devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: MD Danish Anwar <danishanwar@ti.com>
To: Mathieu Poirier <mathieu.poirier@linaro.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Rob Herring <robh+dt@kernel.org>
Cc: Suman Anna <s-anna@ti.com>, Roger Quadros <rogerq@kernel.org>,
	"Andrew F . Davis" <afd@ti.com>, <nm@ti.com>, <vigneshr@ti.com>,
	<srk@ti.com>, <linux-remoteproc@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	MD Danish Anwar <danishanwar@ti.com>
Subject: [PATCH v13 2/6] remoteproc: pru: Add enum for PRU Core Identifiers.
Date: Thu, 5 Jan 2023 14:51:45 +0530	[thread overview]
Message-ID: <20230105092149.686201-3-danishanwar@ti.com> (raw)
In-Reply-To: <20230105092149.686201-1-danishanwar@ti.com>

Introducing enum pruss_pru_id for PRU Core Identifiers.
PRUSS_PRU0 indicates PRU Core 0.
PRUSS_PRU1 indicates PRU Core 1.
PRUSS_NUM_PRUS indicates the total number of PRU Cores.

Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
---
 drivers/remoteproc/pru_rproc.c |  7 ++++---
 include/linux/pruss.h          | 31 +++++++++++++++++++++++++++++++
 2 files changed, 35 insertions(+), 3 deletions(-)
 create mode 100644 include/linux/pruss.h

diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
index 128bf9912f2c..a1a208b31846 100644
--- a/drivers/remoteproc/pru_rproc.c
+++ b/drivers/remoteproc/pru_rproc.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
+#include <linux/pruss.h>
 #include <linux/pruss_driver.h>
 #include <linux/remoteproc.h>
 
@@ -438,7 +439,7 @@ static void *pru_d_da_to_va(struct pru_rproc *pru, u32 da, size_t len)
 	dram0 = pruss->mem_regions[PRUSS_MEM_DRAM0];
 	dram1 = pruss->mem_regions[PRUSS_MEM_DRAM1];
 	/* PRU1 has its local RAM addresses reversed */
-	if (pru->id == 1)
+	if (pru->id == PRUSS_PRU1)
 		swap(dram0, dram1);
 	shrd_ram = pruss->mem_regions[PRUSS_MEM_SHRD_RAM2];
 
@@ -747,14 +748,14 @@ static int pru_rproc_set_id(struct pru_rproc *pru)
 	case RTU0_IRAM_ADDR_MASK:
 		fallthrough;
 	case PRU0_IRAM_ADDR_MASK:
-		pru->id = 0;
+		pru->id = PRUSS_PRU0;
 		break;
 	case TX_PRU1_IRAM_ADDR_MASK:
 		fallthrough;
 	case RTU1_IRAM_ADDR_MASK:
 		fallthrough;
 	case PRU1_IRAM_ADDR_MASK:
-		pru->id = 1;
+		pru->id = PRUSS_PRU1;
 		break;
 	default:
 		ret = -EINVAL;
diff --git a/include/linux/pruss.h b/include/linux/pruss.h
new file mode 100644
index 000000000000..e94a81e97a4c
--- /dev/null
+++ b/include/linux/pruss.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/**
+ * PRU-ICSS Subsystem user interfaces
+ *
+ * Copyright (C) 2015-2022 Texas Instruments Incorporated - http://www.ti.com
+ *	Suman Anna <s-anna@ti.com>
+ */
+
+#ifndef __LINUX_PRUSS_H
+#define __LINUX_PRUSS_H
+
+#include <linux/device.h>
+#include <linux/types.h>
+
+#define PRU_RPROC_DRVNAME "pru-rproc"
+
+/**
+ * enum pruss_pru_id - PRU core identifiers
+ * @PRUSS_PRU0: PRU Core 0.
+ * @PRUSS_PRU1: PRU Core 1.
+ * @PRUSS_NUM_PRUS: Total number of PRU Cores available.
+ *
+ */
+
+enum pruss_pru_id {
+	PRUSS_PRU0 = 0,
+	PRUSS_PRU1,
+	PRUSS_NUM_PRUS,
+};
+
+#endif /* __LINUX_PRUSS_H */
-- 
2.25.1


  parent reply	other threads:[~2023-01-05  9:22 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-05  9:21 [PATCH v13 0/6] Introduce PRU remoteproc consumer API MD Danish Anwar
2023-01-05  9:21 ` [PATCH v13 1/6] dt-bindings: remoteproc: Add PRU consumer bindings MD Danish Anwar
2023-01-05  9:21 ` MD Danish Anwar [this message]
2023-01-05 20:23   ` [PATCH v13 2/6] remoteproc: pru: Add enum for PRU Core Identifiers Mathieu Poirier
2023-01-06 12:02     ` [EXTERNAL] " Md Danish Anwar
2023-01-05  9:21 ` [PATCH v13 3/6] remoteproc: pru: Add APIs to get and put the PRU cores MD Danish Anwar
2023-01-05  9:21 ` [PATCH v13 4/6] remoteproc: pru: Make sysfs entries read-only for PRU client driven boots MD Danish Anwar
2023-01-05  9:21 ` [PATCH v13 5/6] remoteproc: pru: Add pru_rproc_set_ctable() function MD Danish Anwar
2023-01-05  9:21 ` [PATCH v13 6/6] remoteproc: pru: Configure firmware based on client setup MD Danish Anwar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230105092149.686201-3-danishanwar@ti.com \
    --to=danishanwar@ti.com \
    --cc=afd@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mathieu.poirier@linaro.org \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=rogerq@kernel.org \
    --cc=s-anna@ti.com \
    --cc=srk@ti.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).