* [PATCH v4] dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format @ 2020-02-13 12:39 ` Dafna Hirschfeld 2020-02-17 10:38 ` Chanwoo Choi 0 siblings, 1 reply; 4+ messages in thread From: Dafna Hirschfeld @ 2020-02-13 12:39 UTC (permalink / raw) To: devicetree Cc: myungjoo.ham, cw00.choi, robh+dt, mark.rutland, bleung, enric.balletbo, groeck, linux-kernel, dafna.hirschfeld, helen.koike, ezequiel, kernel, dafna3 convert the binding file extcon-usbc-cros-ec.txt to yaml format extcon-usbc-cros-ec.yaml This was tested and verified on ARM with: make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> --- Changes since v1: 1 - changing the license to (GPL-2.0-only OR BSD-2-Clause) 2 - changing the maintainers 3 - changing the google,usb-port-id property to have minimum 0 and maximum 255 Changes since v2: 1 - Changing the patch subject to start with "dt-bindings: extcon: usbc-cros-ec:" 2 - In the example, adding a parent isp node, a reg field to cros-ec@0 and adding nodes 'extcon0/1' instead of one node 'extcon'. Changes since v3: in the example, changing the node isp1 to spi0 .../bindings/extcon/extcon-usbc-cros-ec.txt | 24 -------- .../bindings/extcon/extcon-usbc-cros-ec.yaml | 56 +++++++++++++++++++ 2 files changed, 56 insertions(+), 24 deletions(-) delete mode 100644 Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt create mode 100644 Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt deleted file mode 100644 index 8e8625c00dfa..000000000000 --- a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt +++ /dev/null @@ -1,24 +0,0 @@ -ChromeOS EC USB Type-C cable and accessories detection - -On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is -able to detect the state of external accessories such as display adapters -or USB devices when said accessories are attached or detached. - -The node for this device must be under a cros-ec node like google,cros-ec-spi -or google,cros-ec-i2c. - -Required properties: -- compatible: Should be "google,extcon-usbc-cros-ec". -- google,usb-port-id: Specifies the USB port ID to use. - -Example: - cros-ec@0 { - compatible = "google,cros-ec-i2c"; - - ... - - extcon { - compatible = "google,extcon-usbc-cros-ec"; - google,usb-port-id = <0>; - }; - } diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml new file mode 100644 index 000000000000..9c5849b341ea --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/extcon-usbc-cros-ec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChromeOS EC USB Type-C cable and accessories detection + +maintainers: + - Benson Leung <bleung@chromium.org> + - Enric Balletbo i Serra <enric.balletbo@collabora.com> + +description: | + On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is + able to detect the state of external accessories such as display adapters + or USB devices when said accessories are attached or detached. + The node for this device must be under a cros-ec node like google,cros-ec-spi + or google,cros-ec-i2c. + +properties: + compatible: + const: google,extcon-usbc-cros-ec + + google,usb-port-id: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + description: the port id + minimum: 0 + maximum: 255 + +required: + - compatible + - google,usb-port-id + +additionalProperties: false + +examples: + - | + spi0 { + #address-cells = <1>; + #size-cells = <0>; + cros-ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + + usbc_extcon0: extcon0 { + compatible = "google,extcon-usbc-cros-ec"; + google,usb-port-id = <0>; + }; + + usbc_extcon1: extcon1 { + compatible = "google,extcon-usbc-cros-ec"; + google,usb-port-id = <1>; + }; + }; + }; -- 2.17.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v4] dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format 2020-02-13 12:39 ` [PATCH v4] dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format Dafna Hirschfeld @ 2020-02-17 10:38 ` Chanwoo Choi 2020-02-19 2:20 ` Rob Herring 0 siblings, 1 reply; 4+ messages in thread From: Chanwoo Choi @ 2020-02-17 10:38 UTC (permalink / raw) To: Dafna Hirschfeld, devicetree Cc: myungjoo.ham, robh+dt, mark.rutland, bleung, enric.balletbo, groeck, linux-kernel, helen.koike, ezequiel, kernel, dafna3 On 2/13/20 9:39 PM, Dafna Hirschfeld wrote: > convert the binding file extcon-usbc-cros-ec.txt to > yaml format extcon-usbc-cros-ec.yaml > > This was tested and verified on ARM with: > make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml > make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml > > Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> > Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> > --- > Changes since v1: > 1 - changing the license to (GPL-2.0-only OR BSD-2-Clause) > 2 - changing the maintainers > 3 - changing the google,usb-port-id property to have minimum 0 and maximum 255 > > Changes since v2: > 1 - Changing the patch subject to start with "dt-bindings: extcon: usbc-cros-ec:" > 2 - In the example, adding a parent isp node, a reg field to cros-ec@0 > and adding nodes 'extcon0/1' instead of one node 'extcon'. > > Changes since v3: > in the example, changing the node isp1 to spi0 > > .../bindings/extcon/extcon-usbc-cros-ec.txt | 24 -------- > .../bindings/extcon/extcon-usbc-cros-ec.yaml | 56 +++++++++++++++++++ > 2 files changed, 56 insertions(+), 24 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt > create mode 100644 Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml > > diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt > deleted file mode 100644 > index 8e8625c00dfa..000000000000 > --- a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt > +++ /dev/null > @@ -1,24 +0,0 @@ > -ChromeOS EC USB Type-C cable and accessories detection > - > -On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is > -able to detect the state of external accessories such as display adapters > -or USB devices when said accessories are attached or detached. > - > -The node for this device must be under a cros-ec node like google,cros-ec-spi > -or google,cros-ec-i2c. > - > -Required properties: > -- compatible: Should be "google,extcon-usbc-cros-ec". > -- google,usb-port-id: Specifies the USB port ID to use. > - > -Example: > - cros-ec@0 { > - compatible = "google,cros-ec-i2c"; > - > - ... > - > - extcon { > - compatible = "google,extcon-usbc-cros-ec"; > - google,usb-port-id = <0>; > - }; > - } > diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml > new file mode 100644 > index 000000000000..9c5849b341ea > --- /dev/null > +++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml > @@ -0,0 +1,56 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: https://protect2.fireeye.com/url?k=d3c63a24-8e5dc647-d3c7b16b-0cc47a31cdbc-e8d8e2b7806aed8e&u=http://devicetree.org/schemas/extcon/extcon-usbc-cros-ec.yaml# > +$schema: https://protect2.fireeye.com/url?k=04f78247-596c7e24-04f60908-0cc47a31cdbc-1b9a3937c161a4b6&u=http://devicetree.org/meta-schemas/core.yaml# > + > +title: ChromeOS EC USB Type-C cable and accessories detection > + > +maintainers: > + - Benson Leung <bleung@chromium.org> > + - Enric Balletbo i Serra <enric.balletbo@collabora.com> > + > +description: | > + On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is > + able to detect the state of external accessories such as display adapters > + or USB devices when said accessories are attached or detached. > + The node for this device must be under a cros-ec node like google,cros-ec-spi > + or google,cros-ec-i2c. > + > +properties: > + compatible: > + const: google,extcon-usbc-cros-ec > + > + google,usb-port-id: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32 > + description: the port id > + minimum: 0 > + maximum: 255 > + > +required: > + - compatible > + - google,usb-port-id > + > +additionalProperties: false > + > +examples: > + - | > + spi0 { > + #address-cells = <1>; > + #size-cells = <0>; > + cros-ec@0 { > + compatible = "google,cros-ec-spi"; > + reg = <0>; > + > + usbc_extcon0: extcon0 { > + compatible = "google,extcon-usbc-cros-ec"; > + google,usb-port-id = <0>; > + }; > + > + usbc_extcon1: extcon1 { > + compatible = "google,extcon-usbc-cros-ec"; > + google,usb-port-id = <1>; > + }; > + }; > + }; > Applied it. Thanks. -- Best Regards, Chanwoo Choi Samsung Electronics ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v4] dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format 2020-02-17 10:38 ` Chanwoo Choi @ 2020-02-19 2:20 ` Rob Herring 2020-02-19 4:20 ` Chanwoo Choi 0 siblings, 1 reply; 4+ messages in thread From: Rob Herring @ 2020-02-19 2:20 UTC (permalink / raw) To: Chanwoo Choi Cc: Dafna Hirschfeld, devicetree, MyungJoo Ham, Mark Rutland, Benson Leung, Enric Balletbo i Serra, Guenter Roeck, linux-kernel, Helen Koike, Ezequiel Garcia, Collabora Kernel ML, dafna3 On Mon, Feb 17, 2020 at 4:30 AM Chanwoo Choi <cw00.choi@samsung.com> wrote: > > On 2/13/20 9:39 PM, Dafna Hirschfeld wrote: > > convert the binding file extcon-usbc-cros-ec.txt to > > yaml format extcon-usbc-cros-ec.yaml > > > > This was tested and verified on ARM with: > > make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml > > make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml > > > > Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> > > Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> > > --- > > Changes since v1: > > 1 - changing the license to (GPL-2.0-only OR BSD-2-Clause) > > 2 - changing the maintainers > > 3 - changing the google,usb-port-id property to have minimum 0 and maximum 255 > > > > Changes since v2: > > 1 - Changing the patch subject to start with "dt-bindings: extcon: usbc-cros-ec:" > > 2 - In the example, adding a parent isp node, a reg field to cros-ec@0 > > and adding nodes 'extcon0/1' instead of one node 'extcon'. > > > > Changes since v3: > > in the example, changing the node isp1 to spi0 > > > > .../bindings/extcon/extcon-usbc-cros-ec.txt | 24 -------- > > .../bindings/extcon/extcon-usbc-cros-ec.yaml | 56 +++++++++++++++++++ > > 2 files changed, 56 insertions(+), 24 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt > > create mode 100644 Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml > > > > diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt > > deleted file mode 100644 > > index 8e8625c00dfa..000000000000 > > --- a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt > > +++ /dev/null > > @@ -1,24 +0,0 @@ > > -ChromeOS EC USB Type-C cable and accessories detection > > - > > -On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is > > -able to detect the state of external accessories such as display adapters > > -or USB devices when said accessories are attached or detached. > > - > > -The node for this device must be under a cros-ec node like google,cros-ec-spi > > -or google,cros-ec-i2c. > > - > > -Required properties: > > -- compatible: Should be "google,extcon-usbc-cros-ec". > > -- google,usb-port-id: Specifies the USB port ID to use. > > - > > -Example: > > - cros-ec@0 { > > - compatible = "google,cros-ec-i2c"; > > - > > - ... > > - > > - extcon { > > - compatible = "google,extcon-usbc-cros-ec"; > > - google,usb-port-id = <0>; > > - }; > > - } > > diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml > > new file mode 100644 > > index 000000000000..9c5849b341ea > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml > > @@ -0,0 +1,56 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: https://protect2.fireeye.com/url?k=d3c63a24-8e5dc647-d3c7b16b-0cc47a31cdbc-e8d8e2b7806aed8e&u=http://devicetree.org/schemas/extcon/extcon-usbc-cros-ec.yaml# > > +$schema: https://protect2.fireeye.com/url?k=04f78247-596c7e24-04f60908-0cc47a31cdbc-1b9a3937c161a4b6&u=http://devicetree.org/meta-schemas/core.yaml# ^^^ > > + > > +title: ChromeOS EC USB Type-C cable and accessories detection > > + > > +maintainers: > > + - Benson Leung <bleung@chromium.org> > > + - Enric Balletbo i Serra <enric.balletbo@collabora.com> > > + > > +description: | > > + On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is > > + able to detect the state of external accessories such as display adapters > > + or USB devices when said accessories are attached or detached. > > + The node for this device must be under a cros-ec node like google,cros-ec-spi > > + or google,cros-ec-i2c. > > + > > +properties: > > + compatible: > > + const: google,extcon-usbc-cros-ec > > + > > + google,usb-port-id: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32 > > + description: the port id > > + minimum: 0 > > + maximum: 255 > > + > > +required: > > + - compatible > > + - google,usb-port-id > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + spi0 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + cros-ec@0 { > > + compatible = "google,cros-ec-spi"; > > + reg = <0>; > > + > > + usbc_extcon0: extcon0 { > > + compatible = "google,extcon-usbc-cros-ec"; > > + google,usb-port-id = <0>; > > + }; > > + > > + usbc_extcon1: extcon1 { > > + compatible = "google,extcon-usbc-cros-ec"; > > + google,usb-port-id = <1>; > > + }; > > + }; > > + }; > > > > Applied it. Thanks. And once again corrupted it when applying it: Documentation/devicetree/bindings/Makefile:12: recipe for target 'Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.example.dts' failed Traceback (most recent call last): File "/usr/local/lib/python3.6/dist-packages/jsonschema/validators.py", line 774, in resolve_from_url document = self.store[url] File "/usr/local/lib/python3.6/dist-packages/jsonschema/_utils.py", line 22, in __getitem__ return self.store[self.normalize(uri)] KeyError: 'https://protect2.fireeye.com/url?k=04f78247-596c7e24-04f60908-0cc47a31cdbc-1b9a3937c161a4b6&u=http://devicetree.org/meta-schemas/core.yaml' ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v4] dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format 2020-02-19 2:20 ` Rob Herring @ 2020-02-19 4:20 ` Chanwoo Choi 0 siblings, 0 replies; 4+ messages in thread From: Chanwoo Choi @ 2020-02-19 4:20 UTC (permalink / raw) To: Rob Herring Cc: Dafna Hirschfeld, devicetree, MyungJoo Ham, Mark Rutland, Benson Leung, Enric Balletbo i Serra, Guenter Roeck, linux-kernel, Helen Koike, Ezequiel Garcia, Collabora Kernel ML, dafna3 On 2/19/20 11:20 AM, Rob Herring wrote: > On Mon, Feb 17, 2020 at 4:30 AM Chanwoo Choi <cw00.choi@samsung.com> wrote: >> >> On 2/13/20 9:39 PM, Dafna Hirschfeld wrote: >>> convert the binding file extcon-usbc-cros-ec.txt to >>> yaml format extcon-usbc-cros-ec.yaml >>> >>> This was tested and verified on ARM with: >>> make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml >>> make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml >>> >>> Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> >>> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> >>> --- >>> Changes since v1: >>> 1 - changing the license to (GPL-2.0-only OR BSD-2-Clause) >>> 2 - changing the maintainers >>> 3 - changing the google,usb-port-id property to have minimum 0 and maximum 255 >>> >>> Changes since v2: >>> 1 - Changing the patch subject to start with "dt-bindings: extcon: usbc-cros-ec:" >>> 2 - In the example, adding a parent isp node, a reg field to cros-ec@0 >>> and adding nodes 'extcon0/1' instead of one node 'extcon'. >>> >>> Changes since v3: >>> in the example, changing the node isp1 to spi0 >>> >>> .../bindings/extcon/extcon-usbc-cros-ec.txt | 24 -------- >>> .../bindings/extcon/extcon-usbc-cros-ec.yaml | 56 +++++++++++++++++++ >>> 2 files changed, 56 insertions(+), 24 deletions(-) >>> delete mode 100644 Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt >>> create mode 100644 Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml >>> >>> diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt >>> deleted file mode 100644 >>> index 8e8625c00dfa..000000000000 >>> --- a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt >>> +++ /dev/null >>> @@ -1,24 +0,0 @@ >>> -ChromeOS EC USB Type-C cable and accessories detection >>> - >>> -On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is >>> -able to detect the state of external accessories such as display adapters >>> -or USB devices when said accessories are attached or detached. >>> - >>> -The node for this device must be under a cros-ec node like google,cros-ec-spi >>> -or google,cros-ec-i2c. >>> - >>> -Required properties: >>> -- compatible: Should be "google,extcon-usbc-cros-ec". >>> -- google,usb-port-id: Specifies the USB port ID to use. >>> - >>> -Example: >>> - cros-ec@0 { >>> - compatible = "google,cros-ec-i2c"; >>> - >>> - ... >>> - >>> - extcon { >>> - compatible = "google,extcon-usbc-cros-ec"; >>> - google,usb-port-id = <0>; >>> - }; >>> - } >>> diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml >>> new file mode 100644 >>> index 000000000000..9c5849b341ea >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml >>> @@ -0,0 +1,56 @@ >>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>> +%YAML 1.2 >>> +--- >>> +$id: https://protect2.fireeye.com/url?k=d3c63a24-8e5dc647-d3c7b16b-0cc47a31cdbc-e8d8e2b7806aed8e&u=http://devicetree.org/schemas/extcon/extcon-usbc-cros-ec.yaml# >>> +$schema: https://protect2.fireeye.com/url?k=04f78247-596c7e24-04f60908-0cc47a31cdbc-1b9a3937c161a4b6&u=http://devicetree.org/meta-schemas/core.yaml# > > ^^^ > >>> + >>> +title: ChromeOS EC USB Type-C cable and accessories detection >>> + >>> +maintainers: >>> + - Benson Leung <bleung@chromium.org> >>> + - Enric Balletbo i Serra <enric.balletbo@collabora.com> >>> + >>> +description: | >>> + On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is >>> + able to detect the state of external accessories such as display adapters >>> + or USB devices when said accessories are attached or detached. >>> + The node for this device must be under a cros-ec node like google,cros-ec-spi >>> + or google,cros-ec-i2c. >>> + >>> +properties: >>> + compatible: >>> + const: google,extcon-usbc-cros-ec >>> + >>> + google,usb-port-id: >>> + allOf: >>> + - $ref: /schemas/types.yaml#/definitions/uint32 >>> + description: the port id >>> + minimum: 0 >>> + maximum: 255 >>> + >>> +required: >>> + - compatible >>> + - google,usb-port-id >>> + >>> +additionalProperties: false >>> + >>> +examples: >>> + - | >>> + spi0 { >>> + #address-cells = <1>; >>> + #size-cells = <0>; >>> + cros-ec@0 { >>> + compatible = "google,cros-ec-spi"; >>> + reg = <0>; >>> + >>> + usbc_extcon0: extcon0 { >>> + compatible = "google,extcon-usbc-cros-ec"; >>> + google,usb-port-id = <0>; >>> + }; >>> + >>> + usbc_extcon1: extcon1 { >>> + compatible = "google,extcon-usbc-cros-ec"; >>> + google,usb-port-id = <1>; >>> + }; >>> + }; >>> + }; >>> >> >> Applied it. Thanks. > > And once again corrupted it when applying it: > > Documentation/devicetree/bindings/Makefile:12: recipe for target > 'Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.example.dts' > failed > Traceback (most recent call last): > File "/usr/local/lib/python3.6/dist-packages/jsonschema/validators.py", > line 774, in resolve_from_url > document = self.store[url] > File "/usr/local/lib/python3.6/dist-packages/jsonschema/_utils.py", > line 22, in __getitem__ > return self.store[self.normalize(uri)] > KeyError: 'https://protect2.fireeye.com/url?k=04f78247-596c7e24-04f60908-0cc47a31cdbc-1b9a3937c161a4b6&u=http://devicetree.org/meta-schemas/core.yaml' > > I'm sorry for that. It was added by company firewall system automatically when I applied it to git. It was my mistake. I'll edit them and pushed again. Thanks. -- Best Regards, Chanwoo Choi Samsung Electronics ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-02-19 4:12 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <CGME20200213123953epcas1p45c39830a9ec6bd535f5370702f603806@epcas1p4.samsung.com>
2020-02-13 12:39 ` [PATCH v4] dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format Dafna Hirschfeld
2020-02-17 10:38 ` Chanwoo Choi
2020-02-19 2:20 ` Rob Herring
2020-02-19 4:20 ` Chanwoo Choi
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).