mode: Should be a string describing the PHY interface to the
> - Ethernet switch/PHY, see Documentation/devicetree/bindings/net/ethernet.txt
> -- fixed-link: see Documentation/devicetree/bindings/net/fixed-link.txt for
> - the property specific details
> -
> -Optional properties:
> -- systemport,num-tier2-arb: number of tier 2 arbiters, an integer
> -- systemport,num-tier1-arb: number of tier 1 arbiters, an integer
> -- systemport,num-txq: number of HW transmit queues, an integer
> -- systemport,num-rxq: number of HW receive queues, an integer
> -- clocks: When provided, must be two phandles to the functional clocks nodes of
> - the SYSTEMPORT block. The first phandle is the main SYSTEMPORT clock used
> - during normal operation, while the second phandle is the Wake-on-LAN clock.
> -- clock-names: When provided, names of the functional clock phandles, first
> - name should be "sw_sysport" and second should be "sw_sysportwol".
> -
> -Example:
> -ethernet@f04a0000 {
> - compatible = "brcm,systemport-v1.00";
> - reg = <0xf04a0000 0x4650>;
> - local-mac-address = [ 00 11 22 33 44 55 ];
> - fixed-link = <0 1 1000 0 0>;
> - phy-mode = "gmii";
> - interrupts = <0x0 0x16 0x0>,
> - <0x0 0x17 0x0>;
> -};
> diff --git a/Documentation/devicetree/bindings/net/brcm,systemport.yaml b/Documentation/devicetree/bindings/net/brcm,systemport.yaml
> new file mode 100644
> index 000000000000..53ecec8c864e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/brcm,systemport.yaml
> @@ -0,0 +1,88 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/brcm,systemport.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT)
> +
> +maintainers:
> + - Florian Fainelli <f.fainelli@gmail.com>
> +
> +properties:
> + compatible:
> + enum:
> + - brcm,systemport-v1.00
> + - brcm,systemportlite-v1.00
> + - brcm,systemport
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + minItems: 2
> + items:
> + - description: interrupt line for RX queues
> + - description: interrupt line for TX queues
> + - description: interrupt line for Wake-on-LAN
> +
> + clocks:
> + items:
> + - description: main clock
> + - description: Wake-on-LAN clock
> +
> + clock-names:
> + items:
> + - const: sw_sysport
> + - const: sw_sysportwol
> +
> + systemport,num-tier2-arb:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Number of tier 2 arbiters
> +
> + systemport,num-tier1-arb:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Number of tier 2 arbiters
> +
> + systemport,num-txq:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + items:
> + - minimum: 1
> + - maximum: 32
This says you have an array of 2 entries. I'll fix up.
> + description:
> + Number of HW transmit queues
> +
> + systemport,num-rxq:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + items:
> + - minimum: 1
> + - maximum: 32
> + description:
> + Number of HW receive queues
> +
> +required:
> + - reg
> + - interrupts
> + - phy-mode
> +
> +allOf:
> + - $ref: "ethernet-controller.yaml#"
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + ethernet@f04a0000 {
> + compatible = "brcm,systemport-v1.00";
> + reg = <0xf04a0000 0x4650>;
> + local-mac-address = [ 00 11 22 33 44 55 ];
> + phy-mode = "gmii";
> + interrupts = <0x0 0x16 0x0>,
> + <0x0 0x17 0x0>;
> + fixed-link {
> + speed = <1000>;
> + full-duplex;
> + };
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 404e76d625f1..ed8de605fe4b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -3972,6 +3972,7 @@ L: netdev@vger.kernel.org
> S: Supported
> F: drivers/net/ethernet/broadcom/bcmsysport.*
> F: drivers/net/ethernet/broadcom/unimac.h
> +F: Documentation/devicetree/bindings/net/brcm,systemport.yaml
>
> BROADCOM TG3 GIGABIT ETHERNET DRIVER
> M: Siva Reddy Kallam <siva.kallam@broadcom.com>
> --
> 2.25.1
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v4 2/2] dt-bindings: net: Convert SYSTEMPORT to YAML
2021-12-08 20:28 ` [PATCH v4 2/2] dt-bindings: net: Convert SYSTEMPORT " Florian Fainelli
2021-12-08 21:47 ` Rob Herring
@ 2021-12-08 21:47 ` Rob Herring
2021-12-09 0:49 ` Florian Fainelli
1 sibling, 1 reply; 7+ messages in thread
From: Rob Herring @ 2021-12-08 21:47 UTC (permalink / raw)
To: Florian Fainelli
Cc: Jakub Kicinski, bcm-kernel-feedback-list, linux-kernel,
David S. Miller, Rafał Miłecki, netdev, Rob Herring,
devicetree
On Wed, 08 Dec 2021 12:28:01 -0800, Florian Fainelli wrote:
> Convert the Broadcom SYSTEMPORT Ethernet controller Device Tree binding
> to YAML.
>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
> .../bindings/net/brcm,systemport.txt | 38 --------
> .../bindings/net/brcm,systemport.yaml | 88 +++++++++++++++++++
> MAINTAINERS | 1 +
> 3 files changed, 89 insertions(+), 38 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/net/brcm,systemport.txt
> create mode 100644 Documentation/devicetree/bindings/net/brcm,systemport.yaml
>
Applied, thanks!
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v4 2/2] dt-bindings: net: Convert SYSTEMPORT to YAML
2021-12-08 21:47 ` Rob Herring
@ 2021-12-09 0:49 ` Florian Fainelli
0 siblings, 0 replies; 7+ messages in thread
From: Florian Fainelli @ 2021-12-09 0:49 UTC (permalink / raw)
To: Rob Herring
Cc: Jakub Kicinski, bcm-kernel-feedback-list, linux-kernel,
David S. Miller, Rafał Miłecki, netdev, Rob Herring,
devicetree
On 12/8/21 1:47 PM, Rob Herring wrote:
> On Wed, 08 Dec 2021 12:28:01 -0800, Florian Fainelli wrote:
>> Convert the Broadcom SYSTEMPORT Ethernet controller Device Tree binding
>> to YAML.
>>
>> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
>> ---
>> .../bindings/net/brcm,systemport.txt | 38 --------
>> .../bindings/net/brcm,systemport.yaml | 88 +++++++++++++++++++
>> MAINTAINERS | 1 +
>> 3 files changed, 89 insertions(+), 38 deletions(-)
>> delete mode 100644 Documentation/devicetree/bindings/net/brcm,systemport.txt
>> create mode 100644 Documentation/devicetree/bindings/net/brcm,systemport.yaml
>>
>
> Applied, thanks!
Thanks for applying the patches and fixing up my mistakes in the process.
--
Florian
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2021-12-09 0:49 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-08 20:27 [PATCH v4 0/2] AMAC and SYSTEMPORT bindings YAML conversion Florian Fainelli
2021-12-08 20:28 ` [PATCH v4 1/2] dt-bindings: net: Convert AMAC to YAML Florian Fainelli
2021-12-08 21:45 ` Rob Herring
2021-12-08 20:28 ` [PATCH v4 2/2] dt-bindings: net: Convert SYSTEMPORT " Florian Fainelli
2021-12-08 21:47 ` Rob Herring
2021-12-08 21:47 ` Rob Herring
2021-12-09 0:49 ` Florian Fainelli
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).