Re: [PATCH v9 00/15] qcom: pm8150: add support for thermal monitoring

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

On Thu, 12 Nov 2020 at 14:39, Daniel Lezcano <daniel.lezcano@linaro.org> wrote:
>
>
> Shall I take patch 1/15 and 12/15 ?

12/15 will not compile without several previous patches, so it might
be better to take all of them through the single tree.

>
>
>
> On 02/11/2020 18:49, Dmitry Baryshkov wrote:
> > This patch serie adds support for thermal monitoring block on Qualcomm's
> > PMIC5 chips. PM8150{,b,l} and sm8250-mtp board device trees are extended
> > to support thermal zones provided by this thermal monitoring block.
> > Unlike the rest of PMIC thermal senses, these thermal zones describe
> > particular thermistors, which differ between from board to board.
> >
> > Changes since v8:
> >  - Simplified qcom_vadc_map_voltage_temp() code by removing ascending
> >    tables support
> >  - Simplified qcom-vadc-common volt/temp mapping code
> >  - Implement suggestions by Matthias Kaehlcke: message formatting,
> >    rewrite comments, remove unused variable initialization.
> >
> > Changes since v7:
> >  - Move qcom-vadc-common.h header to include/linux/iio/adc/ dir.
> >  - Use explicit sizeof(var) instead of hand-coding 1 when accessing
> >    adc-tm registers.
> >  - Remove buffer read from adc_tm5_init().
> >  - Remove extra on-stack var from adc_tm5_get_temp().
> >  - Minor formatting changes as suggested Daniel.
> >
> > Changes since v6:
> >  - Added include <linux/bitfield.h> as noted by Jishnu Prakash.
> >
> > Changes since v5:
> >  - Reworked DT bindings:
> >    * Removed qcom,adc-channel, instead it is parsed from io-channels
> >    * Renamed qcom,hw-settle-time to include -us suffix
> >  - Re-added monitor enabling which got lost during refactored. Noted by
> >    Jishnu Prakash.
> >  - Use threaded IRQ handler as susggested by Jishnu.
> >
> > Changes since v4:
> >  - Added kernel-doc comments to ADC-TM structures
> >  - Used several sizeof(buf) instead of hand-conding register size
> >
> > Changes since v3:
> >  - Fix DT description to spell "thermal monitoring" instead of just TM
> >  - Fix warnings in DT example
> >  - Add EXPORT_SYMBOL_GPL(of_iio_channel_get_by_name)
> >  - Fixed whitespace chanes in qcom-vadc-common.c
> >  - Removed error message if IIO chanel get returns -EPROBE_DEFER
> >
> > Changes since v2:
> >  - IIO: export of_iio_channel_get_by_name() function
> >  - dt-bindings: move individual io-channels to each thermal monitoring
> >    channel rather than listing them all in device node
> >  - added fallback defaults to of_device_get_match_data calls in
> >    qcom-spmi-adc5 and qcom-spmi-adc-tm5 drivers
> >  - minor typo fixes
> >
> > Changes since v1:
> >  - Introduce fixp_linear_interpolate() by Craig Tatlor
> >  - Lots of syntax/whitespace changes
> >  - Cleaned up register definitions per Jonathan's suggestion
> >  - Implemented most of the suggestions from Bjorn's and Jonathan's
> >    review
> >
> >
>
>
> --
> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
>
> Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
> <http://twitter.com/#!/linaroorg> Twitter |
> <http://www.linaro.org/linaro-blog/> Blog



-- 
With best wishes
Dmitry