[PATCH v4 0/7] PCI: Add support to the Cadence PCIe controller

[PATCH v4 0/7] PCI: Add support to the Cadence PCIe controller

[Cyrille Pitchen]

Hi all,

this series of patches adds support to the Cadence PCIe controller.
It was tested on a ARM64 platform emulated by a Palladium running the
pci-next kernel.

The host mode was tested with some PCIe devices connected to the Palladium
through a speed-bridge. Some of those devices were a USB host controller
and a SATA controller. The PCIe host controller was also tested with a
second controller configured in endpoint mode and connected back to back
to the first controller.

The EndPoint Controller (EPC) driver was removed only because I didn't
have time to take all Kishon's comments into account. However, using a
fixed patch based on patch 7 of the v2 series + another patch fixing
the EPF device name chosen by pci_epf_make(), I was abled to probe
both function 0 and function 1 of the of the 2nd Cadence PCIe controller
configured in endpoint mode (new hardware design since v2 so function 1
is now available).

Currently I'm facing 2 issues, which I didn't have enough time to
investigate and to fix yet:

1 - when the vendor:device IDs are set to 104c:b500 for both functions,
then I remove both devfn (echo 1 > /sys/bus/pci/devices/$BDF/remove)
before scanning the PCI bus again (echo 1 > /sys/bus/pci/rescan),
the PCI enumeration fails reporting that the PCI memory is exhausted.

2 - when I set the vendor:device IDs to 104c:0100 for function 0 and
104c:b500 and remove only function 1 before scanning the PCI bus again,
I now pass the PCI enumeration. I also pass the 'pcitest -b <BAR>' test
but I fail on the MSI test ('pcitest -m <MSI>').

I'm still investigating on those issues.

Best regards,

Cyrille

ChangeLog

v3 -> v4:
- split patch 3 from v3 into patches 3 and 4.
- remove unused cdns_pcie_reset_outbound_region() from old patch 6
  (new patch 7).
- other patches are unchanged.

v2 -> v3:

- rebase on today's linux-pci/next (20180110) 

patch1:
- rework the commit message of patch 1 and add two new comments on why endpoint
  library users must be linked after the endpoint library itself and why
  the dwc rule uses obj-y instead of obj-$(CONFIG_PCIE_CONFIG_DW).
- update patch 1 to add missing ifdef CONFIG_PCI / endif in
  drivers/pci/dwc/Makefile around the obj-$(CONFIG_ARM64) += pcie-hisi.o rule,
  like for the other obj-$(CONFIG_ARM64) rules in drivers/pci/host/Makefile.

patch2: unchanged

patch3:
- update patch 3 so the bridge hooks/members initialization is left to the
  host bridges probe routines.

patch4: unchanged

patch5:
- collect 'Reviewed-by' tag from Rob Herring for the DT bindings.

patch6:
- remove explanation in the commit message on why obj-$(CONFIG_PCIE_CANDENCE) is
  placed after obj-$(CONFIG_PCI_ENDPOINT) in drivers/pci/Makefile since a
  comment on it has been added into patch1.
- remove menuconfig PCI_CADENCE in drivers/pci/cadence/Kconfig to match
  drivers/pci/dwc/Kconfig.
- adapt patch6 to the changes done in patch3 for the pci_host_probe() function.

v1 -> v2:
- add new properties in the device-tree bindings: 'cdns,max-outbound-regions'
  and 'cdns,no-bar-match-nbits'.
- add a new patch to regroup all makefile rules in drivers/pci/Makefile, hence
  cleaning drivers/Makefile up.
- change the license text to use the recommanded format:
  // SPDX-License-Identifier: GPL-2.0
- add a new patch updating the API of the EPC library to add support to
  multi-function devices.
- add a 2 new patches to share more common code between host controller drivers
- remove some useless tests
- add more comments in both drivers.
- fix DT bindings examples
- remove useless init of the primary, secondary and sub-ordinate bus numbers in
  the PCI configuration space of the root port.
- remove cdns_pcie_ep_stop() function and rework cdns_pcie_ep_start() function

Cyrille Pitchen (6):
  PCI: Regroup all PCI related entries into drivers/pci/Makefile
  PCI: OF: Add generic function to parse and allocate PCI resources
  PCI: generic: fix missing call of pci_free_resource_list()
  PCI: Add generic function to probe PCI host controllers
  PCI: Add vendor ID for Cadence
  PCI: cadence: Add host driver for Cadence PCIe controller

Scott Telford (1):
  dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host
    controller

 .../bindings/pci/cdns,cdns-pcie-host.txt           |  60 ++++
 MAINTAINERS                                        |   7 +
 drivers/Makefile                                   |   5 +-
 drivers/pci/Kconfig                                |   2 +
 drivers/pci/Makefile                               |  14 +-
 drivers/pci/cadence/Kconfig                        |  16 +
 drivers/pci/cadence/Makefile                       |   3 +
 drivers/pci/cadence/pcie-cadence-host.c            | 336 +++++++++++++++++++++
 drivers/pci/cadence/pcie-cadence.c                 |  56 ++++
 drivers/pci/cadence/pcie-cadence.h                 | 194 ++++++++++++
 drivers/pci/dwc/Makefile                           |   2 +
 drivers/pci/host/Makefile                          |   2 +
 drivers/pci/host/pci-host-common.c                 |  72 +----
 drivers/pci/of.c                                   |  51 ++++
 drivers/pci/probe.c                                |  33 ++
 include/linux/pci.h                                |  10 +
 include/linux/pci_ids.h                            |   2 +
 17 files changed, 790 insertions(+), 75 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
 create mode 100644 drivers/pci/cadence/Kconfig
 create mode 100644 drivers/pci/cadence/Makefile
 create mode 100644 drivers/pci/cadence/pcie-cadence-host.c
 create mode 100644 drivers/pci/cadence/pcie-cadence.c
 create mode 100644 drivers/pci/cadence/pcie-cadence.h

-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 1/7] PCI: Regroup all PCI related entries into drivers/pci/Makefile

[Cyrille Pitchen]

Clean up drivers/Makefile by moving the pci/endpoint and pci/dwc entries
from drivers/Makefile into drivers/pci/Makefile.

Since we don't want to introduce any dependency between CONFIG_PCI and
CONFIG_PCI_ENDPOINT, we now always execute drivers/pci/Makefile.

Hence all Makefiles in drivers/pci/ were updated accordingly so no file is
compiled when CONFIG_PCI is not defined.

Also, we add a comment to reinforce that EPC and EPF libraries must be
initialized before their users. Hence built-in EPC drivers, such as
those of Designware, are linked after the endpoint core libraries.

Finally, we add another comment to explain why obj-y has been chosen
instead of obj-$(CONFIG_PCIE_DW) to parse the dwc/ sub-folder.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
 drivers/Makefile          |  5 +----
 drivers/pci/Kconfig       |  1 +
 drivers/pci/Makefile      | 13 ++++++++++---
 drivers/pci/dwc/Makefile  |  2 ++
 drivers/pci/host/Makefile |  2 ++
 5 files changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/Makefile b/drivers/Makefile
index e06f7f633f73..8189b1edec00 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -16,10 +16,7 @@ obj-$(CONFIG_PINCTRL)		+= pinctrl/
 obj-$(CONFIG_GPIOLIB)		+= gpio/
 obj-y				+= pwm/
 
-obj-$(CONFIG_PCI)		+= pci/
-obj-$(CONFIG_PCI_ENDPOINT)	+= pci/endpoint/
-# PCI dwc controller drivers
-obj-y				+= pci/dwc/
+obj-y				+= pci/
 
 obj-$(CONFIG_PARISC)		+= parisc/
 obj-$(CONFIG_RAPIDIO)		+= rapidio/
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index bda151788f3f..7eeb969ab86a 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -125,6 +125,7 @@ config PCI_PASID
 
 config PCI_LABEL
 	def_bool y if (DMI || ACPI)
+	depends on PCI
 	select NLS
 
 config PCI_HYPERV
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index c7819b973df7..ddb5aa6640d7 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -3,12 +3,15 @@
 # Makefile for the PCI bus specific drivers.
 #
 
-obj-y		+= access.o bus.o probe.o host-bridge.o remove.o pci.o \
+obj-$(CONFIG_PCI)	+= access.o bus.o probe.o host-bridge.o remove.o pci.o \
 			pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \
 			irq.o vpd.o setup-bus.o vc.o mmap.o setup-irq.o
 
+ifdef CONFIG_PCI
 obj-$(CONFIG_PROC_FS) += proc.o
 obj-$(CONFIG_SYSFS) += slot.o
+obj-$(CONFIG_OF) += of.o
+endif
 
 obj-$(CONFIG_PCI_QUIRKS) += quirks.o
 
@@ -44,10 +47,14 @@ obj-$(CONFIG_PCI_ECAM) += ecam.o
 
 obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o
 
-obj-$(CONFIG_OF) += of.o
-
 ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG
 
 # PCI host controller drivers
 obj-y += host/
 obj-y += switch/
+
+obj-$(CONFIG_PCI_ENDPOINT)	+= endpoint/
+
+# Endpoint library must be initialized before its users
+# pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
+obj-y				+= dwc/
diff --git a/drivers/pci/dwc/Makefile b/drivers/pci/dwc/Makefile
index a9d8a6fb48e3..5d2ce72c7a52 100644
--- a/drivers/pci/dwc/Makefile
+++ b/drivers/pci/dwc/Makefile
@@ -25,4 +25,6 @@ obj-$(CONFIG_PCIE_HISI_STB) += pcie-histb.o
 # ARM64 and use internal ifdefs to only build the pieces we need
 # depending on whether ACPI, the DT driver, or both are enabled.
 
+ifdef CONFIG_PCI
 obj-$(CONFIG_ARM64) += pcie-hisi.o
+endif
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index 34ec1d88f961..3b1059190867 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -34,6 +34,8 @@ obj-$(CONFIG_VMD) += vmd.o
 # ARM64 and use internal ifdefs to only build the pieces we need
 # depending on whether ACPI, the DT driver, or both are enabled.
 
+ifdef CONFIG_PCI
 obj-$(CONFIG_ARM64) += pci-thunder-ecam.o
 obj-$(CONFIG_ARM64) += pci-thunder-pem.o
 obj-$(CONFIG_ARM64) += pci-xgene.o
+endif
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 2/7] PCI: OF: Add generic function to parse and allocate PCI resources

[Cyrille Pitchen]

The patch moves the gen_pci_parse_request_of_pci_ranges() function from
drivers/pci/host/pci-host-common.c into drivers/pci/of.c to easily share
common source code between PCI host drivers.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
---
 drivers/pci/host/pci-host-common.c | 49 ++----------------------------------
 drivers/pci/of.c                   | 51 ++++++++++++++++++++++++++++++++++++++
 include/linux/pci.h                |  9 +++++++
 3 files changed, 62 insertions(+), 47 deletions(-)

diff --git a/drivers/pci/host/pci-host-common.c b/drivers/pci/host/pci-host-common.c
index c4b891c84703..a613ea310e76 100644
--- a/drivers/pci/host/pci-host-common.c
+++ b/drivers/pci/host/pci-host-common.c
@@ -24,50 +24,6 @@
 #include <linux/pci-ecam.h>
 #include <linux/platform_device.h>
 
-static int gen_pci_parse_request_of_pci_ranges(struct device *dev,
-		       struct list_head *resources, struct resource **bus_range)
-{
-	int err, res_valid = 0;
-	struct device_node *np = dev->of_node;
-	resource_size_t iobase;
-	struct resource_entry *win, *tmp;
-
-	err = of_pci_get_host_bridge_resources(np, 0, 0xff, resources, &iobase);
-	if (err)
-		return err;
-
-	err = devm_request_pci_bus_resources(dev, resources);
-	if (err)
-		return err;
-
-	resource_list_for_each_entry_safe(win, tmp, resources) {
-		struct resource *res = win->res;
-
-		switch (resource_type(res)) {
-		case IORESOURCE_IO:
-			err = pci_remap_iospace(res, iobase);
-			if (err) {
-				dev_warn(dev, "error %d: failed to map resource %pR\n",
-					 err, res);
-				resource_list_destroy_entry(win);
-			}
-			break;
-		case IORESOURCE_MEM:
-			res_valid |= !(res->flags & IORESOURCE_PREFETCH);
-			break;
-		case IORESOURCE_BUS:
-			*bus_range = res;
-			break;
-		}
-	}
-
-	if (res_valid)
-		return 0;
-
-	dev_err(dev, "non-prefetchable memory resource required\n");
-	return -EINVAL;
-}
-
 static void gen_pci_unmap_cfg(void *ptr)
 {
 	pci_ecam_free((struct pci_config_window *)ptr);
@@ -82,9 +38,9 @@ static struct pci_config_window *gen_pci_init(struct device *dev,
 	struct pci_config_window *cfg;
 
 	/* Parse our PCI ranges and request their resources */
-	err = gen_pci_parse_request_of_pci_ranges(dev, resources, &bus_range);
+	err = pci_parse_request_of_pci_ranges(dev, resources, &bus_range);
 	if (err)
-		goto err_out;
+		return ERR_PTR(err);
 
 	err = of_address_to_resource(dev->of_node, 0, &cfgres);
 	if (err) {
@@ -135,7 +91,6 @@ int pci_host_common_probe(struct platform_device *pdev,
 	of_pci_check_probe_only();
 
 	/* Parse and map our Configuration Space windows */
-	INIT_LIST_HEAD(&resources);
 	cfg = gen_pci_init(dev, &resources, ops);
 	if (IS_ERR(cfg))
 		return PTR_ERR(cfg);
diff --git a/drivers/pci/of.c b/drivers/pci/of.c
index e112da11630e..54e210501b73 100644
--- a/drivers/pci/of.c
+++ b/drivers/pci/of.c
@@ -88,3 +88,54 @@ struct irq_domain *pci_host_bridge_of_msi_domain(struct pci_bus *bus)
 	return NULL;
 #endif
 }
+
+int pci_parse_request_of_pci_ranges(struct device *dev,
+				    struct list_head *resources,
+				    struct resource **bus_range)
+{
+	int err, res_valid = 0;
+	struct device_node *np = dev->of_node;
+	resource_size_t iobase;
+	struct resource_entry *win, *tmp;
+
+	INIT_LIST_HEAD(resources);
+	err = of_pci_get_host_bridge_resources(np, 0, 0xff, resources, &iobase);
+	if (err)
+		return err;
+
+	err = devm_request_pci_bus_resources(dev, resources);
+	if (err)
+		goto out_release_res;
+
+	resource_list_for_each_entry_safe(win, tmp, resources) {
+		struct resource *res = win->res;
+
+		switch (resource_type(res)) {
+		case IORESOURCE_IO:
+			err = pci_remap_iospace(res, iobase);
+			if (err) {
+				dev_warn(dev, "error %d: failed to map resource %pR\n",
+					 err, res);
+				resource_list_destroy_entry(win);
+			}
+			break;
+		case IORESOURCE_MEM:
+			res_valid |= !(res->flags & IORESOURCE_PREFETCH);
+			break;
+		case IORESOURCE_BUS:
+			if (bus_range)
+				*bus_range = res;
+			break;
+		}
+	}
+
+	if (res_valid)
+		return 0;
+
+	dev_err(dev, "non-prefetchable memory resource required\n");
+	err = -EINVAL;
+
+ out_release_res:
+	pci_free_resource_list(resources);
+	return err;
+}
diff --git a/include/linux/pci.h b/include/linux/pci.h
index e0ec63e1c7d4..4a4cbd444e1e 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -2163,6 +2163,9 @@ void pci_release_of_node(struct pci_dev *dev);
 void pci_set_bus_of_node(struct pci_bus *bus);
 void pci_release_bus_of_node(struct pci_bus *bus);
 struct irq_domain *pci_host_bridge_of_msi_domain(struct pci_bus *bus);
+int pci_parse_request_of_pci_ranges(struct device *dev,
+				    struct list_head *resources,
+				    struct resource **bus_range);
 
 /* Arch may override this (weak) */
 struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus);
@@ -2187,6 +2190,12 @@ static inline struct device_node *
 pci_device_to_OF_node(const struct pci_dev *pdev) { return NULL; }
 static inline struct irq_domain *
 pci_host_bridge_of_msi_domain(struct pci_bus *bus) { return NULL; }
+static inline int pci_parse_request_of_pci_ranges(struct device *dev,
+						  struct list_head *resources,
+						  struct resource **bus_range)
+{
+	return -EINVAL;
+}
 #endif	/* CONFIG_OF */
 
 #ifdef CONFIG_ACPI
-- 
2.11.0

[PATCH v4 3/7] PCI: generic: fix missing call of pci_free_resource_list()

[Cyrille Pitchen]

Call pci_free_resource_list() from pci_host_common_probe() when probing
fails, as done inside gen_pci_init() when this later function fails.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
---
 drivers/pci/host/pci-host-common.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pci/host/pci-host-common.c b/drivers/pci/host/pci-host-common.c
index a613ea310e76..9f27e90f578c 100644
--- a/drivers/pci/host/pci-host-common.c
+++ b/drivers/pci/host/pci-host-common.c
@@ -110,6 +110,7 @@ int pci_host_common_probe(struct platform_device *pdev,
 	ret = pci_scan_root_bus_bridge(bridge);
 	if (ret < 0) {
 		dev_err(dev, "Scanning root bridge failed");
+		pci_free_resource_list(&resources);
 		return ret;
 	}
 
-- 
2.11.0

[PATCH v4 4/7] PCI: Add generic function to probe PCI host controllers

[Cyrille Pitchen]

This patchs moves generic source code from
drivers/pci/host/pci-host-common.c into drivers/pci/probe.c.

Indeed the extracted lines of code were duplicated by many host
controller drivers. Regrouping them into a generic function gives a
change to properly share this code without introducing a useless
dependency to PCI_HOST_COMMON, which selects PCI_ECAM when not needed by
most host controller drivers.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
---
 drivers/pci/host/pci-host-common.c | 22 +---------------------
 drivers/pci/probe.c                | 33 +++++++++++++++++++++++++++++++++
 include/linux/pci.h                |  1 +
 3 files changed, 35 insertions(+), 21 deletions(-)

diff --git a/drivers/pci/host/pci-host-common.c b/drivers/pci/host/pci-host-common.c
index 9f27e90f578c..756702d8dd10 100644
--- a/drivers/pci/host/pci-host-common.c
+++ b/drivers/pci/host/pci-host-common.c
@@ -72,7 +72,6 @@ int pci_host_common_probe(struct platform_device *pdev,
 	const char *type;
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
-	struct pci_bus *bus, *child;
 	struct pci_host_bridge *bridge;
 	struct pci_config_window *cfg;
 	struct list_head resources;
@@ -107,30 +106,11 @@ int pci_host_common_probe(struct platform_device *pdev,
 	bridge->map_irq = of_irq_parse_and_map_pci;
 	bridge->swizzle_irq = pci_common_swizzle;
 
-	ret = pci_scan_root_bus_bridge(bridge);
+	ret = pci_host_probe(bridge);
 	if (ret < 0) {
-		dev_err(dev, "Scanning root bridge failed");
 		pci_free_resource_list(&resources);
 		return ret;
 	}
 
-	bus = bridge->bus;
-
-	/*
-	 * We insert PCI resources into the iomem_resource and
-	 * ioport_resource trees in either pci_bus_claim_resources()
-	 * or pci_bus_assign_resources().
-	 */
-	if (pci_has_flag(PCI_PROBE_ONLY)) {
-		pci_bus_claim_resources(bus);
-	} else {
-		pci_bus_size_bridges(bus);
-		pci_bus_assign_resources(bus);
-
-		list_for_each_entry(child, &bus->children, node)
-			pcie_bus_configure_settings(child);
-	}
-
-	pci_bus_add_devices(bus);
 	return 0;
 }
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 1360db508035..178328d06a32 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -2685,6 +2685,39 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
 }
 EXPORT_SYMBOL_GPL(pci_create_root_bus);
 
+int pci_host_probe(struct pci_host_bridge *bridge)
+{
+	struct pci_bus *bus, *child;
+	int ret;
+
+	ret = pci_scan_root_bus_bridge(bridge);
+	if (ret < 0) {
+		dev_err(bridge->dev.parent, "Scanning root bridge failed");
+		return ret;
+	}
+
+	bus = bridge->bus;
+
+	/*
+	 * We insert PCI resources into the iomem_resource and
+	 * ioport_resource trees in either pci_bus_claim_resources()
+	 * or pci_bus_assign_resources().
+	 */
+	if (pci_has_flag(PCI_PROBE_ONLY)) {
+		pci_bus_claim_resources(bus);
+	} else {
+		pci_bus_size_bridges(bus);
+		pci_bus_assign_resources(bus);
+
+		list_for_each_entry(child, &bus->children, node)
+			pcie_bus_configure_settings(child);
+	}
+
+	pci_bus_add_devices(bus);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pci_host_probe);
+
 int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int bus_max)
 {
 	struct resource *res = &b->busn_res;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 4a4cbd444e1e..83514b34742a 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -879,6 +879,7 @@ struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops, void *sysdata);
 struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
 				    struct pci_ops *ops, void *sysdata,
 				    struct list_head *resources);
+int pci_host_probe(struct pci_host_bridge *bridge);
 int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int busmax);
 int pci_bus_update_busn_res_end(struct pci_bus *b, int busmax);
 void pci_bus_release_busn_res(struct pci_bus *b);
-- 
2.11.0

[PATCH v4 5/7] PCI: Add vendor ID for Cadence

[Cyrille Pitchen]

This patch adds a new PCI vendor ID for Cadence.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
---
 include/linux/pci_ids.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index ab20dc5db423..eb13e84e1fef 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2381,6 +2381,8 @@
 
 #define PCI_VENDOR_ID_LENOVO		0x17aa
 
+#define PCI_VENDOR_ID_CDNS		0x17cd
+
 #define PCI_VENDOR_ID_ARECA		0x17d3
 #define PCI_DEVICE_ID_ARECA_1110	0x1110
 #define PCI_DEVICE_ID_ARECA_1120	0x1120
-- 
2.11.0

[PATCH v4 6/7] dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller

[Cyrille Pitchen]

From: Scott Telford <stelford@cadence.com>

This patch adds documentation for the DT bindings of the Cadence PCIe
controller when configured in host (Root Complex) mode.

Signed-off-by: Scott Telford <stelford@cadence.com>
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/pci/cdns,cdns-pcie-host.txt           | 60 ++++++++++++++++++++++
 1 file changed, 60 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt

diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
new file mode 100644
index 000000000000..20a33f38f69d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
@@ -0,0 +1,60 @@
+* Cadence PCIe host controller
+
+This PCIe controller inherits the base properties defined in
+host-generic-pci.txt.
+
+Required properties:
+- compatible: Should contain "cdns,cdns-pcie-host" to identify the IP used.
+- reg: Should contain the controller register base address, PCIe configuration
+  window base address, and AXI interface region base address respectively.
+- reg-names: Must be "reg", "cfg" and "mem" respectively.
+- #address-cells: Set to <3>
+- #size-cells: Set to <2>
+- device_type: Set to "pci"
+- ranges: Ranges for the PCI memory and I/O regions
+- #interrupt-cells: Set to <1>
+- interrupt-map-mask and interrupt-map: Standard PCI properties to define the
+  mapping of the PCIe interface to interrupt numbers.
+
+Optional properties:
+- cdns,max-outbound-regions: Set to maximum number of outbound regions
+  (default 32)
+- cdns,no-bar-match-nbits: Set into the no BAR match register to configure the
+  number of least significant bits kept during inbound (PCIe -> AXI) address
+  translations (default 32)
+- vendor-id: The PCI vendor ID (16 bits, default is design dependent)
+- device-id: The PCI device ID (16 bits, default is design dependent)
+
+Example:
+
+pcie@fb000000 {
+	compatible = "cdns,cdns-pcie-host";
+	device_type = "pci";
+	#address-cells = <3>;
+	#size-cells = <2>;
+	bus-range = <0x0 0xff>;
+	linux,pci-domain = <0>;
+	cdns,max-outbound-regions = <16>;
+	cdns,no-bar-match-nbits = <32>;
+	vendor-id = /bits/ 16 <0x17cd>;
+	device-id = /bits/ 16 <0x0200>;
+
+	reg = <0x0 0xfb000000  0x0 0x01000000>,
+	      <0x0 0x41000000  0x0 0x00001000>,
+	      <0x0 0x40000000  0x0 0x04000000>;
+	reg-names = "reg", "cfg", "mem";
+
+	ranges = <0x02000000 0x0 0x42000000  0x0 0x42000000  0x0 0x1000000>,
+		 <0x01000000 0x0 0x43000000  0x0 0x43000000  0x0 0x0010000>;
+
+	#interrupt-cells = <0x1>;
+
+	interrupt-map = <0x0 0x0 0x0  0x1  &gic  0x0 0x0 0x0 14 0x1
+			 0x0 0x0 0x0  0x2  &gic  0x0 0x0 0x0 15 0x1
+			 0x0 0x0 0x0  0x3  &gic  0x0 0x0 0x0 16 0x1
+			 0x0 0x0 0x0  0x4  &gic  0x0 0x0 0x0 17 0x1>;
+
+	interrupt-map-mask = <0x0 0x0 0x0  0x7>;
+
+	msi-parent = <&its_pci>;
+};
-- 
2.11.0

[PATCH v4 7/7] PCI: cadence: Add host driver for Cadence PCIe controller

[Cyrille Pitchen]

This patch adds support to the Cadence PCIe controller in host mode.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
---
 MAINTAINERS                             |   7 +
 drivers/pci/Kconfig                     |   1 +
 drivers/pci/Makefile                    |   1 +
 drivers/pci/cadence/Kconfig             |  16 ++
 drivers/pci/cadence/Makefile            |   3 +
 drivers/pci/cadence/pcie-cadence-host.c | 336 ++++++++++++++++++++++++++++++++
 drivers/pci/cadence/pcie-cadence.c      |  56 ++++++
 drivers/pci/cadence/pcie-cadence.h      | 194 ++++++++++++++++++
 8 files changed, 614 insertions(+)
 create mode 100644 drivers/pci/cadence/Kconfig
 create mode 100644 drivers/pci/cadence/Makefile
 create mode 100644 drivers/pci/cadence/pcie-cadence-host.c
 create mode 100644 drivers/pci/cadence/pcie-cadence.c
 create mode 100644 drivers/pci/cadence/pcie-cadence.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 13945646b95d..cc24c74a946e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10402,6 +10402,13 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/pci/pci-armada8k.txt
 F:	drivers/pci/dwc/pcie-armada8k.c
 
+PCI DRIVER FOR CADENCE PCIE IP
+M:	Alan Douglas <adouglas@cadence.com>
+L:	linux-pci@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/pci/cdns,*.txt
+F:	drivers/pci/cadence/pcie-cadence*
+
 PCI DRIVER FOR FREESCALE LAYERSCAPE
 M:	Minghuan Lian <minghuan.Lian@freescale.com>
 M:	Mingkai Hu <mingkai.hu@freescale.com>
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 7eeb969ab86a..dee90cc1dcaf 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -136,6 +136,7 @@ config PCI_HYPERV
           PCI devices from a PCI backend to support PCI driver domains.
 
 source "drivers/pci/hotplug/Kconfig"
+source "drivers/pci/cadence/Kconfig"
 source "drivers/pci/dwc/Kconfig"
 source "drivers/pci/host/Kconfig"
 source "drivers/pci/endpoint/Kconfig"
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index ddb5aa6640d7..941970936840 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -56,5 +56,6 @@ obj-y += switch/
 obj-$(CONFIG_PCI_ENDPOINT)	+= endpoint/
 
 # Endpoint library must be initialized before its users
+obj-$(CONFIG_PCIE_CADENCE)	+= cadence/
 # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
 obj-y				+= dwc/
diff --git a/drivers/pci/cadence/Kconfig b/drivers/pci/cadence/Kconfig
new file mode 100644
index 000000000000..0123d384a628
--- /dev/null
+++ b/drivers/pci/cadence/Kconfig
@@ -0,0 +1,16 @@
+menu "Cadence PCIe controllers support"
+
+config PCIE_CADENCE
+	bool
+
+config PCIE_CADENCE_HOST
+	bool "Cadence PCIe host controller"
+	depends on OF
+	select IRQ_DOMAIN
+	select PCIE_CADENCE
+	help
+	  Say Y here if you want to support the Cadence PCIe controller in host
+	  mode. This PCIe controller may be embedded into many different vendors
+	  SoCs.
+
+endmenu
diff --git a/drivers/pci/cadence/Makefile b/drivers/pci/cadence/Makefile
new file mode 100644
index 000000000000..589601a8ff89
--- /dev/null
+++ b/drivers/pci/cadence/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PCIE_CADENCE) += pcie-cadence.o
+obj-$(CONFIG_PCIE_CADENCE_HOST) += pcie-cadence-host.o
diff --git a/drivers/pci/cadence/pcie-cadence-host.c b/drivers/pci/cadence/pcie-cadence-host.c
new file mode 100644
index 000000000000..26caf8963e3c
--- /dev/null
+++ b/drivers/pci/cadence/pcie-cadence-host.c
@@ -0,0 +1,336 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017 Cadence
+// Cadence PCIe host controller driver.
+// Author: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
+
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#include "pcie-cadence.h"
+
+/**
+ * struct cdns_pcie_rc - private data for this PCIe Root Complex driver
+ * @pcie: Cadence PCIe controller
+ * @dev: pointer to PCIe device
+ * @cfg_res: start/end offsets in the physical system memory to map PCI
+ *           configuration space accesses
+ * @bus_range: first/last buses behind the PCIe host controller
+ * @cfg_base: IO mapped window to access the PCI configuration space of a
+ *            single function at a time
+ * @max_regions: maximum number of regions supported by the hardware
+ * @no_bar_nbits: Number of bits to keep for inbound (PCIe -> CPU) address
+ *                translation (nbits sets into the "no BAR match" register)
+ * @vendor_id: PCI vendor ID
+ * @device_id: PCI device ID
+ */
+struct cdns_pcie_rc {
+	struct cdns_pcie	pcie;
+	struct device		*dev;
+	struct resource		*cfg_res;
+	struct resource		*bus_range;
+	void __iomem		*cfg_base;
+	u32			max_regions;
+	u32			no_bar_nbits;
+	u16			vendor_id;
+	u16			device_id;
+};
+
+static void __iomem *cdns_pci_map_bus(struct pci_bus *bus, unsigned int devfn,
+				      int where)
+{
+	struct pci_host_bridge *bridge = pci_find_host_bridge(bus);
+	struct cdns_pcie_rc *rc = pci_host_bridge_priv(bridge);
+	struct cdns_pcie *pcie = &rc->pcie;
+	unsigned int busn = bus->number;
+	u32 addr0, desc0;
+
+	if (busn == rc->bus_range->start) {
+		/*
+		 * Only the root port (devfn == 0) is connected to this bus.
+		 * All other PCI devices are behind some bridge hence on another
+		 * bus.
+		 */
+		if (devfn)
+			return NULL;
+
+		return pcie->reg_base + (where & 0xfff);
+	}
+
+	/* Update Output registers for AXI region 0. */
+	addr0 = CDNS_PCIE_AT_OB_REGION_PCI_ADDR0_NBITS(12) |
+		CDNS_PCIE_AT_OB_REGION_PCI_ADDR0_DEVFN(devfn) |
+		CDNS_PCIE_AT_OB_REGION_PCI_ADDR0_BUS(busn);
+	cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_PCI_ADDR0(0), addr0);
+
+	/* Configuration Type 0 or Type 1 access. */
+	desc0 = CDNS_PCIE_AT_OB_REGION_DESC0_HARDCODED_RID |
+		CDNS_PCIE_AT_OB_REGION_DESC0_DEVFN(0);
+	/*
+	 * The bus number was already set once for all in desc1 by
+	 * cdns_pcie_host_init_address_translation().
+	 */
+	if (busn == rc->bus_range->start + 1)
+		desc0 |= CDNS_PCIE_AT_OB_REGION_DESC0_TYPE_CONF_TYPE0;
+	else
+		desc0 |= CDNS_PCIE_AT_OB_REGION_DESC0_TYPE_CONF_TYPE1;
+	cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_DESC0(0), desc0);
+
+	return rc->cfg_base + (where & 0xfff);
+}
+
+static struct pci_ops cdns_pcie_host_ops = {
+	.map_bus	= cdns_pci_map_bus,
+	.read		= pci_generic_config_read,
+	.write		= pci_generic_config_write,
+};
+
+static const struct of_device_id cdns_pcie_host_of_match[] = {
+	{ .compatible = "cdns,cdns-pcie-host" },
+
+	{ },
+};
+
+static int cdns_pcie_host_init_root_port(struct cdns_pcie_rc *rc)
+{
+	struct cdns_pcie *pcie = &rc->pcie;
+	u32 value, ctrl;
+
+	/*
+	 * Set the root complex BAR configuration register:
+	 * - disable both BAR0 and BAR1.
+	 * - enable Prefetchable Memory Base and Limit registers in type 1
+	 *   config space (64 bits).
+	 * - enable IO Base and Limit registers in type 1 config
+	 *   space (32 bits).
+	 */
+	ctrl = CDNS_PCIE_LM_BAR_CFG_CTRL_DISABLED;
+	value = CDNS_PCIE_LM_RC_BAR_CFG_BAR0_CTRL(ctrl) |
+		CDNS_PCIE_LM_RC_BAR_CFG_BAR1_CTRL(ctrl) |
+		CDNS_PCIE_LM_RC_BAR_CFG_PREFETCH_MEM_ENABLE |
+		CDNS_PCIE_LM_RC_BAR_CFG_PREFETCH_MEM_64BITS |
+		CDNS_PCIE_LM_RC_BAR_CFG_IO_ENABLE |
+		CDNS_PCIE_LM_RC_BAR_CFG_IO_32BITS;
+	cdns_pcie_writel(pcie, CDNS_PCIE_LM_RC_BAR_CFG, value);
+
+	/* Set root port configuration space */
+	if (rc->vendor_id != 0xffff)
+		cdns_pcie_rp_writew(pcie, PCI_VENDOR_ID, rc->vendor_id);
+	if (rc->device_id != 0xffff)
+		cdns_pcie_rp_writew(pcie, PCI_DEVICE_ID, rc->device_id);
+
+	cdns_pcie_rp_writeb(pcie, PCI_CLASS_REVISION, 0);
+	cdns_pcie_rp_writeb(pcie, PCI_CLASS_PROG, 0);
+	cdns_pcie_rp_writew(pcie, PCI_CLASS_DEVICE, PCI_CLASS_BRIDGE_PCI);
+
+	return 0;
+}
+
+static int cdns_pcie_host_init_address_translation(struct cdns_pcie_rc *rc)
+{
+	struct cdns_pcie *pcie = &rc->pcie;
+	struct resource *cfg_res = rc->cfg_res;
+	struct resource *mem_res = pcie->mem_res;
+	struct resource *bus_range = rc->bus_range;
+	struct device *dev = rc->dev;
+	struct device_node *np = dev->of_node;
+	struct of_pci_range_parser parser;
+	struct of_pci_range range;
+	u32 addr0, addr1, desc1;
+	u64 cpu_addr;
+	int r, err;
+
+	/*
+	 * Reserve region 0 for PCI configure space accesses:
+	 * OB_REGION_PCI_ADDR0 and OB_REGION_DESC0 are updated dynamically by
+	 * cdns_pci_map_bus(), other region registers are set here once for all.
+	 */
+	addr1 = 0; /* Should be programmed to zero. */
+	desc1 = CDNS_PCIE_AT_OB_REGION_DESC1_BUS(bus_range->start);
+	cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_PCI_ADDR1(0), addr1);
+	cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_DESC1(0), desc1);
+
+	cpu_addr = cfg_res->start - mem_res->start;
+	addr0 = CDNS_PCIE_AT_OB_REGION_CPU_ADDR0_NBITS(12) |
+		(lower_32_bits(cpu_addr) & GENMASK(31, 8));
+	addr1 = upper_32_bits(cpu_addr);
+	cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_CPU_ADDR0(0), addr0);
+	cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_CPU_ADDR1(0), addr1);
+
+	err = of_pci_range_parser_init(&parser, np);
+	if (err)
+		return err;
+
+	r = 1;
+	for_each_of_pci_range(&parser, &range) {
+		bool is_io;
+
+		if (r >= rc->max_regions)
+			break;
+
+		if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_MEM)
+			is_io = false;
+		else if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_IO)
+			is_io = true;
+		else
+			continue;
+
+		cdns_pcie_set_outbound_region(pcie, r, is_io,
+					      range.cpu_addr,
+					      range.pci_addr,
+					      range.size);
+		r++;
+	}
+
+	/*
+	 * Set Root Port no BAR match Inbound Translation registers:
+	 * needed for MSI and DMA.
+	 * Root Port BAR0 and BAR1 are disabled, hence no need to set their
+	 * inbound translation registers.
+	 */
+	addr0 = CDNS_PCIE_AT_IB_RP_BAR_ADDR0_NBITS(rc->no_bar_nbits);
+	addr1 = 0;
+	cdns_pcie_writel(pcie, CDNS_PCIE_AT_IB_RP_BAR_ADDR0(RP_NO_BAR), addr0);
+	cdns_pcie_writel(pcie, CDNS_PCIE_AT_IB_RP_BAR_ADDR1(RP_NO_BAR), addr1);
+
+	return 0;
+}
+
+static int cdns_pcie_host_init(struct device *dev,
+			       struct list_head *resources,
+			       struct cdns_pcie_rc *rc)
+{
+	struct resource *bus_range = NULL;
+	int err;
+
+	/* Parse our PCI ranges and request their resources */
+	err = pci_parse_request_of_pci_ranges(dev, resources, &bus_range);
+	if (err)
+		return err;
+
+	rc->bus_range = bus_range;
+	rc->pcie.bus = bus_range->start;
+
+	err = cdns_pcie_host_init_root_port(rc);
+	if (err)
+		goto err_out;
+
+	err = cdns_pcie_host_init_address_translation(rc);
+	if (err)
+		goto err_out;
+
+	return 0;
+
+ err_out:
+	pci_free_resource_list(resources);
+	return err;
+}
+
+static int cdns_pcie_host_probe(struct platform_device *pdev)
+{
+	const char *type;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct pci_host_bridge *bridge;
+	struct list_head resources;
+	struct cdns_pcie_rc *rc;
+	struct cdns_pcie *pcie;
+	struct resource *res;
+	int ret;
+
+	bridge = devm_pci_alloc_host_bridge(dev, sizeof(*rc));
+	if (!bridge)
+		return -ENOMEM;
+
+	rc = pci_host_bridge_priv(bridge);
+	rc->dev = dev;
+
+	pcie = &rc->pcie;
+	pcie->is_rc = true;
+
+	rc->max_regions = 32;
+	of_property_read_u32(np, "cdns,max-outbound-regions", &rc->max_regions);
+
+	rc->no_bar_nbits = 32;
+	of_property_read_u32(np, "cdns,no-bar-match-nbits", &rc->no_bar_nbits);
+
+	rc->vendor_id = 0xffff;
+	of_property_read_u16(np, "vendor-id", &rc->vendor_id);
+
+	rc->device_id = 0xffff;
+	of_property_read_u16(np, "device-id", &rc->device_id);
+
+	type = of_get_property(np, "device_type", NULL);
+	if (!type || strcmp(type, "pci")) {
+		dev_err(dev, "invalid \"device_type\" %s\n", type);
+		return -EINVAL;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "reg");
+	pcie->reg_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(pcie->reg_base)) {
+		dev_err(dev, "missing \"reg\"\n");
+		return PTR_ERR(pcie->reg_base);
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
+	rc->cfg_base = devm_pci_remap_cfg_resource(dev, res);
+	if (IS_ERR(rc->cfg_base)) {
+		dev_err(dev, "missing \"cfg\"\n");
+		return PTR_ERR(rc->cfg_base);
+	}
+	rc->cfg_res = res;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem");
+	if (!res) {
+		dev_err(dev, "missing \"mem\"\n");
+		return -EINVAL;
+	}
+	pcie->mem_res = res;
+
+	pm_runtime_enable(dev);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		dev_err(dev, "pm_runtime_get_sync() failed\n");
+		goto err_get_sync;
+	}
+
+	ret = cdns_pcie_host_init(dev, &resources, rc);
+	if (ret)
+		goto err_init;
+
+	list_splice_init(&resources, &bridge->windows);
+	bridge->dev.parent = dev;
+	bridge->busnr = pcie->bus;
+	bridge->ops = &cdns_pcie_host_ops;
+	bridge->map_irq = of_irq_parse_and_map_pci;
+	bridge->swizzle_irq = pci_common_swizzle;
+
+	ret = pci_host_probe(bridge);
+	if (ret < 0)
+		goto err_host_probe;
+
+	return 0;
+
+ err_host_probe:
+	pci_free_resource_list(&resources);
+
+ err_init:
+	pm_runtime_put_sync(dev);
+
+ err_get_sync:
+	pm_runtime_disable(dev);
+
+	return ret;
+}
+
+static struct platform_driver cdns_pcie_host_driver = {
+	.driver = {
+		.name = "cdns-pcie-host",
+		.of_match_table = cdns_pcie_host_of_match,
+	},
+	.probe = cdns_pcie_host_probe,
+};
+builtin_platform_driver(cdns_pcie_host_driver);
diff --git a/drivers/pci/cadence/pcie-cadence.c b/drivers/pci/cadence/pcie-cadence.c
new file mode 100644
index 000000000000..0c8317fedfa7
--- /dev/null
+++ b/drivers/pci/cadence/pcie-cadence.c
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017 Cadence
+// Cadence PCIe controller driver.
+// Author: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
+
+#include <linux/kernel.h>
+
+#include "pcie-cadence.h"
+
+void cdns_pcie_set_outbound_region(struct cdns_pcie *pcie, u32 r, bool is_io,
+				   u64 cpu_addr, u64 pci_addr, size_t size)
+{
+	/*
+	 * roundup_pow_of_two() returns an unsigned long, which is not suited
+	 * for 64bit values.
+	 */
+	u64 sz = 1ULL << fls64(size - 1);
+	int nbits = ilog2(sz);
+	u32 addr0, addr1, desc0, desc1;
+
+	if (nbits < 8)
+		nbits = 8;
+
+	/* Set the PCI address */
+	addr0 = CDNS_PCIE_AT_OB_REGION_PCI_ADDR0_NBITS(nbits) |
+		(lower_32_bits(pci_addr) & GENMASK(31, 8));
+	addr1 = upper_32_bits(pci_addr);
+
+	cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_PCI_ADDR0(r), addr0);
+	cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_PCI_ADDR1(r), addr1);
+
+	/* Set the PCIe header descriptor */
+	if (is_io)
+		desc0 = CDNS_PCIE_AT_OB_REGION_DESC0_TYPE_IO;
+	else
+		desc0 = CDNS_PCIE_AT_OB_REGION_DESC0_TYPE_MEM;
+	desc1 = 0;
+
+	if (pcie->is_rc) {
+		desc0 |= CDNS_PCIE_AT_OB_REGION_DESC0_HARDCODED_RID |
+			 CDNS_PCIE_AT_OB_REGION_DESC0_DEVFN(0);
+		desc1 |= CDNS_PCIE_AT_OB_REGION_DESC1_BUS(pcie->bus);
+	}
+
+	cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_DESC0(r), desc0);
+	cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_DESC1(r), desc1);
+
+	/* Set the CPU address */
+	cpu_addr -= pcie->mem_res->start;
+	addr0 = CDNS_PCIE_AT_OB_REGION_CPU_ADDR0_NBITS(nbits) |
+		(lower_32_bits(cpu_addr) & GENMASK(31, 8));
+	addr1 = upper_32_bits(cpu_addr);
+
+	cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_CPU_ADDR0(r), addr0);
+	cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_CPU_ADDR1(r), addr1);
+}
diff --git a/drivers/pci/cadence/pcie-cadence.h b/drivers/pci/cadence/pcie-cadence.h
new file mode 100644
index 000000000000..afd2d4f5c5ea
--- /dev/null
+++ b/drivers/pci/cadence/pcie-cadence.h
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017 Cadence
+// Cadence PCIe controller driver.
+// Author: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
+
+#ifndef _PCIE_CADENCE_H
+#define _PCIE_CADENCE_H
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+
+/*
+ * Local Management Registers
+ */
+#define CDNS_PCIE_LM_BASE	0x00100000
+
+/* Vendor ID Register */
+#define CDNS_PCIE_LM_ID		(CDNS_PCIE_LM_BASE + 0x0044)
+#define  CDNS_PCIE_LM_ID_VENDOR_MASK	GENMASK(15, 0)
+#define  CDNS_PCIE_LM_ID_VENDOR_SHIFT	0
+#define  CDNS_PCIE_LM_ID_VENDOR(vid) \
+	(((vid) << CDNS_PCIE_LM_ID_VENDOR_SHIFT) & CDNS_PCIE_LM_ID_VENDOR_MASK)
+#define  CDNS_PCIE_LM_ID_SUBSYS_MASK	GENMASK(31, 16)
+#define  CDNS_PCIE_LM_ID_SUBSYS_SHIFT	16
+#define  CDNS_PCIE_LM_ID_SUBSYS(sub) \
+	(((sub) << CDNS_PCIE_LM_ID_SUBSYS_SHIFT) & CDNS_PCIE_LM_ID_SUBSYS_MASK)
+
+/* Root Port Requestor ID Register */
+#define CDNS_PCIE_LM_RP_RID	(CDNS_PCIE_LM_BASE + 0x0228)
+#define  CDNS_PCIE_LM_RP_RID_MASK	GENMASK(15, 0)
+#define  CDNS_PCIE_LM_RP_RID_SHIFT	0
+#define  CDNS_PCIE_LM_RP_RID_(rid) \
+	(((rid) << CDNS_PCIE_LM_RP_RID_SHIFT) & CDNS_PCIE_LM_RP_RID_MASK)
+
+/* Root Complex BAR Configuration Register */
+#define CDNS_PCIE_LM_RC_BAR_CFG	(CDNS_PCIE_LM_BASE + 0x0300)
+#define  CDNS_PCIE_LM_RC_BAR_CFG_BAR0_APERTURE_MASK	GENMASK(5, 0)
+#define  CDNS_PCIE_LM_RC_BAR_CFG_BAR0_APERTURE(a) \
+	(((a) << 0) & CDNS_PCIE_LM_RC_BAR_CFG_BAR0_APERTURE_MASK)
+#define  CDNS_PCIE_LM_RC_BAR_CFG_BAR0_CTRL_MASK		GENMASK(8, 6)
+#define  CDNS_PCIE_LM_RC_BAR_CFG_BAR0_CTRL(c) \
+	(((c) << 6) & CDNS_PCIE_LM_RC_BAR_CFG_BAR0_CTRL_MASK)
+#define  CDNS_PCIE_LM_RC_BAR_CFG_BAR1_APERTURE_MASK	GENMASK(13, 9)
+#define  CDNS_PCIE_LM_RC_BAR_CFG_BAR1_APERTURE(a) \
+	(((a) << 9) & CDNS_PCIE_LM_RC_BAR_CFG_BAR1_APERTURE_MASK)
+#define  CDNS_PCIE_LM_RC_BAR_CFG_BAR1_CTRL_MASK		GENMASK(16, 14)
+#define  CDNS_PCIE_LM_RC_BAR_CFG_BAR1_CTRL(c) \
+	(((c) << 14) & CDNS_PCIE_LM_RC_BAR_CFG_BAR1_CTRL_MASK)
+#define  CDNS_PCIE_LM_RC_BAR_CFG_PREFETCH_MEM_ENABLE	BIT(17)
+#define  CDNS_PCIE_LM_RC_BAR_CFG_PREFETCH_MEM_32BITS	0
+#define  CDNS_PCIE_LM_RC_BAR_CFG_PREFETCH_MEM_64BITS	BIT(18)
+#define  CDNS_PCIE_LM_RC_BAR_CFG_IO_ENABLE		BIT(19)
+#define  CDNS_PCIE_LM_RC_BAR_CFG_IO_16BITS		0
+#define  CDNS_PCIE_LM_RC_BAR_CFG_IO_32BITS		BIT(20)
+#define  CDNS_PCIE_LM_RC_BAR_CFG_CHECK_ENABLE		BIT(31)
+
+/* BAR control values applicable to both Endpoint Function and Root Complex */
+#define  CDNS_PCIE_LM_BAR_CFG_CTRL_DISABLED		0x0
+#define  CDNS_PCIE_LM_BAR_CFG_CTRL_IO_32BITS		0x1
+#define  CDNS_PCIE_LM_BAR_CFG_CTRL_MEM_32BITS		0x4
+#define  CDNS_PCIE_LM_BAR_CFG_CTRL_PREFETCH_MEM_32BITS	0x5
+#define  CDNS_PCIE_LM_BAR_CFG_CTRL_MEM_64BITS		0x6
+#define  CDNS_PCIE_LM_BAR_CFG_CTRL_PREFETCH_MEM_64BITS	0x7
+
+
+/*
+ * Root Port Registers (PCI configuration space for the root port function)
+ */
+#define CDNS_PCIE_RP_BASE	0x00200000
+
+
+/*
+ * Address Translation Registers
+ */
+#define CDNS_PCIE_AT_BASE	0x00400000
+
+/* Region r Outbound AXI to PCIe Address Translation Register 0 */
+#define CDNS_PCIE_AT_OB_REGION_PCI_ADDR0(r) \
+	(CDNS_PCIE_AT_BASE + 0x0000 + ((r) & 0x1f) * 0x0020)
+#define  CDNS_PCIE_AT_OB_REGION_PCI_ADDR0_NBITS_MASK	GENMASK(5, 0)
+#define  CDNS_PCIE_AT_OB_REGION_PCI_ADDR0_NBITS(nbits) \
+	(((nbits) - 1) & CDNS_PCIE_AT_OB_REGION_PCI_ADDR0_NBITS_MASK)
+#define  CDNS_PCIE_AT_OB_REGION_PCI_ADDR0_DEVFN_MASK	GENMASK(19, 12)
+#define  CDNS_PCIE_AT_OB_REGION_PCI_ADDR0_DEVFN(devfn) \
+	(((devfn) << 12) & CDNS_PCIE_AT_OB_REGION_PCI_ADDR0_DEVFN_MASK)
+#define  CDNS_PCIE_AT_OB_REGION_PCI_ADDR0_BUS_MASK	GENMASK(27, 20)
+#define  CDNS_PCIE_AT_OB_REGION_PCI_ADDR0_BUS(bus) \
+	(((bus) << 20) & CDNS_PCIE_AT_OB_REGION_PCI_ADDR0_BUS_MASK)
+
+/* Region r Outbound AXI to PCIe Address Translation Register 1 */
+#define CDNS_PCIE_AT_OB_REGION_PCI_ADDR1(r) \
+	(CDNS_PCIE_AT_BASE + 0x0004 + ((r) & 0x1f) * 0x0020)
+
+/* Region r Outbound PCIe Descriptor Register 0 */
+#define CDNS_PCIE_AT_OB_REGION_DESC0(r) \
+	(CDNS_PCIE_AT_BASE + 0x0008 + ((r) & 0x1f) * 0x0020)
+#define  CDNS_PCIE_AT_OB_REGION_DESC0_TYPE_MASK		GENMASK(3, 0)
+#define  CDNS_PCIE_AT_OB_REGION_DESC0_TYPE_MEM		0x2
+#define  CDNS_PCIE_AT_OB_REGION_DESC0_TYPE_IO		0x6
+#define  CDNS_PCIE_AT_OB_REGION_DESC0_TYPE_CONF_TYPE0	0xa
+#define  CDNS_PCIE_AT_OB_REGION_DESC0_TYPE_CONF_TYPE1	0xb
+#define  CDNS_PCIE_AT_OB_REGION_DESC0_TYPE_NORMAL_MSG	0xc
+#define  CDNS_PCIE_AT_OB_REGION_DESC0_TYPE_VENDOR_MSG	0xd
+/* Bit 23 MUST be set in RC mode. */
+#define  CDNS_PCIE_AT_OB_REGION_DESC0_HARDCODED_RID	BIT(23)
+#define  CDNS_PCIE_AT_OB_REGION_DESC0_DEVFN_MASK	GENMASK(31, 24)
+#define  CDNS_PCIE_AT_OB_REGION_DESC0_DEVFN(devfn) \
+	(((devfn) << 24) & CDNS_PCIE_AT_OB_REGION_DESC0_DEVFN_MASK)
+
+/* Region r Outbound PCIe Descriptor Register 1 */
+#define CDNS_PCIE_AT_OB_REGION_DESC1(r)	\
+	(CDNS_PCIE_AT_BASE + 0x000c + ((r) & 0x1f) * 0x0020)
+#define  CDNS_PCIE_AT_OB_REGION_DESC1_BUS_MASK	GENMASK(7, 0)
+#define  CDNS_PCIE_AT_OB_REGION_DESC1_BUS(bus) \
+	((bus) & CDNS_PCIE_AT_OB_REGION_DESC1_BUS_MASK)
+
+/* Region r AXI Region Base Address Register 0 */
+#define CDNS_PCIE_AT_OB_REGION_CPU_ADDR0(r) \
+	(CDNS_PCIE_AT_BASE + 0x0018 + ((r) & 0x1f) * 0x0020)
+#define  CDNS_PCIE_AT_OB_REGION_CPU_ADDR0_NBITS_MASK	GENMASK(5, 0)
+#define  CDNS_PCIE_AT_OB_REGION_CPU_ADDR0_NBITS(nbits) \
+	(((nbits) - 1) & CDNS_PCIE_AT_OB_REGION_CPU_ADDR0_NBITS_MASK)
+
+/* Region r AXI Region Base Address Register 1 */
+#define CDNS_PCIE_AT_OB_REGION_CPU_ADDR1(r) \
+	(CDNS_PCIE_AT_BASE + 0x001c + ((r) & 0x1f) * 0x0020)
+
+/* Root Port BAR Inbound PCIe to AXI Address Translation Register */
+#define CDNS_PCIE_AT_IB_RP_BAR_ADDR0(bar) \
+	(CDNS_PCIE_AT_BASE + 0x0800 + (bar) * 0x0008)
+#define  CDNS_PCIE_AT_IB_RP_BAR_ADDR0_NBITS_MASK	GENMASK(5, 0)
+#define  CDNS_PCIE_AT_IB_RP_BAR_ADDR0_NBITS(nbits) \
+	(((nbits) - 1) & CDNS_PCIE_AT_IB_RP_BAR_ADDR0_NBITS_MASK)
+#define CDNS_PCIE_AT_IB_RP_BAR_ADDR1(bar) \
+	(CDNS_PCIE_AT_BASE + 0x0804 + (bar) * 0x0008)
+
+enum cdns_pcie_rp_bar {
+	RP_BAR0,
+	RP_BAR1,
+	RP_NO_BAR
+};
+
+/**
+ * struct cdns_pcie - private data for Cadence PCIe controller drivers
+ * @reg_base: IO mapped register base
+ * @mem_res: start/end offsets in the physical system memory to map PCI accesses
+ * @is_rc: tell whether the PCIe controller mode is Root Complex or Endpoint.
+ * @bus: In Root Complex mode, the bus number
+ */
+struct cdns_pcie {
+	void __iomem		*reg_base;
+	struct resource		*mem_res;
+	bool			is_rc;
+	u8			bus;
+};
+
+/* Register access */
+static inline void cdns_pcie_writeb(struct cdns_pcie *pcie, u32 reg, u8 value)
+{
+	writeb(value, pcie->reg_base + reg);
+}
+
+static inline void cdns_pcie_writew(struct cdns_pcie *pcie, u32 reg, u16 value)
+{
+	writew(value, pcie->reg_base + reg);
+}
+
+static inline void cdns_pcie_writel(struct cdns_pcie *pcie, u32 reg, u32 value)
+{
+	writel(value, pcie->reg_base + reg);
+}
+
+static inline u32 cdns_pcie_readl(struct cdns_pcie *pcie, u32 reg)
+{
+	return readl(pcie->reg_base + reg);
+}
+
+/* Root Port register access */
+static inline void cdns_pcie_rp_writeb(struct cdns_pcie *pcie,
+				       u32 reg, u8 value)
+{
+	writeb(value, pcie->reg_base + CDNS_PCIE_RP_BASE + reg);
+}
+
+static inline void cdns_pcie_rp_writew(struct cdns_pcie *pcie,
+				       u32 reg, u16 value)
+{
+	writew(value, pcie->reg_base + CDNS_PCIE_RP_BASE + reg);
+}
+
+void cdns_pcie_set_outbound_region(struct cdns_pcie *pcie, u32 r, bool is_io,
+				   u64 cpu_addr, u64 pci_addr, size_t size);
+
+#endif /* _PCIE_CADENCE_H */
-- 
2.11.0

Re: [PATCH v4 0/7] PCI: Add support to the Cadence PCIe controller

[Cyrille Pitchen]

Le 18/01/2018 à 23:52, Cyrille Pitchen a écrit :
> Hi all,
> 
> this series of patches adds support to the Cadence PCIe controller.
> It was tested on a ARM64 platform emulated by a Palladium running the
> pci-next kernel.
> 
> The host mode was tested with some PCIe devices connected to the Palladium
> through a speed-bridge. Some of those devices were a USB host controller
> and a SATA controller. The PCIe host controller was also tested with a
> second controller configured in endpoint mode and connected back to back
> to the first controller.
> 
> The EndPoint Controller (EPC) driver was removed only because I didn't
> have time to take all Kishon's comments into account. However, using a
> fixed patch based on patch 7 of the v2 series + another patch fixing
> the EPF device name chosen by pci_epf_make(), I was abled to probe
> both function 0 and function 1 of the of the 2nd Cadence PCIe controller
> configured in endpoint mode (new hardware design since v2 so function 1
> is now available).
> 
> Currently I'm facing 2 issues, which I didn't have enough time to
> investigate and to fix yet:
> 
> 1 - when the vendor:device IDs are set to 104c:b500 for both functions,
> then I remove both devfn (echo 1 > /sys/bus/pci/devices/$BDF/remove)
> before scanning the PCI bus again (echo 1 > /sys/bus/pci/rescan),
> the PCI enumeration fails reporting that the PCI memory is exhausted.
> 
> 2 - when I set the vendor:device IDs to 104c:0100 for function 0 and
> 104c:b500 and remove only function 1 before scanning the PCI bus again,
> I now pass the PCI enumeration. I also pass the 'pcitest -b <BAR>' test
> but I fail on the MSI test ('pcitest -m <MSI>').
> 
> I'm still investigating on those issues.
>

Both issues fixed:

1 - For the 1st issue, I was removing endpoint devfn instead of the host
controller itself. Then when I configured and enabled the 2nd endpoint
function (endpoint side) before scanning the PCI bus again (host side),
the memory window for the PCI bridge was not resized, hence there was no
space left for BARs of the 2nd endpoint fonction.
Now that I remove the host controller itself (bus 0, dev 0, func 0)
instead of the endpoint functions, it works:
# BDF="0000:00:00.0"
# echo 1 > /sys/bus/pci/devices/$BDF/remove
# echo 1 > /sys/bus/pci/rescan

The memory window for the PCI bridge is resized as needed and the 6 BARs
of each endpoint function can successfully be allocated during the new
PCI enumeration.


2 - For the 2nd issue, I added a new parameter to
cdns_pcie_set_outbound_region() to pass the function number and now
pcitest -m [1 - 32] [-D <device>] works for both endpoint functions.


Finally, I'm able to use both endpoint functions at the same time with
pcitest. I guess I'll send v5 within few days moving the endpoint
controller driver back into the series.

Best regards,

Cyrille
 
> Best regards,
> 
> Cyrille
> 
> ChangeLog
> 
> v3 -> v4:
> - split patch 3 from v3 into patches 3 and 4.
> - remove unused cdns_pcie_reset_outbound_region() from old patch 6
>   (new patch 7).
> - other patches are unchanged.
> 
> v2 -> v3:
> 
> - rebase on today's linux-pci/next (20180110) 
> 
> patch1:
> - rework the commit message of patch 1 and add two new comments on why endpoint
>   library users must be linked after the endpoint library itself and why
>   the dwc rule uses obj-y instead of obj-$(CONFIG_PCIE_CONFIG_DW).
> - update patch 1 to add missing ifdef CONFIG_PCI / endif in
>   drivers/pci/dwc/Makefile around the obj-$(CONFIG_ARM64) += pcie-hisi.o rule,
>   like for the other obj-$(CONFIG_ARM64) rules in drivers/pci/host/Makefile.
> 
> patch2: unchanged
> 
> patch3:
> - update patch 3 so the bridge hooks/members initialization is left to the
>   host bridges probe routines.
> 
> patch4: unchanged
> 
> patch5:
> - collect 'Reviewed-by' tag from Rob Herring for the DT bindings.
> 
> patch6:
> - remove explanation in the commit message on why obj-$(CONFIG_PCIE_CANDENCE) is
>   placed after obj-$(CONFIG_PCI_ENDPOINT) in drivers/pci/Makefile since a
>   comment on it has been added into patch1.
> - remove menuconfig PCI_CADENCE in drivers/pci/cadence/Kconfig to match
>   drivers/pci/dwc/Kconfig.
> - adapt patch6 to the changes done in patch3 for the pci_host_probe() function.
> 
> v1 -> v2:
> - add new properties in the device-tree bindings: 'cdns,max-outbound-regions'
>   and 'cdns,no-bar-match-nbits'.
> - add a new patch to regroup all makefile rules in drivers/pci/Makefile, hence
>   cleaning drivers/Makefile up.
> - change the license text to use the recommanded format:
>   // SPDX-License-Identifier: GPL-2.0
> - add a new patch updating the API of the EPC library to add support to
>   multi-function devices.
> - add a 2 new patches to share more common code between host controller drivers
> - remove some useless tests
> - add more comments in both drivers.
> - fix DT bindings examples
> - remove useless init of the primary, secondary and sub-ordinate bus numbers in
>   the PCI configuration space of the root port.
> - remove cdns_pcie_ep_stop() function and rework cdns_pcie_ep_start() function
> 
> Cyrille Pitchen (6):
>   PCI: Regroup all PCI related entries into drivers/pci/Makefile
>   PCI: OF: Add generic function to parse and allocate PCI resources
>   PCI: generic: fix missing call of pci_free_resource_list()
>   PCI: Add generic function to probe PCI host controllers
>   PCI: Add vendor ID for Cadence
>   PCI: cadence: Add host driver for Cadence PCIe controller
> 
> Scott Telford (1):
>   dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host
>     controller
> 
>  .../bindings/pci/cdns,cdns-pcie-host.txt           |  60 ++++
>  MAINTAINERS                                        |   7 +
>  drivers/Makefile                                   |   5 +-
>  drivers/pci/Kconfig                                |   2 +
>  drivers/pci/Makefile                               |  14 +-
>  drivers/pci/cadence/Kconfig                        |  16 +
>  drivers/pci/cadence/Makefile                       |   3 +
>  drivers/pci/cadence/pcie-cadence-host.c            | 336 +++++++++++++++++++++
>  drivers/pci/cadence/pcie-cadence.c                 |  56 ++++
>  drivers/pci/cadence/pcie-cadence.h                 | 194 ++++++++++++
>  drivers/pci/dwc/Makefile                           |   2 +
>  drivers/pci/host/Makefile                          |   2 +
>  drivers/pci/host/pci-host-common.c                 |  72 +----
>  drivers/pci/of.c                                   |  51 ++++
>  drivers/pci/probe.c                                |  33 ++
>  include/linux/pci.h                                |  10 +
>  include/linux/pci_ids.h                            |   2 +
>  17 files changed, 790 insertions(+), 75 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
>  create mode 100644 drivers/pci/cadence/Kconfig
>  create mode 100644 drivers/pci/cadence/Makefile
>  create mode 100644 drivers/pci/cadence/pcie-cadence-host.c
>  create mode 100644 drivers/pci/cadence/pcie-cadence.c
>  create mode 100644 drivers/pci/cadence/pcie-cadence.h
> 


-- 
Cyrille Pitchen, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com