From: Neil Armstrong <neil.armstrong@linaro.org>
To: Konrad Dybcio <konrad.dybcio@somainline.org>,
Andy Gross <agross@kernel.org>, Lee Jones <lee@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Mark Brown <broonie@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>
Cc: linux-gpio@vger.kernel.org,
Neil Armstrong <neil.armstrong@linaro.org>,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org
Subject: [PATCH 2/6] arm: dts: qcom: mdm9615: fix pinctrl subnodes
Date: Thu, 06 Oct 2022 09:57:59 +0000 [thread overview]
Message-ID: <20221005-mdm9615-pinctrl-yaml-v1-2-0cbc006e2a30@linaro.org> (raw)
In-Reply-To: <20221005-mdm9615-pinctrl-yaml-v1-0-0cbc006e2a30@linaro.org>
Fix the MDM9615 DT to the expected subnodes namings.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
.../boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts | 8 ++++----
arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi | 22 +++++++++++-----------
2 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
index 4e53b3d70195..30a110984597 100644
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
@@ -45,8 +45,8 @@ &msmgpio {
* - 42: IOT0_GPIO1 and SD Card Detect
*/
- gpioext1_pins: gpioext1_pins {
- pins {
+ gpioext1_pins: gpioext1-state {
+ gpioext1-pins {
pins = "gpio2";
function = "gpio";
input-enable;
@@ -54,8 +54,8 @@ pins {
};
};
- sdc_cd_pins: sdc_cd_pins {
- pins {
+ sdc_cd_pins: sdc-cd-state {
+ sdc-cd-pins {
pins = "gpio42";
function = "gpio";
drive-strength = <2>;
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
index 2fe8693dc3cd..92c8003dac25 100644
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
@@ -22,8 +22,8 @@ &msmgpio {
pinctrl-0 = <&reset_out_pins>;
pinctrl-names = "default";
- gsbi3_pins: gsbi3_pins {
- mux {
+ gsbi3_pins: gsbi3-state {
+ gsbi3-pins {
pins = "gpio8", "gpio9", "gpio10", "gpio11";
function = "gsbi3";
drive-strength = <8>;
@@ -31,8 +31,8 @@ mux {
};
};
- gsbi4_pins: gsbi4_pins {
- mux {
+ gsbi4_pins: gsbi4-state {
+ gsbi4-pins {
pins = "gpio12", "gpio13", "gpio14", "gpio15";
function = "gsbi4";
drive-strength = <8>;
@@ -40,15 +40,15 @@ mux {
};
};
- gsbi5_i2c_pins: gsbi5_i2c_pins {
- pin16 {
+ gsbi5_i2c_pins: gsbi5-i2c-state {
+ sda-pins {
pins = "gpio16";
function = "gsbi5_i2c";
drive-strength = <8>;
bias-disable;
};
- pin17 {
+ scl-pins {
pins = "gpio17";
function = "gsbi5_i2c";
drive-strength = <2>;
@@ -56,8 +56,8 @@ pin17 {
};
};
- gsbi5_uart_pins: gsbi5_uart_pins {
- mux {
+ gsbi5_uart_pins: gsbi5-uart-state {
+ gsbi5-uart-pins {
pins = "gpio18", "gpio19";
function = "gsbi5_uart";
drive-strength = <8>;
@@ -65,8 +65,8 @@ mux {
};
};
- reset_out_pins: reset_out_pins {
- pins {
+ reset_out_pins: reset-out-state {
+ reset-out-pins {
pins = "gpio66";
function = "gpio";
drive-strength = <2>;
--
b4 0.10.1
next prev parent reply other threads:[~2022-10-06 9:58 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-06 9:57 [PATCH 0/6] arm: qcom: mdm9615: second round of bindings and DT fixes Neil Armstrong
2022-10-06 9:57 ` [PATCH 1/6] dt-bindings: pinctrl: convert qcom,mdm9615-pinctrl.txt to dt-schema Neil Armstrong
2022-10-06 11:09 ` Krzysztof Kozlowski
2022-10-06 16:20 ` Neil Armstrong
2022-10-06 20:20 ` Krzysztof Kozlowski
2022-10-06 12:27 ` Rob Herring
2022-10-06 16:21 ` Neil Armstrong
2022-10-06 19:42 ` Rob Herring
2022-10-06 9:57 ` Neil Armstrong [this message]
2022-10-06 11:10 ` [PATCH 2/6] arm: dts: qcom: mdm9615: fix pinctrl subnodes Krzysztof Kozlowski
2022-10-07 19:36 ` Konrad Dybcio
2022-10-06 9:58 ` [PATCH 3/6] arm: dts: qcom: mdm9615: wp8548-mangoh-green: fix sx150xq node names and probe-reset property Neil Armstrong
2022-10-07 19:38 ` Konrad Dybcio
2022-10-10 7:45 ` Neil Armstrong
2022-10-06 9:58 ` [PATCH 4/6] dt-bindings: soc: qcom: convert non-smd RPM bindings to dt-schema Neil Armstrong
2022-10-06 19:53 ` Rob Herring
2022-10-06 9:58 ` [PATCH 5/6] dt-bindings: regulators: convert non-smd RPM Regulators " Neil Armstrong
2022-10-06 12:27 ` Rob Herring
2022-10-06 20:04 ` Rob Herring
2022-10-06 9:58 ` [PATCH 6/6] dt-bindings: soc: qcom: ipc-rpm: refer to qcom,ipc-rpm-regulator.yaml Neil Armstrong
2022-10-06 12:27 ` Rob Herring
2022-10-06 20:05 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221005-mdm9615-pinctrl-yaml-v1-2-0cbc006e2a30@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lee@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).