[PATCH v3 0/2] iio: ad5272: Add support for Analog Devices digital potentiometers

[PATCH v3 0/2] iio: ad5272: Add support for Analog Devices digital potentiometers

[Phil Reid]

Add documentation and driver for the Analog Devices 5272.

Driver currently doesn't support programing the RDAC position to 
non-volatile memory. 

Changes from v2:
- docs: Fix polarity of reset-gpio example to match driver
- Use a cached aligned buffer for i2c
- remove old invalid comment from c&p

Changes from v1:
- Use spdx license id
- Use sizeof for i2c buffer lens
- Condense code a little when setting up i2c buf
- check val2 in raw write
- Add reset function. Perform a software reset if
  gpio reset pin is not defined
- remove THIS_MODULE assignment
- change of data to use index as per i2c device table


Phil Reid (2):
  dt-bindings: ad5272: Add bindings for Analog Devices digital
    potentiometers
  iio: ad5272: Add support for Analog Devices digital potentiometers

 .../bindings/iio/potentiometer/ad5272.txt          |  27 +++
 drivers/iio/potentiometer/Kconfig                  |  10 +
 drivers/iio/potentiometer/Makefile                 |   1 +
 drivers/iio/potentiometer/ad5272.c                 | 227 +++++++++++++++++++++
 4 files changed, 265 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt
 create mode 100644 drivers/iio/potentiometer/ad5272.c

-- 
1.8.3.1

[PATCH v3 1/2] dt-bindings: ad5272: Add bindings for Analog Devices digital potentiometers

[Phil Reid]

Add binding documentation for Analog Devices AD5272 and AD5274 digital
potentiometer devices.

Signed-off-by: Phil Reid <preid-qgqNFa1JUf/o2iN0hyhwsIdd74u8MsAO@public.gmane.org>
---
 .../bindings/iio/potentiometer/ad5272.txt          | 27 ++++++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt

diff --git a/Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt b/Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt
new file mode 100644
index 0000000..11e804c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt
@@ -0,0 +1,27 @@
+* Analog Devices AD5272 digital potentiometer driver
+
+The node for this driver must be a child node of a I2C controller, hence
+all mandatory properties for your controller must be specified. See directory:
+
+        Documentation/devicetree/bindings/i2c
+
+for more details.
+
+Required properties:
+	- compatible:  	Must be one of the following, depending on the model:
+			adi,ad5272-020
+			adi,ad5272-050
+			adi,ad5272-100
+			adi,ad5274-020
+			adi,ad5274-100
+
+Optional properties:
+ - reset-gpios: GPIO specification for the RESET input. This is an
+		active low signal to the PCA953x.
+
+Example:
+ad5272: ad5272@2f {
+	reg = <0x2F>;
+	compatible = "adi,ad5272-020";
+	reset-gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+};
-- 
1.8.3.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 2/2] iio: ad5272: Add support for Analog Devices digital potentiometers

[Phil Reid]

Add implementation for Analog Devices AD5272 and AD5274 digital
potentiometer devices.

Signed-off-by: Phil Reid <preid-qgqNFa1JUf/o2iN0hyhwsIdd74u8MsAO@public.gmane.org>
---
 drivers/iio/potentiometer/Kconfig  |  10 ++
 drivers/iio/potentiometer/Makefile |   1 +
 drivers/iio/potentiometer/ad5272.c | 231 +++++++++++++++++++++++++++++++++++++
 3 files changed, 242 insertions(+)
 create mode 100644 drivers/iio/potentiometer/ad5272.c

diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig
index 8bf2825..0b04063 100644
--- a/drivers/iio/potentiometer/Kconfig
+++ b/drivers/iio/potentiometer/Kconfig
@@ -5,6 +5,16 @@
 
 menu "Digital potentiometers"
 
+config AD5272
+	tristate "Analog Devices AD5272 Digital Potentiometer driver"
+	depends on I2C
+	help
+	  Say yes here to build support for the Analog Devices AD5272
+	  digital potentiometer chip.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad5272.
+
 config DS1803
 	tristate "Maxim Integrated DS1803 Digital Potentiometer driver"
 	depends on I2C
diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile
index 2260d40..498bbb8 100644
--- a/drivers/iio/potentiometer/Makefile
+++ b/drivers/iio/potentiometer/Makefile
@@ -3,6 +3,7 @@
 #
 
 # When adding new entries keep the list in alphabetical order
+obj-$(CONFIG_AD5272) += ad5272.o
 obj-$(CONFIG_DS1803) += ds1803.o
 obj-$(CONFIG_MAX5481) += max5481.o
 obj-$(CONFIG_MAX5487) += max5487.o
diff --git a/drivers/iio/potentiometer/ad5272.c b/drivers/iio/potentiometer/ad5272.c
new file mode 100644
index 0000000..b40f111
--- /dev/null
+++ b/drivers/iio/potentiometer/ad5272.c
@@ -0,0 +1,231 @@
+/*
+ * Analog Devices AD5372 digital potentiometer driver
+ * Copyright (C) 2018 Phil Reid <preid-qgqNFa1JUf/o2iN0hyhwsIdd74u8MsAO@public.gmane.org>
+ *
+ * Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/AD5272_5274.pdf
+ *
+ * DEVID	#Wipers	#Positions	Resistor Opts (kOhm)	i2c address
+ * ad5272	1	1024		20, 50, 100		01011xx
+ * ad5274	1	256		20, 100			01011xx
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+
+#define  AD5272_RDAC_WR  1
+#define  AD5272_RDAC_RD  2
+#define  AD5272_RESET    4
+#define  AD5272_CTL      7
+
+#define  AD5272_RDAC_WR_EN  BIT(1)
+
+struct ad5272_cfg {
+	int max_pos;
+	int kohms;
+	int shift;
+};
+
+enum ad5272_type {
+	AD5272_020,
+	AD5272_050,
+	AD5272_100,
+	AD5274_020,
+	AD5274_100,
+};
+
+static const struct ad5272_cfg ad5272_cfg[] = {
+	[AD5272_020] = { .max_pos = 1024, .kohms = 20 },
+	[AD5272_050] = { .max_pos = 1024, .kohms = 50 },
+	[AD5272_100] = { .max_pos = 1024, .kohms = 100 },
+	[AD5274_020] = { .max_pos = 256,  .kohms = 20,  .shift = 2 },
+	[AD5274_100] = { .max_pos = 256,  .kohms = 100, .shift = 2 },
+};
+
+struct ad5272_data {
+	struct i2c_client       *client;
+	struct mutex            lock;
+	const struct ad5272_cfg *cfg;
+	u8                      buf[2] ____cacheline_aligned;
+};
+
+static const struct iio_chan_spec ad5272_channel = {
+	.type = IIO_RESISTANCE,
+	.output = 1,
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+};
+
+static int ad5272_write(struct ad5272_data *data, int reg, int val)
+{
+	int ret;
+
+	data->buf[0] = (reg << 2) | ((val >> 8) & 0x3);
+	data->buf[1] = (u8)val;
+
+	mutex_lock(&data->lock);
+	ret = i2c_master_send(data->client, data->buf, sizeof(data->buf));
+	mutex_unlock(&data->lock);
+	return ret < 0 ? ret : 0;
+}
+
+static int ad5272_read(struct ad5272_data *data, int reg, int *val)
+{
+	int ret;
+
+	data->buf[0] = reg << 2;
+	data->buf[1] = 0;
+
+	mutex_lock(&data->lock);
+	ret = i2c_master_send(data->client, data->buf, sizeof(data->buf));
+	if (ret < 0)
+		goto error;
+
+	ret = i2c_master_recv(data->client, data->buf, sizeof(data->buf));
+	if (ret < 0)
+		goto error;
+
+	*val = ((data->buf[0] & 0x3) << 8) | data->buf[1];
+	ret = 0;
+error:
+	mutex_unlock(&data->lock);
+	return ret;
+}
+
+static int ad5272_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long mask)
+{
+	struct ad5272_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW: {
+		ret = ad5272_read(data, AD5272_RDAC_RD, val);
+		*val = *val >> data->cfg->shift;
+		return ret ? ret : IIO_VAL_INT;
+	}
+	case IIO_CHAN_INFO_SCALE:
+		*val = 1000 * data->cfg->kohms;
+		*val2 = data->cfg->max_pos;
+		return IIO_VAL_FRACTIONAL;
+	}
+
+	return -EINVAL;
+}
+
+static int ad5272_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long mask)
+{
+	struct ad5272_data *data = iio_priv(indio_dev);
+
+	if (mask != IIO_CHAN_INFO_RAW)
+		return -EINVAL;
+
+	if (val >= data->cfg->max_pos || val < 0 || val2)
+		return -EINVAL;
+
+	return ad5272_write(data, AD5272_RDAC_WR, val << data->cfg->shift);
+}
+
+static const struct iio_info ad5272_info = {
+	.read_raw = ad5272_read_raw,
+	.write_raw = ad5272_write_raw,
+};
+
+static int ad5272_reset(struct ad5272_data *data)
+{
+	struct gpio_desc *reset_gpio;
+
+	reset_gpio = devm_gpiod_get_optional(&data->client->dev, "reset",
+		GPIOD_OUT_LOW);
+	if (IS_ERR(reset_gpio))
+		return PTR_ERR(reset_gpio);
+
+	if (reset_gpio) {
+		udelay(1);
+		gpiod_set_value(reset_gpio, 1);
+	} else {
+		ad5272_write(data, AD5272_RESET, 0);
+	}
+	usleep_range(1000, 2000);
+	return 0;
+}
+
+static int ad5272_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct iio_dev *indio_dev;
+	struct ad5272_data *data;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, indio_dev);
+
+	data = iio_priv(indio_dev);
+	data->client = client;
+	mutex_init(&data->lock);
+	data->cfg = &ad5272_cfg[id->driver_data];
+
+	ret = ad5272_reset(data);
+	if (ret)
+		return ret;
+
+	ret = ad5272_write(data, AD5272_CTL, AD5272_RDAC_WR_EN);
+	if (ret < 0)
+		return -ENODEV;
+
+	indio_dev->dev.parent = dev;
+	indio_dev->info = &ad5272_info;
+	indio_dev->channels = &ad5272_channel;
+	indio_dev->num_channels = 1;
+	indio_dev->name = client->name;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+#if defined(CONFIG_OF)
+static const struct of_device_id ad5272_dt_ids[] = {
+	{ .compatible = "adi,ad5272-020", .data = (void *)AD5272_020 },
+	{ .compatible = "adi,ad5272-050", .data = (void *)AD5272_050 },
+	{ .compatible = "adi,ad5272-100", .data = (void *)AD5272_100 },
+	{ .compatible = "adi,ad5274-020", .data = (void *)AD5274_020 },
+	{ .compatible = "adi,ad5274-100", .data = (void *)AD5274_100 },
+	{}
+};
+MODULE_DEVICE_TABLE(of, ad5272_dt_ids);
+#endif /* CONFIG_OF */
+
+static const struct i2c_device_id ad5272_id[] = {
+	{ "ad5272-020", AD5272_020 },
+	{ "ad5272-050", AD5272_050 },
+	{ "ad5272-100", AD5272_100 },
+	{ "ad5274-020", AD5274_020 },
+	{ "ad5274-100", AD5274_100 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, ad5272_id);
+
+static struct i2c_driver ad5272_driver = {
+	.driver = {
+		.name	= "ad5272",
+		.of_match_table = of_match_ptr(ad5272_dt_ids),
+	},
+	.probe		= ad5272_probe,
+	.id_table	= ad5272_id,
+};
+
+module_i2c_driver(ad5272_driver);
+
+MODULE_AUTHOR("Phil Reid <preid-TeWIRZsGUAnP+dxuUfoltA@public.gmane.org>");
+MODULE_DESCRIPTION("AD5272 digital potentiometer");
+MODULE_LICENSE("GPL v2");
-- 
1.8.3.1

Re: [PATCH v3 2/2] iio: ad5272: Add support for Analog Devices digital potentiometers

[Jonathan Cameron]

On Wed, 17 Jan 2018 11:38:28 +0800
Phil Reid <preid-qgqNFa1JUf/o2iN0hyhwsIdd74u8MsAO@public.gmane.org> wrote:

> Add implementation for Analog Devices AD5272 and AD5274 digital
> potentiometer devices.
> 
> Signed-off-by: Phil Reid <preid-qgqNFa1JUf/o2iN0hyhwsIdd74u8MsAO@public.gmane.org>
A couple more minor comments.

Jonathan

> ---
>  drivers/iio/potentiometer/Kconfig  |  10 ++
>  drivers/iio/potentiometer/Makefile |   1 +
>  drivers/iio/potentiometer/ad5272.c | 231 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 242 insertions(+)
>  create mode 100644 drivers/iio/potentiometer/ad5272.c
> 
> diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig
> index 8bf2825..0b04063 100644
> --- a/drivers/iio/potentiometer/Kconfig
> +++ b/drivers/iio/potentiometer/Kconfig
> @@ -5,6 +5,16 @@
>  
>  menu "Digital potentiometers"
>  
> +config AD5272
> +	tristate "Analog Devices AD5272 Digital Potentiometer driver"
> +	depends on I2C
> +	help
> +	  Say yes here to build support for the Analog Devices AD5272
> +	  digital potentiometer chip.

You need to list he compatible parts here so that people looking for
the driver can find it.  Usually the short text states 'and similar'
and the help text contains a list of parts.  AD5274 is missing here.

> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called ad5272.
> +
>  config DS1803
>  	tristate "Maxim Integrated DS1803 Digital Potentiometer driver"
>  	depends on I2C
> diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile
> index 2260d40..498bbb8 100644
> --- a/drivers/iio/potentiometer/Makefile
> +++ b/drivers/iio/potentiometer/Makefile
> @@ -3,6 +3,7 @@
>  #
>  
>  # When adding new entries keep the list in alphabetical order
> +obj-$(CONFIG_AD5272) += ad5272.o
>  obj-$(CONFIG_DS1803) += ds1803.o
>  obj-$(CONFIG_MAX5481) += max5481.o
>  obj-$(CONFIG_MAX5487) += max5487.o
> diff --git a/drivers/iio/potentiometer/ad5272.c b/drivers/iio/potentiometer/ad5272.c
> new file mode 100644
> index 0000000..b40f111
> --- /dev/null
> +++ b/drivers/iio/potentiometer/ad5272.c
> @@ -0,0 +1,231 @@
> +/*
> + * Analog Devices AD5372 digital potentiometer driver
> + * Copyright (C) 2018 Phil Reid <preid-qgqNFa1JUf/o2iN0hyhwsIdd74u8MsAO@public.gmane.org>
> + *
> + * Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/AD5272_5274.pdf
> + *
> + * DEVID	#Wipers	#Positions	Resistor Opts (kOhm)	i2c address
> + * ad5272	1	1024		20, 50, 100		01011xx
> + * ad5274	1	256		20, 100			01011xx
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/iio/iio.h>
> +#include <linux/module.h>
> +
> +#define  AD5272_RDAC_WR  1
> +#define  AD5272_RDAC_RD  2
> +#define  AD5272_RESET    4
> +#define  AD5272_CTL      7
> +
> +#define  AD5272_RDAC_WR_EN  BIT(1)
> +
> +struct ad5272_cfg {
> +	int max_pos;
> +	int kohms;
> +	int shift;
> +};
> +
> +enum ad5272_type {
> +	AD5272_020,
> +	AD5272_050,
> +	AD5272_100,
> +	AD5274_020,
> +	AD5274_100,
> +};
> +
> +static const struct ad5272_cfg ad5272_cfg[] = {
> +	[AD5272_020] = { .max_pos = 1024, .kohms = 20 },
> +	[AD5272_050] = { .max_pos = 1024, .kohms = 50 },
> +	[AD5272_100] = { .max_pos = 1024, .kohms = 100 },
> +	[AD5274_020] = { .max_pos = 256,  .kohms = 20,  .shift = 2 },
> +	[AD5274_100] = { .max_pos = 256,  .kohms = 100, .shift = 2 },
> +};
> +
> +struct ad5272_data {
> +	struct i2c_client       *client;
> +	struct mutex            lock;
> +	const struct ad5272_cfg *cfg;
> +	u8                      buf[2] ____cacheline_aligned;
> +};
> +
> +static const struct iio_chan_spec ad5272_channel = {
> +	.type = IIO_RESISTANCE,
> +	.output = 1,
> +	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> +	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
> +};
> +
> +static int ad5272_write(struct ad5272_data *data, int reg, int val)
> +{
> +	int ret;
> +
> +	data->buf[0] = (reg << 2) | ((val >> 8) & 0x3);
> +	data->buf[1] = (u8)val;
> +
> +	mutex_lock(&data->lock);
> +	ret = i2c_master_send(data->client, data->buf, sizeof(data->buf));
> +	mutex_unlock(&data->lock);
> +	return ret < 0 ? ret : 0;
> +}
> +
> +static int ad5272_read(struct ad5272_data *data, int reg, int *val)
> +{
> +	int ret;
> +
> +	data->buf[0] = reg << 2;
> +	data->buf[1] = 0;
> +
> +	mutex_lock(&data->lock);
> +	ret = i2c_master_send(data->client, data->buf, sizeof(data->buf));
> +	if (ret < 0)
> +		goto error;
> +
> +	ret = i2c_master_recv(data->client, data->buf, sizeof(data->buf));
> +	if (ret < 0)
> +		goto error;
> +
> +	*val = ((data->buf[0] & 0x3) << 8) | data->buf[1];
> +	ret = 0;
> +error:
> +	mutex_unlock(&data->lock);
> +	return ret;
> +}
> +
> +static int ad5272_read_raw(struct iio_dev *indio_dev,
> +			   struct iio_chan_spec const *chan,
> +			   int *val, int *val2, long mask)
> +{
> +	struct ad5272_data *data = iio_priv(indio_dev);
> +	int ret;
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW: {
> +		ret = ad5272_read(data, AD5272_RDAC_RD, val);
> +		*val = *val >> data->cfg->shift;
> +		return ret ? ret : IIO_VAL_INT;
> +	}
> +	case IIO_CHAN_INFO_SCALE:
> +		*val = 1000 * data->cfg->kohms;
> +		*val2 = data->cfg->max_pos;
> +		return IIO_VAL_FRACTIONAL;
> +	}
> +
> +	return -EINVAL;
> +}
> +
> +static int ad5272_write_raw(struct iio_dev *indio_dev,
> +			    struct iio_chan_spec const *chan,
> +			    int val, int val2, long mask)
> +{
> +	struct ad5272_data *data = iio_priv(indio_dev);
> +
> +	if (mask != IIO_CHAN_INFO_RAW)
> +		return -EINVAL;
> +
> +	if (val >= data->cfg->max_pos || val < 0 || val2)
> +		return -EINVAL;
> +
> +	return ad5272_write(data, AD5272_RDAC_WR, val << data->cfg->shift);
> +}
> +
> +static const struct iio_info ad5272_info = {
> +	.read_raw = ad5272_read_raw,
> +	.write_raw = ad5272_write_raw,
> +};
> +
> +static int ad5272_reset(struct ad5272_data *data)
> +{
> +	struct gpio_desc *reset_gpio;
> +
> +	reset_gpio = devm_gpiod_get_optional(&data->client->dev, "reset",
> +		GPIOD_OUT_LOW);
> +	if (IS_ERR(reset_gpio))
> +		return PTR_ERR(reset_gpio);
> +
> +	if (reset_gpio) {
> +		udelay(1);
> +		gpiod_set_value(reset_gpio, 1);
> +	} else {
> +		ad5272_write(data, AD5272_RESET, 0);
> +	}
> +	usleep_range(1000, 2000);
kernel coding conventions (and readability) put a blank line
before return statements.

> +	return 0;
> +}
> +
> +static int ad5272_probe(struct i2c_client *client,
> +			const struct i2c_device_id *id)
> +{
> +	struct device *dev = &client->dev;
> +	struct iio_dev *indio_dev;
> +	struct ad5272_data *data;
> +	int ret;
> +
> +	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	i2c_set_clientdata(client, indio_dev);
> +
> +	data = iio_priv(indio_dev);
> +	data->client = client;
> +	mutex_init(&data->lock);
> +	data->cfg = &ad5272_cfg[id->driver_data];
> +
> +	ret = ad5272_reset(data);
> +	if (ret)
> +		return ret;
> +
> +	ret = ad5272_write(data, AD5272_CTL, AD5272_RDAC_WR_EN);
> +	if (ret < 0)
> +		return -ENODEV;
> +
> +	indio_dev->dev.parent = dev;
> +	indio_dev->info = &ad5272_info;
> +	indio_dev->channels = &ad5272_channel;
> +	indio_dev->num_channels = 1;
> +	indio_dev->name = client->name;
> +
> +	return devm_iio_device_register(dev, indio_dev);
> +}
> +
> +#if defined(CONFIG_OF)
> +static const struct of_device_id ad5272_dt_ids[] = {
> +	{ .compatible = "adi,ad5272-020", .data = (void *)AD5272_020 },
> +	{ .compatible = "adi,ad5272-050", .data = (void *)AD5272_050 },
> +	{ .compatible = "adi,ad5272-100", .data = (void *)AD5272_100 },
> +	{ .compatible = "adi,ad5274-020", .data = (void *)AD5274_020 },
> +	{ .compatible = "adi,ad5274-100", .data = (void *)AD5274_100 },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, ad5272_dt_ids);
> +#endif /* CONFIG_OF */
> +
> +static const struct i2c_device_id ad5272_id[] = {
> +	{ "ad5272-020", AD5272_020 },
> +	{ "ad5272-050", AD5272_050 },
> +	{ "ad5272-100", AD5272_100 },
> +	{ "ad5274-020", AD5274_020 },
> +	{ "ad5274-100", AD5274_100 },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(i2c, ad5272_id);
> +
> +static struct i2c_driver ad5272_driver = {
> +	.driver = {
> +		.name	= "ad5272",
> +		.of_match_table = of_match_ptr(ad5272_dt_ids),
> +	},
> +	.probe		= ad5272_probe,
> +	.id_table	= ad5272_id,
> +};
> +
> +module_i2c_driver(ad5272_driver);
> +
> +MODULE_AUTHOR("Phil Reid <preid-TeWIRZsGUAnP+dxuUfoltA@public.gmane.org>");
> +MODULE_DESCRIPTION("AD5272 digital potentiometer");
> +MODULE_LICENSE("GPL v2");

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v3 2/2] iio: ad5272: Add support for Analog Devices digital potentiometers

[Phil Reid]

On 21/01/2018 01:12, Jonathan Cameron wrote:
> On Wed, 17 Jan 2018 11:38:28 +0800
> Phil Reid <preid-qgqNFa1JUf/o2iN0hyhwsIdd74u8MsAO@public.gmane.org> wrote:
> 
>> Add implementation for Analog Devices AD5272 and AD5274 digital
>> potentiometer devices.
>>
>> Signed-off-by: Phil Reid <preid-qgqNFa1JUf/o2iN0hyhwsIdd74u8MsAO@public.gmane.org>
> A couple more minor comments.
> 
...

>>   menu "Digital potentiometers"
>>   
>> +config AD5272
>> +	tristate "Analog Devices AD5272 Digital Potentiometer driver"
>> +	depends on I2C
>> +	help
>> +	  Say yes here to build support for the Analog Devices AD5272
>> +	  digital potentiometer chip.
> 
> You need to list he compatible parts here so that people looking for
> the driver can find it.  Usually the short text states 'and similar'
> and the help text contains a list of parts.  AD5274 is missing here.

ok

...

>> +	if (reset_gpio) {
>> +		udelay(1);
>> +		gpiod_set_value(reset_gpio, 1);
>> +	} else {
>> +		ad5272_write(data, AD5272_RESET, 0);
>> +	}
>> +	usleep_range(1000, 2000);
> kernel coding conventions (and readability) put a blank line
> before return statements.
> ok

-- 
Regards
Phil Reid