From: "Leizhen (ThunderTown)" <thunder.leizhen@huawei.com>
To: Wei Xu <xuwei5@hisilicon.com>, Rob Herring <robh+dt@kernel.org>,
devicetree <devicetree@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Cc: Libin <huawei.libin@huawei.com>,
Kefeng Wang <wangkefeng.wang@huawei.com>
Subject: Re: [PATCH v3 02/21] dt-bindings: arm: hisilicon: split the dt-bindings of each controller into a separate file
Date: Mon, 28 Sep 2020 20:51:09 +0800 [thread overview]
Message-ID: <885ea642-2e4b-c1ae-094b-831638a1eba9@huawei.com> (raw)
In-Reply-To: <5F71D923.3040509@hisilicon.com>
On 2020/9/28 20:37, Wei Xu wrote:
> Hi Zhen Lei,
>
>
>
> On 2020/9/27 14:21, Zhen Lei wrote:
>> Split the devicetree bindings of each Hisilicon controller from
>> hisilicon.txt into a separate file, the file name is the compatible name
>> attach the .txt file name extension.
>>
>> All Hi6220 dedicated controllers are grouped into subdirectory "hi3620".
>> All HiPxx dedicated controllers are grouped into subdirectory "hipxx"
>
> Some of the IPs are maybe shared among the different SoCs.
> I think it is better not to group by SoCs.
> Otherwise looks fine to me.
> Thanks!
OK, I will discard the subdirectory "hi3620" and "hipxx".
>
> Best Regards,
> Wei
>
>>
>> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
>> ---
>> .../controller/hi3620/hisilicon,hi6220-aoctrl.txt | 18 ++
>> .../hi3620/hisilicon,hi6220-mediactrl.txt | 18 ++
>> .../controller/hi3620/hisilicon,hi6220-pmctrl.txt | 18 ++
>> .../hi3620/hisilicon,hi6220-sramctrl.txt | 16 ++
>> .../controller/hi3620/hisilicon,hi6220-sysctrl.txt | 19 ++
>> .../controller/hipxx/hisilicon,hip01-sysctrl.txt | 19 ++
>> .../hipxx/hisilicon,hip04-bootwrapper.txt | 9 +
>> .../controller/hipxx/hisilicon,hip04-fabric.txt | 5 +
>> .../arm/hisilicon/controller/hisilicon,cpuctrl.txt | 8 +
>> .../hisilicon/controller/hisilicon,dsa-subctrl.txt | 15 ++
>> .../controller/hisilicon,hi3798cv200-perictrl.txt | 21 ++
>> .../controller/hisilicon,pcie-sas-subctrl.txt | 15 ++
>> .../arm/hisilicon/controller/hisilicon,pctrl.txt | 13 +
>> .../controller/hisilicon,peri-subctrl.txt | 16 ++
>> .../arm/hisilicon/controller/hisilicon,sysctrl.txt | 25 ++
>> .../bindings/arm/hisilicon/hisilicon.txt | 264 +--------------------
>> 16 files changed, 236 insertions(+), 263 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hi3620/hisilicon,hi6220-aoctrl.txt
>> create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hi3620/hisilicon,hi6220-mediactrl.txt
>> create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hi3620/hisilicon,hi6220-pmctrl.txt
>> create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hi3620/hisilicon,hi6220-sramctrl.txt
>> create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hi3620/hisilicon,hi6220-sysctrl.txt
>> create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hipxx/hisilicon,hip01-sysctrl.txt
>> create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hipxx/hisilicon,hip04-bootwrapper.txt
>> create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hipxx/hisilicon,hip04-fabric.txt
>> create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,cpuctrl.txt
>> create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,dsa-subctrl.txt
>> create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi3798cv200-perictrl.txt
>> create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,pcie-sas-subctrl.txt
>> create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,pctrl.txt
>> create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,peri-subctrl.txt
>> create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,sysctrl.txt
>>
>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3620/hisilicon,hi6220-aoctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3620/hisilicon,hi6220-aoctrl.txt
>> new file mode 100644
>> index 000000000000000..8f70ac0ebbdf252
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3620/hisilicon,hi6220-aoctrl.txt
>> @@ -0,0 +1,18 @@
>> +Hisilicon Hi6220 Power Always ON domain controller
>> +
>> +Required properties:
>> +- compatible : "hisilicon,hi6220-aoctrl"
>> +- reg : Register address and size
>> +- #clock-cells: should be set to 1, many clock registers are defined
>> + under this controller and this property must be present.
>> +
>> +Hisilicon designs this system controller to control the power always
>> +on domain for mobile platform.
>> +
>> +Example:
>> + /*for Hi6220*/
>> + ao_ctrl: ao_ctrl@f7800000 {
>> + compatible = "hisilicon,hi6220-aoctrl", "syscon";
>> + reg = <0x0 0xf7800000 0x0 0x2000>;
>> + #clock-cells = <1>;
>> + };
>> \ No newline at end of file
>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3620/hisilicon,hi6220-mediactrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3620/hisilicon,hi6220-mediactrl.txt
>> new file mode 100644
>> index 000000000000000..95bf5f5c7abed7c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3620/hisilicon,hi6220-mediactrl.txt
>> @@ -0,0 +1,18 @@
>> +Hisilicon Hi6220 Media domain controller
>> +
>> +Required properties:
>> +- compatible : "hisilicon,hi6220-mediactrl"
>> +- reg : Register address and size
>> +- #clock-cells: should be set to 1, many clock registers are defined
>> + under this controller and this property must be present.
>> +
>> +Hisilicon designs this system controller to control the multimedia
>> +domain(e.g. codec, G3D ...) for mobile platform.
>> +
>> +Example:
>> + /*for Hi6220*/
>> + media_ctrl: media_ctrl@f4410000 {
>> + compatible = "hisilicon,hi6220-mediactrl", "syscon";
>> + reg = <0x0 0xf4410000 0x0 0x1000>;
>> + #clock-cells = <1>;
>> + };
>> \ No newline at end of file
>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3620/hisilicon,hi6220-pmctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3620/hisilicon,hi6220-pmctrl.txt
>> new file mode 100644
>> index 000000000000000..46f5d8c775cea25
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3620/hisilicon,hi6220-pmctrl.txt
>> @@ -0,0 +1,18 @@
>> +Hisilicon Hi6220 Power Management domain controller
>> +
>> +Required properties:
>> +- compatible : "hisilicon,hi6220-pmctrl"
>> +- reg : Register address and size
>> +- #clock-cells: should be set to 1, some clock registers are define
>> + under this controller and this property must be present.
>> +
>> +Hisilicon designs this system controller to control the power management
>> +domain for mobile platform.
>> +
>> +Example:
>> + /*for Hi6220*/
>> + pm_ctrl: pm_ctrl@f7032000 {
>> + compatible = "hisilicon,hi6220-pmctrl", "syscon";
>> + reg = <0x0 0xf7032000 0x0 0x1000>;
>> + #clock-cells = <1>;
>> + };
>> \ No newline at end of file
>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3620/hisilicon,hi6220-sramctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3620/hisilicon,hi6220-sramctrl.txt
>> new file mode 100644
>> index 000000000000000..963a2cb13a249d9
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3620/hisilicon,hi6220-sramctrl.txt
>> @@ -0,0 +1,16 @@
>> +Hisilicon Hi6220 SRAM controller
>> +
>> +Required properties:
>> +- compatible : "hisilicon,hi6220-sramctrl", "syscon"
>> +- reg : Register address and size
>> +
>> +Hisilicon's SoCs use sram for multiple purpose; on Hi6220 there have several
>> +SRAM banks for power management, modem, security, etc. Further, use "syscon"
>> +managing the common sram which can be shared by multiple modules.
>> +
>> +Example:
>> + /*for Hi6220*/
>> + sram: sram@fff80000 {
>> + compatible = "hisilicon,hi6220-sramctrl", "syscon";
>> + reg = <0x0 0xfff80000 0x0 0x12000>;
>> + };
>> \ No newline at end of file
>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3620/hisilicon,hi6220-sysctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3620/hisilicon,hi6220-sysctrl.txt
>> new file mode 100644
>> index 000000000000000..2ded19f26e61a7c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3620/hisilicon,hi6220-sysctrl.txt
>> @@ -0,0 +1,19 @@
>> +Hisilicon Hi6220 system controller
>> +
>> +Required properties:
>> +- compatible : "hisilicon,hi6220-sysctrl"
>> +- reg : Register address and size
>> +- #clock-cells: should be set to 1, many clock registers are defined
>> + under this controller and this property must be present.
>> +
>> +Hisilicon designs this controller as one of the system controllers,
>> +its main functions are the same as Hisilicon system controller, but
>> +the register offset of some core modules are different.
>> +
>> +Example:
>> + /*for Hi6220*/
>> + sys_ctrl: sys_ctrl@f7030000 {
>> + compatible = "hisilicon,hi6220-sysctrl", "syscon";
>> + reg = <0x0 0xf7030000 0x0 0x2000>;
>> + #clock-cells = <1>;
>> + };
>> \ No newline at end of file
>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hipxx/hisilicon,hip01-sysctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hipxx/hisilicon,hip01-sysctrl.txt
>> new file mode 100644
>> index 000000000000000..7cc52596c82e583
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hipxx/hisilicon,hip01-sysctrl.txt
>> @@ -0,0 +1,19 @@
>> +Hisilicon HiP01 system controller
>> +
>> +Required properties:
>> +- compatible : "hisilicon,hip01-sysctrl"
>> +- reg : Register address and size
>> +
>> +The HiP01 system controller is mostly compatible with hisilicon
>> +system controller,but it has some specific control registers for
>> +HIP01 SoC family, such as slave core boot, and also some same
>> +registers located at different offset.
>> +
>> +Example:
>> +
>> + /* for hip01-ca9x2 */
>> + sysctrl: system-controller@10000000 {
>> + compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl";
>> + reg = <0x10000000 0x1000>;
>> + reboot-offset = <0x4>;
>> + };
>> \ No newline at end of file
>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hipxx/hisilicon,hip04-bootwrapper.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hipxx/hisilicon,hip04-bootwrapper.txt
>> new file mode 100644
>> index 000000000000000..baad98ec700e789
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hipxx/hisilicon,hip04-bootwrapper.txt
>> @@ -0,0 +1,9 @@
>> +Bootwrapper boot method (software protocol on SMP):
>> +
>> +Required Properties:
>> +- compatible: "hisilicon,hip04-bootwrapper";
>> +- boot-method: Address and size of boot method.
>> + [0]: bootwrapper physical address
>> + [1]: bootwrapper size
>> + [2]: relocation physical address
>> + [3]: relocation size
>> \ No newline at end of file
>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hipxx/hisilicon,hip04-fabric.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hipxx/hisilicon,hip04-fabric.txt
>> new file mode 100644
>> index 000000000000000..1709ac91d4cd99c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hipxx/hisilicon,hip04-fabric.txt
>> @@ -0,0 +1,5 @@
>> +Fabric:
>> +
>> +Required Properties:
>> +- compatible: "hisilicon,hip04-fabric";
>> +- reg: Address and size of Fabric
>> \ No newline at end of file
>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,cpuctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,cpuctrl.txt
>> new file mode 100644
>> index 000000000000000..0188ec93d2df70d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,cpuctrl.txt
>> @@ -0,0 +1,8 @@
>> +Hisilicon CPU controller
>> +
>> +Required properties:
>> +- compatible : "hisilicon,cpuctrl"
>> +- reg : Register address and size
>> +
>> +The clock registers and power registers of secondary cores are defined
>> +in CPU controller, especially in HIX5HD2 SoC.
>> \ No newline at end of file
>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,dsa-subctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,dsa-subctrl.txt
>> new file mode 100644
>> index 000000000000000..88f81760ddc8621
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,dsa-subctrl.txt
>> @@ -0,0 +1,15 @@
>> +Hisilicon HiP05/HiP06 DSA sub system controller
>> +
>> +Required properties:
>> +- compatible : "hisilicon,dsa-subctrl", "syscon";
>> +- reg : Register address and size
>> +
>> +The DSA sub system controller is shared by peripheral controllers in
>> +HiP05 or HiP06 Soc to implement some basic configurations.
>> +
>> +Example:
>> + /* for HiP05 dsa sub system */
>> + pcie_sas: system_controller@a0000000 {
>> + compatible = "hisilicon,dsa-subctrl", "syscon";
>> + reg = <0xa0000000 0x10000>;
>> + };
>> \ No newline at end of file
>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi3798cv200-perictrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi3798cv200-perictrl.txt
>> new file mode 100644
>> index 000000000000000..beca239e0830e76
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi3798cv200-perictrl.txt
>> @@ -0,0 +1,21 @@
>> +Hisilicon Hi3798CV200 Peripheral Controller
>> +
>> +The Hi3798CV200 Peripheral Controller controls peripherals, queries
>> +their status, and configures some functions of peripherals.
>> +
>> +Required properties:
>> +- compatible: Should contain "hisilicon,hi3798cv200-perictrl", "syscon"
>> + and "simple-mfd".
>> +- reg: Register address and size of Peripheral Controller.
>> +- #address-cells: Should be 1.
>> +- #size-cells: Should be 1.
>> +
>> +Examples:
>> +
>> + perictrl: peripheral-controller@8a20000 {
>> + compatible = "hisilicon,hi3798cv200-perictrl", "syscon",
>> + "simple-mfd";
>> + reg = <0x8a20000 0x1000>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + };
>> \ No newline at end of file
>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,pcie-sas-subctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,pcie-sas-subctrl.txt
>> new file mode 100644
>> index 000000000000000..43efdaf408f6fe1
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,pcie-sas-subctrl.txt
>> @@ -0,0 +1,15 @@
>> +Hisilicon HiP05/HiP06 PCIe-SAS sub system controller
>> +
>> +Required properties:
>> +- compatible : "hisilicon,pcie-sas-subctrl", "syscon";
>> +- reg : Register address and size
>> +
>> +The PCIe-SAS sub system controller is shared by PCIe and SAS controllers in
>> +HiP05 or HiP06 Soc to implement some basic configurations.
>> +
>> +Example:
>> + /* for HiP05 PCIe-SAS sub system */
>> + pcie_sas: system_controller@b0000000 {
>> + compatible = "hisilicon,pcie-sas-subctrl", "syscon";
>> + reg = <0xb0000000 0x10000>;
>> + };
>> \ No newline at end of file
>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,pctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,pctrl.txt
>> new file mode 100644
>> index 000000000000000..cb89a217c243066
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,pctrl.txt
>> @@ -0,0 +1,13 @@
>> +PCTRL: Peripheral misc control register
>> +
>> +Required Properties:
>> +- compatible: "hisilicon,pctrl"
>> +- reg: Address and size of pctrl.
>> +
>> +Example:
>> +
>> + /* for Hi3620 */
>> + pctrl: pctrl@fca09000 {
>> + compatible = "hisilicon,pctrl";
>> + reg = <0xfca09000 0x1000>;
>> + };
>> \ No newline at end of file
>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,peri-subctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,peri-subctrl.txt
>> new file mode 100644
>> index 000000000000000..95e58d43913c0d9
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,peri-subctrl.txt
>> @@ -0,0 +1,16 @@
>> +Hisilicon HiP05/HiP06 PERI sub system controller
>> +
>> +Required properties:
>> +- compatible : "hisilicon,peri-subctrl", "syscon";
>> +- reg : Register address and size
>> +
>> +The PERI sub system controller is shared by peripheral controllers in
>> +HiP05 or HiP06 Soc to implement some basic configurations. The peripheral
>> +controllers include mdio, ddr, iic, uart, timer and so on.
>> +
>> +Example:
>> + /* for HiP05 sub peri system */
>> + peri_c_subctrl: syscon@80000000 {
>> + compatible = "hisilicon,peri-subctrl", "syscon";
>> + reg = <0x0 0x80000000 0x0 0x10000>;
>> + };
>> \ No newline at end of file
>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,sysctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,sysctrl.txt
>> new file mode 100644
>> index 000000000000000..b62c4c5c0dd0bf8
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,sysctrl.txt
>> @@ -0,0 +1,25 @@
>> +Hisilicon system controller
>> +
>> +Required properties:
>> +- compatible : "hisilicon,sysctrl"
>> +- reg : Register address and size
>> +
>> +Optional properties:
>> +- smp-offset : offset in sysctrl for notifying slave cpu booting
>> + cpu 1, reg;
>> + cpu 2, reg + 0x4;
>> + cpu 3, reg + 0x8;
>> + If reg value is not zero, cpun exit wfi and go
>> +- resume-offset : offset in sysctrl for notifying cpu0 when resume
>> +- reboot-offset : offset in sysctrl for system reboot
>> +
>> +Example:
>> +
>> + /* for Hi3620 */
>> + sysctrl: system-controller@fc802000 {
>> + compatible = "hisilicon,sysctrl";
>> + reg = <0xfc802000 0x1000>;
>> + smp-offset = <0x31c>;
>> + resume-offset = <0x308>;
>> + reboot-offset = <0x4>;
>> + };
>> \ No newline at end of file
>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
>> index a97f643e7d1c760..f7e52476f5f2f3c 100644
>> --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
>> +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
>> @@ -54,266 +54,4 @@ Required root node properties:
>>
>> HiP07 D05 Board
>> Required root node properties:
>> - - compatible = "hisilicon,hip07-d05";
>> -
>> -Hisilicon system controller
>> -
>> -Required properties:
>> -- compatible : "hisilicon,sysctrl"
>> -- reg : Register address and size
>> -
>> -Optional properties:
>> -- smp-offset : offset in sysctrl for notifying slave cpu booting
>> - cpu 1, reg;
>> - cpu 2, reg + 0x4;
>> - cpu 3, reg + 0x8;
>> - If reg value is not zero, cpun exit wfi and go
>> -- resume-offset : offset in sysctrl for notifying cpu0 when resume
>> -- reboot-offset : offset in sysctrl for system reboot
>> -
>> -Example:
>> -
>> - /* for Hi3620 */
>> - sysctrl: system-controller@fc802000 {
>> - compatible = "hisilicon,sysctrl";
>> - reg = <0xfc802000 0x1000>;
>> - smp-offset = <0x31c>;
>> - resume-offset = <0x308>;
>> - reboot-offset = <0x4>;
>> - };
>> -
>> ------------------------------------------------------------------------
>> -Hisilicon Hi3798CV200 Peripheral Controller
>> -
>> -The Hi3798CV200 Peripheral Controller controls peripherals, queries
>> -their status, and configures some functions of peripherals.
>> -
>> -Required properties:
>> -- compatible: Should contain "hisilicon,hi3798cv200-perictrl", "syscon"
>> - and "simple-mfd".
>> -- reg: Register address and size of Peripheral Controller.
>> -- #address-cells: Should be 1.
>> -- #size-cells: Should be 1.
>> -
>> -Examples:
>> -
>> - perictrl: peripheral-controller@8a20000 {
>> - compatible = "hisilicon,hi3798cv200-perictrl", "syscon",
>> - "simple-mfd";
>> - reg = <0x8a20000 0x1000>;
>> - #address-cells = <1>;
>> - #size-cells = <1>;
>> - };
>> -
>> ------------------------------------------------------------------------
>> -Hisilicon Hi6220 system controller
>> -
>> -Required properties:
>> -- compatible : "hisilicon,hi6220-sysctrl"
>> -- reg : Register address and size
>> -- #clock-cells: should be set to 1, many clock registers are defined
>> - under this controller and this property must be present.
>> -
>> -Hisilicon designs this controller as one of the system controllers,
>> -its main functions are the same as Hisilicon system controller, but
>> -the register offset of some core modules are different.
>> -
>> -Example:
>> - /*for Hi6220*/
>> - sys_ctrl: sys_ctrl@f7030000 {
>> - compatible = "hisilicon,hi6220-sysctrl", "syscon";
>> - reg = <0x0 0xf7030000 0x0 0x2000>;
>> - #clock-cells = <1>;
>> - };
>> -
>> -
>> -Hisilicon Hi6220 Power Always ON domain controller
>> -
>> -Required properties:
>> -- compatible : "hisilicon,hi6220-aoctrl"
>> -- reg : Register address and size
>> -- #clock-cells: should be set to 1, many clock registers are defined
>> - under this controller and this property must be present.
>> -
>> -Hisilicon designs this system controller to control the power always
>> -on domain for mobile platform.
>> -
>> -Example:
>> - /*for Hi6220*/
>> - ao_ctrl: ao_ctrl@f7800000 {
>> - compatible = "hisilicon,hi6220-aoctrl", "syscon";
>> - reg = <0x0 0xf7800000 0x0 0x2000>;
>> - #clock-cells = <1>;
>> - };
>> -
>> -
>> -Hisilicon Hi6220 Media domain controller
>> -
>> -Required properties:
>> -- compatible : "hisilicon,hi6220-mediactrl"
>> -- reg : Register address and size
>> -- #clock-cells: should be set to 1, many clock registers are defined
>> - under this controller and this property must be present.
>> -
>> -Hisilicon designs this system controller to control the multimedia
>> -domain(e.g. codec, G3D ...) for mobile platform.
>> -
>> -Example:
>> - /*for Hi6220*/
>> - media_ctrl: media_ctrl@f4410000 {
>> - compatible = "hisilicon,hi6220-mediactrl", "syscon";
>> - reg = <0x0 0xf4410000 0x0 0x1000>;
>> - #clock-cells = <1>;
>> - };
>> -
>> -
>> -Hisilicon Hi6220 Power Management domain controller
>> -
>> -Required properties:
>> -- compatible : "hisilicon,hi6220-pmctrl"
>> -- reg : Register address and size
>> -- #clock-cells: should be set to 1, some clock registers are define
>> - under this controller and this property must be present.
>> -
>> -Hisilicon designs this system controller to control the power management
>> -domain for mobile platform.
>> -
>> -Example:
>> - /*for Hi6220*/
>> - pm_ctrl: pm_ctrl@f7032000 {
>> - compatible = "hisilicon,hi6220-pmctrl", "syscon";
>> - reg = <0x0 0xf7032000 0x0 0x1000>;
>> - #clock-cells = <1>;
>> - };
>> -
>> -
>> -Hisilicon Hi6220 SRAM controller
>> -
>> -Required properties:
>> -- compatible : "hisilicon,hi6220-sramctrl", "syscon"
>> -- reg : Register address and size
>> -
>> -Hisilicon's SoCs use sram for multiple purpose; on Hi6220 there have several
>> -SRAM banks for power management, modem, security, etc. Further, use "syscon"
>> -managing the common sram which can be shared by multiple modules.
>> -
>> -Example:
>> - /*for Hi6220*/
>> - sram: sram@fff80000 {
>> - compatible = "hisilicon,hi6220-sramctrl", "syscon";
>> - reg = <0x0 0xfff80000 0x0 0x12000>;
>> - };
>> -
>> ------------------------------------------------------------------------
>> -Hisilicon HiP01 system controller
>> -
>> -Required properties:
>> -- compatible : "hisilicon,hip01-sysctrl"
>> -- reg : Register address and size
>> -
>> -The HiP01 system controller is mostly compatible with hisilicon
>> -system controller,but it has some specific control registers for
>> -HIP01 SoC family, such as slave core boot, and also some same
>> -registers located at different offset.
>> -
>> -Example:
>> -
>> - /* for hip01-ca9x2 */
>> - sysctrl: system-controller@10000000 {
>> - compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl";
>> - reg = <0x10000000 0x1000>;
>> - reboot-offset = <0x4>;
>> - };
>> -
>> ------------------------------------------------------------------------
>> -Hisilicon HiP05/HiP06 PCIe-SAS sub system controller
>> -
>> -Required properties:
>> -- compatible : "hisilicon,pcie-sas-subctrl", "syscon";
>> -- reg : Register address and size
>> -
>> -The PCIe-SAS sub system controller is shared by PCIe and SAS controllers in
>> -HiP05 or HiP06 Soc to implement some basic configurations.
>> -
>> -Example:
>> - /* for HiP05 PCIe-SAS sub system */
>> - pcie_sas: system_controller@b0000000 {
>> - compatible = "hisilicon,pcie-sas-subctrl", "syscon";
>> - reg = <0xb0000000 0x10000>;
>> - };
>> -
>> -Hisilicon HiP05/HiP06 PERI sub system controller
>> -
>> -Required properties:
>> -- compatible : "hisilicon,peri-subctrl", "syscon";
>> -- reg : Register address and size
>> -
>> -The PERI sub system controller is shared by peripheral controllers in
>> -HiP05 or HiP06 Soc to implement some basic configurations. The peripheral
>> -controllers include mdio, ddr, iic, uart, timer and so on.
>> -
>> -Example:
>> - /* for HiP05 sub peri system */
>> - peri_c_subctrl: syscon@80000000 {
>> - compatible = "hisilicon,peri-subctrl", "syscon";
>> - reg = <0x0 0x80000000 0x0 0x10000>;
>> - };
>> -
>> -Hisilicon HiP05/HiP06 DSA sub system controller
>> -
>> -Required properties:
>> -- compatible : "hisilicon,dsa-subctrl", "syscon";
>> -- reg : Register address and size
>> -
>> -The DSA sub system controller is shared by peripheral controllers in
>> -HiP05 or HiP06 Soc to implement some basic configurations.
>> -
>> -Example:
>> - /* for HiP05 dsa sub system */
>> - pcie_sas: system_controller@a0000000 {
>> - compatible = "hisilicon,dsa-subctrl", "syscon";
>> - reg = <0xa0000000 0x10000>;
>> - };
>> -
>> ------------------------------------------------------------------------
>> -Hisilicon CPU controller
>> -
>> -Required properties:
>> -- compatible : "hisilicon,cpuctrl"
>> -- reg : Register address and size
>> -
>> -The clock registers and power registers of secondary cores are defined
>> -in CPU controller, especially in HIX5HD2 SoC.
>> -
>> ------------------------------------------------------------------------
>> -PCTRL: Peripheral misc control register
>> -
>> -Required Properties:
>> -- compatible: "hisilicon,pctrl"
>> -- reg: Address and size of pctrl.
>> -
>> -Example:
>> -
>> - /* for Hi3620 */
>> - pctrl: pctrl@fca09000 {
>> - compatible = "hisilicon,pctrl";
>> - reg = <0xfca09000 0x1000>;
>> - };
>> -
>> ------------------------------------------------------------------------
>> -Fabric:
>> -
>> -Required Properties:
>> -- compatible: "hisilicon,hip04-fabric";
>> -- reg: Address and size of Fabric
>> -
>> ------------------------------------------------------------------------
>> -Bootwrapper boot method (software protocol on SMP):
>> -
>> -Required Properties:
>> -- compatible: "hisilicon,hip04-bootwrapper";
>> -- boot-method: Address and size of boot method.
>> - [0]: bootwrapper physical address
>> - [1]: bootwrapper size
>> - [2]: relocation physical address
>> - [3]: relocation size
>> + - compatible = "hisilicon,hip07-d05";
>> \ No newline at end of file
>>
>
> .
>
next prev parent reply other threads:[~2020-09-28 12:51 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-27 6:21 [PATCH v3 00/21] add support for Hisilicon SD5203 SoC Zhen Lei
2020-09-27 6:21 ` [PATCH v3 01/21] ARM: dts: remove a unused compatible name in hip01-ca9x2.dts Zhen Lei
2020-09-27 6:21 ` [PATCH v3 02/21] dt-bindings: arm: hisilicon: split the dt-bindings of each controller into a separate file Zhen Lei
2020-09-28 12:37 ` Wei Xu
2020-09-28 12:51 ` Leizhen (ThunderTown) [this message]
2020-09-27 6:21 ` [PATCH v3 03/21] dt-bindings: arm: hisilicon: convert Hisilicon board/soc bindings to json-schema Zhen Lei
2020-09-28 12:05 ` Wei Xu
2020-09-28 12:14 ` Leizhen (ThunderTown)
2020-09-27 6:21 ` [PATCH v3 04/21] dt-bindings: arm: hisilicon: add binding for SD5203 SoC Zhen Lei
2020-09-27 6:21 ` [PATCH v3 05/21] ARM: hisi: add support " Zhen Lei
2020-09-27 6:21 ` [PATCH v3 06/21] ARM: debug: add UART early console support for SD5203 Zhen Lei
2020-09-27 6:21 ` [PATCH v3 07/21] ARM: dts: add SD5203 dts Zhen Lei
2020-09-27 6:21 ` [PATCH v3 08/21] dt-bindings: arm: hisilicon: convert system controller bindings to json-schema Zhen Lei
2020-09-28 9:44 ` Jonathan Cameron
2020-09-28 10:59 ` Leizhen (ThunderTown)
2020-09-27 6:21 ` [PATCH v3 09/21] dt-bindings: arm: hisilicon: convert hisilicon,peri-subctrl " Zhen Lei
2020-09-27 6:21 ` [PATCH v3 10/21] dt-bindings: arm: hisilicon: convert hisilicon,pcie-sas-subctrl " Zhen Lei
2020-09-28 9:46 ` [PATCH v3 10/21] dt-bindings: arm: hisilicon: convert hisilicon, pcie-sas-subctrl " Jonathan Cameron
2020-09-28 11:16 ` Leizhen (ThunderTown)
2020-09-27 6:21 ` [PATCH v3 11/21] dt-bindings: arm: hisilicon: convert hisilicon,cpuctrl " Zhen Lei
2020-09-27 6:21 ` [PATCH v3 12/21] dt-bindings: arm: hisilicon: convert hisilicon,pctrl " Zhen Lei
2020-09-27 6:21 ` [PATCH v3 13/21] dt-bindings: arm: hisilicon: convert hisilicon,hi3798cv200-perictrl " Zhen Lei
2020-09-27 6:21 ` [PATCH v3 14/21] dt-bindings: arm: hisilicon: convert hisilicon,dsa-subctrl " Zhen Lei
2020-09-27 6:21 ` [PATCH v3 15/21] dt-bindings: arm: hisilicon: convert hisilicon,hip04-fabric " Zhen Lei
2020-09-27 6:21 ` [PATCH v3 16/21] dt-bindings: arm: hisilicon: convert hisilicon,hip04-bootwrapper " Zhen Lei
2020-09-27 6:21 ` [PATCH v3 17/21] dt-bindings: arm: hisilicon: convert hisilicon,hi6220-aoctrl " Zhen Lei
2020-09-27 6:21 ` [PATCH v3 18/21] dt-bindings: arm: hisilicon: convert hisilicon,hi6220-mediactrl " Zhen Lei
2020-09-27 6:21 ` [PATCH v3 19/21] dt-bindings: arm: hisilicon: convert hisilicon,hi6220-pmctrl " Zhen Lei
2020-09-27 6:21 ` [PATCH v3 20/21] dt-bindings: arm: hisilicon: convert hisilicon,hi6220-sramctrl " Zhen Lei
2020-09-28 9:50 ` [PATCH v3 20/21] dt-bindings: arm: hisilicon: convert hisilicon, hi6220-sramctrl " Jonathan Cameron
2020-09-28 11:16 ` Leizhen (ThunderTown)
2020-09-27 6:21 ` [PATCH v3 21/21] dt-bindings: arm: hisilicon: convert LPC controller " Zhen Lei
2020-09-28 9:52 ` Jonathan Cameron
2020-09-28 11:19 ` Leizhen (ThunderTown)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=885ea642-2e4b-c1ae-094b-831638a1eba9@huawei.com \
--to=thunder.leizhen@huawei.com \
--cc=devicetree@vger.kernel.org \
--cc=huawei.libin@huawei.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=wangkefeng.wang@huawei.com \
--cc=xuwei5@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).