* [PATCH 1/7] arm64: zynqmp: Enable iio-hwmon for ina226 on zcu100
2020-01-09 14:02 [PATCH 0/7] arm64: zynqmp: Enable iio-hwmon based on iio ina226 driver with labels Michal Simek
@ 2020-01-09 14:02 ` Michal Simek
2020-01-09 14:02 ` [PATCH 2/7] arm64: zynqmp: Enable iio-hwmon for ina226 on zcu111 Michal Simek
` (6 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Michal Simek @ 2020-01-09 14:02 UTC (permalink / raw)
To: linux-arm-kernel, git
Cc: Anurag Kumar Vulisha, Jan Kiszka, Mark Rutland, Rajan Vaja,
Rob Herring, Ulf Hansson, devicetree, linux-kernel
ina226 hwmon driver is deprecated and it is recommended to use new iio
based driver. The patch is enabling iio-hwmon driver to export
functionality from IIO to hwmon interface to be able to use lm-sensors
package.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index a109e82982ae..d60110ad8367 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -103,6 +103,11 @@ sdio_pwrseq: sdio-pwrseq {
reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */
post-power-on-delay-ms = <10>;
};
+
+ ina226 {
+ compatible = "iio-hwmon";
+ io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>;
+ };
};
&dcc {
@@ -191,8 +196,9 @@ i2csw_5: i2c@5 {
#size-cells = <0>;
reg = <5>;
/* PS_PMBUS */
- ina226@40 { /* u35 */
+ u35: ina226@40 { /* u35 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x40>;
shunt-resistor = <10000>;
/* MIO31 is alert which should be routed to PMUFW */
--
2.24.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 2/7] arm64: zynqmp: Enable iio-hwmon for ina226 on zcu111
2020-01-09 14:02 [PATCH 0/7] arm64: zynqmp: Enable iio-hwmon based on iio ina226 driver with labels Michal Simek
2020-01-09 14:02 ` [PATCH 1/7] arm64: zynqmp: Enable iio-hwmon for ina226 on zcu100 Michal Simek
@ 2020-01-09 14:02 ` Michal Simek
2020-01-09 14:02 ` [PATCH 3/7] arm64: zynqmp: Add label property to all " Michal Simek
` (5 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Michal Simek @ 2020-01-09 14:02 UTC (permalink / raw)
To: linux-arm-kernel, git
Cc: Anurag Kumar Vulisha, Harini Katakam, Mark Rutland, Rajan Vaja,
Rob Herring, Venkatesh Yadav Abbarapu, devicetree, linux-kernel
ina226 hwmon driver is deprecated and it is recommended to use new iio
based driver. The patch is enabling iio-hwmon driver to export
functionality from IIO to hwmon interface to be able to use lm-sensors
package.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
.../boot/dts/xilinx/zynqmp-zcu111-revA.dts | 99 ++++++++++++++++---
1 file changed, 85 insertions(+), 14 deletions(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index cb2e46833a7b..df2bc5a41c8d 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -59,6 +59,63 @@ heartbeat-led {
linux,default-trigger = "heartbeat";
};
};
+
+ ina226-u67 {
+ compatible = "iio-hwmon";
+ io-channels = <&u67 0>, <&u67 1>, <&u67 2>, <&u67 3>;
+ };
+ ina226-u59 {
+ compatible = "iio-hwmon";
+ io-channels = <&u59 0>, <&u59 1>, <&u59 2>, <&u59 3>;
+ };
+ ina226-u61 {
+ compatible = "iio-hwmon";
+ io-channels = <&u61 0>, <&u61 1>, <&u61 2>, <&u61 3>;
+ };
+ ina226-u60 {
+ compatible = "iio-hwmon";
+ io-channels = <&u60 0>, <&u60 1>, <&u60 2>, <&u60 3>;
+ };
+ ina226-u64 {
+ compatible = "iio-hwmon";
+ io-channels = <&u64 0>, <&u64 1>, <&u64 2>, <&u64 3>;
+ };
+ ina226-u69 {
+ compatible = "iio-hwmon";
+ io-channels = <&u69 0>, <&u69 1>, <&u69 2>, <&u69 3>;
+ };
+ ina226-u66 {
+ compatible = "iio-hwmon";
+ io-channels = <&u66 0>, <&u66 1>, <&u66 2>, <&u66 3>;
+ };
+ ina226-u65 {
+ compatible = "iio-hwmon";
+ io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+ };
+ ina226-u63 {
+ compatible = "iio-hwmon";
+ io-channels = <&u63 0>, <&u63 1>, <&u63 2>, <&u63 3>;
+ };
+ ina226-u3 {
+ compatible = "iio-hwmon";
+ io-channels = <&u3 0>, <&u3 1>, <&u3 2>, <&u3 3>;
+ };
+ ina226-u71 {
+ compatible = "iio-hwmon";
+ io-channels = <&u71 0>, <&u71 1>, <&u71 2>, <&u71 3>;
+ };
+ ina226-u77 {
+ compatible = "iio-hwmon";
+ io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
+ };
+ ina226-u73 {
+ compatible = "iio-hwmon";
+ io-channels = <&u73 0>, <&u73 1>, <&u73 2>, <&u73 3>;
+ };
+ ina226-u79 {
+ compatible = "iio-hwmon";
+ io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
+ };
};
&dcc {
@@ -152,73 +209,87 @@ i2c@0 {
reg = <0>;
/* PS_PMBUS */
/* PMBUS_ALERT done via pca9544 */
- ina226@40 { /* u67 */
+ u67: ina226@40 { /* u67 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x40>;
shunt-resistor = <2000>;
};
- ina226@41 { /* u59 */
+ u59: ina226@41 { /* u59 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x41>;
shunt-resistor = <5000>;
};
- ina226@42 { /* u61 */
+ u61: ina226@42 { /* u61 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x42>;
shunt-resistor = <5000>;
};
- ina226@43 { /* u60 */
+ u60: ina226@43 { /* u60 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x43>;
shunt-resistor = <5000>;
};
- ina226@45 { /* u64 */
+ u64: ina226@45 { /* u64 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x45>;
shunt-resistor = <5000>;
};
- ina226@46 { /* u69 */
+ u69: ina226@46 { /* u69 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x46>;
shunt-resistor = <2000>;
};
- ina226@47 { /* u66 */
+ u66: ina226@47 { /* u66 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x47>;
shunt-resistor = <5000>;
};
- ina226@48 { /* u65 */
+ u65: ina226@48 { /* u65 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x48>;
shunt-resistor = <5000>;
};
- ina226@49 { /* u63 */
+ u63: ina226@49 { /* u63 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x49>;
shunt-resistor = <5000>;
};
- ina226@4a { /* u3 */
+ u3: ina226@4a { /* u3 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x4a>;
shunt-resistor = <5000>;
};
- ina226@4b { /* u71 */
+ u71: ina226@4b { /* u71 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x4b>;
shunt-resistor = <5000>;
};
- ina226@4c { /* u77 */
+ u77: ina226@4c { /* u77 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x4c>;
shunt-resistor = <5000>;
};
- ina226@4d { /* u73 */
+ u73: ina226@4d { /* u73 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x4d>;
shunt-resistor = <5000>;
};
- ina226@4e { /* u79 */
+ u79: ina226@4e { /* u79 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x4e>;
shunt-resistor = <5000>;
};
--
2.24.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 3/7] arm64: zynqmp: Add label property to all ina226 on zcu111
2020-01-09 14:02 [PATCH 0/7] arm64: zynqmp: Enable iio-hwmon based on iio ina226 driver with labels Michal Simek
2020-01-09 14:02 ` [PATCH 1/7] arm64: zynqmp: Enable iio-hwmon for ina226 on zcu100 Michal Simek
2020-01-09 14:02 ` [PATCH 2/7] arm64: zynqmp: Enable iio-hwmon for ina226 on zcu111 Michal Simek
@ 2020-01-09 14:02 ` Michal Simek
2020-01-09 14:02 ` [PATCH 4/7] arm64: zynqmp: Enable iio-hwmon for ina226 on zcu102 Michal Simek
` (4 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Michal Simek @ 2020-01-09 14:02 UTC (permalink / raw)
To: linux-arm-kernel, git
Cc: Anurag Kumar Vulisha, Harini Katakam, Mark Rutland, Rajan Vaja,
Rob Herring, Venkatesh Yadav Abbarapu, devicetree, linux-kernel
Label property is adding capability to distiguish chips from each other
when iio framework is used.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index df2bc5a41c8d..2e92634c77f9 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -212,84 +212,98 @@ i2c@0 {
u67: ina226@40 { /* u67 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u67";
reg = <0x40>;
shunt-resistor = <2000>;
};
u59: ina226@41 { /* u59 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u59";
reg = <0x41>;
shunt-resistor = <5000>;
};
u61: ina226@42 { /* u61 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u61";
reg = <0x42>;
shunt-resistor = <5000>;
};
u60: ina226@43 { /* u60 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u60";
reg = <0x43>;
shunt-resistor = <5000>;
};
u64: ina226@45 { /* u64 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u64";
reg = <0x45>;
shunt-resistor = <5000>;
};
u69: ina226@46 { /* u69 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u69";
reg = <0x46>;
shunt-resistor = <2000>;
};
u66: ina226@47 { /* u66 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u66";
reg = <0x47>;
shunt-resistor = <5000>;
};
u65: ina226@48 { /* u65 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u65";
reg = <0x48>;
shunt-resistor = <5000>;
};
u63: ina226@49 { /* u63 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u63";
reg = <0x49>;
shunt-resistor = <5000>;
};
u3: ina226@4a { /* u3 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u3";
reg = <0x4a>;
shunt-resistor = <5000>;
};
u71: ina226@4b { /* u71 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u71";
reg = <0x4b>;
shunt-resistor = <5000>;
};
u77: ina226@4c { /* u77 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u77";
reg = <0x4c>;
shunt-resistor = <5000>;
};
u73: ina226@4d { /* u73 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u73";
reg = <0x4d>;
shunt-resistor = <5000>;
};
u79: ina226@4e { /* u79 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u79";
reg = <0x4e>;
shunt-resistor = <5000>;
};
--
2.24.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 4/7] arm64: zynqmp: Enable iio-hwmon for ina226 on zcu102
2020-01-09 14:02 [PATCH 0/7] arm64: zynqmp: Enable iio-hwmon based on iio ina226 driver with labels Michal Simek
` (2 preceding siblings ...)
2020-01-09 14:02 ` [PATCH 3/7] arm64: zynqmp: Add label property to all " Michal Simek
@ 2020-01-09 14:02 ` Michal Simek
2020-01-09 14:02 ` [PATCH 5/7] arm64: zynqmp: Add label property to all " Michal Simek
` (3 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Michal Simek @ 2020-01-09 14:02 UTC (permalink / raw)
To: linux-arm-kernel, git
Cc: Anurag Kumar Vulisha, Harini Katakam, Mark Rutland, Rajan Vaja,
Rob Herring, devicetree, linux-kernel
ina226 hwmon driver is deprecated and it is recommended to use new iio
based driver. The patch is enabling iio-hwmon driver to export
functionality from IIO to hwmon interface to be able to use lm-sensors
package.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
.../boot/dts/xilinx/zynqmp-zcu102-revA.dts | 127 +++++++++++++++---
1 file changed, 109 insertions(+), 18 deletions(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 845671447f60..afdd0ff37900 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -59,6 +59,79 @@ heartbeat-led {
linux,default-trigger = "heartbeat";
};
};
+
+ ina226-u76 {
+ compatible = "iio-hwmon";
+ io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>;
+ };
+ ina226-u77 {
+ compatible = "iio-hwmon";
+ io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
+ };
+ ina226-u78 {
+ compatible = "iio-hwmon";
+ io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>;
+ };
+ ina226-u87 {
+ compatible = "iio-hwmon";
+ io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>;
+ };
+ ina226-u85 {
+ compatible = "iio-hwmon";
+ io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>;
+ };
+ ina226-u86 {
+ compatible = "iio-hwmon";
+ io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>;
+ };
+ ina226-u93 {
+ compatible = "iio-hwmon";
+ io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>;
+ };
+ ina226-u88 {
+ compatible = "iio-hwmon";
+ io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>;
+ };
+ ina226-u15 {
+ compatible = "iio-hwmon";
+ io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>;
+ };
+ ina226-u92 {
+ compatible = "iio-hwmon";
+ io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>;
+ };
+ ina226-u79 {
+ compatible = "iio-hwmon";
+ io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
+ };
+ ina226-u81 {
+ compatible = "iio-hwmon";
+ io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>;
+ };
+ ina226-u80 {
+ compatible = "iio-hwmon";
+ io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>;
+ };
+ ina226-u84 {
+ compatible = "iio-hwmon";
+ io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>;
+ };
+ ina226-u16 {
+ compatible = "iio-hwmon";
+ io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>;
+ };
+ ina226-u65 {
+ compatible = "iio-hwmon";
+ io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+ };
+ ina226-u74 {
+ compatible = "iio-hwmon";
+ io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>;
+ };
+ ina226-u75 {
+ compatible = "iio-hwmon";
+ io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
+ };
};
&can1 {
@@ -177,53 +250,63 @@ i2c@0 {
#size-cells = <0>;
reg = <0>;
/* PS_PMBUS */
- ina226@40 { /* u76 */
+ u76: ina226@40 { /* u76 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x40>;
shunt-resistor = <5000>;
};
- ina226@41 { /* u77 */
+ u77: ina226@41 { /* u77 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x41>;
shunt-resistor = <5000>;
};
- ina226@42 { /* u78 */
+ u78: ina226@42 { /* u78 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x42>;
shunt-resistor = <5000>;
};
- ina226@43 { /* u87 */
+ u87: ina226@43 { /* u87 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x43>;
shunt-resistor = <5000>;
};
- ina226@44 { /* u85 */
+ u85: ina226@44 { /* u85 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x44>;
shunt-resistor = <5000>;
};
- ina226@45 { /* u86 */
+ u86: ina226@45 { /* u86 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x45>;
shunt-resistor = <5000>;
};
- ina226@46 { /* u93 */
+ u93: ina226@46 { /* u93 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x46>;
shunt-resistor = <5000>;
};
- ina226@47 { /* u88 */
+ u88: ina226@47 { /* u88 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x47>;
shunt-resistor = <5000>;
};
- ina226@4a { /* u15 */
+ u15: ina226@4a { /* u15 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x4a>;
shunt-resistor = <5000>;
};
- ina226@4b { /* u92 */
+ u92: ina226@4b { /* u92 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x4b>;
shunt-resistor = <5000>;
};
@@ -233,43 +316,51 @@ i2c@1 {
#size-cells = <0>;
reg = <1>;
/* PL_PMBUS */
- ina226@40 { /* u79 */
+ u79: ina226@40 { /* u79 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x40>;
shunt-resistor = <2000>;
};
- ina226@41 { /* u81 */
+ u81: ina226@41 { /* u81 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x41>;
shunt-resistor = <5000>;
};
- ina226@42 { /* u80 */
+ u80: ina226@42 { /* u80 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x42>;
shunt-resistor = <5000>;
};
- ina226@43 { /* u84 */
+ u84: ina226@43 { /* u84 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x43>;
shunt-resistor = <5000>;
};
- ina226@44 { /* u16 */
+ u16: ina226@44 { /* u16 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x44>;
shunt-resistor = <5000>;
};
- ina226@45 { /* u65 */
+ u65: ina226@45 { /* u65 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x45>;
shunt-resistor = <5000>;
};
- ina226@46 { /* u74 */
+ u74: ina226@46 { /* u74 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x46>;
shunt-resistor = <5000>;
};
- ina226@47 { /* u75 */
+ u75: ina226@47 { /* u75 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x47>;
shunt-resistor = <5000>;
};
--
2.24.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 5/7] arm64: zynqmp: Add label property to all ina226 on zcu102
2020-01-09 14:02 [PATCH 0/7] arm64: zynqmp: Enable iio-hwmon based on iio ina226 driver with labels Michal Simek
` (3 preceding siblings ...)
2020-01-09 14:02 ` [PATCH 4/7] arm64: zynqmp: Enable iio-hwmon for ina226 on zcu102 Michal Simek
@ 2020-01-09 14:02 ` Michal Simek
2020-01-09 14:02 ` [PATCH 6/7] arm64: zynqmp: Enable iio-hwmon for ina226 on zcu106 Michal Simek
` (2 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Michal Simek @ 2020-01-09 14:02 UTC (permalink / raw)
To: linux-arm-kernel, git
Cc: Anurag Kumar Vulisha, Harini Katakam, Mark Rutland, Rajan Vaja,
Rob Herring, devicetree, linux-kernel
Label property is adding capability to distiguish chips from each other
when iio framework is used.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
.../boot/dts/xilinx/zynqmp-zcu102-revA.dts | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index afdd0ff37900..4f801721564f 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -253,60 +253,70 @@ i2c@0 {
u76: ina226@40 { /* u76 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u76";
reg = <0x40>;
shunt-resistor = <5000>;
};
u77: ina226@41 { /* u77 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u77";
reg = <0x41>;
shunt-resistor = <5000>;
};
u78: ina226@42 { /* u78 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u78";
reg = <0x42>;
shunt-resistor = <5000>;
};
u87: ina226@43 { /* u87 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u87";
reg = <0x43>;
shunt-resistor = <5000>;
};
u85: ina226@44 { /* u85 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u85";
reg = <0x44>;
shunt-resistor = <5000>;
};
u86: ina226@45 { /* u86 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u86";
reg = <0x45>;
shunt-resistor = <5000>;
};
u93: ina226@46 { /* u93 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u93";
reg = <0x46>;
shunt-resistor = <5000>;
};
u88: ina226@47 { /* u88 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u88";
reg = <0x47>;
shunt-resistor = <5000>;
};
u15: ina226@4a { /* u15 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u15";
reg = <0x4a>;
shunt-resistor = <5000>;
};
u92: ina226@4b { /* u92 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u92";
reg = <0x4b>;
shunt-resistor = <5000>;
};
@@ -319,48 +329,56 @@ i2c@1 {
u79: ina226@40 { /* u79 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u79";
reg = <0x40>;
shunt-resistor = <2000>;
};
u81: ina226@41 { /* u81 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u81";
reg = <0x41>;
shunt-resistor = <5000>;
};
u80: ina226@42 { /* u80 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u80";
reg = <0x42>;
shunt-resistor = <5000>;
};
u84: ina226@43 { /* u84 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u84";
reg = <0x43>;
shunt-resistor = <5000>;
};
u16: ina226@44 { /* u16 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u16";
reg = <0x44>;
shunt-resistor = <5000>;
};
u65: ina226@45 { /* u65 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u65";
reg = <0x45>;
shunt-resistor = <5000>;
};
u74: ina226@46 { /* u74 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u74";
reg = <0x46>;
shunt-resistor = <5000>;
};
u75: ina226@47 { /* u75 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u75";
reg = <0x47>;
shunt-resistor = <5000>;
};
--
2.24.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 6/7] arm64: zynqmp: Enable iio-hwmon for ina226 on zcu106
2020-01-09 14:02 [PATCH 0/7] arm64: zynqmp: Enable iio-hwmon based on iio ina226 driver with labels Michal Simek
` (4 preceding siblings ...)
2020-01-09 14:02 ` [PATCH 5/7] arm64: zynqmp: Add label property to all " Michal Simek
@ 2020-01-09 14:02 ` Michal Simek
2020-01-09 14:02 ` [PATCH 7/7] arm64: zynqmp: Add label property to all " Michal Simek
2020-01-21 9:50 ` [PATCH 0/7] arm64: zynqmp: Enable iio-hwmon based on iio ina226 driver with labels Michal Simek
7 siblings, 0 replies; 9+ messages in thread
From: Michal Simek @ 2020-01-09 14:02 UTC (permalink / raw)
To: linux-arm-kernel, git
Cc: Anurag Kumar Vulisha, Harini Katakam, Mark Rutland, Rajan Vaja,
Rob Herring, devicetree, linux-kernel
ina226 hwmon driver is deprecated and it is recommended to use new iio
based driver. The patch is enabling iio-hwmon driver to export
functionality from IIO to hwmon interface to be able to use lm-sensors
package.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
.../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 127 +++++++++++++++---
1 file changed, 109 insertions(+), 18 deletions(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 822de6f04725..d136ce1fb07e 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -59,6 +59,79 @@ heartbeat-led {
linux,default-trigger = "heartbeat";
};
};
+
+ ina226-u76 {
+ compatible = "iio-hwmon";
+ io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>;
+ };
+ ina226-u77 {
+ compatible = "iio-hwmon";
+ io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
+ };
+ ina226-u78 {
+ compatible = "iio-hwmon";
+ io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>;
+ };
+ ina226-u87 {
+ compatible = "iio-hwmon";
+ io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>;
+ };
+ ina226-u85 {
+ compatible = "iio-hwmon";
+ io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>;
+ };
+ ina226-u86 {
+ compatible = "iio-hwmon";
+ io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>;
+ };
+ ina226-u93 {
+ compatible = "iio-hwmon";
+ io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>;
+ };
+ ina226-u88 {
+ compatible = "iio-hwmon";
+ io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>;
+ };
+ ina226-u15 {
+ compatible = "iio-hwmon";
+ io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>;
+ };
+ ina226-u92 {
+ compatible = "iio-hwmon";
+ io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>;
+ };
+ ina226-u79 {
+ compatible = "iio-hwmon";
+ io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
+ };
+ ina226-u81 {
+ compatible = "iio-hwmon";
+ io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>;
+ };
+ ina226-u80 {
+ compatible = "iio-hwmon";
+ io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>;
+ };
+ ina226-u84 {
+ compatible = "iio-hwmon";
+ io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>;
+ };
+ ina226-u16 {
+ compatible = "iio-hwmon";
+ io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>;
+ };
+ ina226-u65 {
+ compatible = "iio-hwmon";
+ io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+ };
+ ina226-u74 {
+ compatible = "iio-hwmon";
+ io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>;
+ };
+ ina226-u75 {
+ compatible = "iio-hwmon";
+ io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
+ };
};
&can1 {
@@ -177,53 +250,63 @@ i2c@0 {
#size-cells = <0>;
reg = <0>;
/* PS_PMBUS */
- ina226@40 { /* u76 */
+ u76: ina226@40 { /* u76 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x40>;
shunt-resistor = <5000>;
};
- ina226@41 { /* u77 */
+ u77: ina226@41 { /* u77 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x41>;
shunt-resistor = <5000>;
};
- ina226@42 { /* u78 */
+ u78: ina226@42 { /* u78 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x42>;
shunt-resistor = <5000>;
};
- ina226@43 { /* u87 */
+ u87: ina226@43 { /* u87 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x43>;
shunt-resistor = <5000>;
};
- ina226@44 { /* u85 */
+ u85: ina226@44 { /* u85 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x44>;
shunt-resistor = <5000>;
};
- ina226@45 { /* u86 */
+ u86: ina226@45 { /* u86 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x45>;
shunt-resistor = <5000>;
};
- ina226@46 { /* u93 */
+ u93: ina226@46 { /* u93 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x46>;
shunt-resistor = <5000>;
};
- ina226@47 { /* u88 */
+ u88: ina226@47 { /* u88 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x47>;
shunt-resistor = <5000>;
};
- ina226@4a { /* u15 */
+ u15: ina226@4a { /* u15 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x4a>;
shunt-resistor = <5000>;
};
- ina226@4b { /* u92 */
+ u92: ina226@4b { /* u92 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x4b>;
shunt-resistor = <5000>;
};
@@ -233,43 +316,51 @@ i2c@1 {
#size-cells = <0>;
reg = <1>;
/* PL_PMBUS */
- ina226@40 { /* u79 */
+ u79: ina226@40 { /* u79 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x40>;
shunt-resistor = <2000>;
};
- ina226@41 { /* u81 */
+ u81: ina226@41 { /* u81 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x41>;
shunt-resistor = <5000>;
};
- ina226@42 { /* u80 */
+ u80: ina226@42 { /* u80 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x42>;
shunt-resistor = <5000>;
};
- ina226@43 { /* u84 */
+ u84: ina226@43 { /* u84 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x43>;
shunt-resistor = <5000>;
};
- ina226@44 { /* u16 */
+ u16: ina226@44 { /* u16 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x44>;
shunt-resistor = <5000>;
};
- ina226@45 { /* u65 */
+ u65: ina226@45 { /* u65 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x45>;
shunt-resistor = <5000>;
};
- ina226@46 { /* u74 */
+ u74: ina226@46 { /* u74 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x46>;
shunt-resistor = <5000>;
};
- ina226@47 { /* u75 */
+ u75: ina226@47 { /* u75 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x47>;
shunt-resistor = <5000>;
};
--
2.24.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 7/7] arm64: zynqmp: Add label property to all ina226 on zcu106
2020-01-09 14:02 [PATCH 0/7] arm64: zynqmp: Enable iio-hwmon based on iio ina226 driver with labels Michal Simek
` (5 preceding siblings ...)
2020-01-09 14:02 ` [PATCH 6/7] arm64: zynqmp: Enable iio-hwmon for ina226 on zcu106 Michal Simek
@ 2020-01-09 14:02 ` Michal Simek
2020-01-21 9:50 ` [PATCH 0/7] arm64: zynqmp: Enable iio-hwmon based on iio ina226 driver with labels Michal Simek
7 siblings, 0 replies; 9+ messages in thread
From: Michal Simek @ 2020-01-09 14:02 UTC (permalink / raw)
To: linux-arm-kernel, git
Cc: Anurag Kumar Vulisha, Harini Katakam, Mark Rutland, Rajan Vaja,
Rob Herring, devicetree, linux-kernel
Label property is adding capability to distiguish chips from each other
when iio framework is used.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
.../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index d136ce1fb07e..6e9efe233838 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -253,60 +253,70 @@ i2c@0 {
u76: ina226@40 { /* u76 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u76";
reg = <0x40>;
shunt-resistor = <5000>;
};
u77: ina226@41 { /* u77 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u77";
reg = <0x41>;
shunt-resistor = <5000>;
};
u78: ina226@42 { /* u78 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u78";
reg = <0x42>;
shunt-resistor = <5000>;
};
u87: ina226@43 { /* u87 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u87";
reg = <0x43>;
shunt-resistor = <5000>;
};
u85: ina226@44 { /* u85 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u85";
reg = <0x44>;
shunt-resistor = <5000>;
};
u86: ina226@45 { /* u86 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u86";
reg = <0x45>;
shunt-resistor = <5000>;
};
u93: ina226@46 { /* u93 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u93";
reg = <0x46>;
shunt-resistor = <5000>;
};
u88: ina226@47 { /* u88 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u88";
reg = <0x47>;
shunt-resistor = <5000>;
};
u15: ina226@4a { /* u15 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u15";
reg = <0x4a>;
shunt-resistor = <5000>;
};
u92: ina226@4b { /* u92 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u92";
reg = <0x4b>;
shunt-resistor = <5000>;
};
@@ -319,48 +329,56 @@ i2c@1 {
u79: ina226@40 { /* u79 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u79";
reg = <0x40>;
shunt-resistor = <2000>;
};
u81: ina226@41 { /* u81 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u81";
reg = <0x41>;
shunt-resistor = <5000>;
};
u80: ina226@42 { /* u80 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u80";
reg = <0x42>;
shunt-resistor = <5000>;
};
u84: ina226@43 { /* u84 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u84";
reg = <0x43>;
shunt-resistor = <5000>;
};
u16: ina226@44 { /* u16 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u16";
reg = <0x44>;
shunt-resistor = <5000>;
};
u65: ina226@45 { /* u65 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u65";
reg = <0x45>;
shunt-resistor = <5000>;
};
u74: ina226@46 { /* u74 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u74";
reg = <0x46>;
shunt-resistor = <5000>;
};
u75: ina226@47 { /* u75 */
compatible = "ti,ina226";
#io-channel-cells = <1>;
+ label = "ina226-u75";
reg = <0x47>;
shunt-resistor = <5000>;
};
--
2.24.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH 0/7] arm64: zynqmp: Enable iio-hwmon based on iio ina226 driver with labels
2020-01-09 14:02 [PATCH 0/7] arm64: zynqmp: Enable iio-hwmon based on iio ina226 driver with labels Michal Simek
` (6 preceding siblings ...)
2020-01-09 14:02 ` [PATCH 7/7] arm64: zynqmp: Add label property to all " Michal Simek
@ 2020-01-21 9:50 ` Michal Simek
7 siblings, 0 replies; 9+ messages in thread
From: Michal Simek @ 2020-01-21 9:50 UTC (permalink / raw)
To: linux-arm, git
Cc: Anurag Kumar Vulisha, Harini Katakam, Jan Kiszka, Mark Rutland,
Rajan Vaja, Rob Herring, Ulf Hansson, Venkatesh Yadav Abbarapu,
DTML, LKML
čt 9. 1. 2020 v 15:02 odesílatel Michal Simek <michal.simek@xilinx.com> napsal:
>
> Hi,
>
> the patch 2c3d0c9ffd24 ("iio: core: Add optional symbolic label to device attributes")
> added support for labelling IIO devices that's why I can enable iio based
> ina226 driver with label property.
>
> Thanks,
> Michal
>
>
> Michal Simek (7):
> arm64: zynqmp: Enable iio-hwmon for ina226 on zcu100
> arm64: zynqmp: Enable iio-hwmon for ina226 on zcu111
> arm64: zynqmp: Add label property to all ina226 on zcu111
> arm64: zynqmp: Enable iio-hwmon for ina226 on zcu102
> arm64: zynqmp: Add label property to all ina226 on zcu102
> arm64: zynqmp: Enable iio-hwmon for ina226 on zcu106
> arm64: zynqmp: Add label property to all ina226 on zcu106
>
> .../boot/dts/xilinx/zynqmp-zcu100-revC.dts | 8 +-
> .../boot/dts/xilinx/zynqmp-zcu102-revA.dts | 145 +++++++++++++++---
> .../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 145 +++++++++++++++---
> .../boot/dts/xilinx/zynqmp-zcu111-revA.dts | 113 ++++++++++++--
> 4 files changed, 360 insertions(+), 51 deletions(-)
>
> --
> 2.24.0
>
Applied.
M
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
^ permalink raw reply [flat|nested] 9+ messages in thread