devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
 messages from 2018-01-18 08:40:16 to 2018-01-19 09:25:31 UTC [more...]

[PATCH v2 0/9] add UniPhier audio system support
 2018-01-19  9:25 UTC  (5+ messages)
` [PATCH v2 1/9] ASoC: uniphier: add DT bindings documentation for UniPhier AIO
` [PATCH v2 2/9] ASoC: uniphier: add support for UniPhier AIO common driver
` [PATCH v2 3/9] ASoC: uniphier: add support for UniPhier AIO DMA driver
  ` [PATCH v2 4/9] ASoC: uniphier: add support for UniPhier AIO CPU DAI driver

[PATCH v2 0/2] media: v4l: Add support for the Cadence MIPI-CSI2 TX controller
 2018-01-19  8:15 UTC  (3+ messages)
  ` [PATCH v2 1/2] dt-bindings: media: Add Cadence MIPI-CSI2 TX Device Tree bindings
` [PATCH v2 2/2] v4l: cadence: Add Cadence MIPI-CSI2 TX driver

[PATCH RESEND] phy: sun4i-usb: add support for R40 USB PHY
 2018-01-19  8:13 UTC  (5+ messages)
` [RESEND] "

[PATCH v5 0/2] media: v4l: Add support for the Cadence MIPI-CSI2 RX
 2018-01-19  8:13 UTC  (3+ messages)
  ` [PATCH v5 1/2] dt-bindings: media: Add Cadence MIPI-CSI2 RX Device Tree bindings
` [PATCH v5 2/2] v4l: cadence: Add Cadence MIPI-CSI2 RX driver

[PATCH v6 0/4] Add supports for OV2685 and OV5695 sensors
 2018-01-19  7:47 UTC  (4+ messages)
` [PATCH v6 4/4] media: ov2685: add support for OV2685 sensor

[PATCH V2 0/3] Microchip mcp25xxfd can controller driver
 2018-01-19  7:41 UTC  (4+ messages)
` [PATCH V2 1/3] dt-binding: can: mcp25xxfd: document device tree bindings
  ` [PATCH V2 2/3] can: mcp25xxfd: Add Microchip mcp25xxfd CAN FD driver
` [PATCH V2 3/3] can: mcp25xxfd: add gpiolib support for GPIO0/1 (aka. INT0/INT1)

[PATCH 0/4] drivers/qcom: add RPMH communication support
 2018-01-19  7:35 UTC  (7+ messages)
` [PATCH 1/4] drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs
` [PATCH 2/4] dt-bindings: introduce RPMH RSC bindings for Qualcomm SoCs
` [PATCH 3/4] drivers: qcom: rpmh-rsc: log RPMH requests in FTRACE
` [PATCH 4/4] drivers: qcom: rpmh: add RPMH helper functions

[patch v17 2/4] drivers: jtag: Add Aspeed SoC 24xx and 25xx families JTAG master driver
 2018-01-19  7:28 UTC  (2+ messages)

[PATCH v2 0/7] Introduce GENI SE Controller Driver
 2018-01-19  7:12 UTC  (8+ messages)
` [PATCH v2 3/7] soc: qcom: Add GENI based QUP Wrapper driver
` [PATCH v2 7/7] tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP

[PATCH v5 00/44] ARM: davinci: convert to common clock framework​
 2018-01-19  6:17 UTC  (15+ messages)
` [PATCH v5 20/44] dt-bindings: clock: Add bindings for TI DA8XX USB PHY clocks
` [PATCH v5 21/44] clk: davinci: New driver "
` [PATCH v5 24/44] ARM: da850: add new clock init using common clock framework
` [PATCH v5 29/44] ARM: da8xx: add new USB PHY "

[PATCH v5 40/44] ARM: da8xx: Remove legacy clock init
 2018-01-19  6:14 UTC  (5+ messages)
` [PATCH v5 43/44] ARM: da8xx-dt: switch to device tree clocks

[PATCH 0/4] dmaengine: qcom: bam_dma: fixes for remotely controlled bam
 2018-01-19  5:55 UTC  (5+ messages)
` [PATCH 1/4] dmaengine: qcom: bam_dma: make bam clk optional
` [PATCH 2/4] dmaengine: qcom: bam_dma: add num-channels binding for remotely controlled

[PATCH v4 00/13] iommu/rockchip: Use OF_IOMMU
 2018-01-19  5:12 UTC  (10+ messages)
` [PATCH v4 07/13] ARM: dts: rockchip: add clocks in vop iommu nodes
  ` [PATCH v4 08/13] iommu/rockchip: Control clocks needed to access the IOMMU

[RFCv2 PATCH 00/36] Process management for IOMMU + SVM for SMMUv3
 2018-01-19  4:52 UTC  (3+ messages)
` [RFCv2 PATCH 05/36] iommu/process: Bind and unbind process to and from devices

[PATCH 0/3] hisi_sas: v2 hw LED support
 2018-01-19  2:35 UTC  (2+ messages)

[PATCH] ARM: dts: imx6ull: add Toradex Colibri iMX6ULL support
 2018-01-19  0:11 UTC 

[PATCH v3 0/6] PCI: Add support to the Cadence PCIe controller
 2018-01-18 23:23 UTC  (9+ messages)
` [PATCH v3 3/6] PCI: Add generic function to probe PCI host controllers
` [PATCH v3 6/6] PCI: cadence: Add host driver for Cadence PCIe controller

[PATCH v4 0/7] PCI: Add support to the Cadence PCIe controller
 2018-01-18 22:52 UTC  (8+ messages)
  ` [PATCH v4 1/7] PCI: Regroup all PCI related entries into drivers/pci/Makefile
` [PATCH v4 2/7] PCI: OF: Add generic function to parse and allocate PCI resources
` [PATCH v4 3/7] PCI: generic: fix missing call of pci_free_resource_list()
` [PATCH v4 4/7] PCI: Add generic function to probe PCI host controllers
` [PATCH v4 5/7] PCI: Add vendor ID for Cadence
` [PATCH v4 6/7] dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller
` [PATCH v4 7/7] PCI: cadence: Add host driver for Cadence PCIe controller

[PATCH v5 0/4] Add supports for OV2685 and OV5695 sensors
 2018-01-18 22:30 UTC  (5+ messages)
` [PATCH v5 1/4] dt-bindings: media: Add bindings for OV5695

[PATCH 2/2] dt-bindings: introduce Command DB for QCOM SoCs
 2018-01-18 22:28 UTC 

[PATCH v3 0/2] media: ov7670: Implement mbus configuration
 2018-01-18 22:26 UTC  (5+ messages)
` [PATCH v3 1/2] media: dt-bindings: Add OF properties to ov7670
` [PATCH v3 2/2] v4l2: i2c: ov7670: Implement OF mbus configuration

[PATCH v3 1/2] dt-bindings: Document mti,mips-cpc binding
 2018-01-18 22:26 UTC  (2+ messages)

[PATCH] Nokia N9: add support for up/down keys in the dts
 2018-01-18 22:03 UTC  (3+ messages)

[patch v15 0/4] JTAG driver introduction
 2018-01-18 21:27 UTC  (3+ messages)
` [patch v15 4/4] Documentation: jtag: Add ABI documentation

[PATCH v2 2/2] drm: rcar-du: add R8A77970 support
 2018-01-18 21:05 UTC 

[PATCH v2 2/2] drm: rcar-du: add R8A77970 support
 2018-01-18 21:05 UTC 

[PATCH v2 1/2] DT: display: renesas,du: document R8A77970 bindings
 2018-01-18 21:05 UTC 

[PATCH v2 0/2] Add R-Car V3M (R8A77970) support to the DU driver
 2018-01-18 21:05 UTC 

[PATCH v2 0/2] Add R-Car V3M (R8A77970) support to the DU driver
 2018-01-18 21:05 UTC 

[PATCH v2 0/4] gpio: driver for the RPi3 GPIO expander
 2018-01-18 20:50 UTC  (7+ messages)
` [PATCH v2 1/4] ARM: bcm2835: sync firmware properties with downstream

[PATCH] dts-bindings: usb-uhci: Document newly added properties
 2018-01-18 20:15 UTC  (2+ messages)

[PATCH 0/3] Reset USB3 controller before initializing Type-C PHY on rk3399
 2018-01-18 17:47 UTC  (9+ messages)
` [PATCH 1/3] dt-bindings: phy: phy-rockchip-typec: add usb3 otg reset
` [PATCH 2/3] arm64: dts: rockchip: add USB3 OTG reset for Type-C PHY on rk3399
` [PATCH 3/3] phy: rockchip-typec: reset USB3 controller before initializing PHY

[PATCH 0/3] Improved perf support for imx53/ppd
 2018-01-18 17:43 UTC  (4+ messages)
` [PATCH 1/3] drivers/perf: arm_pmu: Add platform hardware setup hooks
` [PATCH 2/3] ARM: imx53: add SoC specific PMU setup
` [PATCH 3/3] ARM: dts: imx53: PPD: Enable secure-reg-access

[PATCH v3 00/14] Add MMCI support for STM32F SoCs family
 2018-01-18 17:16 UTC  (17+ messages)
` [PATCH v3 01/14] mmc: mmci: Don't pretend all variants to have MMCIMASK1 register
` [PATCH v3 02/14] mmc: mmci: Don't pretend all variants to have MCI_STARBITERR flag
` [PATCH v3 03/14] mmc: mmci: Don't pretend all variants to have OPENDRAIN bit
` [PATCH v3 04/14] mmc: mmci: Add support for setting pad type via pinctrl
` [PATCH v3 05/14] mmc: mmci: Add STM32 variant
` [PATCH v3 06/14] ARM: dts: stm32: Add SDIO controller for stm32f746
` [PATCH v3 07/14] ARM: dts: stm32: Add SDIO controller for stm32f429
` [PATCH v3 08/14] ARM: dts: stm32: Add pin map for SDIO controller on stm32f4
` [PATCH v3 09/14] ARM: dts: stm32: Enable SDIO controller on stm32f469 disco board
` [PATCH v3 10/14] ARM: dts: stm32: Enable SDIO controller on stm32429i-eval board
` [PATCH v3 11/14] ARM: stm32: Add AMBA support for STM32F4 and STM32F7 SoCs
` [PATCH v3 12/14] ARM: configs: stm32: Enable MMC_ARMMMCI support
` [PATCH v3 13/14] ARM: configs: stm32: Enable EXT3_FS support
` [PATCH v3 14/14] clk: stm32: Add clk entry for SDMMC2 on stm32F769

[PATCH 0/2] Add dsi clock for stm32f469 board
 2018-01-18 16:37 UTC  (5+ messages)
` [PATCH 1/2] clk: stm32: END_PRIMARY_CLK should be declare after CLK_SYSCLK
` [PATCH 2/2] clk: stm32: Add DSI clock for STM32F469 Board

[PATCH v3 00/12] drm/sun4i: Add A83T HDMI support
 2018-01-18 16:17 UTC  (10+ messages)
` [PATCH v3 01/12] clk: sunxi-ng: Mask nkmp factors when setting register
` [PATCH v3 02/12] clk: sunxi-ng: Change formula for NKMP PLLs
` [PATCH v3 04/12] drm/bridge/synopsys: dw-hdmi: Export some PHY related functions
` [PATCH v3 05/12] drm/bridge/synopsys: dw-hdmi: don't clobber drvdata

[PATCH] pinctrl: at91-pio4: add support for drive-strength property
 2018-01-18 16:02 UTC 

[PATCH v5 30/44] ARM: da8xx: add new sata_refclk init using common clock frmework
 2018-01-18 15:26 UTC  (3+ messages)
` [PATCH v5 33/44] ARM: davinci: switch to common clock framework

[PATCH v4 0/8] PCI: brcmstb: Add Broadcom Settopbox PCIe support
 2018-01-18 15:23 UTC  (6+ messages)
` [PATCH v4 4/8] PCI: brcmstb: Add dma-range mapping for inbound traffic

Aslam Alaikum!
 2018-01-18 15:17 UTC 

[PATCH -next] of: platform: fix OF node refcount leak
 2018-01-18 14:57 UTC  (2+ messages)

[RFC 0/2] dt-bindings: mipi-dsi: dual-channel DSI bindings
 2018-01-18 14:55 UTC  (4+ messages)
` [RFC v2 "
  ` [RFC v2 1/2] dt-bindings: mipi-dsi: Add info about peripherals with non-DSI control bus

[PATCH] ARM: dts: at91: sama5d4: fix pinctrl compatible string
 2018-01-18 14:38 UTC 

[PATCH 1/1] ARM: dts: sunxi: Add Olimex A20-SOM204-EVB board
 2018-01-18 14:28 UTC  (5+ messages)

[PATCH 1/5] dt-bindings: pinctrl: Add st, stm32f769-pinctrl compatible to stm32-pinctrl
 2018-01-18 14:05 UTC  (3+ messages)
` [PATCH 2/5] pinctrl: stm32: add STM32F769 MCU support

[PATCH v5 1/2] drm/bridge: Add Cadence DSI driver
 2018-01-18 13:43 UTC  (2+ messages)
  ` [PATCH v5 2/2] dt-bindings: drm/bridge: Document Cadence DSI bridge bindings

[PATCH v5 0/5] misc serdev: new serdev based driver for Wi2Wi w2sg00x4 GPS module
 2018-01-18 13:43 UTC  (9+ messages)
` [PATCH v5 3/5] misc serdev: Add w2sg0004 (gps receiver) power control driver
      ` [Letux-kernel] "

[PATCH v2 00/15] Add MMCI support for STM32F SoCs family
 2018-01-18 13:35 UTC  (7+ messages)
` [PATCH v2 03/15] mmc: mmci: Don't pretend all variants to have OPENDRAIN bit
` [PATCH v2 04/15] mmc: mmci: Add support for setting pad type via pinctrl

[Patch v6 02/12] [media] s5p-mfc: Adding initial support for MFC v10.10
 2018-01-18 13:19 UTC  (4+ messages)

[PATCH 1/3] staging: iio: adc: ad7192: fix external frequency setting
 2018-01-18 13:16 UTC  (4+ messages)
` [PATCH 3/3] staging: iio: docs: add ad7192 doc to detail dt usage

[PATCH 0/2] add ethernet nodes for UniPhier SoCs
 2018-01-18 12:48 UTC  (3+ messages)
  ` [PATCH 1/2] ARM: dts: uniphier: add AVE ethernet node
  ` [PATCH 2/2] arm64: "

[PATCH] arm64: dts: hisi: add hns-dsaf cpld control for the hip07 SoC
 2018-01-18 12:31 UTC 

[PATCH v2 0/3] Device tree fixes for Axentia TSE-850 and Nattis
 2018-01-18 11:46 UTC  (4+ messages)
  ` [PATCH v2 1/3] ARM: dts: at91: nattis: use up-to-date mtd partitions
` [PATCH v2 2/3] ARM: dts: at91: nattis: add lvds-encoder
` [PATCH v2 3/3] ARM: dts: at91: tse850: make the sound dai cell count explicit

[PATCH v6 0/3] clocksource/drivers/atcpit100: Add andestech atcpit100 timer
 2018-01-18 11:08 UTC  (5+ messages)
` [PATCH v6 2/3] clocksource/drivers/atcpit100: VDSO support
` [PATCH v6 3/3] dt-bindings: timer: Add andestech atcpit100 timer binding doc

[PATCH v6 00/36] Andes(nds32) Linux Kernel Port
 2018-01-18 11:03 UTC  (68+ messages)
` [PATCH v6 03/36] sparc: io: To use the define of ioremap_[nocache|wc|wb] in asm-generic/io.h
` [PATCH v6 04/36] earlycon: add reg-offset to physical address before mapping
` [PATCH v6 05/36] nds32: Assembly macros and definitions
` [PATCH v6 06/36] nds32: Kernel booting and initialization
` [PATCH v6 07/36] nds32: Exception handling
` [PATCH v6 08/36] nds32: MMU definitions
` [PATCH v6 09/36] nds32: MMU initialization
` [PATCH v6 10/36] nds32: MMU fault handling and page table management
` [PATCH v6 11/36] nds32: Cache and TLB routines
` [PATCH v6 12/36] nds32: Process management
` [PATCH v6 13/36] nds32: IRQ handling
` [PATCH v6 14/36] nds32: Atomic operations
` [PATCH v6 15/36] nds32: Device specific operations
` [PATCH v6 16/36] nds32: DMA mapping API
` [PATCH v6 17/36] nds32: ELF definitions
` [PATCH v6 18/36] nds32: System calls handling
` [PATCH v6 19/36] nds32: VDSO support
` [PATCH v6 20/36] nds32: Signal handling support
` [PATCH v6 21/36] nds32: Library functions
` [PATCH v6 22/36] nds32: Debugging support
` [PATCH v6 23/36] nds32: L2 cache support
` [PATCH v6 24/36] nds32: Loadable modules
` [PATCH v6 25/36] nds32: Generic timers support
` [PATCH v6 26/36] nds32: Device tree support
` [PATCH v6 27/36] nds32: Miscellaneous header files
` [PATCH v6 28/36] nds32: defconfig
` [PATCH v6 29/36] nds32: Build infrastructure
` [PATCH v6 30/36] MAINTAINERS: Add nds32
` [PATCH v6 31/36] dt-bindings: nds32 CPU Bindings
` [PATCH v6 32/36] dt-bindings: nds32 L2 cache controller Bindings
` [PATCH v6 33/36] dt-bindings: nds32 SoC Bindings
` [PATCH v6 34/36] dt-bindings: interrupt-controller: Andestech Internal Vector Interrupt Controller
` [PATCH v6 36/36] net: faraday add nds32 support

[PATCH] kbuild: fix W= option checks for extra DTC warnings
 2018-01-18  9:25 UTC  (2+ messages)

[PATCH v2 00/16] extend PWM framework to support PWM modes
 2018-01-18  9:18 UTC  (14+ messages)
` [PATCH v2 01/16] drivers: pwm: core: use a single of xlate function
` [PATCH v2 03/16] pwm: cros-ec: update documentation regarding pwm-cells

[PATCH v5 00/12] [dt-bindings] [media] Add document file and driver for Sony CXD2880 DVB-T2/T tuner + demodulator
 2018-01-18  8:59 UTC  (13+ messages)
` [PATCH v5 04/12] [media] cxd2880: Add spi device IO routines
` [PATCH v5 05/12] [media] cxd2880: Add tuner part of the driver
` [PATCH v5 06/12] [media] cxd2880: Add integration layer for "
` [PATCH v5 09/12] [media] cxd2880: Add DVB-T monitor functions
  ` [PATCH v5 01/12] [dt-bindings] [media] Add document file for CXD2880 SPI I/F
  ` [PATCH v5 02/12] [media] cxd2880-spi: Add support for CXD2880 SPI interface
  ` [PATCH v5 03/12] [media] cxd2880: Add common files for the driver
  ` [PATCH v5 07/12] [media] cxd2880: Add top level of "
  ` [PATCH v5 08/12] [media] cxd2880: Add DVB-T control functions "
  ` [PATCH v5 10/12] [media] cxd2880: Add DVB-T2 control functions for "
  ` [PATCH v5 11/12] [media] cxd2880: Add DVB-T2 monitor functions
` [PATCH v5 12/12] [media] cxd2880: Add all Makefile, Kconfig files and Update MAINTAINERS file for the driver


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).