devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
To: Alim Akhtar <alim.akhtar@samsung.com>,
	Avri Altman <avri.altman@wdc.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Wei Xu <xuwei5@hisilicon.com>, Nishanth Menon <nm@ti.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Tero Kristo <kristo@kernel.org>,
	"James E.J. Bottomley" <jejb@linux.ibm.com>,
	"Martin K. Petersen" <martin.petersen@oracle.com>,
	Jan Kotas <jank@cadence.com>, Li Wei <liwei213@huawei.com>,
	Stanley Chu <stanley.chu@mediatek.com>,
	Yaniv Gardi <ygardi@codeaurora.org>,
	linux-scsi@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org,
	linux-mediatek@lists.infradead.org
Subject: [PATCH v2 06/15] dt-bindings: ufs: hisilicon,ufs: convert to dtschema
Date: Tue, 22 Feb 2022 15:58:45 +0100	[thread overview]
Message-ID: <20220222145854.358646-7-krzysztof.kozlowski@canonical.com> (raw)
In-Reply-To: <20220222145854.358646-1-krzysztof.kozlowski@canonical.com>

Convert the HiSilicon Universal Flash Storage (UFS) Controller to DT
schema format.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
 .../bindings/ufs/hisilicon,ufs.yaml           | 90 +++++++++++++++++++
 .../devicetree/bindings/ufs/ufs-hisi.txt      | 42 ---------
 2 files changed, 90 insertions(+), 42 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/ufs/hisilicon,ufs.yaml
 delete mode 100644 Documentation/devicetree/bindings/ufs/ufs-hisi.txt

diff --git a/Documentation/devicetree/bindings/ufs/hisilicon,ufs.yaml b/Documentation/devicetree/bindings/ufs/hisilicon,ufs.yaml
new file mode 100644
index 000000000000..3e3bf7d2df55
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/hisilicon,ufs.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/hisilicon,ufs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon Universal Flash Storage (UFS) Controller
+
+maintainers:
+  - Li Wei <liwei213@huawei.com>
+
+# Select only our matches, not all jedec,ufs
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - hisilicon,hi3660-ufs
+          - hisilicon,hi3670-ufs
+  required:
+    - compatible
+
+allOf:
+  - $ref: ufs-common.yaml
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: hisilicon,hi3660-ufs
+          - const: jedec,ufs-1.1
+      - items:
+          - enum:
+              - hisilicon,hi3670-ufs
+          - const: jedec,ufs-2.1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ref_clk
+      - const: phy_clk
+
+  reg:
+    items:
+      - description: UFS register address space
+      - description: UFS SYS CTRL register address space
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: rst
+
+required:
+  - compatible
+  - reg
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/hi3670-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ufs@ff3c0000 {
+            compatible = "hisilicon,hi3670-ufs", "jedec,ufs-2.1";
+            reg = <0x0 0xff3c0000 0x0 0x1000>,
+                  <0x0 0xff3e0000 0x0 0x1000>;
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&crg_ctrl HI3670_CLK_GATE_UFSIO_REF>,
+                     <&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>;
+            clock-names = "ref_clk", "phy_clk";
+            freq-table = <0 0>,
+                         <0 0>;
+
+            resets = <&crg_rst 0x84 12>;
+            reset-names = "rst";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ufs/ufs-hisi.txt b/Documentation/devicetree/bindings/ufs/ufs-hisi.txt
deleted file mode 100644
index 0b83df1a5418..000000000000
--- a/Documentation/devicetree/bindings/ufs/ufs-hisi.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-* Hisilicon Universal Flash Storage (UFS) Host Controller
-
-UFS nodes are defined to describe on-chip UFS hardware macro.
-Each UFS Host Controller should have its own node.
-
-Required properties:
-- compatible        : compatible list, contains one of the following -
-					"hisilicon,hi3660-ufs", "jedec,ufs-1.1" for hisi ufs
-					host controller present on Hi3660 chipset.
-					"hisilicon,hi3670-ufs", "jedec,ufs-2.1" for hisi ufs
-					host controller present on Hi3670 chipset.
-- reg               : should contain UFS register address space & UFS SYS CTRL register address,
-- interrupts        : interrupt number
-- clocks	        : List of phandle and clock specifier pairs
-- clock-names       : List of clock input name strings sorted in the same
-					order as the clocks property. "ref_clk", "phy_clk" is optional
-- freq-table-hz     : Array of <min max> operating frequencies stored in the same
-                      order as the clocks property. If this property is not
-                      defined or a value in the array is "0" then it is assumed
-                      that the frequency is set by the parent clock or a
-                      fixed rate clock source.
-- resets            : describe reset node register
-- reset-names       : reset node register, the "rst" corresponds to reset the whole UFS IP.
-
-Example:
-
-	ufs: ufs@ff3b0000 {
-		compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1";
-		/* 0: HCI standard */
-		/* 1: UFS SYS CTRL */
-		reg = <0x0 0xff3b0000 0x0 0x1000>,
-			<0x0 0xff3b1000 0x0 0x1000>;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
-			<&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
-		clock-names = "ref_clk", "phy_clk";
-		freq-table-hz = <0 0>, <0 0>;
-		/* offset: 0x84; bit: 12  */
-		resets = <&crg_rst 0x84 12>;
-		reset-names = "rst";
-	};
-- 
2.32.0


  parent reply	other threads:[~2022-02-22 15:00 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-22 14:58 [PATCH v2 00/15] dt-bindings: ufs: add common platform bindings + fixes Krzysztof Kozlowski
2022-02-22 14:58 ` [PATCH v2 01/15] dt-bindings: ufs: add common platform bindings Krzysztof Kozlowski
2022-02-25 19:26   ` Rob Herring
2022-02-27 10:24     ` Krzysztof Kozlowski
2022-02-22 14:58 ` [PATCH v2 02/15] dt-bindings: ufs: samsung,exynos-ufs: use common bindings Krzysztof Kozlowski
2022-02-25 19:26   ` Rob Herring
2022-02-22 14:58 ` [PATCH v2 03/15] dt-bindings: ufs: cdns,ufshc: convert to dtschema Krzysztof Kozlowski
2022-02-25 19:28   ` Rob Herring
2022-02-22 14:58 ` [PATCH v2 04/15] dt-bindings: ufs: drop unused/old ufs-qcom PHY bindings Krzysztof Kozlowski
2022-02-22 18:03   ` Bjorn Andersson
2022-02-25 19:32   ` Rob Herring
2022-02-22 14:58 ` [PATCH v2 05/15] dt-bindings: ufs: qcom,ufs: convert to dtschema Krzysztof Kozlowski
2022-02-22 15:01   ` Krzysztof Kozlowski
2022-02-25 19:33   ` Rob Herring
2022-02-22 14:58 ` Krzysztof Kozlowski [this message]
2022-02-25 19:34   ` [PATCH v2 06/15] dt-bindings: ufs: hisilicon,ufs: " Rob Herring
2022-02-22 14:58 ` [PATCH v2 07/15] dt-bindings: ufs: mediatek,ufs: " Krzysztof Kozlowski
2022-02-25 19:34   ` Rob Herring
2022-02-22 14:58 ` [PATCH v2 08/15] dt-bindings: ufs: snps,tc-dwc-g210: " Krzysztof Kozlowski
2022-02-25 19:35   ` Rob Herring
2022-02-22 14:58 ` [PATCH v2 09/15] scsi: ufs: deprecate 'freq-table-hz' property Krzysztof Kozlowski
2022-02-22 16:44   ` Alim Akhtar
2022-02-23  8:23     ` Krzysztof Kozlowski
2022-02-22 18:16   ` Bjorn Andersson
2022-02-23  9:15     ` Krzysztof Kozlowski
2022-02-24 16:51       ` Bjorn Andersson
2022-02-22 14:58 ` [PATCH v2 10/15] arm64: dts: hi3670: use 'freq-table' in UFS node Krzysztof Kozlowski
2022-02-22 14:58 ` [PATCH v2 11/15] arm64: dts: ti: " Krzysztof Kozlowski
2022-02-22 14:58 ` [PATCH v2 12/15] arm64: dts: qcom: " Krzysztof Kozlowski
2022-02-22 14:58 ` [PATCH v2 13/15] arm64: dts: qcom: msm8996: drop unsupported UFS vddp-ref-clk-max-microamp Krzysztof Kozlowski
2022-02-22 14:58 ` [PATCH v2 14/15] arm64: dts: qcom: msm8996: correct UFS compatible Krzysztof Kozlowski
2022-02-22 14:58 ` [PATCH v2 15/15] arm64: dts: qcom: sm8350: drop duplicated ref_clk in UFS Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220222145854.358646-7-krzysztof.kozlowski@canonical.com \
    --to=krzysztof.kozlowski@canonical.com \
    --cc=agross@kernel.org \
    --cc=alim.akhtar@samsung.com \
    --cc=avri.altman@wdc.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jank@cadence.com \
    --cc=jejb@linux.ibm.com \
    --cc=kristo@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=liwei213@huawei.com \
    --cc=martin.petersen@oracle.com \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=stanley.chu@mediatek.com \
    --cc=vigneshr@ti.com \
    --cc=xuwei5@hisilicon.com \
    --cc=ygardi@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).