devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Luka Kovacic <luka.kovacic@sartura.hr>
To: Rob Herring <robh@kernel.org>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	linux-hwmon@vger.kernel.org,
	Linux LED Subsystem <linux-leds@vger.kernel.org>,
	devicetree <devicetree@vger.kernel.org>,
	Lee Jones <lee.jones@linaro.org>, Pavel Machek <pavel@ucw.cz>,
	Dan Murphy <dmurphy@ti.com>, Jean Delvare <jdelvare@suse.com>,
	Guenter Roeck <linux@roeck-us.net>,
	Marek Behun <marek.behun@nic.cz>,
	Luka Perkov <luka.perkov@sartura.hr>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	Robert Marko <robert.marko@sartura.hr>
Subject: Re: [PATCH v6 1/6] dt-bindings: Add iEi vendor prefix and iEi WT61P803 PUZZLE driver bindings
Date: Fri, 23 Oct 2020 23:54:43 +0200	[thread overview]
Message-ID: <CADZsf3ZwgOxP4ZVasdohjw_ky8L-Oqha_wjONtz6AeRSGH6NzA@mail.gmail.com> (raw)
In-Reply-To: <20201020153016.GC866676@bogus>

Hello Rob,

On Tue, Oct 20, 2020 at 5:30 PM Rob Herring <robh@kernel.org> wrote:
>
> On Tue, Oct 20, 2020 at 12:18:54AM +0200, Luka Kovacic wrote:
> > Add the iEi WT61P803 PUZZLE Device Tree bindings for MFD, HWMON and LED
> > drivers. A new vendor prefix is also added accordingly for
> > IEI Integration Corp.
> >
> > Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
> > Cc: Luka Perkov <luka.perkov@sartura.hr>
> > Cc: Robert Marko <robert.marko@sartura.hr>
> > ---
> >  .../hwmon/iei,wt61p803-puzzle-hwmon.yaml      | 41 ++++++++++
> >  .../leds/iei,wt61p803-puzzle-leds.yaml        | 45 ++++++++++
> >  .../bindings/mfd/iei,wt61p803-puzzle.yaml     | 82 +++++++++++++++++++
> >  .../devicetree/bindings/vendor-prefixes.yaml  |  2 +
> >  4 files changed, 170 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
> >  create mode 100644 Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
> >  create mode 100644 Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
> > new file mode 100644
> > index 000000000000..37f0030df237
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
> > @@ -0,0 +1,41 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/hwmon/iei,wt61p803-puzzle-hwmon.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: iEi WT61P803 PUZZLE MCU HWMON module from IEI Integration Corp.
> > +
> > +maintainers:
> > +  - Luka Kovacic <luka.kovacic@sartura.hr>
> > +
> > +description: |
> > +  This module is a part of the iEi WT61P803 PUZZLE MFD device. For more details
> > +  see Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml.
> > +
> > +  The HWMON module is a sub-node of the MCU node in the Device Tree.
> > +
> > +properties:
> > +  compatible:
> > +    const: iei,wt61p803-puzzle-hwmon
> > +
> > +patternProperties:
> > +  "^fan-group@[0-1]$":
> > +    type: object
> > +    properties:
> > +      reg:
> > +        minimum: 0
> > +        maximum: 1
> > +        description:
> > +          Fan group ID
>
> Blank line between properties.
>
> > +      cooling-levels:
> > +        maxItems: 255
> > +        description:
> > +          Cooling levels for the fans (PWM value mapping)
> > +    description: |
> > +      Properties for each fan group.
> > +    required:
> > +      - reg
> > +
> > +required:
> > +  - compatible
>
> additionalProperties: false
>
> > diff --git a/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml b/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
> > new file mode 100644
> > index 000000000000..0d353e5803bf
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
> > @@ -0,0 +1,45 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/leds/iei,wt61p803-puzzle-leds.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: iEi WT61P803 PUZZLE MCU LED module from IEI Integration Corp.
> > +
> > +maintainers:
> > +  - Luka Kovacic <luka.kovacic@sartura.hr>
> > +
> > +description: |
> > +  This module is a part of the iEi WT61P803 PUZZLE MFD device. For more details
> > +  see Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml.
> > +
> > +  The LED module is a sub-node of the MCU node in the Device Tree.
> > +
> > +properties:
> > +  compatible:
> > +    const: iei,wt61p803-puzzle-leds
> > +
> > +  "#address-cells":
> > +    const: 1
> > +
> > +  "#size-cells":
> > +    const: 0
> > +
> > +patternProperties:
> > +  "^led@0$":
>
> Fixed string, not a pattern. Do you plan to add more? Define the schema
> to what the h/w supports, not current driver support.

The microcontroller software itself currently supports many different GPIOs
which could in the future, in different board implementations be repurposed as
LEDs.

Do I keep the pattern in this case?

>
> > +    type: object
> > +    $ref: common.yaml
> > +    description: |
> > +      Properties for a single LED.
> > +
> > +    properties:
> > +      reg:
> > +        description:
> > +          Index of the LED. Only one LED is supported at the moment.
> > +        minimum: 0
> > +        maximum: 0
> > +
> > +required:
> > +  - compatible
> > +  - "#address-cells"
> > +  - "#size-cells"
>
> additionalProperties: false
>
> > diff --git a/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml b/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
> > new file mode 100644
> > index 000000000000..79a232d75093
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
> > @@ -0,0 +1,82 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mfd/iei,wt61p803-puzzle.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: iEi WT61P803 PUZZLE MCU from IEI Integration Corp.
> > +
> > +maintainers:
> > +  - Luka Kovacic <luka.kovacic@sartura.hr>
> > +
> > +description: |
> > +  iEi WT61P803 PUZZLE MCU is embedded in some iEi Puzzle series boards.
> > +  It's used for controlling system power states, fans, LEDs and temperature
> > +  sensors.
> > +
> > +  For Device Tree bindings of other sub-modules (HWMON, LEDs) refer to the
> > +  binding documents under the respective subsystem directories.
> > +
> > +properties:
> > +  compatible:
> > +    const: iei,wt61p803-puzzle
> > +
> > +  current-speed:
> > +    description:
> > +      Serial bus speed in bps
> > +    maxItems: 1
> > +
> > +  enable-beep: true
> > +
> > +  iei-wt61p803-hwmon:
>
> Just 'hwmon'
>
> > +    $ref: ../hwmon/iei,wt61p803-puzzle-hwmon.yaml
> > +
> > +  leds:
> > +    $ref: ../leds/iei,wt61p803-puzzle-leds.yaml
> > +
> > +required:
> > +  - compatible
> > +  - current-speed
>
> additionalProperties: false
>
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/leds/common.h>
> > +    serial {
> > +        status = "okay";
> > +        mcu {
> > +            compatible = "iei,wt61p803-puzzle";
> > +            current-speed = <115200>;
> > +            enable-beep;
> > +
> > +            leds {
> > +                compatible = "iei,wt61p803-puzzle-leds";
> > +                #address-cells = <1>;
> > +                #size-cells = <0>;
> > +
> > +                led@0 {
> > +                    reg = <0>;
> > +                    function = LED_FUNCTION_POWER;
> > +                    color = <LED_COLOR_ID_BLUE>;
> > +                };
> > +            };
> > +
> > +            iei-wt61p803-puzzle-hwmon {
> > +                compatible = "iei,wt61p803-puzzle-hwmon";
> > +
> > +                #address-cells = <1>;
> > +                #size-cells = <0>;
> > +
> > +                fan-group@0 {
> > +                    #cooling-cells = <2>;
> > +                    reg = <0x00>;
> > +                    cooling-levels = <64 102 170 230 250>;
> > +                };
> > +
> > +                fan-group@1 {
> > +                    #cooling-cells = <2>;
> > +                    reg = <0x01>;
> > +                    cooling-levels = <64 102 170 230 250>;
> > +                };
> > +            };
> > +        };
> > +    };
> > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> > index 63996ab03521..5f2595f0b2ad 100644
> > --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
> > +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> > @@ -467,6 +467,8 @@ patternProperties:
> >      description: IC Plus Corp.
> >    "^idt,.*":
> >      description: Integrated Device Technologies, Inc.
> > +  "^iei,.*":
> > +    description: IEI Integration Corp.
> >    "^ifi,.*":
> >      description: Ingenieurburo Fur Ic-Technologie (I/F/I)
> >    "^ilitek,.*":
> > --
> > 2.26.2
> >

I will resolve the mentioned issues in the next patchset.

Kind regards,
Luka

  reply	other threads:[~2020-10-23 21:55 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-19 22:18 [PATCH v6 0/6] Add support for the iEi WT61P803 PUZZLE MCU Luka Kovacic
2020-10-19 22:18 ` [PATCH v6 1/6] dt-bindings: Add iEi vendor prefix and iEi WT61P803 PUZZLE driver bindings Luka Kovacic
2020-10-20 15:24   ` Rob Herring
2020-10-20 15:30   ` Rob Herring
2020-10-23 21:54     ` Luka Kovacic [this message]
2020-10-19 22:18 ` [PATCH v6 2/6] drivers: mfd: Add a driver for iEi WT61P803 PUZZLE MCU Luka Kovacic
2020-10-20  2:19   ` kernel test robot
2020-11-04 15:22     ` Lee Jones
2020-11-10 20:14       ` Luka Kovacic
2020-10-19 22:18 ` [PATCH v6 3/6] drivers: hwmon: Add the iEi WT61P803 PUZZLE HWMON driver Luka Kovacic
2020-10-20  9:00   ` Andy Shevchenko
2020-10-23 21:47     ` Luka Kovacic
2020-10-25  1:26       ` Luka Kovacic
2020-10-19 22:18 ` [PATCH v6 4/6] drivers: leds: Add the iEi WT61P803 PUZZLE LED driver Luka Kovacic
2020-10-19 22:18 ` [PATCH v6 5/6] Documentation/ABI: Add iei-wt61p803-puzzle driver sysfs interface documentation Luka Kovacic
2020-10-19 22:18 ` [PATCH v6 6/6] MAINTAINERS: Add an entry for the iEi WT61P803 PUZZLE driver Luka Kovacic

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CADZsf3ZwgOxP4ZVasdohjw_ky8L-Oqha_wjONtz6AeRSGH6NzA@mail.gmail.com \
    --to=luka.kovacic@sartura.hr \
    --cc=andy.shevchenko@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmurphy@ti.com \
    --cc=jdelvare@suse.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=luka.perkov@sartura.hr \
    --cc=marek.behun@nic.cz \
    --cc=pavel@ucw.cz \
    --cc=robert.marko@sartura.hr \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).