devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] ARM: dts: ux500: snowball: Remove unused PRCMU cpufreq node
@ 2019-11-17 22:27 Stephan Gerhold
  2019-11-19 14:29 ` Linus Walleij
  0 siblings, 1 reply; 2+ messages in thread
From: Stephan Gerhold @ 2019-11-17 22:27 UTC (permalink / raw)
  To: Linus Walleij
  Cc: Rob Herring, Mark Rutland, linux-arm-kernel, devicetree,
	linux-kernel, Stephan Gerhold

Commit a435adbec264 ("ARM: dts: augment Ux500 to use DT cpufreq")
switched the Ux500 device tree to use the generic DT cpufreq driver
and removed the PRCMU cpufreq node.

The snowball DTS still references it, without effect, since cpufreq
is now enabled by default. Remove the unused node.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 arch/arm/boot/dts/ste-snowball.dts | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index efbc4467b8b7..566b35ac0d0c 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -377,10 +377,6 @@
 		};
 
 		prcmu@80157000 {
-			cpufreq {
-				status = "okay";
-			};
-
 			ab8500 {
 				ab8500-gpio {
 					/*
-- 
2.23.0


^ permalink raw reply related	[flat|nested] 2+ messages in thread

* Re: [PATCH] ARM: dts: ux500: snowball: Remove unused PRCMU cpufreq node
  2019-11-17 22:27 [PATCH] ARM: dts: ux500: snowball: Remove unused PRCMU cpufreq node Stephan Gerhold
@ 2019-11-19 14:29 ` Linus Walleij
  0 siblings, 0 replies; 2+ messages in thread
From: Linus Walleij @ 2019-11-19 14:29 UTC (permalink / raw)
  To: Stephan Gerhold
  Cc: Rob Herring, Mark Rutland, Linux ARM,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-kernel

On Sun, Nov 17, 2019 at 11:28 PM Stephan Gerhold <stephan@gerhold.net> wrote:

> Commit a435adbec264 ("ARM: dts: augment Ux500 to use DT cpufreq")
> switched the Ux500 device tree to use the generic DT cpufreq driver
> and removed the PRCMU cpufreq node.
>
> The snowball DTS still references it, without effect, since cpufreq
> is now enabled by default. Remove the unused node.
>
> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>

Patch applied for the v5.6 kernel cycle!

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2019-11-19 14:29 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-17 22:27 [PATCH] ARM: dts: ux500: snowball: Remove unused PRCMU cpufreq node Stephan Gerhold
2019-11-19 14:29 ` Linus Walleij

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).