devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: "Jernej Škrabec" <jernej.skrabec@gmail.com>
Cc: mripard@kernel.org, wens@csie.org, robh+dt@kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
	Michael Klein <michael@fossekall.de>,
	Hans Verkuil <hverkuil-cisco@xs4all.nl>
Subject: Re: [PATCH v2] ARM: dts: sun8i: Adjust power key nodes
Date: Tue, 15 Feb 2022 14:20:27 -0800	[thread overview]
Message-ID: <23df0d53-d530-2363-09c9-5be2b2306a81@roeck-us.net> (raw)
In-Reply-To: <4714494.31r3eYUQgx@kista>

On 2/15/22 12:34, Jernej Škrabec wrote:
> Hi!
> 
> Dne torek, 15. februar 2022 ob 01:27:32 CET je Guenter Roeck napisal(a):
>> Hi,
>>
>> On Mon, Nov 29, 2021 at 05:55:10PM +0100, Jernej Skrabec wrote:
>>> Several H3 and one H2+ board have power key nodes, which are slightly
>>> off. Some are missing wakeup-source property and some have BTN_0 code
>>> assigned instead of KEY_POWER.
>>>
>>> Adjust them, so they can function as intended by designer.
>>>
>>> Co-developed-by: Michael Klein <michael@fossekall.de>
>>> Signed-off-by: Michael Klein <michael@fossekall.de>
>>> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
>>
>> This patch results in the following traceback when rebooting an
>> orangepi-pc qemu emulation.
>>
>> [   30.899594]
>> [   30.899685] ============================================
>> [   30.899757] WARNING: possible recursive locking detected
>> [   30.899938] 5.17.0-rc3-00394-gc849047c2473 #1 Not tainted
>> [   30.900055] --------------------------------------------
>> [   30.900124] init/307 is trying to acquire lock:
>> [   30.900246] c2dfe27c (&irq_desc_lock_class){-.-.}-{2:2}, at:
> __irq_get_desc_lock+0x58/0xa0
>> [   30.900900]
>> [   30.900900] but task is already holding lock:
>> [   30.900974] c3c0ac7c (&irq_desc_lock_class){-.-.}-{2:2}, at:
> __irq_get_desc_lock+0x58/0xa0
>> [   30.901101]
>> [   30.901101] other info that might help us debug this:
>> [   30.901188]  Possible unsafe locking scenario:
>> [   30.901188]
>> [   30.901262]        CPU0
>> [   30.901301]        ----
>> [   30.901339]   lock(&irq_desc_lock_class);
>> [   30.901411]   lock(&irq_desc_lock_class);
>> [   30.901480]
>> [   30.901480]  *** DEADLOCK ***
>> [   30.901480]
>> [   30.901554]  May be due to missing lock nesting notation
>> [   30.901554]
>> [   30.901657] 4 locks held by init/307:
>> [   30.901724]  #0: c1f29f18 (system_transition_mutex){+.+.}-{3:3}, at:
> __do_sys_reboot+0x90/0x23c
>> [   30.901889]  #1: c20f7760 (&dev->mutex){....}-{3:3}, at:
> device_shutdown+0xf4/0x224
>> [   30.902016]  #2: c2e804d8 (&dev->mutex){....}-{3:3}, at:
> device_shutdown+0x104/0x224
>> [   30.902138]  #3: c3c0ac7c (&irq_desc_lock_class){-.-.}-{2:2}, at:
> __irq_get_desc_lock+0x58/0xa0
>> [   30.902281]
>> [   30.902281] stack backtrace:
>> [   30.902462] CPU: 0 PID: 307 Comm: init Not tainted 5.17.0-rc3-00394-
> gc849047c2473 #1
>> [   30.902572] Hardware name: Allwinner sun8i Family
>> [   30.902781]  unwind_backtrace from show_stack+0x10/0x14
>> [   30.902895]  show_stack from dump_stack_lvl+0x68/0x90
>> [   30.902970]  dump_stack_lvl from __lock_acquire+0x1680/0x31a0
>> [   30.903047]  __lock_acquire from lock_acquire+0x148/0x3dc
>> [   30.903118]  lock_acquire from _raw_spin_lock_irqsave+0x50/0x6c
>> [   30.903197]  _raw_spin_lock_irqsave from __irq_get_desc_lock+0x58/0xa0
>> [   30.903282]  __irq_get_desc_lock from irq_set_irq_wake+0x2c/0x19c
>> [   30.903366]  irq_set_irq_wake from irq_set_irq_wake+0x13c/0x19c
>> [   30.903442]  irq_set_irq_wake from gpio_keys_suspend+0x80/0x1a4
>> [   30.903523]  gpio_keys_suspend from gpio_keys_shutdown+0x10/0x2c
>> [   30.903603]  gpio_keys_shutdown from device_shutdown+0x180/0x224
>> [   30.903685]  device_shutdown from __do_sys_reboot+0x134/0x23c
>> [   30.903764]  __do_sys_reboot from ret_fast_syscall+0x0/0x1c
>> [   30.903894] Exception stack(0xc584ffa8 to 0xc584fff0)
>> [   30.904013] ffa0:                   01234567 000c623f fee1dead 28121969
> 01234567 00000000
>> [   30.904117] ffc0: 01234567 000c623f 00000001 00000058 000d85c0 00000000
> 00000000 00000000
>> [   30.904213] ffe0: 000d8298 be84ddf4 000918bc b6eb0edc
>> [   30.905189] reboot: Restarting system
>>
>> The warning is no longer seen after reverting this patch.
>>
>> The problem exists but is not seen in v5.17-rc4 because a bug in commit
>> 8df89a7cbc63 ("pinctrl-sunxi: don't call pinctrl_gpio_direction()")
>> hides it. That problem is fixed with commit 3c5412cdec9f ("pinctrl-sunxi:
>> sunxi_pinctrl_gpio_direction_in/output: use correct offset") in linux-next,
>> and the traceback is seen there.
> 
> Hm... These DT changes were tested with many users on older kernels for some
> time now and new properties conform to bindings. Should we revert pinctrl
> changes?
> 

I don't think those changes were tested with orangepi-pc on real hardware.
Maybe I didn't explain it clearly enough: Commit 8df89a7cbc63 does _not_
introduce the problem. It hides the problem. Reverting commit 8df89a7cbc63
won't help but result in exactly the same backtrace (I tried).

Some more details: This commit introduces "wakeup-source;" to various
orangepi-pc nodes. This triggers in a call to sunxi_pinctrl_irq_set_wake(),
which did not happen before and which may result in the traceback.

Guenter

  reply	other threads:[~2022-02-15 22:20 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-29 16:55 [PATCH v2] ARM: dts: sun8i: Adjust power key nodes Jernej Skrabec
2021-11-29 17:16 ` Chen-Yu Tsai
2021-11-29 17:29   ` Jernej Škrabec
2021-11-29 17:35     ` Chen-Yu Tsai
2021-12-01  8:21 ` (subset) " Maxime Ripard
2022-02-15  0:27 ` Guenter Roeck
2022-02-15 20:34   ` Jernej Škrabec
2022-02-15 22:20     ` Guenter Roeck [this message]
2022-02-16  4:11       ` Samuel Holland
2022-02-16  4:26         ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=23df0d53-d530-2363-09c9-5be2b2306a81@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=devicetree@vger.kernel.org \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=jernej.skrabec@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=michael@fossekall.de \
    --cc=mripard@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).