* [PATCH 0/3] arm64: dts: meson: misc ODROID-N2/N2+ changes @ 2021-03-29 16:12 Christian Hewitt 2021-03-29 16:12 ` [PATCH 1/3] arm64: dts: meson: remove extra tab from ODROID N2/N2+ ext_mdio node Christian Hewitt ` (2 more replies) 0 siblings, 3 replies; 10+ messages in thread From: Christian Hewitt @ 2021-03-29 16:12 UTC (permalink / raw) To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree, linux-arm-kernel, linux-amlogic, linux-kernel Cc: Christian Hewitt This series cleans-up and submits some minor patches used in HardKernel Linux 5.10 and 5.11 images for the ODROID N2/N2+, and fixes a stray tab. Christian Hewitt (1): arm64: dts: meson: remove extra tab from ODROID N2/N2+ ext_mdio node Hyeonki Hong (2): arm64: dts: meson: add saradc node to ODROID N2/N2+ arm64: dts: meson: add GPIO line names to ODROID N2/N2+ .../dts/amlogic/meson-g12b-odroid-n2.dtsi | 51 ++++++++++++++++++- 1 file changed, 50 insertions(+), 1 deletion(-) -- 2.17.1 ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 1/3] arm64: dts: meson: remove extra tab from ODROID N2/N2+ ext_mdio node 2021-03-29 16:12 [PATCH 0/3] arm64: dts: meson: misc ODROID-N2/N2+ changes Christian Hewitt @ 2021-03-29 16:12 ` Christian Hewitt 2021-03-30 15:22 ` Neil Armstrong 2021-04-05 20:54 ` Martin Blumenstingl 2021-03-29 16:12 ` [PATCH 2/3] arm64: dts: meson: add saradc node to ODROID N2/N2+ Christian Hewitt 2021-03-29 16:12 ` [PATCH 3/3] arm64: dts: meson: add GPIO line names " Christian Hewitt 2 siblings, 2 replies; 10+ messages in thread From: Christian Hewitt @ 2021-03-29 16:12 UTC (permalink / raw) To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree, linux-arm-kernel, linux-amlogic, linux-kernel Cc: Christian Hewitt Remove an extra tab from the ext_mdio node in the ODROID N2/N2+ common dtsi file. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> --- arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi index 58ce569b2ace..2f8d574c30c0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi @@ -410,7 +410,7 @@ &ext_mdio { external_phy: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ + /* Realtek RTL8211F (0x001cc916) */ reg = <0>; max-speed = <1000>; -- 2.17.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 1/3] arm64: dts: meson: remove extra tab from ODROID N2/N2+ ext_mdio node 2021-03-29 16:12 ` [PATCH 1/3] arm64: dts: meson: remove extra tab from ODROID N2/N2+ ext_mdio node Christian Hewitt @ 2021-03-30 15:22 ` Neil Armstrong 2021-04-05 20:54 ` Martin Blumenstingl 1 sibling, 0 replies; 10+ messages in thread From: Neil Armstrong @ 2021-03-30 15:22 UTC (permalink / raw) To: Christian Hewitt, Rob Herring, Mark Rutland, Kevin Hilman, devicetree, linux-arm-kernel, linux-amlogic, linux-kernel On 29/03/2021 18:12, Christian Hewitt wrote: > Remove an extra tab from the ext_mdio node in the ODROID N2/N2+ common > dtsi file. > > Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> > --- > arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi > index 58ce569b2ace..2f8d574c30c0 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi > @@ -410,7 +410,7 @@ > > &ext_mdio { > external_phy: ethernet-phy@0 { > - /* Realtek RTL8211F (0x001cc916) */ > + /* Realtek RTL8211F (0x001cc916) */ > reg = <0>; > max-speed = <1000>; > > Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 1/3] arm64: dts: meson: remove extra tab from ODROID N2/N2+ ext_mdio node 2021-03-29 16:12 ` [PATCH 1/3] arm64: dts: meson: remove extra tab from ODROID N2/N2+ ext_mdio node Christian Hewitt 2021-03-30 15:22 ` Neil Armstrong @ 2021-04-05 20:54 ` Martin Blumenstingl 1 sibling, 0 replies; 10+ messages in thread From: Martin Blumenstingl @ 2021-04-05 20:54 UTC (permalink / raw) To: Christian Hewitt Cc: Rob Herring, Mark Rutland, Kevin Hilman, devicetree, linux-arm-kernel, linux-amlogic, linux-kernel On Tue, Mar 30, 2021 at 1:17 AM Christian Hewitt <christianshewitt@gmail.com> wrote: > > Remove an extra tab from the ext_mdio node in the ODROID N2/N2+ common > dtsi file. > > Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 2/3] arm64: dts: meson: add saradc node to ODROID N2/N2+ 2021-03-29 16:12 [PATCH 0/3] arm64: dts: meson: misc ODROID-N2/N2+ changes Christian Hewitt 2021-03-29 16:12 ` [PATCH 1/3] arm64: dts: meson: remove extra tab from ODROID N2/N2+ ext_mdio node Christian Hewitt @ 2021-03-29 16:12 ` Christian Hewitt 2021-03-30 15:23 ` Neil Armstrong 2021-04-05 20:56 ` Martin Blumenstingl 2021-03-29 16:12 ` [PATCH 3/3] arm64: dts: meson: add GPIO line names " Christian Hewitt 2 siblings, 2 replies; 10+ messages in thread From: Christian Hewitt @ 2021-03-29 16:12 UTC (permalink / raw) To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree, linux-arm-kernel, linux-amlogic, linux-kernel Cc: Christian Hewitt, Hyeonki Hong From: Hyeonki Hong <hhk7734@gmail.com> Add the meson saradc node to the ODROID N2/N2+ common dtsi. Signed-off-by: Hyeonki Hong <hhk7734@gmail.com> --- arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi index 2f8d574c30c0..139c12cf9f66 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi @@ -508,6 +508,10 @@ status = "okay"; }; +&saradc { + status = "okay"; +}; + /* SD card */ &sd_emmc_b { status = "okay"; -- 2.17.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 2/3] arm64: dts: meson: add saradc node to ODROID N2/N2+ 2021-03-29 16:12 ` [PATCH 2/3] arm64: dts: meson: add saradc node to ODROID N2/N2+ Christian Hewitt @ 2021-03-30 15:23 ` Neil Armstrong 2021-04-05 20:56 ` Martin Blumenstingl 1 sibling, 0 replies; 10+ messages in thread From: Neil Armstrong @ 2021-03-30 15:23 UTC (permalink / raw) To: Christian Hewitt, Rob Herring, Mark Rutland, Kevin Hilman, devicetree, linux-arm-kernel, linux-amlogic, linux-kernel Cc: Hyeonki Hong Hi, On 29/03/2021 18:12, Christian Hewitt wrote: > From: Hyeonki Hong <hhk7734@gmail.com> > > Add the meson saradc node to the ODROID N2/N2+ common dtsi. Not sure why this is needed, does it fix something ? Neil > > Signed-off-by: Hyeonki Hong <hhk7734@gmail.com> > --- > arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi > index 2f8d574c30c0..139c12cf9f66 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi > @@ -508,6 +508,10 @@ > status = "okay"; > }; > > +&saradc { > + status = "okay"; > +}; > + > /* SD card */ > &sd_emmc_b { > status = "okay"; > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 2/3] arm64: dts: meson: add saradc node to ODROID N2/N2+ 2021-03-29 16:12 ` [PATCH 2/3] arm64: dts: meson: add saradc node to ODROID N2/N2+ Christian Hewitt 2021-03-30 15:23 ` Neil Armstrong @ 2021-04-05 20:56 ` Martin Blumenstingl 1 sibling, 0 replies; 10+ messages in thread From: Martin Blumenstingl @ 2021-04-05 20:56 UTC (permalink / raw) To: Christian Hewitt Cc: Rob Herring, Mark Rutland, Kevin Hilman, devicetree, linux-arm-kernel, linux-amlogic, linux-kernel, Hyeonki Hong On Tue, Mar 30, 2021 at 1:18 AM Christian Hewitt <christianshewitt@gmail.com> wrote: > > From: Hyeonki Hong <hhk7734@gmail.com> > > Add the meson saradc node to the ODROID N2/N2+ common dtsi. in general I am fine with this as some SAR ADC channels seem to be on the pin headers... [...] > +&saradc { > + status = "okay"; > +}; ...but a vref-supply should be provided to get meaningful numbers ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 3/3] arm64: dts: meson: add GPIO line names to ODROID N2/N2+ 2021-03-29 16:12 [PATCH 0/3] arm64: dts: meson: misc ODROID-N2/N2+ changes Christian Hewitt 2021-03-29 16:12 ` [PATCH 1/3] arm64: dts: meson: remove extra tab from ODROID N2/N2+ ext_mdio node Christian Hewitt 2021-03-29 16:12 ` [PATCH 2/3] arm64: dts: meson: add saradc node to ODROID N2/N2+ Christian Hewitt @ 2021-03-29 16:12 ` Christian Hewitt 2021-03-30 15:23 ` Neil Armstrong 2021-03-31 21:32 ` Kevin Hilman 2 siblings, 2 replies; 10+ messages in thread From: Christian Hewitt @ 2021-03-29 16:12 UTC (permalink / raw) To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree, linux-arm-kernel, linux-amlogic, linux-kernel Cc: Christian Hewitt, Hyeonki Hong From: Hyeonki Hong <hhk7734@gmail.com> Add GPIO line-name identifiers to the ODROID N2/N2+ common dtsi. Signed-off-by: Hyeonki Hong <hhk7734@gmail.com> --- .../dts/amlogic/meson-g12b-odroid-n2.dtsi | 45 +++++++++++++++++++ 1 file changed, 45 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi index 139c12cf9f66..4489715fc4f3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi @@ -446,6 +446,51 @@ }; &gpio { + gpio-line-names = + /* GPIOZ */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* GPIOH */ + "", "", "", "", "", "", "", "", + "", + /* BOOT */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* GPIOC */ + "", "", "", "", "", "", "", "", + /* GPIOA */ + "PIN_44", /* GPIOA_0 */ + "PIN_46", /* GPIOA_1 */ + "PIN_45", /* GPIOA_2 */ + "PIN_47", /* GPIOA_3 */ + "PIN_26", /* GPIOA_4 */ + "", "", "", "", "", "", + "PIN_42", /* GPIOA_11 */ + "PIN_32", /* GPIOA_12 */ + "PIN_7", /* GPIOA_13 */ + "PIN_27", /* GPIOA_14 */ + "PIN_28", /* GPIOA_15 */ + /* GPIOX */ + "PIN_16", /* GPIOX_0 */ + "PIN_18", /* GPIOX_1 */ + "PIN_22", /* GPIOX_2 */ + "PIN_11", /* GPIOX_3 */ + "PIN_13", /* GPIOX_4 */ + "PIN_33", /* GPIOX_5 */ + "PIN_35", /* GPIOX_6 */ + "PIN_15", /* GPIOX_7 */ + "PIN_19", /* GPIOX_8 */ + "PIN_21", /* GPIOX_9 */ + "PIN_24", /* GPIOX_10 */ + "PIN_23", /* GPIOX_11 */ + "PIN_8", /* GPIOX_12 */ + "PIN_10", /* GPIOX_13 */ + "PIN_29", /* GPIOX_14 */ + "PIN_31", /* GPIOX_15 */ + "PIN_12", /* GPIOX_16 */ + "PIN_3", /* GPIOX_17 */ + "PIN_5", /* GPIOX_18 */ + "PIN_36"; /* GPIOX_19 */ /* * WARNING: The USB Hub on the Odroid-N2 needs a reset signal * to be turned high in order to be detected by the USB Controller -- 2.17.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 3/3] arm64: dts: meson: add GPIO line names to ODROID N2/N2+ 2021-03-29 16:12 ` [PATCH 3/3] arm64: dts: meson: add GPIO line names " Christian Hewitt @ 2021-03-30 15:23 ` Neil Armstrong 2021-03-31 21:32 ` Kevin Hilman 1 sibling, 0 replies; 10+ messages in thread From: Neil Armstrong @ 2021-03-30 15:23 UTC (permalink / raw) To: Christian Hewitt, Rob Herring, Mark Rutland, Kevin Hilman, devicetree, linux-arm-kernel, linux-amlogic, linux-kernel Cc: Hyeonki Hong On 29/03/2021 18:12, Christian Hewitt wrote: > From: Hyeonki Hong <hhk7734@gmail.com> > > Add GPIO line-name identifiers to the ODROID N2/N2+ common dtsi. > > Signed-off-by: Hyeonki Hong <hhk7734@gmail.com> > --- > .../dts/amlogic/meson-g12b-odroid-n2.dtsi | 45 +++++++++++++++++++ > 1 file changed, 45 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi > index 139c12cf9f66..4489715fc4f3 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi > @@ -446,6 +446,51 @@ > }; > > &gpio { > + gpio-line-names = > + /* GPIOZ */ > + "", "", "", "", "", "", "", "", > + "", "", "", "", "", "", "", "", > + /* GPIOH */ > + "", "", "", "", "", "", "", "", > + "", > + /* BOOT */ > + "", "", "", "", "", "", "", "", > + "", "", "", "", "", "", "", "", > + /* GPIOC */ > + "", "", "", "", "", "", "", "", > + /* GPIOA */ > + "PIN_44", /* GPIOA_0 */ > + "PIN_46", /* GPIOA_1 */ > + "PIN_45", /* GPIOA_2 */ > + "PIN_47", /* GPIOA_3 */ > + "PIN_26", /* GPIOA_4 */ > + "", "", "", "", "", "", > + "PIN_42", /* GPIOA_11 */ > + "PIN_32", /* GPIOA_12 */ > + "PIN_7", /* GPIOA_13 */ > + "PIN_27", /* GPIOA_14 */ > + "PIN_28", /* GPIOA_15 */ > + /* GPIOX */ > + "PIN_16", /* GPIOX_0 */ > + "PIN_18", /* GPIOX_1 */ > + "PIN_22", /* GPIOX_2 */ > + "PIN_11", /* GPIOX_3 */ > + "PIN_13", /* GPIOX_4 */ > + "PIN_33", /* GPIOX_5 */ > + "PIN_35", /* GPIOX_6 */ > + "PIN_15", /* GPIOX_7 */ > + "PIN_19", /* GPIOX_8 */ > + "PIN_21", /* GPIOX_9 */ > + "PIN_24", /* GPIOX_10 */ > + "PIN_23", /* GPIOX_11 */ > + "PIN_8", /* GPIOX_12 */ > + "PIN_10", /* GPIOX_13 */ > + "PIN_29", /* GPIOX_14 */ > + "PIN_31", /* GPIOX_15 */ > + "PIN_12", /* GPIOX_16 */ > + "PIN_3", /* GPIOX_17 */ > + "PIN_5", /* GPIOX_18 */ > + "PIN_36"; /* GPIOX_19 */ > /* > * WARNING: The USB Hub on the Odroid-N2 needs a reset signal > * to be turned high in order to be detected by the USB Controller > Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 3/3] arm64: dts: meson: add GPIO line names to ODROID N2/N2+ 2021-03-29 16:12 ` [PATCH 3/3] arm64: dts: meson: add GPIO line names " Christian Hewitt 2021-03-30 15:23 ` Neil Armstrong @ 2021-03-31 21:32 ` Kevin Hilman 1 sibling, 0 replies; 10+ messages in thread From: Kevin Hilman @ 2021-03-31 21:32 UTC (permalink / raw) To: Christian Hewitt, Rob Herring, Mark Rutland, devicetree, linux-arm-kernel, linux-amlogic, linux-kernel Cc: Christian Hewitt, Hyeonki Hong Hi Christian, Christian Hewitt <christianshewitt@gmail.com> writes: > From: Hyeonki Hong <hhk7734@gmail.com> > > Add GPIO line-name identifiers to the ODROID N2/N2+ common dtsi. > > Signed-off-by: Hyeonki Hong <hhk7734@gmail.com> You need to add your SoB here also. Kevin ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2021-04-05 20:56 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-03-29 16:12 [PATCH 0/3] arm64: dts: meson: misc ODROID-N2/N2+ changes Christian Hewitt 2021-03-29 16:12 ` [PATCH 1/3] arm64: dts: meson: remove extra tab from ODROID N2/N2+ ext_mdio node Christian Hewitt 2021-03-30 15:22 ` Neil Armstrong 2021-04-05 20:54 ` Martin Blumenstingl 2021-03-29 16:12 ` [PATCH 2/3] arm64: dts: meson: add saradc node to ODROID N2/N2+ Christian Hewitt 2021-03-30 15:23 ` Neil Armstrong 2021-04-05 20:56 ` Martin Blumenstingl 2021-03-29 16:12 ` [PATCH 3/3] arm64: dts: meson: add GPIO line names " Christian Hewitt 2021-03-30 15:23 ` Neil Armstrong 2021-03-31 21:32 ` Kevin Hilman
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).