* [PATCH v2 0/7] ARM: dts: Add new Exynos3250-based ARTIK5 module dtsi file
@ 2016-03-15 2:08 Chanwoo Choi
2016-03-15 2:08 ` [PATCH v2 1/7] clk: samsung: exynos3250: Add UART2 clock Chanwoo Choi
` (5 more replies)
0 siblings, 6 replies; 17+ messages in thread
From: Chanwoo Choi @ 2016-03-15 2:08 UTC (permalink / raw)
To: k.kozlowski, kgene, s.nawrocki, tomasz.figa
Cc: jh80.chung, andi.shyti, inki.dae, sw0312.kim, pankaj.dubey,
cw00.choi, linux-samsung-soc, linux-arm-kernel, linux-kernel,
devicetree
This patchset add the support for Device Tree source for Samsung ARTIK5 module[1]
based on Exynos3250 SoC and development board[2]. The ARTIK5 module includes
the follwoing devices:
- Application Processor (Samsung Exynos3250)
- WiFi/BT Combo chip
- PMIC (Samsung S2MPS14)
- eMMC (4GB)
- DRAM LPDDR3 (512MB)
- Connectors pin (60 Pins x 3 set)
Also, this patchset add the ARTIK5 development board[2] dts file which includes
the ARTIK5 module[1] and have the devices such as sound codec, sd card port,
ethernet port, uart port and so on.
[1] https://www.artik.io/hardware/artik-5
[2] http://www.digikey.com/product-detail/en/SIP-KITNXB001/1510-1316-ND/5825102
Changes from v1:
(https://lkml.org/lkml/2016/3/13/215)
- Change the board name from 'artik5-devel' to 'artik5-eval'
- Merge the patch6/7/8 to patch5
- Add the new board information to samsung-boards.txt[1]
[1] Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
- Fix minor coding style issue and remove 'wakeup' property
- Remove 'broken-cd' and 'desc-num' property from mshc_0 node
- Handle the LDO11/LDO12 by using XMMC0CDn pin (GPK0-2 gpio) for MMC device
and fix the ldo number of 'vmmc-supply' property.
- Add the 'vqmmc-supply' property for MSHC2
- Drop the patch10 for PPMU node
- Add the new patch to initialize the MMC2 gpio pin on monk board
Chanwoo Choi (4):
clk: samsung: exynos3250: Add MMC2 clock
ARM: dts: Add MSHC2 dt node for Exynos3250 SoC
ARM: dts: Add exynos3250-artik5 dtsi file for ARTIK5 module
ARM: dts: Add initial gpio setting of MMC2 device for exynos3250-monk
Jaehoon Chung (1):
ARM: dts: Add MSHC2 dt node for SD card for exynos3250-artik5-eval board
Pankaj Dubey (2):
clk: samsung: exynos3250: Add UART2 clock
ARM: dts: Add UART2 dt node for Exynos3250 SoC
.../bindings/arm/samsung/samsung-boards.txt | 2 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/exynos3250-artik5-eval.dts | 43 +++
arch/arm/boot/dts/exynos3250-artik5.dtsi | 334 +++++++++++++++++++++
arch/arm/boot/dts/exynos3250-monk.dts | 12 +-
arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 42 +++
arch/arm/boot/dts/exynos3250.dtsi | 25 ++
drivers/clk/samsung/clk-exynos3250.c | 15 +
include/dt-bindings/clock/exynos3250.h | 11 +-
9 files changed, 483 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/boot/dts/exynos3250-artik5-eval.dts
create mode 100644 arch/arm/boot/dts/exynos3250-artik5.dtsi
--
1.9.1
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v2 1/7] clk: samsung: exynos3250: Add UART2 clock
2016-03-15 2:08 [PATCH v2 0/7] ARM: dts: Add new Exynos3250-based ARTIK5 module dtsi file Chanwoo Choi
@ 2016-03-15 2:08 ` Chanwoo Choi
2016-03-15 2:08 ` [PATCH v2 2/7] clk: samsung: exynos3250: Add MMC2 clock Chanwoo Choi
` (4 subsequent siblings)
5 siblings, 0 replies; 17+ messages in thread
From: Chanwoo Choi @ 2016-03-15 2:08 UTC (permalink / raw)
To: k.kozlowski, kgene, s.nawrocki, tomasz.figa
Cc: jh80.chung, andi.shyti, inki.dae, sw0312.kim, pankaj.dubey,
cw00.choi, linux-samsung-soc, linux-arm-kernel, linux-kernel,
devicetree
From: Pankaj Dubey <pankaj.dubey@samsung.com>
This patch add the UART2 clocks (mux, divider, gate) of Exynos3250 SoC.
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
drivers/clk/samsung/clk-exynos3250.c | 6 ++++++
include/dt-bindings/clock/exynos3250.h | 6 +++++-
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/samsung/clk-exynos3250.c b/drivers/clk/samsung/clk-exynos3250.c
index fdd41b17a24f..bc60e399d1bc 100644
--- a/drivers/clk/samsung/clk-exynos3250.c
+++ b/drivers/clk/samsung/clk-exynos3250.c
@@ -306,6 +306,7 @@ static struct samsung_mux_clock mux_clks[] __initdata = {
MUX(CLK_MOUT_MMC0, "mout_mmc0", group_sclk_p, SRC_FSYS, 0, 4),
/* SRC_PERIL0 */
+ MUX(CLK_MOUT_UART2, "mout_uart2", group_sclk_p, SRC_PERIL0, 8, 4),
MUX(CLK_MOUT_UART1, "mout_uart1", group_sclk_p, SRC_PERIL0, 4, 4),
MUX(CLK_MOUT_UART0, "mout_uart0", group_sclk_p, SRC_PERIL0, 0, 4),
@@ -390,6 +391,7 @@ static struct samsung_div_clock div_clks[] __initdata = {
DIV(CLK_DIV_MMC0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
/* DIV_PERIL0 */
+ DIV(CLK_DIV_UART2, "div_uart2", "mout_uart2", DIV_PERIL0, 8, 4),
DIV(CLK_DIV_UART1, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4),
DIV(CLK_DIV_UART0, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4),
@@ -552,6 +554,9 @@ static struct samsung_gate_clock gate_clks[] __initdata = {
GATE_SCLK_PERIL, 7, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_SPI0, "sclk_spi0", "div_spi0_pre",
GATE_SCLK_PERIL, 6, CLK_SET_RATE_PARENT, 0),
+
+ GATE(CLK_SCLK_UART2, "sclk_uart2", "div_uart2",
+ GATE_SCLK_PERIL, 2, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_UART1, "sclk_uart1", "div_uart1",
GATE_SCLK_PERIL, 1, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0",
@@ -649,6 +654,7 @@ static struct samsung_gate_clock gate_clks[] __initdata = {
GATE(CLK_I2C2, "i2c2", "div_aclk_100", GATE_IP_PERIL, 8, 0, 0),
GATE(CLK_I2C1, "i2c1", "div_aclk_100", GATE_IP_PERIL, 7, 0, 0),
GATE(CLK_I2C0, "i2c0", "div_aclk_100", GATE_IP_PERIL, 6, 0, 0),
+ GATE(CLK_UART2, "uart2", "div_aclk_100", GATE_IP_PERIL, 2, 0, 0),
GATE(CLK_UART1, "uart1", "div_aclk_100", GATE_IP_PERIL, 1, 0, 0),
GATE(CLK_UART0, "uart0", "div_aclk_100", GATE_IP_PERIL, 0, 0, 0),
};
diff --git a/include/dt-bindings/clock/exynos3250.h b/include/dt-bindings/clock/exynos3250.h
index 63d01c15d2b3..ddb874130d86 100644
--- a/include/dt-bindings/clock/exynos3250.h
+++ b/include/dt-bindings/clock/exynos3250.h
@@ -79,6 +79,7 @@
#define CLK_MOUT_CORE 58
#define CLK_MOUT_APLL 59
#define CLK_MOUT_ACLK_266_SUB 60
+#define CLK_MOUT_UART2 61
/* Dividers */
#define CLK_DIV_GPL 64
@@ -127,6 +128,7 @@
#define CLK_DIV_CORE 107
#define CLK_DIV_HPM 108
#define CLK_DIV_COPY 109
+#define CLK_DIV_UART2 110
/* Gates */
#define CLK_ASYNC_G3D 128
@@ -223,6 +225,7 @@
#define CLK_BLOCK_MFC 219
#define CLK_BLOCK_CAM 220
#define CLK_SMIES 221
+#define CLK_UART2 222
/* Special clocks */
#define CLK_SCLK_JPEG 224
@@ -249,12 +252,13 @@
#define CLK_SCLK_SPI0 245
#define CLK_SCLK_UART1 246
#define CLK_SCLK_UART0 247
+#define CLK_SCLK_UART2 248
/*
* Total number of clocks of main CMU.
* NOTE: Must be equal to last clock ID increased by one.
*/
-#define CLK_NR_CLKS 248
+#define CLK_NR_CLKS 249
/*
* CMU DMC
--
1.9.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v2 2/7] clk: samsung: exynos3250: Add MMC2 clock
2016-03-15 2:08 [PATCH v2 0/7] ARM: dts: Add new Exynos3250-based ARTIK5 module dtsi file Chanwoo Choi
2016-03-15 2:08 ` [PATCH v2 1/7] clk: samsung: exynos3250: Add UART2 clock Chanwoo Choi
@ 2016-03-15 2:08 ` Chanwoo Choi
[not found] ` <1458007695-3627-1-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
` (3 subsequent siblings)
5 siblings, 0 replies; 17+ messages in thread
From: Chanwoo Choi @ 2016-03-15 2:08 UTC (permalink / raw)
To: k.kozlowski, kgene, s.nawrocki, tomasz.figa
Cc: jh80.chung, andi.shyti, inki.dae, sw0312.kim, pankaj.dubey,
cw00.choi, linux-samsung-soc, linux-arm-kernel, linux-kernel,
devicetree
This patch add the MMC2 clocks (mux, divider, gate) of Exynos3250 SoC.
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
drivers/clk/samsung/clk-exynos3250.c | 9 +++++++++
include/dt-bindings/clock/exynos3250.h | 7 ++++++-
2 files changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/samsung/clk-exynos3250.c b/drivers/clk/samsung/clk-exynos3250.c
index bc60e399d1bc..16575ee874cb 100644
--- a/drivers/clk/samsung/clk-exynos3250.c
+++ b/drivers/clk/samsung/clk-exynos3250.c
@@ -302,6 +302,7 @@ static struct samsung_mux_clock mux_clks[] __initdata = {
/* SRC_FSYS */
MUX(CLK_MOUT_TSADC, "mout_tsadc", group_sclk_p, SRC_FSYS, 28, 4),
+ MUX(CLK_MOUT_MMC2, "mout_mmc2", group_sclk_p, SRC_FSYS, 8, 4),
MUX(CLK_MOUT_MMC1, "mout_mmc1", group_sclk_p, SRC_FSYS, 4, 4),
MUX(CLK_MOUT_MMC0, "mout_mmc0", group_sclk_p, SRC_FSYS, 0, 4),
@@ -390,6 +391,11 @@ static struct samsung_div_clock div_clks[] __initdata = {
CLK_SET_RATE_PARENT, 0),
DIV(CLK_DIV_MMC0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
+ /* DIV_FSYS2 */
+ DIV_F(CLK_DIV_MMC2_PRE, "div_mmc2_pre", "div_mmc2", DIV_FSYS2, 8, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV(CLK_DIV_MMC2, "div_mmc2", "mout_mmc2", DIV_FSYS2, 0, 4),
+
/* DIV_PERIL0 */
DIV(CLK_DIV_UART2, "div_uart2", "mout_uart2", DIV_PERIL0, 8, 4),
DIV(CLK_DIV_UART1, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4),
@@ -540,6 +546,8 @@ static struct samsung_gate_clock gate_clks[] __initdata = {
GATE_SCLK_FSYS, 9, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_EBI, "sclk_ebi", "div_ebi",
GATE_SCLK_FSYS, 6, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_MMC2, "sclk_mmc2", "div_mmc2_pre",
+ GATE_SCLK_FSYS, 2, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_MMC1, "sclk_mmc1", "div_mmc1_pre",
GATE_SCLK_FSYS, 1, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_MMC0, "sclk_mmc0", "div_mmc0_pre",
@@ -635,6 +643,7 @@ static struct samsung_gate_clock gate_clks[] __initdata = {
GATE(CLK_USBOTG, "usbotg", "div_aclk_200", GATE_IP_FSYS, 13, 0, 0),
GATE(CLK_USBHOST, "usbhost", "div_aclk_200", GATE_IP_FSYS, 12, 0, 0),
GATE(CLK_SROMC, "sromc", "div_aclk_200", GATE_IP_FSYS, 11, 0, 0),
+ GATE(CLK_SDMMC2, "sdmmc2", "div_aclk_200", GATE_IP_FSYS, 7, 0, 0),
GATE(CLK_SDMMC1, "sdmmc1", "div_aclk_200", GATE_IP_FSYS, 6, 0, 0),
GATE(CLK_SDMMC0, "sdmmc0", "div_aclk_200", GATE_IP_FSYS, 5, 0, 0),
GATE(CLK_PDMA1, "pdma1", "div_aclk_200", GATE_IP_FSYS, 1, 0, 0),
diff --git a/include/dt-bindings/clock/exynos3250.h b/include/dt-bindings/clock/exynos3250.h
index ddb874130d86..c796ff02ceeb 100644
--- a/include/dt-bindings/clock/exynos3250.h
+++ b/include/dt-bindings/clock/exynos3250.h
@@ -80,6 +80,7 @@
#define CLK_MOUT_APLL 59
#define CLK_MOUT_ACLK_266_SUB 60
#define CLK_MOUT_UART2 61
+#define CLK_MOUT_MMC2 62
/* Dividers */
#define CLK_DIV_GPL 64
@@ -129,6 +130,8 @@
#define CLK_DIV_HPM 108
#define CLK_DIV_COPY 109
#define CLK_DIV_UART2 110
+#define CLK_DIV_MMC2_PRE 111
+#define CLK_DIV_MMC2 112
/* Gates */
#define CLK_ASYNC_G3D 128
@@ -226,6 +229,7 @@
#define CLK_BLOCK_CAM 220
#define CLK_SMIES 221
#define CLK_UART2 222
+#define CLK_SDMMC2 223
/* Special clocks */
#define CLK_SCLK_JPEG 224
@@ -253,12 +257,13 @@
#define CLK_SCLK_UART1 246
#define CLK_SCLK_UART0 247
#define CLK_SCLK_UART2 248
+#define CLK_SCLK_MMC2 249
/*
* Total number of clocks of main CMU.
* NOTE: Must be equal to last clock ID increased by one.
*/
-#define CLK_NR_CLKS 249
+#define CLK_NR_CLKS 250
/*
* CMU DMC
--
1.9.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v2 3/7] ARM: dts: Add UART2 dt node for Exynos3250 SoC
[not found] ` <1458007695-3627-1-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
@ 2016-03-15 2:08 ` Chanwoo Choi
2016-03-15 2:08 ` [PATCH v2 4/7] ARM: dts: Add MSHC2 " Chanwoo Choi
2016-03-15 2:08 ` [PATCH v2 7/7] ARM: dts: Add initial gpio setting of MMC2 device for exynos3250-monk Chanwoo Choi
2 siblings, 0 replies; 17+ messages in thread
From: Chanwoo Choi @ 2016-03-15 2:08 UTC (permalink / raw)
To: k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ, kgene-DgEjT+Ai2ygdnm+yROfE0A,
s.nawrocki-Sze3O3UU22JBDgjK7y7TUQ,
tomasz.figa-Re5JQEeQqe8AvxtiuMwx3w
Cc: jh80.chung-Sze3O3UU22JBDgjK7y7TUQ,
andi.shyti-Sze3O3UU22JBDgjK7y7TUQ,
inki.dae-Sze3O3UU22JBDgjK7y7TUQ,
sw0312.kim-Sze3O3UU22JBDgjK7y7TUQ,
pankaj.dubey-Sze3O3UU22JBDgjK7y7TUQ,
cw00.choi-Sze3O3UU22JBDgjK7y7TUQ,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA
From: Pankaj Dubey <pankaj.dubey-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
This patch add the uart2 devicetree node for Exynos3250 SoC.
Cc: Kukjin Kim <kgene-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Krzysztof Kozlowski <k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Signed-off-by: Pankaj Dubey <pankaj.dubey-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Signed-off-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 7 +++++++
arch/arm/boot/dts/exynos3250.dtsi | 12 ++++++++++++
2 files changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
index ecf79386e891..54c587f27265 100644
--- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
@@ -158,6 +158,13 @@
samsung,pin-drv = <0>;
};
+ uart2_data: uart2-data {
+ samsung,pins = "gpa1-0", "gpa1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
i2c3_bus: i2c3-bus {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <3>;
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 18e3deffbf48..076677384d20 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -42,6 +42,7 @@
i2c7 = &i2c_7;
serial0 = &serial_0;
serial1 = &serial_1;
+ serial2 = &serial_2;
};
cpus {
@@ -465,6 +466,17 @@
status = "disabled";
};
+ serial_2: serial@13820000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13820000 0x100>;
+ interrupts = <0 111 0>;
+ clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>;
+ clock-names = "uart", "clk_uart_baud0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_data>;
+ status = "disabled";
+ };
+
i2c_0: i2c@13860000 {
#address-cells = <1>;
#size-cells = <0>;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v2 4/7] ARM: dts: Add MSHC2 dt node for Exynos3250 SoC
[not found] ` <1458007695-3627-1-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-03-15 2:08 ` [PATCH v2 3/7] ARM: dts: Add UART2 dt node for Exynos3250 SoC Chanwoo Choi
@ 2016-03-15 2:08 ` Chanwoo Choi
2016-03-15 2:08 ` [PATCH v2 7/7] ARM: dts: Add initial gpio setting of MMC2 device for exynos3250-monk Chanwoo Choi
2 siblings, 0 replies; 17+ messages in thread
From: Chanwoo Choi @ 2016-03-15 2:08 UTC (permalink / raw)
To: k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ, kgene-DgEjT+Ai2ygdnm+yROfE0A,
s.nawrocki-Sze3O3UU22JBDgjK7y7TUQ,
tomasz.figa-Re5JQEeQqe8AvxtiuMwx3w
Cc: jh80.chung-Sze3O3UU22JBDgjK7y7TUQ,
andi.shyti-Sze3O3UU22JBDgjK7y7TUQ,
inki.dae-Sze3O3UU22JBDgjK7y7TUQ,
sw0312.kim-Sze3O3UU22JBDgjK7y7TUQ,
pankaj.dubey-Sze3O3UU22JBDgjK7y7TUQ,
cw00.choi-Sze3O3UU22JBDgjK7y7TUQ,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA
This patch adds the MSHC2 (Mobile Storage Host Controller) Device Tree node for
Exynos3250 SoC.
Cc: Kukjin Kim <kgene-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Krzysztof Kozlowski <k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Signed-off-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 35 +++++++++++++++++++++++++++++++
arch/arm/boot/dts/exynos3250.dtsi | 13 ++++++++++++
2 files changed, 48 insertions(+)
diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
index 54c587f27265..40ea7de44933 100644
--- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
@@ -490,6 +490,41 @@
samsung,pin-drv = <3>;
};
+ sd2_clk: sd2-clk {
+ samsung,pins = "gpk2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_cmd: sd2-cmd {
+ samsung,pins = "gpk2-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_cd: sd2-cd {
+ samsung,pins = "gpk2-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus1: sd2-bus-width1 {
+ samsung,pins = "gpk2-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus4: sd2-bus-width4 {
+ samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
cam_port_b_io: cam-port-b-io {
samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 076677384d20..2fead5730879 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -30,6 +30,7 @@
pinctrl1 = &pinctrl_1;
mshc0 = &mshc_0;
mshc1 = &mshc_1;
+ mshc2 = &mshc_2;
spi0 = &spi_0;
spi1 = &spi_1;
i2c0 = &i2c_0;
@@ -371,6 +372,18 @@
status = "disabled";
};
+ mshc_2: mshc@12530000 {
+ compatible = "samsung,exynos5250-dw-mshc";
+ reg = <0x12530000 0x1000>;
+ interrupts = <0 144 0>;
+ clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
exynos_usbphy: exynos-usbphy@125B0000 {
compatible = "samsung,exynos3250-usb2-phy";
reg = <0x125B0000 0x100>;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v2 5/7] ARM: dts: Add exynos3250-artik5 dtsi file for ARTIK5 module
2016-03-15 2:08 [PATCH v2 0/7] ARM: dts: Add new Exynos3250-based ARTIK5 module dtsi file Chanwoo Choi
` (2 preceding siblings ...)
[not found] ` <1458007695-3627-1-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
@ 2016-03-15 2:08 ` Chanwoo Choi
[not found] ` <1458007695-3627-6-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-03-15 2:08 ` [PATCH v2 6/7] ARM: dts: Add MSHC2 dt node for SD card for exynos3250-artik5-eval board Chanwoo Choi
2016-03-15 2:35 ` [PATCH v2 0/7] ARM: dts: Add new Exynos3250-based ARTIK5 module dtsi file Krzysztof Kozlowski
5 siblings, 1 reply; 17+ messages in thread
From: Chanwoo Choi @ 2016-03-15 2:08 UTC (permalink / raw)
To: k.kozlowski, kgene, s.nawrocki, tomasz.figa
Cc: jh80.chung, andi.shyti, inki.dae, sw0312.kim, pankaj.dubey,
cw00.choi, linux-samsung-soc, linux-arm-kernel, linux-kernel,
devicetree
This patch adds the support for Device Tree source for Samsung ARTIK5 module[1]
based on Exynos3250 SoC. The ARTIK5 module includes the follwoing devices:
- Application Processor (Samsung Exynos3250)
- WiFi/BT Combo chip (Broadcom4354)
- PMIC (Samsung S2MPS14)
- eMMC (4GB)
- DRAM LPDDR3 (512MB)
- Connectors pin (60 Pins x 3 set)
Also, this patch adds the ARTIK5 evaluation board[2] dts file which includes
the ARTIK5 module[1] and have the devices such as sound codec, sd card port,
ethernet port, uart port and so on.
[1] https://www.artik.io/hardware/artik-5
[2] http://www.digikey.com/product-search/en?FV=ffecca14
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
---
.../bindings/arm/samsung/samsung-boards.txt | 2 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/exynos3250-artik5-eval.dts | 26 ++
arch/arm/boot/dts/exynos3250-artik5.dtsi | 334 +++++++++++++++++++++
4 files changed, 363 insertions(+)
create mode 100644 arch/arm/boot/dts/exynos3250-artik5-eval.dts
create mode 100644 arch/arm/boot/dts/exynos3250-artik5.dtsi
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
index 12129c011c8f..f5deace2b380 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
@@ -2,6 +2,8 @@
Required root node properties:
- compatible = should be one or more of the following.
+ - "samsung,artik5" - for Exynos3250-based Samsung ARTIK5 module.
+ - "samsung,artik5-eval" - for Exynos3250-based Samsung ARTIK5 eval board.
- "samsung,monk" - for Exynos3250-based Samsung Simband board.
- "samsung,rinato" - for Exynos3250-based Samsung Gear2 board.
- "samsung,smdkv310" - for Exynos4210-based Samsung SMDKV310 eval board.
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a4a6d70e8b26..85cd586ea3d2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -108,6 +108,7 @@ dtb-$(CONFIG_ARCH_DIGICOLOR) += \
dtb-$(CONFIG_ARCH_EFM32) += \
efm32gg-dk3750.dtb
dtb-$(CONFIG_ARCH_EXYNOS3) += \
+ exynos3250-artik5-eval.dtb \
exynos3250-monk.dtb \
exynos3250-rinato.dtb
dtb-$(CONFIG_ARCH_EXYNOS4) += \
diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
new file mode 100644
index 000000000000..b476154590a5
--- /dev/null
+++ b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
@@ -0,0 +1,26 @@
+/*
+ * Samsung's Exynos3250 based ARTIK5 evaluation board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Device tree source file for Samsung's ARTIK5 evaluation board
+ * which is based on Samsung Exynos3250 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos3250-artik5.dtsi"
+
+/ {
+ model = "Samsung ARTIK5 evaluation board";
+ compatible = "samsung,artik5-eval", "samsung,artik5",
+ "samsung,exynos3250", "samsung,exynos3";
+};
+
+&serial_2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
new file mode 100644
index 000000000000..206625ba8cf2
--- /dev/null
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -0,0 +1,334 @@
+/*
+ * Samsung's Exynos3250 based ARTIK5 module device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Device tree source file for Samsung's ARTIK5 module which is based on
+ * Samsung Exynos3250 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "exynos3250.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "samsung,artik5", "samsung,exynos3250", "samsung,exynos3";
+
+ chosen {
+ stdout-path = &serial_2;
+ };
+
+ memory {
+ reg = <0x40000000 0x1ff00000>;
+ };
+
+ firmware@0205F000 {
+ compatible = "samsung,secure-firmware";
+ reg = <0x0205f000 0x1000>;
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ cooling-maps {
+ map0 {
+ /* Corresponds to 500MHz */
+ cooling-device = <&cpu0 5 5>;
+ };
+ map1 {
+ /* Corresponds to 200MHz */
+ cooling-device = <&cpu0 8 8>;
+ };
+ };
+ };
+ };
+};
+
+&adc {
+ vdd-supply = <&ldo7_reg>;
+ assigned-clocks = <&cmu CLK_SCLK_TSADC>;
+ assigned-clock-rates = <6000000>;
+};
+
+&cpu0 {
+ cpu0-supply = <&buck2_reg>;
+};
+
+&i2c_0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <100000>;
+ status = "okay";
+
+ s2mps14_pmic@66 {
+ compatible = "samsung,s2mps14-pmic";
+ interrupt-parent = <&gpx3>;
+ interrupts = <5 IRQ_TYPE_NONE>;
+ reg = <0x66>;
+
+ s2mps14_osc: clocks {
+ compatible = "samsung,s2mps14-clk";
+ #clock-cells = <1>;
+ clock-output-names = "s2mps14_ap", "unused",
+ "s2mps14_bt";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ /* VDD_ALIVE15x */
+ regulator-name = "VLDO1_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ /* VDDQM176 ~ VDDQM185 */
+ regulator-name = "VLDO2_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ /*
+ * VDD1_E106 ~ VDD1_E111
+ * DVDD_RTC_AP, DVDD_MMC2_AP
+ */
+ regulator-name = "VLDO3_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ /* AVDD_PLL1120 ~ AVDD_PLL11201 */
+ regulator-name = "VLDO4_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: LDO5 {
+ /* VDDI_PLL_ISO141 ~ VDDI_PLL_ISO142 */
+ regulator-name = "VLDO5_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ /* VDD_USB, VDD10_HSIC */
+ regulator-name = "VLDO6_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ /*
+ * VDD18P, AVDD18_TS, AVDD18_HSIC, AVDD_PLL2,
+ * AVDD_ADC, AVDD_ABB_0, M4S_VDD18
+ */
+ regulator-name = "VLDO7_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ /* AVDD33_UOTG */
+ regulator-name = "VLDO8_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo9_reg: LDO9 {
+ /* VDDQ_E86 ~ VDDQ_E105*/
+ regulator-name = "VLDO9_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VLDO10_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo11_reg: LDO11 {
+ /* VDD74 ~ VDD75 */
+ regulator-name = "VLDO11_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ ldo12_reg: LDO12 {
+ /* VDD72 ~ VDD73 */
+ regulator-name = "VLDO12_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VLDO13_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VLDO14_2.7V";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VLDO_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VLDO16_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "VLDO17_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo18_reg: LDO18 {
+ /* DVDD_MMC2_AP */
+ regulator-name = "VLDO18_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "VLDO19_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "VLDO20_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "VLDO21_1.25V";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "VLDO22_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo23_reg: LDO23 {
+ /* Xi2c3_SDA/SCL, Xi2c7_SDA/SCL, WLAN_SDIO */
+ regulator-name = "VLDO23_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "VLDO24_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "VLDO25_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ buck1_reg: BUCK1 {
+ /* VDD_MIF */
+ regulator-name = "VBUCK1_1.0V";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ buck2_reg: BUCK2 {
+ /* VDD_CPU */
+ regulator-name = "VBUCK2_1.2V";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ buck3_reg: BUCK3 {
+ /* VDD_G3D */
+ regulator-name = "VBUCK3_1.0V";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "VBUCK4_1.95V";
+ regulator-min-microvolt = <1950000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-always-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VBUCK5_1.35V";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&mshc_0 {
+ num-slots = <1>;
+ non-removable;
+ cap-mmc-highspeed;
+ card-detect-delay = <200>;
+ vmmc-supply = <&ldo12_reg>;
+ clock-frequency = <100000000>;
+ clock-freq-min-max = <400000 100000000>;
+ samsung,dw-mshc-ciu-div = <1>;
+ samsung,dw-mshc-sdr-timing = <0 1>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&tmu {
+ status = "okay";
+};
+
+&rtc {
+ clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
+ status = "okay";
+};
+
+&xusbxti {
+ clock-frequency = <24000000>;
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v2 6/7] ARM: dts: Add MSHC2 dt node for SD card for exynos3250-artik5-eval board
2016-03-15 2:08 [PATCH v2 0/7] ARM: dts: Add new Exynos3250-based ARTIK5 module dtsi file Chanwoo Choi
` (3 preceding siblings ...)
2016-03-15 2:08 ` [PATCH v2 5/7] ARM: dts: Add exynos3250-artik5 dtsi file for ARTIK5 module Chanwoo Choi
@ 2016-03-15 2:08 ` Chanwoo Choi
2016-03-15 2:36 ` Krzysztof Kozlowski
2016-03-15 2:35 ` [PATCH v2 0/7] ARM: dts: Add new Exynos3250-based ARTIK5 module dtsi file Krzysztof Kozlowski
5 siblings, 1 reply; 17+ messages in thread
From: Chanwoo Choi @ 2016-03-15 2:08 UTC (permalink / raw)
To: k.kozlowski, kgene, s.nawrocki, tomasz.figa
Cc: jh80.chung, andi.shyti, inki.dae, sw0312.kim, pankaj.dubey,
cw00.choi, linux-samsung-soc, linux-arm-kernel, linux-kernel,
devicetree
From: Jaehoon Chung <jh80.chung@samsung.com>
This patch adds MSHC (Mobile Storage Host Controller) dt node for
Exynos3250 SoC. MSHC is an interface between the system and the SD card
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
arch/arm/boot/dts/exynos3250-artik5-eval.dts | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
index b476154590a5..be4d6aa379f3 100644
--- a/arch/arm/boot/dts/exynos3250-artik5-eval.dts
+++ b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
@@ -21,6 +21,23 @@
"samsung,exynos3250", "samsung,exynos3";
};
+&mshc_2 {
+ num-slots = <1>;
+ cap-sd-highspeed;
+ disable-wp;
+ vqmmc-supply = <&ldo3_reg>;
+ card-detect-delay = <200>;
+ clock-frequency = <100000000>;
+ clock-freq-min-max = <400000 100000000>;
+ samsung,dw-mshc-ciu-div = <1>;
+ samsung,dw-mshc-sdr-timing = <0 1>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_cmd &sd2_clk &sd2_cd &sd2_bus1 &sd2_bus4>;
+ bus-width = <4>;
+ status = "okay";
+};
+
&serial_2 {
status = "okay";
};
--
1.9.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v2 7/7] ARM: dts: Add initial gpio setting of MMC2 device for exynos3250-monk
[not found] ` <1458007695-3627-1-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-03-15 2:08 ` [PATCH v2 3/7] ARM: dts: Add UART2 dt node for Exynos3250 SoC Chanwoo Choi
2016-03-15 2:08 ` [PATCH v2 4/7] ARM: dts: Add MSHC2 " Chanwoo Choi
@ 2016-03-15 2:08 ` Chanwoo Choi
2016-03-15 2:38 ` Krzysztof Kozlowski
2016-03-15 4:18 ` kbuild test robot
2 siblings, 2 replies; 17+ messages in thread
From: Chanwoo Choi @ 2016-03-15 2:08 UTC (permalink / raw)
To: k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ, kgene-DgEjT+Ai2ygdnm+yROfE0A,
s.nawrocki-Sze3O3UU22JBDgjK7y7TUQ,
tomasz.figa-Re5JQEeQqe8AvxtiuMwx3w
Cc: jh80.chung-Sze3O3UU22JBDgjK7y7TUQ,
andi.shyti-Sze3O3UU22JBDgjK7y7TUQ,
inki.dae-Sze3O3UU22JBDgjK7y7TUQ,
sw0312.kim-Sze3O3UU22JBDgjK7y7TUQ,
pankaj.dubey-Sze3O3UU22JBDgjK7y7TUQ,
cw00.choi-Sze3O3UU22JBDgjK7y7TUQ,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA
This patch adds initial pin configuration of MMC2 device on exynos3250-monk
board because the MMC2 gpio pin (gpk2[0-6]) are NC (not connected) state.
Suggested-by: Krzysztof Kozlowski <k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Signed-off-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
arch/arm/boot/dts/exynos3250-monk.dts | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index 443a35085846..dab965f35352 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -558,7 +558,17 @@
&pinctrl_1 {
pinctrl-names = "default";
- pinctrl-0 = <&sleep1>;
+ pinctrl-0 = <&initial1 &sleep1>;
+
+ initial1: initial-state {
+ PIN_IN(gpk2-0, DOWN, LV1);
+ PIN_IN(gpk2-1, DOWN, LV1);
+ PIN_IN(gpk2-2, DOWN, LV1);
+ PIN_IN(gpk2-3, DOWN, LV1);
+ PIN_IN(gpk2-4, DOWN, LV1);
+ PIN_IN(gpk2-5, DOWN, LV1);
+ PIN_IN(gpk2-6, DOWN, LV1);
+ };
sleep1: sleep-state {
PIN_SLP(gpe0-0, PREV, NONE);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH v2 5/7] ARM: dts: Add exynos3250-artik5 dtsi file for ARTIK5 module
[not found] ` <1458007695-3627-6-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
@ 2016-03-15 2:33 ` Krzysztof Kozlowski
2016-03-15 2:42 ` Chanwoo Choi
0 siblings, 1 reply; 17+ messages in thread
From: Krzysztof Kozlowski @ 2016-03-15 2:33 UTC (permalink / raw)
To: Chanwoo Choi, kgene-DgEjT+Ai2ygdnm+yROfE0A,
s.nawrocki-Sze3O3UU22JBDgjK7y7TUQ,
tomasz.figa-Re5JQEeQqe8AvxtiuMwx3w
Cc: jh80.chung-Sze3O3UU22JBDgjK7y7TUQ,
andi.shyti-Sze3O3UU22JBDgjK7y7TUQ,
inki.dae-Sze3O3UU22JBDgjK7y7TUQ,
sw0312.kim-Sze3O3UU22JBDgjK7y7TUQ,
pankaj.dubey-Sze3O3UU22JBDgjK7y7TUQ,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA
On 15.03.2016 11:08, Chanwoo Choi wrote:
> This patch adds the support for Device Tree source for Samsung ARTIK5 module[1]
> based on Exynos3250 SoC. The ARTIK5 module includes the follwoing devices:
> - Application Processor (Samsung Exynos3250)
> - WiFi/BT Combo chip (Broadcom4354)
> - PMIC (Samsung S2MPS14)
> - eMMC (4GB)
> - DRAM LPDDR3 (512MB)
> - Connectors pin (60 Pins x 3 set)
>
> Also, this patch adds the ARTIK5 evaluation board[2] dts file which includes
> the ARTIK5 module[1] and have the devices such as sound codec, sd card port,
> ethernet port, uart port and so on.
>
> [1] https://www.artik.io/hardware/artik-5
> [2] http://www.digikey.com/product-search/en?FV=ffecca14
>
> Signed-off-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Jaehoon Chung <jh80.chung-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Andi Shyti <andi.shyti-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> ---
> .../bindings/arm/samsung/samsung-boards.txt | 2 +
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/exynos3250-artik5-eval.dts | 26 ++
> arch/arm/boot/dts/exynos3250-artik5.dtsi | 334 +++++++++++++++++++++
> 4 files changed, 363 insertions(+)
> create mode 100644 arch/arm/boot/dts/exynos3250-artik5-eval.dts
> create mode 100644 arch/arm/boot/dts/exynos3250-artik5.dtsi
>
> diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> index 12129c011c8f..f5deace2b380 100644
> --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> @@ -2,6 +2,8 @@
>
> Required root node properties:
> - compatible = should be one or more of the following.
> + - "samsung,artik5" - for Exynos3250-based Samsung ARTIK5 module.
> + - "samsung,artik5-eval" - for Exynos3250-based Samsung ARTIK5 eval board.
> - "samsung,monk" - for Exynos3250-based Samsung Simband board.
> - "samsung,rinato" - for Exynos3250-based Samsung Gear2 board.
> - "samsung,smdkv310" - for Exynos4210-based Samsung SMDKV310 eval board.
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index a4a6d70e8b26..85cd586ea3d2 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -108,6 +108,7 @@ dtb-$(CONFIG_ARCH_DIGICOLOR) += \
> dtb-$(CONFIG_ARCH_EFM32) += \
> efm32gg-dk3750.dtb
> dtb-$(CONFIG_ARCH_EXYNOS3) += \
> + exynos3250-artik5-eval.dtb \
> exynos3250-monk.dtb \
> exynos3250-rinato.dtb
> dtb-$(CONFIG_ARCH_EXYNOS4) += \
> diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
> new file mode 100644
> index 000000000000..b476154590a5
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
> @@ -0,0 +1,26 @@
> +/*
> + * Samsung's Exynos3250 based ARTIK5 evaluation board device tree source
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * Device tree source file for Samsung's ARTIK5 evaluation board
> + * which is based on Samsung Exynos3250 SoC.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/dts-v1/;
> +#include "exynos3250-artik5.dtsi"
> +
> +/ {
> + model = "Samsung ARTIK5 evaluation board";
> + compatible = "samsung,artik5-eval", "samsung,artik5",
> + "samsung,exynos3250", "samsung,exynos3";
> +};
> +
> +&serial_2 {
> + status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
> new file mode 100644
> index 000000000000..206625ba8cf2
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
> @@ -0,0 +1,334 @@
> +/*
> + * Samsung's Exynos3250 based ARTIK5 module device tree source
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * Device tree source file for Samsung's ARTIK5 module which is based on
> + * Samsung Exynos3250 SoC.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include "exynos3250.dtsi"
> +#include <dt-bindings/clock/samsung,s2mps11.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/gpio/gpio.h>
Alphabetical order for dt-bindings includes: interrupt at the end.
> +
> +/ {
> + compatible = "samsung,artik5", "samsung,exynos3250", "samsung,exynos3";
> +
> + chosen {
> + stdout-path = &serial_2;
> + };
> +
> + memory {
> + reg = <0x40000000 0x1ff00000>;
> + };
> +
> + firmware@0205F000 {
I meant same case for every hex, also in device node.
> + compatible = "samsung,secure-firmware";
> + reg = <0x0205f000 0x1000>;
> + };
> +
> + thermal-zones {
> + cpu_thermal: cpu-thermal {
> + cooling-maps {
> + map0 {
> + /* Corresponds to 500MHz */
> + cooling-device = <&cpu0 5 5>;
> + };
> + map1 {
> + /* Corresponds to 200MHz */
> + cooling-device = <&cpu0 8 8>;
> + };
> + };
> + };
> + };
> +};
> +
> +&adc {
> + vdd-supply = <&ldo7_reg>;
> + assigned-clocks = <&cmu CLK_SCLK_TSADC>;
> + assigned-clock-rates = <6000000>;
> +};
> +
> +&cpu0 {
> + cpu0-supply = <&buck2_reg>;
> +};
> +
> +&i2c_0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-slave-addr = <0x10>;
> + samsung,i2c-max-bus-freq = <100000>;
> + status = "okay";
> +
> + s2mps14_pmic@66 {
> + compatible = "samsung,s2mps14-pmic";
> + interrupt-parent = <&gpx3>;
> + interrupts = <5 IRQ_TYPE_NONE>;
> + reg = <0x66>;
> +
> + s2mps14_osc: clocks {
> + compatible = "samsung,s2mps14-clk";
> + #clock-cells = <1>;
> + clock-output-names = "s2mps14_ap", "unused",
> + "s2mps14_bt";
> + };
> +
> + regulators {
> + ldo1_reg: LDO1 {
> + /* VDD_ALIVE15x */
> + regulator-name = "VLDO1_1.0V";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + };
> +
> + ldo2_reg: LDO2 {
> + /* VDDQM176 ~ VDDQM185 */
> + regulator-name = "VLDO2_1.2V";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + };
> +
> + ldo3_reg: LDO3 {
> + /*
> + * VDD1_E106 ~ VDD1_E111
> + * DVDD_RTC_AP, DVDD_MMC2_AP
> + */
> + regulator-name = "VLDO3_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo4_reg: LDO4 {
> + /* AVDD_PLL1120 ~ AVDD_PLL11201 */
> + regulator-name = "VLDO4_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo5_reg: LDO5 {
> + /* VDDI_PLL_ISO141 ~ VDDI_PLL_ISO142 */
> + regulator-name = "VLDO5_1.0V";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + };
> +
> + ldo6_reg: LDO6 {
> + /* VDD_USB, VDD10_HSIC */
> + regulator-name = "VLDO6_1.0V";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + };
> +
> + ldo7_reg: LDO7 {
> + /*
> + * VDD18P, AVDD18_TS, AVDD18_HSIC, AVDD_PLL2,
> + * AVDD_ADC, AVDD_ABB_0, M4S_VDD18
> + */
> + regulator-name = "VLDO7_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo8_reg: LDO8 {
> + /* AVDD33_UOTG */
> + regulator-name = "VLDO8_3.0V";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-always-on;
> + };
> +
> + ldo9_reg: LDO9 {
> + /* VDDQ_E86 ~ VDDQ_E105*/
> + regulator-name = "VLDO9_1.2V";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + };
> +
> + ldo10_reg: LDO10 {
> + regulator-name = "VLDO10_1.0V";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + ldo11_reg: LDO11 {
> + /* VDD74 ~ VDD75 */
> + regulator-name = "VLDO11_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
> + };
> +
> + ldo12_reg: LDO12 {
> + /* VDD72 ~ VDD73 */
> + regulator-name = "VLDO12_2.8V";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
> + };
> +
> + ldo13_reg: LDO13 {
> + regulator-name = "VLDO13_2.8V";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo14_reg: LDO14 {
> + regulator-name = "VLDO14_2.7V";
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <2700000>;
> + };
> +
> + ldo15_reg: LDO15 {
> + regulator-name = "VLDO_3.3V";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + ldo16_reg: LDO16 {
> + regulator-name = "VLDO16_3.3V";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + ldo17_reg: LDO17 {
> + regulator-name = "VLDO17_3.0V";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + ldo18_reg: LDO18 {
> + /* DVDD_MMC2_AP */
> + regulator-name = "VLDO18_2.8V";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo19_reg: LDO19 {
> + regulator-name = "VLDO19_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo20_reg: LDO20 {
> + regulator-name = "VLDO20_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo21_reg: LDO21 {
> + regulator-name = "VLDO21_1.25V";
> + regulator-min-microvolt = <1250000>;
> + regulator-max-microvolt = <1250000>;
> + };
> +
> + ldo22_reg: LDO22 {
> + regulator-name = "VLDO22_1.2V";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + ldo23_reg: LDO23 {
> + /* Xi2c3_SDA/SCL, Xi2c7_SDA/SCL, WLAN_SDIO */
> + regulator-name = "VLDO23_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo24_reg: LDO24 {
> + regulator-name = "VLDO24_3.0V";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + ldo25_reg: LDO25 {
> + regulator-name = "VLDO25_3.0V";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + buck1_reg: BUCK1 {
> + /* VDD_MIF */
> + regulator-name = "VBUCK1_1.0V";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + };
> +
> + buck2_reg: BUCK2 {
> + /* VDD_CPU */
> + regulator-name = "VBUCK2_1.2V";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + };
> +
> + buck3_reg: BUCK3 {
> + /* VDD_G3D */
> + regulator-name = "VBUCK3_1.0V";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + };
> +
> + buck4_reg: BUCK4 {
> + regulator-name = "VBUCK4_1.95V";
> + regulator-min-microvolt = <1950000>;
> + regulator-max-microvolt = <1950000>;
> + regulator-always-on;
> + };
> +
> + buck5_reg: BUCK5 {
> + regulator-name = "VBUCK5_1.35V";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> +&mshc_0 {
> + num-slots = <1>;
> + non-removable;
> + cap-mmc-highspeed;
> + card-detect-delay = <200>;
> + vmmc-supply = <&ldo12_reg>;
> + clock-frequency = <100000000>;
> + clock-freq-min-max = <400000 100000000>;
> + samsung,dw-mshc-ciu-div = <1>;
> + samsung,dw-mshc-sdr-timing = <0 1>;
> + samsung,dw-mshc-ddr-timing = <1 2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
> + bus-width = <8>;
> + status = "okay";
> +};
> +
> +&tmu {
> + status = "okay";
> +};
> +
> +&rtc {
> + clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
> + clock-names = "rtc", "rtc_src";
> + status = "okay";
> +};
Alphabetical order please, so rtc before tmu.
These are minor nits, so no need to resend. I can fix them when applying
(but if resend happens then please fix them).
Reviewed-by: Krzysztof Kozlowski <k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Best regards,
Krzysztof
> +
> +&xusbxti {
> + clock-frequency = <24000000>;
> +};
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v2 0/7] ARM: dts: Add new Exynos3250-based ARTIK5 module dtsi file
2016-03-15 2:08 [PATCH v2 0/7] ARM: dts: Add new Exynos3250-based ARTIK5 module dtsi file Chanwoo Choi
` (4 preceding siblings ...)
2016-03-15 2:08 ` [PATCH v2 6/7] ARM: dts: Add MSHC2 dt node for SD card for exynos3250-artik5-eval board Chanwoo Choi
@ 2016-03-15 2:35 ` Krzysztof Kozlowski
2016-03-15 2:39 ` Chanwoo Choi
5 siblings, 1 reply; 17+ messages in thread
From: Krzysztof Kozlowski @ 2016-03-15 2:35 UTC (permalink / raw)
To: Chanwoo Choi, kgene, s.nawrocki, tomasz.figa
Cc: jh80.chung, andi.shyti, inki.dae, sw0312.kim, pankaj.dubey,
linux-samsung-soc, linux-arm-kernel, linux-kernel, devicetree
On 15.03.2016 11:08, Chanwoo Choi wrote:
> This patchset add the support for Device Tree source for Samsung ARTIK5 module[1]
> based on Exynos3250 SoC and development board[2]. The ARTIK5 module includes
> the follwoing devices:
> - Application Processor (Samsung Exynos3250)
> - WiFi/BT Combo chip
> - PMIC (Samsung S2MPS14)
> - eMMC (4GB)
> - DRAM LPDDR3 (512MB)
> - Connectors pin (60 Pins x 3 set)
>
> Also, this patchset add the ARTIK5 development board[2] dts file which includes
> the ARTIK5 module[1] and have the devices such as sound codec, sd card port,
> ethernet port, uart port and so on.
>
> [1] https://www.artik.io/hardware/artik-5
> [2] http://www.digikey.com/product-detail/en/SIP-KITNXB001/1510-1316-ND/5825102
I guess the rest of patches depend on new clocks, right?
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v2 6/7] ARM: dts: Add MSHC2 dt node for SD card for exynos3250-artik5-eval board
2016-03-15 2:08 ` [PATCH v2 6/7] ARM: dts: Add MSHC2 dt node for SD card for exynos3250-artik5-eval board Chanwoo Choi
@ 2016-03-15 2:36 ` Krzysztof Kozlowski
0 siblings, 0 replies; 17+ messages in thread
From: Krzysztof Kozlowski @ 2016-03-15 2:36 UTC (permalink / raw)
To: Chanwoo Choi, kgene, s.nawrocki, tomasz.figa
Cc: jh80.chung, andi.shyti, inki.dae, sw0312.kim, pankaj.dubey,
linux-samsung-soc, linux-arm-kernel, linux-kernel, devicetree
On 15.03.2016 11:08, Chanwoo Choi wrote:
> From: Jaehoon Chung <jh80.chung@samsung.com>
>
> This patch adds MSHC (Mobile Storage Host Controller) dt node for
> Exynos3250 SoC. MSHC is an interface between the system and the SD card
>
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
> arch/arm/boot/dts/exynos3250-artik5-eval.dts | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v2 7/7] ARM: dts: Add initial gpio setting of MMC2 device for exynos3250-monk
2016-03-15 2:08 ` [PATCH v2 7/7] ARM: dts: Add initial gpio setting of MMC2 device for exynos3250-monk Chanwoo Choi
@ 2016-03-15 2:38 ` Krzysztof Kozlowski
2016-03-15 4:18 ` kbuild test robot
1 sibling, 0 replies; 17+ messages in thread
From: Krzysztof Kozlowski @ 2016-03-15 2:38 UTC (permalink / raw)
To: Chanwoo Choi, kgene, s.nawrocki, tomasz.figa
Cc: jh80.chung, andi.shyti, inki.dae, sw0312.kim, pankaj.dubey,
linux-samsung-soc, linux-arm-kernel, linux-kernel, devicetree
On 15.03.2016 11:08, Chanwoo Choi wrote:
> This patch adds initial pin configuration of MMC2 device on exynos3250-monk
> board because the MMC2 gpio pin (gpk2[0-6]) are NC (not connected) state.
>
> Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
> arch/arm/boot/dts/exynos3250-monk.dts | 12 +++++++++++-
> 1 file changed, 11 insertions(+), 1 deletion(-)
>
The patch should go in before setting these pins to MMC2 (so before
patch 4/7) so there won't be any change in behaviour.
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v2 0/7] ARM: dts: Add new Exynos3250-based ARTIK5 module dtsi file
2016-03-15 2:35 ` [PATCH v2 0/7] ARM: dts: Add new Exynos3250-based ARTIK5 module dtsi file Krzysztof Kozlowski
@ 2016-03-15 2:39 ` Chanwoo Choi
2016-03-15 2:44 ` Krzysztof Kozlowski
0 siblings, 1 reply; 17+ messages in thread
From: Chanwoo Choi @ 2016-03-15 2:39 UTC (permalink / raw)
To: Krzysztof Kozlowski, kgene, s.nawrocki, tomasz.figa
Cc: jh80.chung, andi.shyti, inki.dae, sw0312.kim, pankaj.dubey,
linux-samsung-soc, linux-arm-kernel, linux-kernel, devicetree
On 2016년 03월 15일 11:35, Krzysztof Kozlowski wrote:
> On 15.03.2016 11:08, Chanwoo Choi wrote:
>> This patchset add the support for Device Tree source for Samsung ARTIK5 module[1]
>> based on Exynos3250 SoC and development board[2]. The ARTIK5 module includes
>> the follwoing devices:
>> - Application Processor (Samsung Exynos3250)
>> - WiFi/BT Combo chip
>> - PMIC (Samsung S2MPS14)
>> - eMMC (4GB)
>> - DRAM LPDDR3 (512MB)
>> - Connectors pin (60 Pins x 3 set)
>>
>> Also, this patchset add the ARTIK5 development board[2] dts file which includes
>> the ARTIK5 module[1] and have the devices such as sound codec, sd card port,
>> ethernet port, uart port and so on.
>>
>> [1] https://www.artik.io/hardware/artik-5
>> [2] http://www.digikey.com/product-detail/en/SIP-KITNXB001/1510-1316-ND/5825102
>
> I guess the rest of patches depend on new clocks, right?
Yes. The new clocks(uart2, mmc2) are used for artik5 module.
- uart2 is used for serial log for debug
- mmc2 is for external sd card
Best Regards,
Chanwoo Choi
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v2 5/7] ARM: dts: Add exynos3250-artik5 dtsi file for ARTIK5 module
2016-03-15 2:33 ` Krzysztof Kozlowski
@ 2016-03-15 2:42 ` Chanwoo Choi
0 siblings, 0 replies; 17+ messages in thread
From: Chanwoo Choi @ 2016-03-15 2:42 UTC (permalink / raw)
To: Krzysztof Kozlowski, kgene, s.nawrocki, tomasz.figa
Cc: jh80.chung, andi.shyti, inki.dae, sw0312.kim, pankaj.dubey,
linux-samsung-soc, linux-arm-kernel, linux-kernel, devicetree
On 2016년 03월 15일 11:33, Krzysztof Kozlowski wrote:
> On 15.03.2016 11:08, Chanwoo Choi wrote:
>> This patch adds the support for Device Tree source for Samsung ARTIK5 module[1]
>> based on Exynos3250 SoC. The ARTIK5 module includes the follwoing devices:
>> - Application Processor (Samsung Exynos3250)
>> - WiFi/BT Combo chip (Broadcom4354)
>> - PMIC (Samsung S2MPS14)
>> - eMMC (4GB)
>> - DRAM LPDDR3 (512MB)
>> - Connectors pin (60 Pins x 3 set)
>>
>> Also, this patch adds the ARTIK5 evaluation board[2] dts file which includes
>> the ARTIK5 module[1] and have the devices such as sound codec, sd card port,
>> ethernet port, uart port and so on.
>>
>> [1] https://www.artik.io/hardware/artik-5
>> [2] http://www.digikey.com/product-search/en?FV=ffecca14
>>
>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
>> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
>> ---
>> .../bindings/arm/samsung/samsung-boards.txt | 2 +
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/exynos3250-artik5-eval.dts | 26 ++
>> arch/arm/boot/dts/exynos3250-artik5.dtsi | 334 +++++++++++++++++++++
>> 4 files changed, 363 insertions(+)
>> create mode 100644 arch/arm/boot/dts/exynos3250-artik5-eval.dts
>> create mode 100644 arch/arm/boot/dts/exynos3250-artik5.dtsi
>>
>> diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
>> index 12129c011c8f..f5deace2b380 100644
>> --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
>> +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
>> @@ -2,6 +2,8 @@
>>
>> Required root node properties:
>> - compatible = should be one or more of the following.
>> + - "samsung,artik5" - for Exynos3250-based Samsung ARTIK5 module.
>> + - "samsung,artik5-eval" - for Exynos3250-based Samsung ARTIK5 eval board.
>> - "samsung,monk" - for Exynos3250-based Samsung Simband board.
>> - "samsung,rinato" - for Exynos3250-based Samsung Gear2 board.
>> - "samsung,smdkv310" - for Exynos4210-based Samsung SMDKV310 eval board.
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index a4a6d70e8b26..85cd586ea3d2 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -108,6 +108,7 @@ dtb-$(CONFIG_ARCH_DIGICOLOR) += \
>> dtb-$(CONFIG_ARCH_EFM32) += \
>> efm32gg-dk3750.dtb
>> dtb-$(CONFIG_ARCH_EXYNOS3) += \
>> + exynos3250-artik5-eval.dtb \
>> exynos3250-monk.dtb \
>> exynos3250-rinato.dtb
>> dtb-$(CONFIG_ARCH_EXYNOS4) += \
>> diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
>> new file mode 100644
>> index 000000000000..b476154590a5
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
>> @@ -0,0 +1,26 @@
>> +/*
>> + * Samsung's Exynos3250 based ARTIK5 evaluation board device tree source
>> + *
>> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
>> + * http://www.samsung.com
>> + *
>> + * Device tree source file for Samsung's ARTIK5 evaluation board
>> + * which is based on Samsung Exynos3250 SoC.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +/dts-v1/;
>> +#include "exynos3250-artik5.dtsi"
>> +
>> +/ {
>> + model = "Samsung ARTIK5 evaluation board";
>> + compatible = "samsung,artik5-eval", "samsung,artik5",
>> + "samsung,exynos3250", "samsung,exynos3";
>> +};
>> +
>> +&serial_2 {
>> + status = "okay";
>> +};
>> diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
>> new file mode 100644
>> index 000000000000..206625ba8cf2
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
>> @@ -0,0 +1,334 @@
>> +/*
>> + * Samsung's Exynos3250 based ARTIK5 module device tree source
>> + *
>> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
>> + * http://www.samsung.com
>> + *
>> + * Device tree source file for Samsung's ARTIK5 module which is based on
>> + * Samsung Exynos3250 SoC.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include "exynos3250.dtsi"
>> +#include <dt-bindings/clock/samsung,s2mps11.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/gpio/gpio.h>
>
> Alphabetical order for dt-bindings includes: interrupt at the end.
OK. I'll keep it.
>
>> +
>> +/ {
>> + compatible = "samsung,artik5", "samsung,exynos3250", "samsung,exynos3";
>> +
>> + chosen {
>> + stdout-path = &serial_2;
>> + };
>> +
>> + memory {
>> + reg = <0x40000000 0x1ff00000>;
>> + };
>> +
>> + firmware@0205F000 {
>
> I meant same case for every hex, also in device node.
OK. I'll keep it.
>
>> + compatible = "samsung,secure-firmware";
>> + reg = <0x0205f000 0x1000>;
>> + };
>> +
>> + thermal-zones {
>> + cpu_thermal: cpu-thermal {
>> + cooling-maps {
>> + map0 {
>> + /* Corresponds to 500MHz */
>> + cooling-device = <&cpu0 5 5>;
>> + };
>> + map1 {
>> + /* Corresponds to 200MHz */
>> + cooling-device = <&cpu0 8 8>;
>> + };
[snip]
>> +
>> +&mshc_0 {
>> + num-slots = <1>;
>> + non-removable;
>> + cap-mmc-highspeed;
>> + card-detect-delay = <200>;
>> + vmmc-supply = <&ldo12_reg>;
>> + clock-frequency = <100000000>;
>> + clock-freq-min-max = <400000 100000000>;
>> + samsung,dw-mshc-ciu-div = <1>;
>> + samsung,dw-mshc-sdr-timing = <0 1>;
>> + samsung,dw-mshc-ddr-timing = <1 2>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
>> + bus-width = <8>;
>> + status = "okay";
>> +};
>> +
>> +&tmu {
>> + status = "okay";
>> +};
>> +
>> +&rtc {
>> + clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
>> + clock-names = "rtc", "rtc_src";
>> + status = "okay";
>> +};
>
> Alphabetical order please, so rtc before tmu.
>
> These are minor nits, so no need to resend. I can fix them when applying
> (but if resend happens then please fix them).
>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>
Thanks for your fixup.
Best Regards,
Chanwoo Choi
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v2 0/7] ARM: dts: Add new Exynos3250-based ARTIK5 module dtsi file
2016-03-15 2:39 ` Chanwoo Choi
@ 2016-03-15 2:44 ` Krzysztof Kozlowski
0 siblings, 0 replies; 17+ messages in thread
From: Krzysztof Kozlowski @ 2016-03-15 2:44 UTC (permalink / raw)
To: Chanwoo Choi, kgene, s.nawrocki, tomasz.figa
Cc: jh80.chung, andi.shyti, inki.dae, sw0312.kim, pankaj.dubey,
linux-samsung-soc, linux-arm-kernel, linux-kernel, devicetree
On 15.03.2016 11:39, Chanwoo Choi wrote:
> On 2016년 03월 15일 11:35, Krzysztof Kozlowski wrote:
>> On 15.03.2016 11:08, Chanwoo Choi wrote:
>>> This patchset add the support for Device Tree source for Samsung ARTIK5 module[1]
>>> based on Exynos3250 SoC and development board[2]. The ARTIK5 module includes
>>> the follwoing devices:
>>> - Application Processor (Samsung Exynos3250)
>>> - WiFi/BT Combo chip
>>> - PMIC (Samsung S2MPS14)
>>> - eMMC (4GB)
>>> - DRAM LPDDR3 (512MB)
>>> - Connectors pin (60 Pins x 3 set)
>>>
>>> Also, this patchset add the ARTIK5 development board[2] dts file which includes
>>> the ARTIK5 module[1] and have the devices such as sound codec, sd card port,
>>> ethernet port, uart port and so on.
>>>
>>> [1] https://www.artik.io/hardware/artik-5
>>> [2] http://www.digikey.com/product-detail/en/SIP-KITNXB001/1510-1316-ND/5825102
>>
>> I guess the rest of patches depend on new clocks, right?
>
> Yes. The new clocks(uart2, mmc2) are used for artik5 module.
> - uart2 is used for serial log for debug
> - mmc2 is for external sd card
Okay, so an ack from clock folks or a tag to pull would be nice.
Unfortunately merge window started so probably everything will wait...
BR,
Krzysztof
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v2 7/7] ARM: dts: Add initial gpio setting of MMC2 device for exynos3250-monk
2016-03-15 2:08 ` [PATCH v2 7/7] ARM: dts: Add initial gpio setting of MMC2 device for exynos3250-monk Chanwoo Choi
2016-03-15 2:38 ` Krzysztof Kozlowski
@ 2016-03-15 4:18 ` kbuild test robot
2016-03-15 4:25 ` Chanwoo Choi
1 sibling, 1 reply; 17+ messages in thread
From: kbuild test robot @ 2016-03-15 4:18 UTC (permalink / raw)
Cc: kbuild-all, k.kozlowski, kgene, s.nawrocki, tomasz.figa,
jh80.chung, andi.shyti, inki.dae, sw0312.kim, pankaj.dubey,
cw00.choi, linux-samsung-soc, linux-arm-kernel, linux-kernel,
devicetree
[-- Attachment #1: Type: text/plain, Size: 940 bytes --]
Hi Chanwoo,
[auto build test ERROR on v4.5-rc7]
[also build test ERROR on next-20160314]
[if your patch is applied to the wrong git tree, please drop us a note to help improving the system]
url: https://github.com/0day-ci/linux/commits/Chanwoo-Choi/ARM-dts-Add-new-Exynos3250-based-ARTIK5-module-dtsi-file/20160315-101326
config: arm-exynos_defconfig (attached as .config)
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=arm
All errors (new ones prefixed by >>):
>> Error: arch/arm/boot/dts/exynos3250-monk.dts:564.9-10 syntax error
FATAL ERROR: Unable to parse input tree
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
[-- Attachment #2: .config.gz --]
[-- Type: application/octet-stream, Size: 23852 bytes --]
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v2 7/7] ARM: dts: Add initial gpio setting of MMC2 device for exynos3250-monk
2016-03-15 4:18 ` kbuild test robot
@ 2016-03-15 4:25 ` Chanwoo Choi
0 siblings, 0 replies; 17+ messages in thread
From: Chanwoo Choi @ 2016-03-15 4:25 UTC (permalink / raw)
To: kbuild test robot
Cc: kbuild-all, k.kozlowski, kgene, s.nawrocki, tomasz.figa,
jh80.chung, andi.shyti, inki.dae, sw0312.kim, pankaj.dubey,
linux-samsung-soc, linux-arm-kernel, linux-kernel, devicetree
Hi,
On 2016년 03월 15일 13:18, kbuild test robot wrote:
> Hi Chanwoo,
>
> [auto build test ERROR on v4.5-rc7]
> [also build test ERROR on next-20160314]
> [if your patch is applied to the wrong git tree, please drop us a note to help improving the system]
>
> url: https://github.com/0day-ci/linux/commits/Chanwoo-Choi/ARM-dts-Add-new-Exynos3250-based-ARTIK5-module-dtsi-file/20160315-101326
> config: arm-exynos_defconfig (attached as .config)
> reproduce:
> wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
> chmod +x ~/bin/make.cross
> # save the attached .config to linux build tree
> make.cross ARCH=arm
>
> All errors (new ones prefixed by >>):
>
>>> Error: arch/arm/boot/dts/exynos3250-monk.dts:564.9-10 syntax error
> FATAL ERROR: Unable to parse input tree
> FATAL ERROR: Unable to parse input tree
This patch depend on patch[1]. I send the separate patch-set.
To build this patch, patch[1] should be applied. It is my mistake.
[1] https://lkml.org/lkml/2016/3/14/245
Best Regards,
Chanwoo Choi
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2016-03-15 4:25 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-03-15 2:08 [PATCH v2 0/7] ARM: dts: Add new Exynos3250-based ARTIK5 module dtsi file Chanwoo Choi
2016-03-15 2:08 ` [PATCH v2 1/7] clk: samsung: exynos3250: Add UART2 clock Chanwoo Choi
2016-03-15 2:08 ` [PATCH v2 2/7] clk: samsung: exynos3250: Add MMC2 clock Chanwoo Choi
[not found] ` <1458007695-3627-1-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-03-15 2:08 ` [PATCH v2 3/7] ARM: dts: Add UART2 dt node for Exynos3250 SoC Chanwoo Choi
2016-03-15 2:08 ` [PATCH v2 4/7] ARM: dts: Add MSHC2 " Chanwoo Choi
2016-03-15 2:08 ` [PATCH v2 7/7] ARM: dts: Add initial gpio setting of MMC2 device for exynos3250-monk Chanwoo Choi
2016-03-15 2:38 ` Krzysztof Kozlowski
2016-03-15 4:18 ` kbuild test robot
2016-03-15 4:25 ` Chanwoo Choi
2016-03-15 2:08 ` [PATCH v2 5/7] ARM: dts: Add exynos3250-artik5 dtsi file for ARTIK5 module Chanwoo Choi
[not found] ` <1458007695-3627-6-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-03-15 2:33 ` Krzysztof Kozlowski
2016-03-15 2:42 ` Chanwoo Choi
2016-03-15 2:08 ` [PATCH v2 6/7] ARM: dts: Add MSHC2 dt node for SD card for exynos3250-artik5-eval board Chanwoo Choi
2016-03-15 2:36 ` Krzysztof Kozlowski
2016-03-15 2:35 ` [PATCH v2 0/7] ARM: dts: Add new Exynos3250-based ARTIK5 module dtsi file Krzysztof Kozlowski
2016-03-15 2:39 ` Chanwoo Choi
2016-03-15 2:44 ` Krzysztof Kozlowski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).