[PATCH 00/15] sx9310 iio driver updates

[PATCH 00/15] sx9310 iio driver updates

[Daniel Campello]

The first patch resends the DT binding for the driver that was merged in
v5.8-rc1 with a small change to update for proper regulators. The second
through the eleventh patch fixes several issues dropped from v8 to v9
when the initial patch was merged. The twelveth patch fixes a few
printks that are missing newlines and should be totally non-trivial to
apply. The thirteenth patch drops channel_users because it's unused. The
final patch adds support to enable the svdd and vdd supplies so that
this driver can work on a board where the svdd supply isn't enabled at
boot and needs to be turned on before this driver starts to communicate
with the chip.


Daniel Campello (12):
  dt-bindings: iio: Add bindings for sx9310 sensor
  iio: sx9310: Update macros declarations
  iio: sx9310: Fix irq handling
  iio: sx9310: Remove acpi and of table macros
  iio: sx9310: Change from .probe to .probe_new
  iio: sx9310: Align memory
  iio: sx9310: Use long instead of int for channel bitmaps
  iio: sx9310: Use regmap_read_poll_timeout() for compensation
  iio: sx9310: Update copyright
  iio: sx9310: Simplify error return handling
  iio: sx9310: Use variable to hold &client->dev
  iio: sx9310: Miscellaneous format fixes

Stephen Boyd (3):
  iio: sx9310: Add newlines to printks
  iio: sx9310: Drop channel_users[]
  iio: sx9310: Enable vdd and svdd regulators at probe

 .../iio/proximity/semtech,sx9310.yaml         |  60 +++
 drivers/iio/proximity/sx9310.c                | 407 +++++++++---------
 2 files changed, 263 insertions(+), 204 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml

--
2.28.0.rc0.142.g3c755180ce-goog

[PATCH 01/15] dt-bindings: iio: Add bindings for sx9310 sensor

[Daniel Campello]

Adds device tree bandings for sx9310 sensor.

Signed-off-by: Daniel Campello <campello@chromium.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Rob Herring <robh+dt@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
[swboyd@chromium.org: Add both regulators and make them optional]
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---

 .../iio/proximity/semtech,sx9310.yaml         | 60 +++++++++++++++++++
 1 file changed, 60 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml

diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
new file mode 100644
index 00000000000000..ba734ee868c77f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9310.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Semtech's SX9310 capacitive proximity sensor
+
+maintainers:
+  - Daniel Campello <campello@chromium.org>
+
+description: |
+  Semtech's SX9310/SX9311 capacitive proximity/button solution.
+
+  Specifications about the devices can be found at:
+  https://www.semtech.com/products/smart-sensing/sar-sensors/sx9310
+
+properties:
+  compatible:
+    enum:
+      - semtech,sx9310
+      - semtech,sx9311
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      The sole interrupt generated by the device used to announce the
+      preceding reading request has finished and that data is
+      available or that a close/far proximity event has happened.
+    maxItems: 1
+
+  vdd-supply:
+    description: Main power supply
+
+  svdd-supply:
+    description: Host interface power supply
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      proximity@28 {
+        compatible = "semtech,sx9310";
+        reg = <0x28>;
+        interrupt-parent = <&pio>;
+        interrupts = <5 IRQ_TYPE_LEVEL_LOW 5>;
+        vdd-supply = <&pp3300_a>;
+        svdd-supply = <&pp1800_prox>;
+      };
+    };
-- 
2.28.0.rc0.142.g3c755180ce-goog

Re: [PATCH 01/15] dt-bindings: iio: Add bindings for sx9310 sensor

[Stephen Boyd]

Quoting Daniel Campello (2020-07-28 08:12:44)
> diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
> new file mode 100644
> index 00000000000000..ba734ee868c77f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
> @@ -0,0 +1,60 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9310.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Semtech's SX9310 capacitive proximity sensor
> +
> +maintainers:
> +  - Daniel Campello <campello@chromium.org>
> +
> +description: |
> +  Semtech's SX9310/SX9311 capacitive proximity/button solution.
> +
> +  Specifications about the devices can be found at:
> +  https://www.semtech.com/products/smart-sensing/sar-sensors/sx9310
> +
> +properties:
> +  compatible:
> +    enum:
> +      - semtech,sx9310
> +      - semtech,sx9311
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    description:
> +      The sole interrupt generated by the device used to announce the
> +      preceding reading request has finished and that data is
> +      available or that a close/far proximity event has happened.
> +    maxItems: 1
> +
> +  vdd-supply:
> +    description: Main power supply
> +
> +  svdd-supply:
> +    description: Host interface power supply

I think we need to add #io-channel-cells = <1> here as a required
property.

   "#io-channel-cells":
       const: 1

> +
> +required:
> +  - compatible
> +  - reg

And 

  - "#io-channel-cells"

> +
> +additionalProperties: false
> +

[PATCH 02/15] iio: sx9310: Update macros declarations

[Daniel Campello]

Follows spec sheet for macro declarations.

Signed-off-by: Daniel Campello <campello@chromium.org>
---

 drivers/iio/proximity/sx9310.c | 143 +++++++++++++++------------------
 1 file changed, 67 insertions(+), 76 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index d161f3061e353d..07895d4b935d12 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -33,45 +33,45 @@
 #define SX9310_REG_IRQ_SRC				0x00
 #define SX9310_REG_STAT0				0x01
 #define SX9310_REG_STAT1				0x02
+#define SX9310_REG_STAT1_COMPSTAT_MASK			GENMASK(3, 0)
 #define SX9310_REG_IRQ_MSK				0x03
 #define   SX9310_CONVDONE_IRQ				BIT(3)
 #define   SX9310_FAR_IRQ				BIT(5)
 #define   SX9310_CLOSE_IRQ				BIT(6)
-#define   SX9310_EVENT_IRQ				(SX9310_FAR_IRQ | \
-							 SX9310_CLOSE_IRQ)
 #define SX9310_REG_IRQ_FUNC				0x04
 
 #define SX9310_REG_PROX_CTRL0				0x10
-#define   SX9310_REG_PROX_CTRL0_PROXSTAT2		0x10
-#define   SX9310_REG_PROX_CTRL0_EN_MASK			0x0F
+#define   SX9310_REG_PROX_CTRL0_SENSOREN_MASK		GENMASK(3, 0)
+#define   SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK		GENMASK(7, 4)
+#define   SX9310_REG_PROX_CTRL0_SCANPERIOD_SHIFT	4
+#define   SX9310_REG_PROX_CTRL0_SCANPERIOD_15MS		0x01
 #define SX9310_REG_PROX_CTRL1				0x11
 #define SX9310_REG_PROX_CTRL2				0x12
-#define   SX9310_REG_PROX_CTRL2_COMBMODE_ALL		0x80
-#define   SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC	0x04
+#define   SX9310_REG_PROX_CTRL2_COMBMODE_CS1_CS2	(0x02 << 6)
+#define   SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC	(0x01 << 2)
 #define SX9310_REG_PROX_CTRL3				0x13
-#define   SX9310_REG_PROX_CTRL3_GAIN0_X8		0x0c
+#define   SX9310_REG_PROX_CTRL3_GAIN0_X8		(0x03 << 2)
 #define   SX9310_REG_PROX_CTRL3_GAIN12_X4		0x02
 #define SX9310_REG_PROX_CTRL4				0x14
 #define   SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST	0x07
 #define SX9310_REG_PROX_CTRL5				0x15
-#define   SX9310_REG_PROX_CTRL5_RANGE_SMALL		0xc0
-#define   SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1		0x04
+#define   SX9310_REG_PROX_CTRL5_RANGE_SMALL		(0x03 << 6)
+#define   SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1		(0x01 << 2)
 #define   SX9310_REG_PROX_CTRL5_RAWFILT_1P25		0x02
 #define SX9310_REG_PROX_CTRL6				0x16
-#define   SX9310_REG_PROX_CTRL6_COMP_COMMON		0x20
+#define   SX9310_REG_PROX_CTRL6_AVGTHRESH_DEFAULT	0x20
 #define SX9310_REG_PROX_CTRL7				0x17
-#define   SX9310_REG_PROX_CTRL7_AVGNEGFILT_2		0x08
+#define   SX9310_REG_PROX_CTRL7_AVGNEGFILT_2		(0x01 << 3)
 #define   SX9310_REG_PROX_CTRL7_AVGPOSFILT_512		0x05
 #define SX9310_REG_PROX_CTRL8				0x18
 #define SX9310_REG_PROX_CTRL9				0x19
-#define   SX9310_REG_PROX_CTRL8_9_PTHRESH12_28		0x40
-#define   SX9310_REG_PROX_CTRL8_9_PTHRESH_96		0x88
+#define   SX9310_REG_PROX_CTRL8_9_PTHRESH_28		(0x08 << 3)
+#define   SX9310_REG_PROX_CTRL8_9_PTHRESH_96		(0x11 << 3)
 #define   SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900	0x03
 #define   SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500	0x05
 #define SX9310_REG_PROX_CTRL10				0x1a
-#define   SX9310_REG_PROX_CTRL10_HYST_6PCT		0x10
-#define   SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_8	0x12
-#define   SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_8		0x03
+#define   SX9310_REG_PROX_CTRL10_HYST_6PCT		(0x01 << 4)
+#define   SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_2		0x01
 #define SX9310_REG_PROX_CTRL11				0x1b
 #define SX9310_REG_PROX_CTRL12				0x1c
 #define SX9310_REG_PROX_CTRL13				0x1d
@@ -82,8 +82,8 @@
 #define SX9310_REG_PROX_CTRL18				0x22
 #define SX9310_REG_PROX_CTRL19				0x23
 #define SX9310_REG_SAR_CTRL0				0x2a
-#define   SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES		0x40
-#define   SX9310_REG_SAR_CTRL0_SARHYST_8		0x10
+#define   SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES		(0x02 << 5)
+#define   SX9310_REG_SAR_CTRL0_SARHYST_8		(0x02 << 3)
 #define SX9310_REG_SAR_CTRL1				0x2b
 /* Each increment of the slope register is 0.0078125. */
 #define   SX9310_REG_SAR_CTRL1_SLOPE(_hnslope)		(_hnslope / 78125)
@@ -107,7 +107,7 @@
 #define SX9310_REG_SAR_MSB				0x39
 #define SX9310_REG_SAR_LSB				0x3a
 
-#define SX9310_REG_I2CADDR				0x40
+#define SX9310_REG_I2C_ADDR				0x40
 #define SX9310_REG_PAUSE				0x41
 #define SX9310_REG_WHOAMI				0x42
 #define   SX9310_WHOAMI_VALUE				0x01
@@ -116,14 +116,9 @@
 #define SX9310_REG_RESET				0x7f
 #define   SX9310_SOFT_RESET				0xde
 
-#define SX9310_SCAN_PERIOD_MASK				GENMASK(7, 4)
-#define SX9310_SCAN_PERIOD_SHIFT			4
-
-#define SX9310_COMPSTAT_MASK				GENMASK(3, 0)
 
 /* 4 hardware channels, as defined in STAT0: COMB, CS2, CS1 and CS0. */
 #define SX9310_NUM_CHANNELS				4
-#define SX9310_CHAN_ENABLED_MASK			GENMASK(3, 0)
 
 struct sx9310_data {
 	/* Serialize access to registers and channel configuration */
@@ -251,7 +246,7 @@ static const struct regmap_range sx9310_readable_reg_ranges[] = {
 	regmap_reg_range(SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL19),
 	regmap_reg_range(SX9310_REG_SAR_CTRL0, SX9310_REG_SAR_CTRL2),
 	regmap_reg_range(SX9310_REG_SENSOR_SEL, SX9310_REG_SAR_LSB),
-	regmap_reg_range(SX9310_REG_I2CADDR, SX9310_REG_WHOAMI),
+	regmap_reg_range(SX9310_REG_I2C_ADDR, SX9310_REG_WHOAMI),
 	regmap_reg_range(SX9310_REG_RESET, SX9310_REG_RESET),
 };
 
@@ -292,7 +287,7 @@ static int sx9310_update_chan_en(struct sx9310_data *data,
 
 	if ((data->chan_read | data->chan_event) != (chan_read | chan_event)) {
 		ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL0,
-					 SX9310_CHAN_ENABLED_MASK,
+					 SX9310_REG_PROX_CTRL0_SENSOREN_MASK,
 					 chan_read | chan_event);
 		if (ret)
 			return ret;
@@ -361,7 +356,8 @@ static int sx9310_wait_for_sample(struct sx9310_data *data)
 	if (ret < 0)
 		return ret;
 
-	val = (val & SX9310_SCAN_PERIOD_MASK) >> SX9310_SCAN_PERIOD_SHIFT;
+	val = (val & SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK) >>
+	      SX9310_REG_PROX_CTRL0_SCANPERIOD_SHIFT;
 
 	msleep(sx9310_scan_period_table[val]);
 
@@ -435,7 +431,8 @@ static int sx9310_read_samp_freq(struct sx9310_data *data, int *val, int *val2)
 	if (ret < 0)
 		return ret;
 
-	regval = (regval & SX9310_SCAN_PERIOD_MASK) >> SX9310_SCAN_PERIOD_SHIFT;
+	regval = (regval & SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK) >>
+		 SX9310_REG_PROX_CTRL0_SCANPERIOD_SHIFT;
 	*val = sx9310_samp_freq_table[regval].val;
 	*val2 = sx9310_samp_freq_table[regval].val2;
 
@@ -483,8 +480,8 @@ static int sx9310_set_samp_freq(struct sx9310_data *data, int val, int val2)
 	mutex_lock(&data->mutex);
 
 	ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL0,
-				 SX9310_SCAN_PERIOD_MASK,
-				 i << SX9310_SCAN_PERIOD_SHIFT);
+				 SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK,
+				 i << SX9310_REG_PROX_CTRL0_SCANPERIOD_SHIFT);
 
 	mutex_unlock(&data->mutex);
 
@@ -572,7 +569,7 @@ static irqreturn_t sx9310_irq_thread_handler(int irq, void *private)
 		goto out;
 	}
 
-	if (val & SX9310_EVENT_IRQ)
+	if (val & (SX9310_FAR_IRQ | SX9310_CLOSE_IRQ))
 		sx9310_push_events(indio_dev);
 
 	if (val & SX9310_CONVDONE_IRQ)
@@ -600,6 +597,7 @@ static int sx9310_write_event_config(struct iio_dev *indio_dev,
 				     enum iio_event_direction dir, int state)
 {
 	struct sx9310_data *data = iio_priv(indio_dev);
+	unsigned int eventirq = SX9310_FAR_IRQ | SX9310_CLOSE_IRQ;
 	int ret;
 
 	/* If the state hasn't changed, there's nothing to do. */
@@ -612,7 +610,7 @@ static int sx9310_write_event_config(struct iio_dev *indio_dev,
 		if (ret < 0)
 			goto out_unlock;
 		if (!(data->chan_event & ~BIT(chan->channel))) {
-			ret = sx9310_enable_irq(data, SX9310_EVENT_IRQ);
+			ret = sx9310_enable_irq(data, eventirq);
 			if (ret < 0)
 				sx9310_put_event_channel(data, chan->channel);
 		}
@@ -621,7 +619,7 @@ static int sx9310_write_event_config(struct iio_dev *indio_dev,
 		if (ret < 0)
 			goto out_unlock;
 		if (!data->chan_event) {
-			ret = sx9310_disable_irq(data, SX9310_EVENT_IRQ);
+			ret = sx9310_disable_irq(data, eventirq);
 			if (ret < 0)
 				sx9310_get_event_channel(data, chan->channel);
 		}
@@ -746,53 +744,46 @@ struct sx9310_reg_default {
 	u8 def;
 };
 
-#define SX_INIT(_reg, _def)			\
-	{					\
-		.reg = SX9310_REG_##_reg,	\
-		.def = _def,			\
-	}
-
 static const struct sx9310_reg_default sx9310_default_regs[] = {
-	SX_INIT(IRQ_MSK, 0x00),
-	SX_INIT(IRQ_FUNC, 0x00),
+	{ SX9310_REG_IRQ_MSK, 0x00 },
+	{ SX9310_REG_IRQ_FUNC, 0x00 },
 	/*
 	 * The lower 4 bits should not be set as it enable sensors measurements.
 	 * Turning the detection on before the configuration values are set to
 	 * good values can cause the device to return erroneous readings.
 	 */
-	SX_INIT(PROX_CTRL0, SX9310_REG_PROX_CTRL0_PROXSTAT2),
-	SX_INIT(PROX_CTRL1, 0x00),
-	SX_INIT(PROX_CTRL2, SX9310_REG_PROX_CTRL2_COMBMODE_ALL |
-			    SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC),
-	SX_INIT(PROX_CTRL3, SX9310_REG_PROX_CTRL3_GAIN0_X8 |
-			    SX9310_REG_PROX_CTRL3_GAIN12_X4),
-	SX_INIT(PROX_CTRL4, SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST),
-	SX_INIT(PROX_CTRL5, SX9310_REG_PROX_CTRL5_RANGE_SMALL |
-			    SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1 |
-			    SX9310_REG_PROX_CTRL5_RAWFILT_1P25),
-	SX_INIT(PROX_CTRL6, SX9310_REG_PROX_CTRL6_COMP_COMMON),
-	SX_INIT(PROX_CTRL7, SX9310_REG_PROX_CTRL7_AVGNEGFILT_2 |
-			    SX9310_REG_PROX_CTRL7_AVGPOSFILT_512),
-	SX_INIT(PROX_CTRL8, SX9310_REG_PROX_CTRL8_9_PTHRESH_96 |
-			    SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500),
-	SX_INIT(PROX_CTRL9, SX9310_REG_PROX_CTRL8_9_PTHRESH12_28 |
-			    SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900),
-	SX_INIT(PROX_CTRL10, SX9310_REG_PROX_CTRL10_HYST_6PCT |
-			     SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_8 |
-			     SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_8),
-	SX_INIT(PROX_CTRL11, 0x00),
-	SX_INIT(PROX_CTRL12, 0x00),
-	SX_INIT(PROX_CTRL13, 0x00),
-	SX_INIT(PROX_CTRL14, 0x00),
-	SX_INIT(PROX_CTRL15, 0x00),
-	SX_INIT(PROX_CTRL16, 0x00),
-	SX_INIT(PROX_CTRL17, 0x00),
-	SX_INIT(PROX_CTRL18, 0x00),
-	SX_INIT(PROX_CTRL19, 0x00),
-	SX_INIT(SAR_CTRL0, SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES |
-			   SX9310_REG_SAR_CTRL0_SARHYST_8),
-	SX_INIT(SAR_CTRL1, SX9310_REG_SAR_CTRL1_SLOPE(10781250)),
-	SX_INIT(SAR_CTRL2, SX9310_REG_SAR_CTRL2_SAROFFSET_DEFAULT),
+	{ SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL0_SCANPERIOD_15MS },
+	{ SX9310_REG_PROX_CTRL1, 0x00 },
+	{ SX9310_REG_PROX_CTRL2, SX9310_REG_PROX_CTRL2_COMBMODE_CS1_CS2 |
+				 SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC },
+	{ SX9310_REG_PROX_CTRL3, SX9310_REG_PROX_CTRL3_GAIN0_X8 |
+				 SX9310_REG_PROX_CTRL3_GAIN12_X4 },
+	{ SX9310_REG_PROX_CTRL4, SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST },
+	{ SX9310_REG_PROX_CTRL5, SX9310_REG_PROX_CTRL5_RANGE_SMALL |
+				 SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1 |
+				 SX9310_REG_PROX_CTRL5_RAWFILT_1P25 },
+	{ SX9310_REG_PROX_CTRL6, SX9310_REG_PROX_CTRL6_AVGTHRESH_DEFAULT },
+	{ SX9310_REG_PROX_CTRL7, SX9310_REG_PROX_CTRL7_AVGNEGFILT_2 |
+				 SX9310_REG_PROX_CTRL7_AVGPOSFILT_512 },
+	{ SX9310_REG_PROX_CTRL8, SX9310_REG_PROX_CTRL8_9_PTHRESH_96 |
+				 SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500 },
+	{ SX9310_REG_PROX_CTRL9, SX9310_REG_PROX_CTRL8_9_PTHRESH_28 |
+				 SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900 },
+	{ SX9310_REG_PROX_CTRL10, SX9310_REG_PROX_CTRL10_HYST_6PCT |
+				  SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_2 },
+	{ SX9310_REG_PROX_CTRL11, 0x00 },
+	{ SX9310_REG_PROX_CTRL12, 0x00 },
+	{ SX9310_REG_PROX_CTRL13, 0x00 },
+	{ SX9310_REG_PROX_CTRL14, 0x00 },
+	{ SX9310_REG_PROX_CTRL15, 0x00 },
+	{ SX9310_REG_PROX_CTRL16, 0x00 },
+	{ SX9310_REG_PROX_CTRL17, 0x00 },
+	{ SX9310_REG_PROX_CTRL18, 0x00 },
+	{ SX9310_REG_PROX_CTRL19, 0x00 },
+	{ SX9310_REG_SAR_CTRL0, SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES |
+				SX9310_REG_SAR_CTRL0_SARHYST_8 },
+	{ SX9310_REG_SAR_CTRL1, SX9310_REG_SAR_CTRL1_SLOPE(10781250) },
+	{ SX9310_REG_SAR_CTRL2, SX9310_REG_SAR_CTRL2_SAROFFSET_DEFAULT },
 };
 
 /* Activate all channels and perform an initial compensation. */
@@ -809,7 +800,7 @@ static int sx9310_init_compensation(struct iio_dev *indio_dev)
 
 	/* run the compensation phase on all channels */
 	ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0,
-			   ctrl0 | SX9310_REG_PROX_CTRL0_EN_MASK);
+			   ctrl0 | SX9310_REG_PROX_CTRL0_SENSOREN_MASK);
 	if (ret < 0)
 		return ret;
 
@@ -992,7 +983,7 @@ static int __maybe_unused sx9310_suspend(struct device *dev)
 	if (ret)
 		goto out;
 
-	ctrl0 = data->suspend_ctrl0 & ~SX9310_REG_PROX_CTRL0_EN_MASK;
+	ctrl0 = data->suspend_ctrl0 & ~SX9310_REG_PROX_CTRL0_SENSOREN_MASK;
 	ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, ctrl0);
 	if (ret)
 		goto out;
-- 
2.28.0.rc0.142.g3c755180ce-goog

Re: [PATCH 02/15] iio: sx9310: Update macros declarations

[Stephen Boyd]

Quoting Daniel Campello (2020-07-28 08:12:45)
> Follows spec sheet for macro declarations.
> 
> Signed-off-by: Daniel Campello <campello@chromium.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

[PATCH 03/15] iio: sx9310: Fix irq handling

[Daniel Campello]

Fixes enable/disable irq handling at various points. The driver needs to
only enable/disable irqs if there is an actual irq handler installed.

Signed-off-by: Daniel Campello <campello@chromium.org>
---

 drivers/iio/proximity/sx9310.c | 24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 07895d4b935d12..76b8bedebeef50 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -376,13 +376,15 @@ static int sx9310_read_proximity(struct sx9310_data *data,
 	if (ret < 0)
 		goto out;
 
-	ret = sx9310_enable_irq(data, SX9310_CONVDONE_IRQ);
-	if (ret < 0)
-		goto out_put_channel;
+	if (data->client->irq) {
+		ret = sx9310_enable_irq(data, SX9310_CONVDONE_IRQ);
+		if (ret)
+			goto out_put_channel;
+	}
 
 	mutex_unlock(&data->mutex);
 
-	if (data->client->irq > 0) {
+	if (data->client->irq) {
 		ret = wait_for_completion_interruptible(&data->completion);
 		reinit_completion(&data->completion);
 	} else {
@@ -401,9 +403,11 @@ static int sx9310_read_proximity(struct sx9310_data *data,
 	*val = sign_extend32(be16_to_cpu(rawval),
 			     (chan->address == SX9310_REG_DIFF_MSB ? 11 : 15));
 
-	ret = sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
-	if (ret < 0)
-		goto out_put_channel;
+	if (data->client->irq) {
+		ret = sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
+		if (ret)
+			goto out_put_channel;
+	}
 
 	ret = sx9310_put_read_channel(data, chan->channel);
 	if (ret < 0)
@@ -414,7 +418,8 @@ static int sx9310_read_proximity(struct sx9310_data *data,
 	return IIO_VAL_INT;
 
 out_disable_irq:
-	sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
+	if (data->client->irq)
+		sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
 out_put_channel:
 	sx9310_put_read_channel(data, chan->channel);
 out:
@@ -1012,7 +1017,8 @@ static int __maybe_unused sx9310_resume(struct device *dev)
 out:
 	mutex_unlock(&data->mutex);
 
-	enable_irq(data->client->irq);
+	if (!ret)
+		enable_irq(data->client->irq);
 
 	return ret;
 }
-- 
2.28.0.rc0.142.g3c755180ce-goog

Re: [PATCH 03/15] iio: sx9310: Fix irq handling

[Andy Shevchenko]

On Tue, Jul 28, 2020 at 6:14 PM Daniel Campello <campello@chromium.org> wrote:
>
> Fixes enable/disable irq handling at various points. The driver needs to
> only enable/disable irqs if there is an actual irq handler installed.

> -       enable_irq(data->client->irq);
> +       if (!ret)
> +               enable_irq(data->client->irq);
>
>         return ret;
>  }

Can it be a usual pattern?

  if (ret)
    return ret;
  ...
  return 0;

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH 03/15] iio: sx9310: Fix irq handling

[Daniel Campello]

On Tue, Jul 28, 2020 at 12:08 PM Andy Shevchenko
<andy.shevchenko@gmail.com> wrote:
>
> On Tue, Jul 28, 2020 at 6:14 PM Daniel Campello <campello@chromium.org> wrote:
> >
> > Fixes enable/disable irq handling at various points. The driver needs to
> > only enable/disable irqs if there is an actual irq handler installed.
>
> > -       enable_irq(data->client->irq);
> > +       if (!ret)
> > +               enable_irq(data->client->irq);
> >
> >         return ret;
> >  }
>
> Can it be a usual pattern?
>
>   if (ret)
>     return ret;
>   ...
>   return 0;

I think this way is more readable. The alternative would have to be
something like this:

....
if (ret)
  goto out;
mutex_unlock(&data->mutex);
enable_irq(data->client->irq);
return 0;

out:
mutex_unlock(&data->mutex);
return ret;

>
> --
> With Best Regards,
> Andy Shevchenko

Regards,
Daniel Campello

Re: [PATCH 03/15] iio: sx9310: Fix irq handling

[Stephen Boyd]

Quoting Daniel Campello (2020-07-28 13:07:00)
> On Tue, Jul 28, 2020 at 12:08 PM Andy Shevchenko
> <andy.shevchenko@gmail.com> wrote:
> >
> > On Tue, Jul 28, 2020 at 6:14 PM Daniel Campello <campello@chromium.org> wrote:
> > >
> > > Fixes enable/disable irq handling at various points. The driver needs to
> > > only enable/disable irqs if there is an actual irq handler installed.
> >
> > > -       enable_irq(data->client->irq);
> > > +       if (!ret)
> > > +               enable_irq(data->client->irq);
> > >
> > >         return ret;
> > >  }
> >
> > Can it be a usual pattern?
> >
> >   if (ret)
> >     return ret;
> >   ...
> >   return 0;
> 
> I think this way is more readable. The alternative would have to be
> something like this:
> 
> ....
> if (ret)
>   goto out;
> mutex_unlock(&data->mutex);
> enable_irq(data->client->irq);
> return 0;
> 
> out:
> mutex_unlock(&data->mutex);
> return ret;
> 

I think the suggestion is

	mutex_unlock(&data->mutex);
	if (ret)
		return ret;

	enable_irq(data->client->irq);

	return 0;

[PATCH 04/15] iio: sx9310: Remove acpi and of table macros

[Daniel Campello]

Avoids unused warnings due to acpi/of table macros.

Signed-off-by: Daniel Campello <campello@chromium.org>
Reported-by: kbuild test robot <lkp@intel.com>
---

 drivers/iio/proximity/sx9310.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 76b8bedebeef50..0fb88ad66f7342 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -16,7 +16,6 @@
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/of.h>
 #include <linux/pm.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
@@ -1051,8 +1050,8 @@ MODULE_DEVICE_TABLE(i2c, sx9310_id);
 static struct i2c_driver sx9310_driver = {
 	.driver = {
 		.name	= "sx9310",
-		.acpi_match_table = ACPI_PTR(sx9310_acpi_match),
-		.of_match_table = of_match_ptr(sx9310_of_match),
+		.acpi_match_table = sx9310_acpi_match,
+		.of_match_table = sx9310_of_match,
 		.pm = &sx9310_pm_ops,
 	},
 	.probe		= sx9310_probe,
-- 
2.28.0.rc0.142.g3c755180ce-goog

Re: [PATCH 04/15] iio: sx9310: Remove acpi and of table macros

[Andy Shevchenko]

On Tue, Jul 28, 2020 at 6:16 PM Daniel Campello <campello@chromium.org> wrote:
>
> Avoids unused warnings due to acpi/of table macros.
>

At the same time I would check if mod_devicetable.h is included.

> Signed-off-by: Daniel Campello <campello@chromium.org>
> Reported-by: kbuild test robot <lkp@intel.com>


-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH 04/15] iio: sx9310: Remove acpi and of table macros

[Daniel Campello]

On Tue, Jul 28, 2020 at 12:09 PM Andy Shevchenko
<andy.shevchenko@gmail.com> wrote:
>
> On Tue, Jul 28, 2020 at 6:16 PM Daniel Campello <campello@chromium.org> wrote:
> >
> > Avoids unused warnings due to acpi/of table macros.
> >
>
> At the same time I would check if mod_devicetable.h is included.
I did the following and no error showed up:
#ifndef LINUX_MOD_DEVICETABLE_H
#error Missing include
#endif

>
> > Signed-off-by: Daniel Campello <campello@chromium.org>
> > Reported-by: kbuild test robot <lkp@intel.com>
>
>
> --
> With Best Regards,
> Andy Shevchenko

Regards,
Daniel Campello

Re: [PATCH 04/15] iio: sx9310: Remove acpi and of table macros

[Stephen Boyd]

Quoting Daniel Campello (2020-07-28 13:47:15)
> On Tue, Jul 28, 2020 at 12:09 PM Andy Shevchenko
> <andy.shevchenko@gmail.com> wrote:
> >
> > On Tue, Jul 28, 2020 at 6:16 PM Daniel Campello <campello@chromium.org> wrote:
> > >
> > > Avoids unused warnings due to acpi/of table macros.
> > >
> >
> > At the same time I would check if mod_devicetable.h is included.
> I did the following and no error showed up:
> #ifndef LINUX_MOD_DEVICETABLE_H
> #error Missing include
> #endif

That's fine, but it's usually better to avoid implicit include
dependencies so that order of includes doesn't matter and so that if the
headers change outside of this driver this driver doesn't have to be
fixed to include something it needs like mod_devicetable.h

[PATCH 05/15] iio: sx9310: Change from .probe to .probe_new

[Daniel Campello]

Uses .probe_new in place of .probe. Also uses device_get_match_data()
for whoami matching.

Signed-off-by: Daniel Campello <campello@chromium.org>
---

 drivers/iio/proximity/sx9310.c | 37 ++++++++++++----------------------
 1 file changed, 13 insertions(+), 24 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 0fb88ad66f7342..de52afd7c13333 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -138,7 +138,7 @@ struct sx9310_data {
 	struct completion completion;
 	unsigned int chan_read, chan_event;
 	int channel_users[SX9310_NUM_CHANNELS];
-	int whoami;
+	unsigned int whoami;
 };
 
 static const struct iio_event_spec sx9310_events[] = {
@@ -859,24 +859,15 @@ static int sx9310_init_device(struct iio_dev *indio_dev)
 
 static int sx9310_set_indio_dev_name(struct device *dev,
 				     struct iio_dev *indio_dev,
-				     const struct i2c_device_id *id, int whoami)
+				     unsigned int whoami)
 {
-	const struct acpi_device_id *acpi_id;
-
-	/* id will be NULL when enumerated via ACPI */
-	if (id) {
-		if (id->driver_data != whoami)
-			dev_err(dev, "WHOAMI does not match i2c_device_id: %s",
-				id->name);
-	} else if (ACPI_HANDLE(dev)) {
-		acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev);
-		if (!acpi_id)
-			return -ENODEV;
-		if (acpi_id->driver_data != whoami)
-			dev_err(dev, "WHOAMI does not match acpi_device_id: %s",
-				acpi_id->id);
-	} else
+	unsigned int long ddata;
+
+	ddata = (uintptr_t)device_get_match_data(dev);
+	if (ddata != whoami) {
+		dev_err(dev, "WHOAMI does not match device data: %u", whoami);
 		return -ENODEV;
+	}
 
 	switch (whoami) {
 	case SX9310_WHOAMI_VALUE:
@@ -893,8 +884,7 @@ static int sx9310_set_indio_dev_name(struct device *dev,
 	return 0;
 }
 
-static int sx9310_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int sx9310_probe(struct i2c_client *client)
 {
 	int ret;
 	struct iio_dev *indio_dev;
@@ -920,8 +910,7 @@ static int sx9310_probe(struct i2c_client *client,
 		return ret;
 	}
 
-	ret = sx9310_set_indio_dev_name(&client->dev, indio_dev, id,
-					data->whoami);
+	ret = sx9310_set_indio_dev_name(&client->dev, indio_dev, data->whoami);
 	if (ret < 0)
 		return ret;
 
@@ -1034,8 +1023,8 @@ static const struct acpi_device_id sx9310_acpi_match[] = {
 MODULE_DEVICE_TABLE(acpi, sx9310_acpi_match);
 
 static const struct of_device_id sx9310_of_match[] = {
-	{ .compatible = "semtech,sx9310" },
-	{ .compatible = "semtech,sx9311" },
+	{ .compatible = "semtech,sx9310", (void *)SX9310_WHOAMI_VALUE },
+	{ .compatible = "semtech,sx9311", (void *)SX9311_WHOAMI_VALUE },
 	{},
 };
 MODULE_DEVICE_TABLE(of, sx9310_of_match);
@@ -1054,7 +1043,7 @@ static struct i2c_driver sx9310_driver = {
 		.of_match_table = sx9310_of_match,
 		.pm = &sx9310_pm_ops,
 	},
-	.probe		= sx9310_probe,
+	.probe_new	= sx9310_probe,
 	.id_table	= sx9310_id,
 };
 module_i2c_driver(sx9310_driver);
-- 
2.28.0.rc0.142.g3c755180ce-goog

Re: [PATCH 05/15] iio: sx9310: Change from .probe to .probe_new

[Andy Shevchenko]

On Tue, Jul 28, 2020 at 6:15 PM Daniel Campello <campello@chromium.org> wrote:
>
> Uses .probe_new in place of .probe. Also uses device_get_match_data()
> for whoami matching.

Good one!
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Signed-off-by: Daniel Campello <campello@chromium.org>
> ---
>
>  drivers/iio/proximity/sx9310.c | 37 ++++++++++++----------------------
>  1 file changed, 13 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
> index 0fb88ad66f7342..de52afd7c13333 100644
> --- a/drivers/iio/proximity/sx9310.c
> +++ b/drivers/iio/proximity/sx9310.c
> @@ -138,7 +138,7 @@ struct sx9310_data {
>         struct completion completion;
>         unsigned int chan_read, chan_event;
>         int channel_users[SX9310_NUM_CHANNELS];
> -       int whoami;
> +       unsigned int whoami;
>  };
>
>  static const struct iio_event_spec sx9310_events[] = {
> @@ -859,24 +859,15 @@ static int sx9310_init_device(struct iio_dev *indio_dev)
>
>  static int sx9310_set_indio_dev_name(struct device *dev,
>                                      struct iio_dev *indio_dev,
> -                                    const struct i2c_device_id *id, int whoami)
> +                                    unsigned int whoami)
>  {
> -       const struct acpi_device_id *acpi_id;
> -
> -       /* id will be NULL when enumerated via ACPI */
> -       if (id) {
> -               if (id->driver_data != whoami)
> -                       dev_err(dev, "WHOAMI does not match i2c_device_id: %s",
> -                               id->name);
> -       } else if (ACPI_HANDLE(dev)) {
> -               acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev);
> -               if (!acpi_id)
> -                       return -ENODEV;
> -               if (acpi_id->driver_data != whoami)
> -                       dev_err(dev, "WHOAMI does not match acpi_device_id: %s",
> -                               acpi_id->id);
> -       } else
> +       unsigned int long ddata;
> +
> +       ddata = (uintptr_t)device_get_match_data(dev);
> +       if (ddata != whoami) {
> +               dev_err(dev, "WHOAMI does not match device data: %u", whoami);
>                 return -ENODEV;
> +       }
>
>         switch (whoami) {
>         case SX9310_WHOAMI_VALUE:
> @@ -893,8 +884,7 @@ static int sx9310_set_indio_dev_name(struct device *dev,
>         return 0;
>  }
>
> -static int sx9310_probe(struct i2c_client *client,
> -                       const struct i2c_device_id *id)
> +static int sx9310_probe(struct i2c_client *client)
>  {
>         int ret;
>         struct iio_dev *indio_dev;
> @@ -920,8 +910,7 @@ static int sx9310_probe(struct i2c_client *client,
>                 return ret;
>         }
>
> -       ret = sx9310_set_indio_dev_name(&client->dev, indio_dev, id,
> -                                       data->whoami);
> +       ret = sx9310_set_indio_dev_name(&client->dev, indio_dev, data->whoami);
>         if (ret < 0)
>                 return ret;
>
> @@ -1034,8 +1023,8 @@ static const struct acpi_device_id sx9310_acpi_match[] = {
>  MODULE_DEVICE_TABLE(acpi, sx9310_acpi_match);
>
>  static const struct of_device_id sx9310_of_match[] = {
> -       { .compatible = "semtech,sx9310" },
> -       { .compatible = "semtech,sx9311" },
> +       { .compatible = "semtech,sx9310", (void *)SX9310_WHOAMI_VALUE },
> +       { .compatible = "semtech,sx9311", (void *)SX9311_WHOAMI_VALUE },
>         {},
>  };
>  MODULE_DEVICE_TABLE(of, sx9310_of_match);
> @@ -1054,7 +1043,7 @@ static struct i2c_driver sx9310_driver = {
>                 .of_match_table = sx9310_of_match,
>                 .pm = &sx9310_pm_ops,
>         },
> -       .probe          = sx9310_probe,
> +       .probe_new      = sx9310_probe,
>         .id_table       = sx9310_id,
>  };
>  module_i2c_driver(sx9310_driver);
> --
> 2.28.0.rc0.142.g3c755180ce-goog
>


-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH 05/15] iio: sx9310: Change from .probe to .probe_new

[Stephen Boyd]

Quoting Daniel Campello (2020-07-28 08:12:48)
> Uses .probe_new in place of .probe. Also uses device_get_match_data()
> for whoami matching.
> 
> Signed-off-by: Daniel Campello <campello@chromium.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

[PATCH 06/15] iio: sx9310: Align memory

[Daniel Campello]

Use __aligned(8) to ensure that the timestamp is correctly aligned
when we call push_to_buffers

Signed-off-by: Daniel Campello <campello@chromium.org>
---

 drivers/iio/proximity/sx9310.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index de52afd7c13333..fb5c16f2aa6b1a 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -131,8 +131,8 @@ struct sx9310_data {
 	 */
 	bool prox_stat[SX9310_NUM_CHANNELS];
 	bool trigger_enabled;
-	__be16 buffer[SX9310_NUM_CHANNELS +
-		      4]; /* 64-bit data + 64-bit timestamp */
+	/* 64-bit data + 64-bit timestamp buffer */
+	__be16 buffer[SX9310_NUM_CHANNELS + 4] __aligned(8);
 	/* Remember enabled channels and sample rate during suspend. */
 	unsigned int suspend_ctrl0;
 	struct completion completion;
@@ -339,7 +339,7 @@ static int sx9310_read_prox_data(struct sx9310_data *data,
 	if (ret < 0)
 		return ret;
 
-	return regmap_bulk_read(data->regmap, chan->address, val, 2);
+	return regmap_bulk_read(data->regmap, chan->address, val, sizeof(*val));
 }
 
 /*
-- 
2.28.0.rc0.142.g3c755180ce-goog

Re: [PATCH 06/15] iio: sx9310: Align memory

[Andy Shevchenko]

On Tue, Jul 28, 2020 at 6:15 PM Daniel Campello <campello@chromium.org> wrote:
>
> Use __aligned(8) to ensure that the timestamp is correctly aligned
> when we call push_to_buffers
>
> Signed-off-by: Daniel Campello <campello@chromium.org>
> ---
>
>  drivers/iio/proximity/sx9310.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
> index de52afd7c13333..fb5c16f2aa6b1a 100644
> --- a/drivers/iio/proximity/sx9310.c
> +++ b/drivers/iio/proximity/sx9310.c
> @@ -131,8 +131,8 @@ struct sx9310_data {
>          */
>         bool prox_stat[SX9310_NUM_CHANNELS];
>         bool trigger_enabled;
> -       __be16 buffer[SX9310_NUM_CHANNELS +
> -                     4]; /* 64-bit data + 64-bit timestamp */
> +       /* 64-bit data + 64-bit timestamp buffer */
> +       __be16 buffer[SX9310_NUM_CHANNELS + 4] __aligned(8);

If the data amount (channels) is always the same, please, use struct approach.
Otherwise put a comment explaining dynamic data.

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH 06/15] iio: sx9310: Align memory

[Daniel Campello]

On Tue, Jul 28, 2020 at 12:11 PM Andy Shevchenko
<andy.shevchenko@gmail.com> wrote:
>
> On Tue, Jul 28, 2020 at 6:15 PM Daniel Campello <campello@chromium.org> wrote:
> >
> > Use __aligned(8) to ensure that the timestamp is correctly aligned
> > when we call push_to_buffers
> >
> > Signed-off-by: Daniel Campello <campello@chromium.org>
> > ---
> >
> >  drivers/iio/proximity/sx9310.c | 6 +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
> > index de52afd7c13333..fb5c16f2aa6b1a 100644
> > --- a/drivers/iio/proximity/sx9310.c
> > +++ b/drivers/iio/proximity/sx9310.c
> > @@ -131,8 +131,8 @@ struct sx9310_data {
> >          */
> >         bool prox_stat[SX9310_NUM_CHANNELS];
> >         bool trigger_enabled;
> > -       __be16 buffer[SX9310_NUM_CHANNELS +
> > -                     4]; /* 64-bit data + 64-bit timestamp */
> > +       /* 64-bit data + 64-bit timestamp buffer */
> > +       __be16 buffer[SX9310_NUM_CHANNELS + 4] __aligned(8);
>
> If the data amount (channels) is always the same, please, use struct approach.
> Otherwise put a comment explaining dynamic data.
I'm not sure what you mean here. I have a comment above for the size
of the array.
>
> --
> With Best Regards,
> Andy Shevchenko

Re: [PATCH 06/15] iio: sx9310: Align memory

[Andy Shevchenko]

On Wed, Jul 29, 2020 at 12:26 AM Daniel Campello <campello@google.com> wrote:
> On Tue, Jul 28, 2020 at 12:11 PM Andy Shevchenko
> <andy.shevchenko@gmail.com> wrote:
> > On Tue, Jul 28, 2020 at 6:15 PM Daniel Campello <campello@chromium.org> wrote:

...

> > > -       __be16 buffer[SX9310_NUM_CHANNELS +
> > > -                     4]; /* 64-bit data + 64-bit timestamp */
> > > +       /* 64-bit data + 64-bit timestamp buffer */
> > > +       __be16 buffer[SX9310_NUM_CHANNELS + 4] __aligned(8);
> >
> > If the data amount (channels) is always the same, please, use struct approach.
> > Otherwise put a comment explaining dynamic data.
> I'm not sure what you mean here. I have a comment above for the size
> of the array.

Here [1] was a discussion about commenting on the dynamic amount of
data [see the cover letter and replies to it] in the buffer and the
struct approach [e.g. very first patch in the series].

[1]: https://lore.kernel.org/linux-iio/MN2PR12MB43905A2256F98BB5EFCE7DD3C4770@MN2PR12MB4390.namprd12.prod.outlook.com/T/

-- 
With Best Regards,
Andy Shevchenko

[PATCH 07/15] iio: sx9310: Use long instead of int for channel bitmaps

[Daniel Campello]

Uses for_each_set_bit() macro to loop over channel bitmaps.

Signed-off-by: Daniel Campello <campello@chromium.org>
---

 drivers/iio/proximity/sx9310.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index fb5c16f2aa6b1a..2465064971d0a7 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -136,7 +136,8 @@ struct sx9310_data {
 	/* Remember enabled channels and sample rate during suspend. */
 	unsigned int suspend_ctrl0;
 	struct completion completion;
-	unsigned int chan_read, chan_event;
+	unsigned long chan_read;
+	unsigned long chan_event;
 	int channel_users[SX9310_NUM_CHANNELS];
 	unsigned int whoami;
 };
@@ -279,15 +280,16 @@ static const struct regmap_config sx9310_regmap_config = {
 };
 
 static int sx9310_update_chan_en(struct sx9310_data *data,
-				 unsigned int chan_read,
-				 unsigned int chan_event)
+				 unsigned long chan_read,
+				 unsigned long chan_event)
 {
 	int ret;
+	unsigned long channels = chan_read | chan_event;
 
-	if ((data->chan_read | data->chan_event) != (chan_read | chan_event)) {
+	if ((data->chan_read | data->chan_event) != channels) {
 		ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL0,
 					 SX9310_REG_PROX_CTRL0_SENSOREN_MASK,
-					 chan_read | chan_event);
+					 channels);
 		if (ret)
 			return ret;
 	}
@@ -538,13 +540,13 @@ static void sx9310_push_events(struct iio_dev *indio_dev)
 		return;
 	}
 
-	for (chan = 0; chan < SX9310_NUM_CHANNELS; chan++) {
+	for_each_set_bit(chan, &data->chan_event, SX9310_NUM_CHANNELS) {
 		int dir;
 		u64 ev;
-		bool new_prox = val & BIT(chan);
+		bool new_prox;
+
+		new_prox = val & BIT(chan);
 
-		if (!(data->chan_event & BIT(chan)))
-			continue;
 		if (new_prox == data->prox_stat[chan])
 			/* No change on this channel. */
 			continue;
@@ -712,13 +714,13 @@ static irqreturn_t sx9310_trigger_handler(int irq, void *private)
 static int sx9310_buffer_preenable(struct iio_dev *indio_dev)
 {
 	struct sx9310_data *data = iio_priv(indio_dev);
-	unsigned int channels = 0;
+	unsigned long channels = 0;
 	int bit, ret;
 
 	mutex_lock(&data->mutex);
 	for_each_set_bit(bit, indio_dev->active_scan_mask,
 			 indio_dev->masklength)
-		channels |= BIT(indio_dev->channels[bit].channel);
+		__set_bit(indio_dev->channels[bit].channel, &channels);
 
 	ret = sx9310_update_chan_en(data, channels, data->chan_event);
 	mutex_unlock(&data->mutex);
-- 
2.28.0.rc0.142.g3c755180ce-goog

Re: [PATCH 07/15] iio: sx9310: Use long instead of int for channel bitmaps

[Andy Shevchenko]

On Tue, Jul 28, 2020 at 6:14 PM Daniel Campello <campello@chromium.org> wrote:
>
> Uses for_each_set_bit() macro to loop over channel bitmaps.
>

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Signed-off-by: Daniel Campello <campello@chromium.org>
> ---
>
>  drivers/iio/proximity/sx9310.c | 24 +++++++++++++-----------
>  1 file changed, 13 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
> index fb5c16f2aa6b1a..2465064971d0a7 100644
> --- a/drivers/iio/proximity/sx9310.c
> +++ b/drivers/iio/proximity/sx9310.c
> @@ -136,7 +136,8 @@ struct sx9310_data {
>         /* Remember enabled channels and sample rate during suspend. */
>         unsigned int suspend_ctrl0;
>         struct completion completion;
> -       unsigned int chan_read, chan_event;
> +       unsigned long chan_read;
> +       unsigned long chan_event;
>         int channel_users[SX9310_NUM_CHANNELS];
>         unsigned int whoami;
>  };
> @@ -279,15 +280,16 @@ static const struct regmap_config sx9310_regmap_config = {
>  };
>
>  static int sx9310_update_chan_en(struct sx9310_data *data,
> -                                unsigned int chan_read,
> -                                unsigned int chan_event)
> +                                unsigned long chan_read,
> +                                unsigned long chan_event)
>  {
>         int ret;
> +       unsigned long channels = chan_read | chan_event;
>
> -       if ((data->chan_read | data->chan_event) != (chan_read | chan_event)) {
> +       if ((data->chan_read | data->chan_event) != channels) {
>                 ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL0,
>                                          SX9310_REG_PROX_CTRL0_SENSOREN_MASK,
> -                                        chan_read | chan_event);
> +                                        channels);
>                 if (ret)
>                         return ret;
>         }
> @@ -538,13 +540,13 @@ static void sx9310_push_events(struct iio_dev *indio_dev)
>                 return;
>         }
>
> -       for (chan = 0; chan < SX9310_NUM_CHANNELS; chan++) {
> +       for_each_set_bit(chan, &data->chan_event, SX9310_NUM_CHANNELS) {
>                 int dir;
>                 u64 ev;
> -               bool new_prox = val & BIT(chan);
> +               bool new_prox;
> +
> +               new_prox = val & BIT(chan);
>
> -               if (!(data->chan_event & BIT(chan)))
> -                       continue;
>                 if (new_prox == data->prox_stat[chan])
>                         /* No change on this channel. */
>                         continue;
> @@ -712,13 +714,13 @@ static irqreturn_t sx9310_trigger_handler(int irq, void *private)
>  static int sx9310_buffer_preenable(struct iio_dev *indio_dev)
>  {
>         struct sx9310_data *data = iio_priv(indio_dev);
> -       unsigned int channels = 0;
> +       unsigned long channels = 0;
>         int bit, ret;
>
>         mutex_lock(&data->mutex);
>         for_each_set_bit(bit, indio_dev->active_scan_mask,
>                          indio_dev->masklength)
> -               channels |= BIT(indio_dev->channels[bit].channel);
> +               __set_bit(indio_dev->channels[bit].channel, &channels);
>
>         ret = sx9310_update_chan_en(data, channels, data->chan_event);
>         mutex_unlock(&data->mutex);
> --
> 2.28.0.rc0.142.g3c755180ce-goog
>


-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH 07/15] iio: sx9310: Use long instead of int for channel bitmaps

[Stephen Boyd]

Quoting Daniel Campello (2020-07-28 08:12:50)
> diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
> index fb5c16f2aa6b1a..2465064971d0a7 100644
> --- a/drivers/iio/proximity/sx9310.c
> +++ b/drivers/iio/proximity/sx9310.c
> @@ -538,13 +540,13 @@ static void sx9310_push_events(struct iio_dev *indio_dev)
>                 return;
>         }
>  
> -       for (chan = 0; chan < SX9310_NUM_CHANNELS; chan++) {
> +       for_each_set_bit(chan, &data->chan_event, SX9310_NUM_CHANNELS) {
>                 int dir;
>                 u64 ev;
> -               bool new_prox = val & BIT(chan);
> +               bool new_prox;
> +
> +               new_prox = val & BIT(chan);
>  
> -               if (!(data->chan_event & BIT(chan)))
> -                       continue;
>                 if (new_prox == data->prox_stat[chan])

Why not make 'prox_stat' a bitmap too and then xor them to iterate over
that bitmap instead?

>                         /* No change on this channel. */
>                         continue;

[PATCH 08/15] iio: sx9310: Use regmap_read_poll_timeout() for compensation

[Daniel Campello]

Simplify compensation stage by using regmap_read_poll_timeout().

Signed-off-by: Daniel Campello <campello@chromium.org>
---

 drivers/iio/proximity/sx9310.c | 25 ++++++++++---------------
 1 file changed, 10 insertions(+), 15 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 2465064971d0a7..3956fd679c6db9 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -796,7 +796,7 @@ static const struct sx9310_reg_default sx9310_default_regs[] = {
 static int sx9310_init_compensation(struct iio_dev *indio_dev)
 {
 	struct sx9310_data *data = iio_priv(indio_dev);
-	int i, ret;
+	int ret;
 	unsigned int val;
 	unsigned int ctrl0;
 
@@ -810,22 +810,17 @@ static int sx9310_init_compensation(struct iio_dev *indio_dev)
 	if (ret < 0)
 		return ret;
 
-	for (i = 100; i >= 0; i--) {
-		msleep(20);
-		ret = regmap_read(data->regmap, SX9310_REG_STAT1, &val);
-		if (ret < 0)
-			goto out;
-		if (!(val & SX9310_COMPSTAT_MASK))
-			break;
-	}
-
-	if (i < 0) {
-		dev_err(&data->client->dev,
-			"initial compensation timed out: 0x%02x", val);
-		ret = -ETIMEDOUT;
+	ret = regmap_read_poll_timeout(data->regmap, SX9310_REG_STAT1, val,
+				       !(val & SX9310_REG_STAT1_COMPSTAT_MASK),
+				       20000, 2000000);
+	if (ret) {
+		if (ret == -ETIMEDOUT)
+			dev_err(&data->client->dev,
+				"0x02 << 3l compensation timed out: 0x%02x",
+				val);
+		return ret;
 	}
 
-out:
 	regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, ctrl0);
 	return ret;
 }
-- 
2.28.0.rc0.142.g3c755180ce-goog

Re: [PATCH 08/15] iio: sx9310: Use regmap_read_poll_timeout() for compensation

[Andy Shevchenko]

On Tue, Jul 28, 2020 at 6:15 PM Daniel Campello <campello@chromium.org> wrote:
>
> Simplify compensation stage by using regmap_read_poll_timeout().

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Signed-off-by: Daniel Campello <campello@chromium.org>
> ---
>
>  drivers/iio/proximity/sx9310.c | 25 ++++++++++---------------
>  1 file changed, 10 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
> index 2465064971d0a7..3956fd679c6db9 100644
> --- a/drivers/iio/proximity/sx9310.c
> +++ b/drivers/iio/proximity/sx9310.c
> @@ -796,7 +796,7 @@ static const struct sx9310_reg_default sx9310_default_regs[] = {
>  static int sx9310_init_compensation(struct iio_dev *indio_dev)
>  {
>         struct sx9310_data *data = iio_priv(indio_dev);
> -       int i, ret;
> +       int ret;
>         unsigned int val;
>         unsigned int ctrl0;
>
> @@ -810,22 +810,17 @@ static int sx9310_init_compensation(struct iio_dev *indio_dev)
>         if (ret < 0)
>                 return ret;
>
> -       for (i = 100; i >= 0; i--) {
> -               msleep(20);
> -               ret = regmap_read(data->regmap, SX9310_REG_STAT1, &val);
> -               if (ret < 0)
> -                       goto out;
> -               if (!(val & SX9310_COMPSTAT_MASK))
> -                       break;
> -       }
> -
> -       if (i < 0) {
> -               dev_err(&data->client->dev,
> -                       "initial compensation timed out: 0x%02x", val);
> -               ret = -ETIMEDOUT;
> +       ret = regmap_read_poll_timeout(data->regmap, SX9310_REG_STAT1, val,
> +                                      !(val & SX9310_REG_STAT1_COMPSTAT_MASK),
> +                                      20000, 2000000);
> +       if (ret) {
> +               if (ret == -ETIMEDOUT)
> +                       dev_err(&data->client->dev,
> +                               "0x02 << 3l compensation timed out: 0x%02x",
> +                               val);
> +               return ret;
>         }
>
> -out:
>         regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, ctrl0);
>         return ret;
>  }
> --
> 2.28.0.rc0.142.g3c755180ce-goog
>


-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH 08/15] iio: sx9310: Use regmap_read_poll_timeout() for compensation

[Stephen Boyd]

Quoting Daniel Campello (2020-07-28 08:12:51)
> diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
> index 2465064971d0a7..3956fd679c6db9 100644
> --- a/drivers/iio/proximity/sx9310.c
> +++ b/drivers/iio/proximity/sx9310.c
> @@ -810,22 +810,17 @@ static int sx9310_init_compensation(struct iio_dev *indio_dev)
>         if (ret < 0)
>                 return ret;
>  
> -       for (i = 100; i >= 0; i--) {
> -               msleep(20);
> -               ret = regmap_read(data->regmap, SX9310_REG_STAT1, &val);
> -               if (ret < 0)
> -                       goto out;
> -               if (!(val & SX9310_COMPSTAT_MASK))
> -                       break;
> -       }
> -
> -       if (i < 0) {
> -               dev_err(&data->client->dev,
> -                       "initial compensation timed out: 0x%02x", val);
> -               ret = -ETIMEDOUT;
> +       ret = regmap_read_poll_timeout(data->regmap, SX9310_REG_STAT1, val,
> +                                      !(val & SX9310_REG_STAT1_COMPSTAT_MASK),
> +                                      20000, 2000000);
> +       if (ret) {
> +               if (ret == -ETIMEDOUT)
> +                       dev_err(&data->client->dev,
> +                               "0x02 << 3l compensation timed out: 0x%02x",

What does 0x02 << 3l mean?

> +                               val);
> +               return ret;
>         }
>

[PATCH 09/15] iio: sx9310: Update copyright

[Daniel Campello]

Fixes wrong copyright year.

Signed-off-by: Daniel Campello <campello@chromium.org>
---

 drivers/iio/proximity/sx9310.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 3956fd679c6db9..31234691a31abf 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -1,13 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright 2018 Google LLC.
+ * Copyright 2020 Google LLC.
  *
  * Driver for Semtech's SX9310/SX9311 capacitive proximity/button solution.
  * Based on SX9500 driver and Semtech driver using the input framework
  * <https://my.syncplicity.com/share/teouwsim8niiaud/
  *          linux-driver-SX9310_NoSmartHSensing>.
- * Reworked April 2019 by Evan Green <evgreen@chromium.org>
- * and January 2020 by Daniel Campello <campello@chromium.org>
+ * Reworked in April 2019 by Evan Green <evgreen@chromium.org>
+ * and in January 2020 by Daniel Campello <campello@chromium.org>.
  */
 
 #include <linux/acpi.h>
-- 
2.28.0.rc0.142.g3c755180ce-goog

[PATCH 10/15] iio: sx9310: Simplify error return handling

[Daniel Campello]

Checks for non-zero return values to signal error conditions.

Signed-off-by: Daniel Campello <campello@chromium.org>
---

 drivers/iio/proximity/sx9310.c | 52 +++++++++++++++++-----------------
 1 file changed, 26 insertions(+), 26 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 31234691a31abf..051c6515e62c18 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -338,7 +338,7 @@ static int sx9310_read_prox_data(struct sx9310_data *data,
 	int ret;
 
 	ret = regmap_write(data->regmap, SX9310_REG_SENSOR_SEL, chan->channel);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	return regmap_bulk_read(data->regmap, chan->address, val, sizeof(*val));
@@ -354,7 +354,7 @@ static int sx9310_wait_for_sample(struct sx9310_data *data)
 	unsigned int val;
 
 	ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &val);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	val = (val & SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK) >>
@@ -368,13 +368,13 @@ static int sx9310_wait_for_sample(struct sx9310_data *data)
 static int sx9310_read_proximity(struct sx9310_data *data,
 				 const struct iio_chan_spec *chan, int *val)
 {
-	int ret = 0;
+	int ret;
 	__be16 rawval;
 
 	mutex_lock(&data->mutex);
 
 	ret = sx9310_get_read_channel(data, chan->channel);
-	if (ret < 0)
+	if (ret)
 		goto out;
 
 	if (data->client->irq) {
@@ -394,11 +394,11 @@ static int sx9310_read_proximity(struct sx9310_data *data,
 
 	mutex_lock(&data->mutex);
 
-	if (ret < 0)
+	if (ret)
 		goto out_disable_irq;
 
 	ret = sx9310_read_prox_data(data, chan, &rawval);
-	if (ret < 0)
+	if (ret)
 		goto out_disable_irq;
 
 	*val = sign_extend32(be16_to_cpu(rawval),
@@ -411,7 +411,7 @@ static int sx9310_read_proximity(struct sx9310_data *data,
 	}
 
 	ret = sx9310_put_read_channel(data, chan->channel);
-	if (ret < 0)
+	if (ret)
 		goto out;
 
 	mutex_unlock(&data->mutex);
@@ -434,7 +434,7 @@ static int sx9310_read_samp_freq(struct sx9310_data *data, int *val, int *val2)
 	unsigned int regval;
 	int ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &regval);
 
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	regval = (regval & SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK) >>
@@ -535,7 +535,7 @@ static void sx9310_push_events(struct iio_dev *indio_dev)
 
 	/* Read proximity state on all channels */
 	ret = regmap_read(data->regmap, SX9310_REG_STAT0, &val);
-	if (ret < 0) {
+	if (ret) {
 		dev_err(&data->client->dev, "i2c transfer error in irq\n");
 		return;
 	}
@@ -570,7 +570,7 @@ static irqreturn_t sx9310_irq_thread_handler(int irq, void *private)
 	mutex_lock(&data->mutex);
 
 	ret = regmap_read(data->regmap, SX9310_REG_IRQ_SRC, &val);
-	if (ret < 0) {
+	if (ret) {
 		dev_err(&data->client->dev, "i2c transfer error in irq\n");
 		goto out;
 	}
@@ -613,20 +613,20 @@ static int sx9310_write_event_config(struct iio_dev *indio_dev,
 	mutex_lock(&data->mutex);
 	if (state) {
 		ret = sx9310_get_event_channel(data, chan->channel);
-		if (ret < 0)
+		if (ret)
 			goto out_unlock;
 		if (!(data->chan_event & ~BIT(chan->channel))) {
 			ret = sx9310_enable_irq(data, eventirq);
-			if (ret < 0)
+			if (ret)
 				sx9310_put_event_channel(data, chan->channel);
 		}
 	} else {
 		ret = sx9310_put_event_channel(data, chan->channel);
-		if (ret < 0)
+		if (ret)
 			goto out_unlock;
 		if (!data->chan_event) {
 			ret = sx9310_disable_irq(data, eventirq);
-			if (ret < 0)
+			if (ret)
 				sx9310_get_event_channel(data, chan->channel);
 		}
 	}
@@ -665,7 +665,7 @@ static int sx9310_set_trigger_state(struct iio_trigger *trig, bool state)
 		ret = sx9310_enable_irq(data, SX9310_CONVDONE_IRQ);
 	else if (!data->chan_read)
 		ret = sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
-	if (ret < 0)
+	if (ret)
 		goto out;
 
 	data->trigger_enabled = state;
@@ -694,7 +694,7 @@ static irqreturn_t sx9310_trigger_handler(int irq, void *private)
 			 indio_dev->masklength) {
 		ret = sx9310_read_prox_data(data, &indio_dev->channels[bit],
 					    &val);
-		if (ret < 0)
+		if (ret)
 			goto out;
 
 		data->buffer[i++] = val;
@@ -801,13 +801,13 @@ static int sx9310_init_compensation(struct iio_dev *indio_dev)
 	unsigned int ctrl0;
 
 	ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &ctrl0);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	/* run the compensation phase on all channels */
 	ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0,
 			   ctrl0 | SX9310_REG_PROX_CTRL0_SENSOREN_MASK);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	ret = regmap_read_poll_timeout(data->regmap, SX9310_REG_STAT1, val,
@@ -833,21 +833,21 @@ static int sx9310_init_device(struct iio_dev *indio_dev)
 	unsigned int i, val;
 
 	ret = regmap_write(data->regmap, SX9310_REG_RESET, SX9310_SOFT_RESET);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	usleep_range(1000, 2000); /* power-up time is ~1ms. */
 
 	/* Clear reset interrupt state by reading SX9310_REG_IRQ_SRC. */
 	ret = regmap_read(data->regmap, SX9310_REG_IRQ_SRC, &val);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	/* Program some sane defaults. */
 	for (i = 0; i < ARRAY_SIZE(sx9310_default_regs); i++) {
 		initval = &sx9310_default_regs[i];
 		ret = regmap_write(data->regmap, initval->reg, initval->def);
-		if (ret < 0)
+		if (ret)
 			return ret;
 	}
 
@@ -901,14 +901,14 @@ static int sx9310_probe(struct i2c_client *client)
 		return PTR_ERR(data->regmap);
 
 	ret = regmap_read(data->regmap, SX9310_REG_WHOAMI, &data->whoami);
-	if (ret < 0) {
+	if (ret) {
 		dev_err(&client->dev, "error in reading WHOAMI register: %d",
 			ret);
 		return ret;
 	}
 
 	ret = sx9310_set_indio_dev_name(&client->dev, indio_dev, data->whoami);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	ACPI_COMPANION_SET(&indio_dev->dev, ACPI_COMPANION(&client->dev));
@@ -920,7 +920,7 @@ static int sx9310_probe(struct i2c_client *client)
 	i2c_set_clientdata(client, indio_dev);
 
 	ret = sx9310_init_device(indio_dev);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	if (client->irq) {
@@ -929,7 +929,7 @@ static int sx9310_probe(struct i2c_client *client)
 						sx9310_irq_thread_handler,
 						IRQF_TRIGGER_LOW | IRQF_ONESHOT,
 						"sx9310_event", indio_dev);
-		if (ret < 0)
+		if (ret)
 			return ret;
 
 		data->trig =
@@ -951,7 +951,7 @@ static int sx9310_probe(struct i2c_client *client)
 					      iio_pollfunc_store_time,
 					      sx9310_trigger_handler,
 					      &sx9310_buffer_setup_ops);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	return devm_iio_device_register(&client->dev, indio_dev);
-- 
2.28.0.rc0.142.g3c755180ce-goog

Re: [PATCH 10/15] iio: sx9310: Simplify error return handling

[Andy Shevchenko]

On Tue, Jul 28, 2020 at 6:14 PM Daniel Campello <campello@chromium.org> wrote:
>
> Checks for non-zero return values to signal error conditions.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Signed-off-by: Daniel Campello <campello@chromium.org>
> ---
>
>  drivers/iio/proximity/sx9310.c | 52 +++++++++++++++++-----------------
>  1 file changed, 26 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
> index 31234691a31abf..051c6515e62c18 100644
> --- a/drivers/iio/proximity/sx9310.c
> +++ b/drivers/iio/proximity/sx9310.c
> @@ -338,7 +338,7 @@ static int sx9310_read_prox_data(struct sx9310_data *data,
>         int ret;
>
>         ret = regmap_write(data->regmap, SX9310_REG_SENSOR_SEL, chan->channel);
> -       if (ret < 0)
> +       if (ret)
>                 return ret;
>
>         return regmap_bulk_read(data->regmap, chan->address, val, sizeof(*val));
> @@ -354,7 +354,7 @@ static int sx9310_wait_for_sample(struct sx9310_data *data)
>         unsigned int val;
>
>         ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &val);
> -       if (ret < 0)
> +       if (ret)
>                 return ret;
>
>         val = (val & SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK) >>
> @@ -368,13 +368,13 @@ static int sx9310_wait_for_sample(struct sx9310_data *data)
>  static int sx9310_read_proximity(struct sx9310_data *data,
>                                  const struct iio_chan_spec *chan, int *val)
>  {
> -       int ret = 0;
> +       int ret;
>         __be16 rawval;
>
>         mutex_lock(&data->mutex);
>
>         ret = sx9310_get_read_channel(data, chan->channel);
> -       if (ret < 0)
> +       if (ret)
>                 goto out;
>
>         if (data->client->irq) {
> @@ -394,11 +394,11 @@ static int sx9310_read_proximity(struct sx9310_data *data,
>
>         mutex_lock(&data->mutex);
>
> -       if (ret < 0)
> +       if (ret)
>                 goto out_disable_irq;
>
>         ret = sx9310_read_prox_data(data, chan, &rawval);
> -       if (ret < 0)
> +       if (ret)
>                 goto out_disable_irq;
>
>         *val = sign_extend32(be16_to_cpu(rawval),
> @@ -411,7 +411,7 @@ static int sx9310_read_proximity(struct sx9310_data *data,
>         }
>
>         ret = sx9310_put_read_channel(data, chan->channel);
> -       if (ret < 0)
> +       if (ret)
>                 goto out;
>
>         mutex_unlock(&data->mutex);
> @@ -434,7 +434,7 @@ static int sx9310_read_samp_freq(struct sx9310_data *data, int *val, int *val2)
>         unsigned int regval;
>         int ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &regval);
>
> -       if (ret < 0)
> +       if (ret)
>                 return ret;
>
>         regval = (regval & SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK) >>
> @@ -535,7 +535,7 @@ static void sx9310_push_events(struct iio_dev *indio_dev)
>
>         /* Read proximity state on all channels */
>         ret = regmap_read(data->regmap, SX9310_REG_STAT0, &val);
> -       if (ret < 0) {
> +       if (ret) {
>                 dev_err(&data->client->dev, "i2c transfer error in irq\n");
>                 return;
>         }
> @@ -570,7 +570,7 @@ static irqreturn_t sx9310_irq_thread_handler(int irq, void *private)
>         mutex_lock(&data->mutex);
>
>         ret = regmap_read(data->regmap, SX9310_REG_IRQ_SRC, &val);
> -       if (ret < 0) {
> +       if (ret) {
>                 dev_err(&data->client->dev, "i2c transfer error in irq\n");
>                 goto out;
>         }
> @@ -613,20 +613,20 @@ static int sx9310_write_event_config(struct iio_dev *indio_dev,
>         mutex_lock(&data->mutex);
>         if (state) {
>                 ret = sx9310_get_event_channel(data, chan->channel);
> -               if (ret < 0)
> +               if (ret)
>                         goto out_unlock;
>                 if (!(data->chan_event & ~BIT(chan->channel))) {
>                         ret = sx9310_enable_irq(data, eventirq);
> -                       if (ret < 0)
> +                       if (ret)
>                                 sx9310_put_event_channel(data, chan->channel);
>                 }
>         } else {
>                 ret = sx9310_put_event_channel(data, chan->channel);
> -               if (ret < 0)
> +               if (ret)
>                         goto out_unlock;
>                 if (!data->chan_event) {
>                         ret = sx9310_disable_irq(data, eventirq);
> -                       if (ret < 0)
> +                       if (ret)
>                                 sx9310_get_event_channel(data, chan->channel);
>                 }
>         }
> @@ -665,7 +665,7 @@ static int sx9310_set_trigger_state(struct iio_trigger *trig, bool state)
>                 ret = sx9310_enable_irq(data, SX9310_CONVDONE_IRQ);
>         else if (!data->chan_read)
>                 ret = sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
> -       if (ret < 0)
> +       if (ret)
>                 goto out;
>
>         data->trigger_enabled = state;
> @@ -694,7 +694,7 @@ static irqreturn_t sx9310_trigger_handler(int irq, void *private)
>                          indio_dev->masklength) {
>                 ret = sx9310_read_prox_data(data, &indio_dev->channels[bit],
>                                             &val);
> -               if (ret < 0)
> +               if (ret)
>                         goto out;
>
>                 data->buffer[i++] = val;
> @@ -801,13 +801,13 @@ static int sx9310_init_compensation(struct iio_dev *indio_dev)
>         unsigned int ctrl0;
>
>         ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &ctrl0);
> -       if (ret < 0)
> +       if (ret)
>                 return ret;
>
>         /* run the compensation phase on all channels */
>         ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0,
>                            ctrl0 | SX9310_REG_PROX_CTRL0_SENSOREN_MASK);
> -       if (ret < 0)
> +       if (ret)
>                 return ret;
>
>         ret = regmap_read_poll_timeout(data->regmap, SX9310_REG_STAT1, val,
> @@ -833,21 +833,21 @@ static int sx9310_init_device(struct iio_dev *indio_dev)
>         unsigned int i, val;
>
>         ret = regmap_write(data->regmap, SX9310_REG_RESET, SX9310_SOFT_RESET);
> -       if (ret < 0)
> +       if (ret)
>                 return ret;
>
>         usleep_range(1000, 2000); /* power-up time is ~1ms. */
>
>         /* Clear reset interrupt state by reading SX9310_REG_IRQ_SRC. */
>         ret = regmap_read(data->regmap, SX9310_REG_IRQ_SRC, &val);
> -       if (ret < 0)
> +       if (ret)
>                 return ret;
>
>         /* Program some sane defaults. */
>         for (i = 0; i < ARRAY_SIZE(sx9310_default_regs); i++) {
>                 initval = &sx9310_default_regs[i];
>                 ret = regmap_write(data->regmap, initval->reg, initval->def);
> -               if (ret < 0)
> +               if (ret)
>                         return ret;
>         }
>
> @@ -901,14 +901,14 @@ static int sx9310_probe(struct i2c_client *client)
>                 return PTR_ERR(data->regmap);
>
>         ret = regmap_read(data->regmap, SX9310_REG_WHOAMI, &data->whoami);
> -       if (ret < 0) {
> +       if (ret) {
>                 dev_err(&client->dev, "error in reading WHOAMI register: %d",
>                         ret);
>                 return ret;
>         }
>
>         ret = sx9310_set_indio_dev_name(&client->dev, indio_dev, data->whoami);
> -       if (ret < 0)
> +       if (ret)
>                 return ret;
>
>         ACPI_COMPANION_SET(&indio_dev->dev, ACPI_COMPANION(&client->dev));
> @@ -920,7 +920,7 @@ static int sx9310_probe(struct i2c_client *client)
>         i2c_set_clientdata(client, indio_dev);
>
>         ret = sx9310_init_device(indio_dev);
> -       if (ret < 0)
> +       if (ret)
>                 return ret;
>
>         if (client->irq) {
> @@ -929,7 +929,7 @@ static int sx9310_probe(struct i2c_client *client)
>                                                 sx9310_irq_thread_handler,
>                                                 IRQF_TRIGGER_LOW | IRQF_ONESHOT,
>                                                 "sx9310_event", indio_dev);
> -               if (ret < 0)
> +               if (ret)
>                         return ret;
>
>                 data->trig =
> @@ -951,7 +951,7 @@ static int sx9310_probe(struct i2c_client *client)
>                                               iio_pollfunc_store_time,
>                                               sx9310_trigger_handler,
>                                               &sx9310_buffer_setup_ops);
> -       if (ret < 0)
> +       if (ret)
>                 return ret;
>
>         return devm_iio_device_register(&client->dev, indio_dev);
> --
> 2.28.0.rc0.142.g3c755180ce-goog
>


-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH 10/15] iio: sx9310: Simplify error return handling

[Stephen Boyd]

Quoting Daniel Campello (2020-07-28 08:12:53)
> @@ -368,13 +368,13 @@ static int sx9310_wait_for_sample(struct sx9310_data *data)
>  static int sx9310_read_proximity(struct sx9310_data *data,
>                                  const struct iio_chan_spec *chan, int *val)
>  {
> -       int ret = 0;
> +       int ret;
>         __be16 rawval;
>  
>         mutex_lock(&data->mutex);
>  
>         ret = sx9310_get_read_channel(data, chan->channel);
> -       if (ret < 0)
> +       if (ret)
>                 goto out;
>  
>         if (data->client->irq) {
> @@ -394,11 +394,11 @@ static int sx9310_read_proximity(struct sx9310_data *data,
>  
>         mutex_lock(&data->mutex);
>  
> -       if (ret < 0)
> +       if (ret)
>                 goto out_disable_irq;

Why is this condition checked after grabbing the mutex? Shouldn't it be
checked before grabbing the mutex? Or is that supposed to be a
mutex_unlock()?

>  
>         ret = sx9310_read_prox_data(data, chan, &rawval);
> -       if (ret < 0)
> +       if (ret)
>                 goto out_disable_irq;
>  
>         *val = sign_extend32(be16_to_cpu(rawval),

Re: [PATCH 10/15] iio: sx9310: Simplify error return handling

[Daniel Campello]

On Tue, Jul 28, 2020 at 1:40 PM Stephen Boyd <swboyd@chromium.org> wrote:
>
> Quoting Daniel Campello (2020-07-28 08:12:53)
> > @@ -368,13 +368,13 @@ static int sx9310_wait_for_sample(struct sx9310_data *data)
> >  static int sx9310_read_proximity(struct sx9310_data *data,
> >                                  const struct iio_chan_spec *chan, int *val)
> >  {
> > -       int ret = 0;
> > +       int ret;
> >         __be16 rawval;
> >
> >         mutex_lock(&data->mutex);
> >
> >         ret = sx9310_get_read_channel(data, chan->channel);
> > -       if (ret < 0)
> > +       if (ret)
> >                 goto out;
> >
> >         if (data->client->irq) {
> > @@ -394,11 +394,11 @@ static int sx9310_read_proximity(struct sx9310_data *data,
> >
> >         mutex_lock(&data->mutex);
> >
> > -       if (ret < 0)
> > +       if (ret)
> >                 goto out_disable_irq;
>
> Why is this condition checked after grabbing the mutex? Shouldn't it be
> checked before grabbing the mutex? Or is that supposed to be a
> mutex_unlock()?
We acquire the lock before jumping to out_disable_irq which is before
a mutex_unlock()
>
> >
> >         ret = sx9310_read_prox_data(data, chan, &rawval);
> > -       if (ret < 0)
> > +       if (ret)
> >                 goto out_disable_irq;
> >
> >         *val = sign_extend32(be16_to_cpu(rawval),

Re: [PATCH 10/15] iio: sx9310: Simplify error return handling

[Stephen Boyd]

Quoting Daniel Campello (2020-07-28 14:23:29)
> On Tue, Jul 28, 2020 at 1:40 PM Stephen Boyd <swboyd@chromium.org> wrote:
> >
> > Quoting Daniel Campello (2020-07-28 08:12:53)
> > > @@ -368,13 +368,13 @@ static int sx9310_wait_for_sample(struct sx9310_data *data)
> > >  static int sx9310_read_proximity(struct sx9310_data *data,
> > >                                  const struct iio_chan_spec *chan, int *val)
> > >  {
> > > -       int ret = 0;
> > > +       int ret;
> > >         __be16 rawval;
> > >
> > >         mutex_lock(&data->mutex);
> > >
> > >         ret = sx9310_get_read_channel(data, chan->channel);
> > > -       if (ret < 0)
> > > +       if (ret)
> > >                 goto out;
> > >
> > >         if (data->client->irq) {
> > > @@ -394,11 +394,11 @@ static int sx9310_read_proximity(struct sx9310_data *data,
> > >
> > >         mutex_lock(&data->mutex);
> > >
> > > -       if (ret < 0)
> > > +       if (ret)
> > >                 goto out_disable_irq;
> >
> > Why is this condition checked after grabbing the mutex? Shouldn't it be
> > checked before grabbing the mutex? Or is that supposed to be a
> > mutex_unlock()?
> We acquire the lock before jumping to out_disable_irq which is before
> a mutex_unlock()

Does this function need to hold the mutex lock around get/put_read_channel?
It drops the lock while waiting and then regrabs it which seems to
imply that another reader could come in and try to get the channel again
during the wait. So put another way, it may be simpler to shorten the
lock area and then bail out of this function to a place where the lock
isn't held already on the return path.

Re: [PATCH 10/15] iio: sx9310: Simplify error return handling

[Daniel Campello]

On Tue, Jul 28, 2020 at 3:32 PM Stephen Boyd <swboyd@chromium.org> wrote:
>
> Quoting Daniel Campello (2020-07-28 14:23:29)
> > On Tue, Jul 28, 2020 at 1:40 PM Stephen Boyd <swboyd@chromium.org> wrote:
> > >
> > > Quoting Daniel Campello (2020-07-28 08:12:53)
> > > > @@ -368,13 +368,13 @@ static int sx9310_wait_for_sample(struct sx9310_data *data)
> > > >  static int sx9310_read_proximity(struct sx9310_data *data,
> > > >                                  const struct iio_chan_spec *chan, int *val)
> > > >  {
> > > > -       int ret = 0;
> > > > +       int ret;
> > > >         __be16 rawval;
> > > >
> > > >         mutex_lock(&data->mutex);
> > > >
> > > >         ret = sx9310_get_read_channel(data, chan->channel);
> > > > -       if (ret < 0)
> > > > +       if (ret)
> > > >                 goto out;
> > > >
> > > >         if (data->client->irq) {
> > > > @@ -394,11 +394,11 @@ static int sx9310_read_proximity(struct sx9310_data *data,
> > > >
> > > >         mutex_lock(&data->mutex);
> > > >
> > > > -       if (ret < 0)
> > > > +       if (ret)
> > > >                 goto out_disable_irq;
> > >
> > > Why is this condition checked after grabbing the mutex? Shouldn't it be
> > > checked before grabbing the mutex? Or is that supposed to be a
> > > mutex_unlock()?
> > We acquire the lock before jumping to out_disable_irq which is before
> > a mutex_unlock()
>
> Does this function need to hold the mutex lock around get/put_read_channel?
Yes, both get/put_read_channel and get/put_event_channel use
sx9310_update_chan_en which is updating data->chan_{read,event}
bitmaps.
> It drops the lock while waiting and then regrabs it which seems to
> imply that another reader could come in and try to get the channel again
> during the wait. So put another way, it may be simpler to shorten the
> lock area and then bail out of this function to a place where the lock
> isn't held already on the return path.

[PATCH 11/15] iio: sx9310: Use variable to hold &client->dev

[Daniel Campello]

Improves readability by storing &client->dev in a local variable.

Signed-off-by: Daniel Campello <campello@chromium.org>
---

 drivers/iio/proximity/sx9310.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 051c6515e62c18..ba383710ef0dcf 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -884,11 +884,12 @@ static int sx9310_set_indio_dev_name(struct device *dev,
 static int sx9310_probe(struct i2c_client *client)
 {
 	int ret;
+	struct device *dev = &client->dev;
 	struct iio_dev *indio_dev;
 	struct sx9310_data *data;
 
-	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
-	if (indio_dev == NULL)
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
 		return -ENOMEM;
 
 	data = iio_priv(indio_dev);
@@ -902,17 +903,16 @@ static int sx9310_probe(struct i2c_client *client)
 
 	ret = regmap_read(data->regmap, SX9310_REG_WHOAMI, &data->whoami);
 	if (ret) {
-		dev_err(&client->dev, "error in reading WHOAMI register: %d",
-			ret);
+		dev_err(dev, "error in reading WHOAMI register: %d", ret);
 		return ret;
 	}
 
-	ret = sx9310_set_indio_dev_name(&client->dev, indio_dev, data->whoami);
+	ret = sx9310_set_indio_dev_name(dev, indio_dev, data->whoami);
 	if (ret)
 		return ret;
 
-	ACPI_COMPANION_SET(&indio_dev->dev, ACPI_COMPANION(&client->dev));
-	indio_dev->dev.parent = &client->dev;
+	ACPI_COMPANION_SET(&indio_dev->dev, ACPI_COMPANION(dev));
+	indio_dev->dev.parent = dev;
 	indio_dev->channels = sx9310_channels;
 	indio_dev->num_channels = ARRAY_SIZE(sx9310_channels);
 	indio_dev->info = &sx9310_info;
@@ -924,7 +924,7 @@ static int sx9310_probe(struct i2c_client *client)
 		return ret;
 
 	if (client->irq) {
-		ret = devm_request_threaded_irq(&client->dev, client->irq,
+		ret = devm_request_threaded_irq(dev, client->irq,
 						sx9310_irq_handler,
 						sx9310_irq_thread_handler,
 						IRQF_TRIGGER_LOW | IRQF_ONESHOT,
@@ -932,29 +932,29 @@ static int sx9310_probe(struct i2c_client *client)
 		if (ret)
 			return ret;
 
-		data->trig =
-			devm_iio_trigger_alloc(&client->dev, "%s-dev%d",
-					       indio_dev->name, indio_dev->id);
+		data->trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
+						    indio_dev->name,
+						    indio_dev->id);
 		if (!data->trig)
 			return -ENOMEM;
 
-		data->trig->dev.parent = &client->dev;
+		data->trig->dev.parent = dev;
 		data->trig->ops = &sx9310_trigger_ops;
 		iio_trigger_set_drvdata(data->trig, indio_dev);
 
-		ret = devm_iio_trigger_register(&client->dev, data->trig);
+		ret = devm_iio_trigger_register(dev, data->trig);
 		if (ret)
 			return ret;
 	}
 
-	ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev,
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
 					      iio_pollfunc_store_time,
 					      sx9310_trigger_handler,
 					      &sx9310_buffer_setup_ops);
 	if (ret)
 		return ret;
 
-	return devm_iio_device_register(&client->dev, indio_dev);
+	return devm_iio_device_register(dev, indio_dev);
 }
 
 static int __maybe_unused sx9310_suspend(struct device *dev)
-- 
2.28.0.rc0.142.g3c755180ce-goog

Re: [PATCH 11/15] iio: sx9310: Use variable to hold &client->dev

[Andy Shevchenko]

On Tue, Jul 28, 2020 at 6:14 PM Daniel Campello <campello@chromium.org> wrote:
>
> Improves readability by storing &client->dev in a local variable.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Signed-off-by: Daniel Campello <campello@chromium.org>
> ---
>
>  drivers/iio/proximity/sx9310.c | 30 +++++++++++++++---------------
>  1 file changed, 15 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
> index 051c6515e62c18..ba383710ef0dcf 100644
> --- a/drivers/iio/proximity/sx9310.c
> +++ b/drivers/iio/proximity/sx9310.c
> @@ -884,11 +884,12 @@ static int sx9310_set_indio_dev_name(struct device *dev,
>  static int sx9310_probe(struct i2c_client *client)
>  {
>         int ret;
> +       struct device *dev = &client->dev;
>         struct iio_dev *indio_dev;
>         struct sx9310_data *data;
>
> -       indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> -       if (indio_dev == NULL)
> +       indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
> +       if (!indio_dev)
>                 return -ENOMEM;
>
>         data = iio_priv(indio_dev);
> @@ -902,17 +903,16 @@ static int sx9310_probe(struct i2c_client *client)
>
>         ret = regmap_read(data->regmap, SX9310_REG_WHOAMI, &data->whoami);
>         if (ret) {
> -               dev_err(&client->dev, "error in reading WHOAMI register: %d",
> -                       ret);
> +               dev_err(dev, "error in reading WHOAMI register: %d", ret);
>                 return ret;
>         }
>
> -       ret = sx9310_set_indio_dev_name(&client->dev, indio_dev, data->whoami);
> +       ret = sx9310_set_indio_dev_name(dev, indio_dev, data->whoami);
>         if (ret)
>                 return ret;
>
> -       ACPI_COMPANION_SET(&indio_dev->dev, ACPI_COMPANION(&client->dev));
> -       indio_dev->dev.parent = &client->dev;
> +       ACPI_COMPANION_SET(&indio_dev->dev, ACPI_COMPANION(dev));
> +       indio_dev->dev.parent = dev;
>         indio_dev->channels = sx9310_channels;
>         indio_dev->num_channels = ARRAY_SIZE(sx9310_channels);
>         indio_dev->info = &sx9310_info;
> @@ -924,7 +924,7 @@ static int sx9310_probe(struct i2c_client *client)
>                 return ret;
>
>         if (client->irq) {
> -               ret = devm_request_threaded_irq(&client->dev, client->irq,
> +               ret = devm_request_threaded_irq(dev, client->irq,
>                                                 sx9310_irq_handler,
>                                                 sx9310_irq_thread_handler,
>                                                 IRQF_TRIGGER_LOW | IRQF_ONESHOT,
> @@ -932,29 +932,29 @@ static int sx9310_probe(struct i2c_client *client)
>                 if (ret)
>                         return ret;
>
> -               data->trig =
> -                       devm_iio_trigger_alloc(&client->dev, "%s-dev%d",
> -                                              indio_dev->name, indio_dev->id);
> +               data->trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
> +                                                   indio_dev->name,
> +                                                   indio_dev->id);
>                 if (!data->trig)
>                         return -ENOMEM;
>
> -               data->trig->dev.parent = &client->dev;
> +               data->trig->dev.parent = dev;
>                 data->trig->ops = &sx9310_trigger_ops;
>                 iio_trigger_set_drvdata(data->trig, indio_dev);
>
> -               ret = devm_iio_trigger_register(&client->dev, data->trig);
> +               ret = devm_iio_trigger_register(dev, data->trig);
>                 if (ret)
>                         return ret;
>         }
>
> -       ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev,
> +       ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
>                                               iio_pollfunc_store_time,
>                                               sx9310_trigger_handler,
>                                               &sx9310_buffer_setup_ops);
>         if (ret)
>                 return ret;
>
> -       return devm_iio_device_register(&client->dev, indio_dev);
> +       return devm_iio_device_register(dev, indio_dev);
>  }
>
>  static int __maybe_unused sx9310_suspend(struct device *dev)
> --
> 2.28.0.rc0.142.g3c755180ce-goog
>


-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH 11/15] iio: sx9310: Use variable to hold &client->dev

[Stephen Boyd]

Quoting Daniel Campello (2020-07-28 08:12:54)
> Improves readability by storing &client->dev in a local variable.
> 
> Signed-off-by: Daniel Campello <campello@chromium.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

[PATCH 12/15] iio: sx9310: Miscellaneous format fixes

[Daniel Campello]

Miscellaneous format fixes throughout the whole file.

Signed-off-by: Daniel Campello <campello@chromium.org>
---

 drivers/iio/proximity/sx9310.c | 28 ++++++++++------------------
 1 file changed, 10 insertions(+), 18 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index ba383710ef0dcf..3f981d28ee4056 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -90,28 +90,21 @@
 #define   SX9310_REG_SAR_CTRL2_SAROFFSET_DEFAULT	0x3c
 
 #define SX9310_REG_SENSOR_SEL				0x30
-
 #define SX9310_REG_USE_MSB				0x31
 #define SX9310_REG_USE_LSB				0x32
-
 #define SX9310_REG_AVG_MSB				0x33
 #define SX9310_REG_AVG_LSB				0x34
-
 #define SX9310_REG_DIFF_MSB				0x35
 #define SX9310_REG_DIFF_LSB				0x36
-
 #define SX9310_REG_OFFSET_MSB				0x37
 #define SX9310_REG_OFFSET_LSB				0x38
-
 #define SX9310_REG_SAR_MSB				0x39
 #define SX9310_REG_SAR_LSB				0x3a
-
 #define SX9310_REG_I2C_ADDR				0x40
 #define SX9310_REG_PAUSE				0x41
 #define SX9310_REG_WHOAMI				0x42
 #define   SX9310_WHOAMI_VALUE				0x01
 #define   SX9311_WHOAMI_VALUE				0x02
-
 #define SX9310_REG_RESET				0x7f
 #define   SX9310_SOFT_RESET				0xde
 
@@ -402,7 +395,7 @@ static int sx9310_read_proximity(struct sx9310_data *data,
 		goto out_disable_irq;
 
 	*val = sign_extend32(be16_to_cpu(rawval),
-			     (chan->address == SX9310_REG_DIFF_MSB ? 11 : 15));
+			     chan->address == SX9310_REG_DIFF_MSB ? 11 : 15);
 
 	if (data->client->irq) {
 		ret = sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
@@ -432,8 +425,9 @@ static int sx9310_read_proximity(struct sx9310_data *data,
 static int sx9310_read_samp_freq(struct sx9310_data *data, int *val, int *val2)
 {
 	unsigned int regval;
-	int ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &regval);
+	int ret;
 
+	ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &regval);
 	if (ret)
 		return ret;
 
@@ -518,10 +512,9 @@ static irqreturn_t sx9310_irq_handler(int irq, void *private)
 		iio_trigger_poll(data->trig);
 
 	/*
-	 * Even if no event is enabled, we need to wake the thread to
-	 * clear the interrupt state by reading SX9310_REG_IRQ_SRC.  It
-	 * is not possible to do that here because regmap_read takes a
-	 * mutex.
+	 * Even if no event is enabled, we need to wake the thread to clear the
+	 * interrupt state by reading SX9310_REG_IRQ_SRC.
+	 * It is not possible to do that here because regmap_read takes a mutex.
 	 */
 	return IRQ_WAKE_THREAD;
 }
@@ -638,7 +631,7 @@ static int sx9310_write_event_config(struct iio_dev *indio_dev,
 
 static struct attribute *sx9310_attributes[] = {
 	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
-	NULL,
+	NULL
 };
 
 static const struct attribute_group sx9310_attribute_group = {
@@ -969,7 +962,6 @@ static int __maybe_unused sx9310_suspend(struct device *dev)
 	mutex_lock(&data->mutex);
 	ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0,
 			  &data->suspend_ctrl0);
-
 	if (ret)
 		goto out;
 
@@ -1015,21 +1007,21 @@ static const struct dev_pm_ops sx9310_pm_ops = {
 static const struct acpi_device_id sx9310_acpi_match[] = {
 	{ "STH9310", SX9310_WHOAMI_VALUE },
 	{ "STH9311", SX9311_WHOAMI_VALUE },
-	{},
+	{}
 };
 MODULE_DEVICE_TABLE(acpi, sx9310_acpi_match);
 
 static const struct of_device_id sx9310_of_match[] = {
 	{ .compatible = "semtech,sx9310", (void *)SX9310_WHOAMI_VALUE },
 	{ .compatible = "semtech,sx9311", (void *)SX9311_WHOAMI_VALUE },
-	{},
+	{}
 };
 MODULE_DEVICE_TABLE(of, sx9310_of_match);
 
 static const struct i2c_device_id sx9310_id[] = {
 	{ "sx9310", SX9310_WHOAMI_VALUE },
 	{ "sx9311", SX9311_WHOAMI_VALUE },
-	{},
+	{}
 };
 MODULE_DEVICE_TABLE(i2c, sx9310_id);
 
-- 
2.28.0.rc0.142.g3c755180ce-goog

Re: [PATCH 12/15] iio: sx9310: Miscellaneous format fixes

[Andy Shevchenko]

On Tue, Jul 28, 2020 at 6:14 PM Daniel Campello <campello@chromium.org> wrote:
>
> Miscellaneous format fixes throughout the whole file.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Signed-off-by: Daniel Campello <campello@chromium.org>
> ---
>
>  drivers/iio/proximity/sx9310.c | 28 ++++++++++------------------
>  1 file changed, 10 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
> index ba383710ef0dcf..3f981d28ee4056 100644
> --- a/drivers/iio/proximity/sx9310.c
> +++ b/drivers/iio/proximity/sx9310.c
> @@ -90,28 +90,21 @@
>  #define   SX9310_REG_SAR_CTRL2_SAROFFSET_DEFAULT       0x3c
>
>  #define SX9310_REG_SENSOR_SEL                          0x30
> -
>  #define SX9310_REG_USE_MSB                             0x31
>  #define SX9310_REG_USE_LSB                             0x32
> -
>  #define SX9310_REG_AVG_MSB                             0x33
>  #define SX9310_REG_AVG_LSB                             0x34
> -
>  #define SX9310_REG_DIFF_MSB                            0x35
>  #define SX9310_REG_DIFF_LSB                            0x36
> -
>  #define SX9310_REG_OFFSET_MSB                          0x37
>  #define SX9310_REG_OFFSET_LSB                          0x38
> -
>  #define SX9310_REG_SAR_MSB                             0x39
>  #define SX9310_REG_SAR_LSB                             0x3a
> -
>  #define SX9310_REG_I2C_ADDR                            0x40
>  #define SX9310_REG_PAUSE                               0x41
>  #define SX9310_REG_WHOAMI                              0x42
>  #define   SX9310_WHOAMI_VALUE                          0x01
>  #define   SX9311_WHOAMI_VALUE                          0x02
> -
>  #define SX9310_REG_RESET                               0x7f
>  #define   SX9310_SOFT_RESET                            0xde
>
> @@ -402,7 +395,7 @@ static int sx9310_read_proximity(struct sx9310_data *data,
>                 goto out_disable_irq;
>
>         *val = sign_extend32(be16_to_cpu(rawval),
> -                            (chan->address == SX9310_REG_DIFF_MSB ? 11 : 15));
> +                            chan->address == SX9310_REG_DIFF_MSB ? 11 : 15);
>
>         if (data->client->irq) {
>                 ret = sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
> @@ -432,8 +425,9 @@ static int sx9310_read_proximity(struct sx9310_data *data,
>  static int sx9310_read_samp_freq(struct sx9310_data *data, int *val, int *val2)
>  {
>         unsigned int regval;
> -       int ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &regval);
> +       int ret;
>
> +       ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &regval);
>         if (ret)
>                 return ret;
>
> @@ -518,10 +512,9 @@ static irqreturn_t sx9310_irq_handler(int irq, void *private)
>                 iio_trigger_poll(data->trig);
>
>         /*
> -        * Even if no event is enabled, we need to wake the thread to
> -        * clear the interrupt state by reading SX9310_REG_IRQ_SRC.  It
> -        * is not possible to do that here because regmap_read takes a
> -        * mutex.
> +        * Even if no event is enabled, we need to wake the thread to clear the
> +        * interrupt state by reading SX9310_REG_IRQ_SRC.
> +        * It is not possible to do that here because regmap_read takes a mutex.
>          */
>         return IRQ_WAKE_THREAD;
>  }
> @@ -638,7 +631,7 @@ static int sx9310_write_event_config(struct iio_dev *indio_dev,
>
>  static struct attribute *sx9310_attributes[] = {
>         &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
> -       NULL,
> +       NULL
>  };
>
>  static const struct attribute_group sx9310_attribute_group = {
> @@ -969,7 +962,6 @@ static int __maybe_unused sx9310_suspend(struct device *dev)
>         mutex_lock(&data->mutex);
>         ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0,
>                           &data->suspend_ctrl0);
> -
>         if (ret)
>                 goto out;
>
> @@ -1015,21 +1007,21 @@ static const struct dev_pm_ops sx9310_pm_ops = {
>  static const struct acpi_device_id sx9310_acpi_match[] = {
>         { "STH9310", SX9310_WHOAMI_VALUE },
>         { "STH9311", SX9311_WHOAMI_VALUE },
> -       {},
> +       {}
>  };
>  MODULE_DEVICE_TABLE(acpi, sx9310_acpi_match);
>
>  static const struct of_device_id sx9310_of_match[] = {
>         { .compatible = "semtech,sx9310", (void *)SX9310_WHOAMI_VALUE },
>         { .compatible = "semtech,sx9311", (void *)SX9311_WHOAMI_VALUE },
> -       {},
> +       {}
>  };
>  MODULE_DEVICE_TABLE(of, sx9310_of_match);
>
>  static const struct i2c_device_id sx9310_id[] = {
>         { "sx9310", SX9310_WHOAMI_VALUE },
>         { "sx9311", SX9311_WHOAMI_VALUE },
> -       {},
> +       {}
>  };
>  MODULE_DEVICE_TABLE(i2c, sx9310_id);
>
> --
> 2.28.0.rc0.142.g3c755180ce-goog
>


-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH 12/15] iio: sx9310: Miscellaneous format fixes

[Stephen Boyd]

Quoting Daniel Campello (2020-07-28 08:12:55)
> Miscellaneous format fixes throughout the whole file.
> 
> Signed-off-by: Daniel Campello <campello@chromium.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

[PATCH 13/15] iio: sx9310: Add newlines to printks

[Daniel Campello]

From: Stephen Boyd <swboyd@chromium.org>

Printks in the kernel have newlines at the end. Add them to the few
printks in this driver.

Reviewed-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Fixes: 72ad02b15d63 ("iio: Add SEMTECH SX9310/9311 sensor driver")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Daniel Campello <campello@chromium.org>
---

 drivers/iio/proximity/sx9310.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 3f981d28ee4056..4553ee83a016a3 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -809,7 +809,7 @@ static int sx9310_init_compensation(struct iio_dev *indio_dev)
 	if (ret) {
 		if (ret == -ETIMEDOUT)
 			dev_err(&data->client->dev,
-				"0x02 << 3l compensation timed out: 0x%02x",
+				"0x02 << 3l compensation timed out: 0x%02x\n",
 				val);
 		return ret;
 	}
@@ -855,7 +855,7 @@ static int sx9310_set_indio_dev_name(struct device *dev,
 
 	ddata = (uintptr_t)device_get_match_data(dev);
 	if (ddata != whoami) {
-		dev_err(dev, "WHOAMI does not match device data: %u", whoami);
+		dev_err(dev, "WHOAMI does not match device data: %u\n", whoami);
 		return -ENODEV;
 	}
 
@@ -867,7 +867,7 @@ static int sx9310_set_indio_dev_name(struct device *dev,
 		indio_dev->name = "sx9311";
 		break;
 	default:
-		dev_err(dev, "unexpected WHOAMI response: %u", whoami);
+		dev_err(dev, "unexpected WHOAMI response: %u\n", whoami);
 		return -ENODEV;
 	}
 
@@ -896,7 +896,7 @@ static int sx9310_probe(struct i2c_client *client)
 
 	ret = regmap_read(data->regmap, SX9310_REG_WHOAMI, &data->whoami);
 	if (ret) {
-		dev_err(dev, "error in reading WHOAMI register: %d", ret);
+		dev_err(dev, "error in reading WHOAMI register: %d\n", ret);
 		return ret;
 	}
 
-- 
2.28.0.rc0.142.g3c755180ce-goog

Re: [PATCH 13/15] iio: sx9310: Add newlines to printks

[Andy Shevchenko]

On Tue, Jul 28, 2020 at 6:14 PM Daniel Campello <campello@chromium.org> wrote:
>
> From: Stephen Boyd <swboyd@chromium.org>
>
> Printks in the kernel have newlines at the end. Add them to the few

Printk()s

> printks in this driver.

printk()s

> Reviewed-by: Daniel Campello <campello@chromium.org>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> Fixes: 72ad02b15d63 ("iio: Add SEMTECH SX9310/9311 sensor driver")
> Signed-off-by: Stephen Boyd <swboyd@chromium.org>
> Signed-off-by: Daniel Campello <campello@chromium.org>

It has ordering issues
Should be

Fixes:
SoB: Stephen
Rb: Douglas
Rb: Daniel
SoB: Daniel


> ---
>
>  drivers/iio/proximity/sx9310.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
> index 3f981d28ee4056..4553ee83a016a3 100644
> --- a/drivers/iio/proximity/sx9310.c
> +++ b/drivers/iio/proximity/sx9310.c
> @@ -809,7 +809,7 @@ static int sx9310_init_compensation(struct iio_dev *indio_dev)
>         if (ret) {
>                 if (ret == -ETIMEDOUT)
>                         dev_err(&data->client->dev,
> -                               "0x02 << 3l compensation timed out: 0x%02x",
> +                               "0x02 << 3l compensation timed out: 0x%02x\n",

Looks like ping-pong style in the series, i.e. you may fix this when
you introduced this line.

Check the rest (and not only printk()s) for the similar style and
avoid the latter.

>                                 val);
>                 return ret;
>         }
> @@ -855,7 +855,7 @@ static int sx9310_set_indio_dev_name(struct device *dev,
>
>         ddata = (uintptr_t)device_get_match_data(dev);
>         if (ddata != whoami) {
> -               dev_err(dev, "WHOAMI does not match device data: %u", whoami);
> +               dev_err(dev, "WHOAMI does not match device data: %u\n", whoami);
>                 return -ENODEV;
>         }
>
> @@ -867,7 +867,7 @@ static int sx9310_set_indio_dev_name(struct device *dev,
>                 indio_dev->name = "sx9311";
>                 break;
>         default:
> -               dev_err(dev, "unexpected WHOAMI response: %u", whoami);
> +               dev_err(dev, "unexpected WHOAMI response: %u\n", whoami);
>                 return -ENODEV;
>         }
>
> @@ -896,7 +896,7 @@ static int sx9310_probe(struct i2c_client *client)
>
>         ret = regmap_read(data->regmap, SX9310_REG_WHOAMI, &data->whoami);
>         if (ret) {
> -               dev_err(dev, "error in reading WHOAMI register: %d", ret);
> +               dev_err(dev, "error in reading WHOAMI register: %d\n", ret);
>                 return ret;
>         }
>
> --
> 2.28.0.rc0.142.g3c755180ce-goog
>


-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH 13/15] iio: sx9310: Add newlines to printks

[Joe Perches]

On Tue, 2020-07-28 at 21:19 +0300, Andy Shevchenko wrote:
> On Tue, Jul 28, 2020 at 6:14 PM Daniel Campello <campello@chromium.org> wrote:
> > From: Stephen Boyd <swboyd@chromium.org>
> > 
> > Printks in the kernel have newlines at the end. Add them to the few
> 
> Printk()s
> 
> > printks in this driver.
> 
> printk()s

Random kernel pedantry.
This patch should not need to be respun for any of these.

> > Reviewed-by: Daniel Campello <campello@chromium.org>
> > Reviewed-by: Douglas Anderson <dianders@chromium.org>
> > Fixes: 72ad02b15d63 ("iio: Add SEMTECH SX9310/9311 sensor driver")
> > Signed-off-by: Stephen Boyd <swboyd@chromium.org>
> > Signed-off-by: Daniel Campello <campello@chromium.org>
> 
> It has ordering issues
> Should be
> 
> Fixes:
> SoB: Stephen
> Rb: Douglas
> Rb: Daniel
> SoB: Daniel
> 
> 
> > ---
> > 
> >  drivers/iio/proximity/sx9310.c | 8 ++++----
> >  1 file changed, 4 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
> > index 3f981d28ee4056..4553ee83a016a3 100644
> > --- a/drivers/iio/proximity/sx9310.c
> > +++ b/drivers/iio/proximity/sx9310.c
> > @@ -809,7 +809,7 @@ static int sx9310_init_compensation(struct iio_dev *indio_dev)
> >         if (ret) {
> >                 if (ret == -ETIMEDOUT)
> >                         dev_err(&data->client->dev,
> > -                               "0x02 << 3l compensation timed out: 0x%02x",
> > +                               "0x02 << 3l compensation timed out: 0x%02x\n",
> 
> Looks like ping-pong style in the series, i.e. you may fix this when
> you introduced this line.
> 
> Check the rest (and not only printk()s) for the similar style and
> avoid the latter.
> 
> >                                 val);
> >                 return ret;
> >         }
> > @@ -855,7 +855,7 @@ static int sx9310_set_indio_dev_name(struct device *dev,
> > 
> >         ddata = (uintptr_t)device_get_match_data(dev);
> >         if (ddata != whoami) {
> > -               dev_err(dev, "WHOAMI does not match device data: %u", whoami);
> > +               dev_err(dev, "WHOAMI does not match device data: %u\n", whoami);
> >                 return -ENODEV;
> >         }
> > 
> > @@ -867,7 +867,7 @@ static int sx9310_set_indio_dev_name(struct device *dev,
> >                 indio_dev->name = "sx9311";
> >                 break;
> >         default:
> > -               dev_err(dev, "unexpected WHOAMI response: %u", whoami);
> > +               dev_err(dev, "unexpected WHOAMI response: %u\n", whoami);
> >                 return -ENODEV;
> >         }
> > 
> > @@ -896,7 +896,7 @@ static int sx9310_probe(struct i2c_client *client)
> > 
> >         ret = regmap_read(data->regmap, SX9310_REG_WHOAMI, &data->whoami);
> >         if (ret) {
> > -               dev_err(dev, "error in reading WHOAMI register: %d", ret);
> > +               dev_err(dev, "error in reading WHOAMI register: %d\n", ret);
> >                 return ret;
> >         }
> > 
> > --
> > 2.28.0.rc0.142.g3c755180ce-goog
> > 
> 
> 

Re: [PATCH 13/15] iio: sx9310: Add newlines to printks

[Andy Shevchenko]

On Tue, Jul 28, 2020 at 9:24 PM Joe Perches <joe@perches.com> wrote:
> On Tue, 2020-07-28 at 21:19 +0300, Andy Shevchenko wrote:
> > On Tue, Jul 28, 2020 at 6:14 PM Daniel Campello <campello@chromium.org> wrote:
> > > From: Stephen Boyd <swboyd@chromium.org>
> > >
> > > Printks in the kernel have newlines at the end. Add them to the few
> >
> > Printk()s
> >
> > > printks in this driver.
> >
> > printk()s
>
> Random kernel pedantry.
> This patch should not need to be respun for any of these.

If for above I can agree with you, below is definitely subject to improvement.

>
> > > Reviewed-by: Daniel Campello <campello@chromium.org>
> > > Reviewed-by: Douglas Anderson <dianders@chromium.org>
> > > Fixes: 72ad02b15d63 ("iio: Add SEMTECH SX9310/9311 sensor driver")
> > > Signed-off-by: Stephen Boyd <swboyd@chromium.org>
> > > Signed-off-by: Daniel Campello <campello@chromium.org>
> >
> > It has ordering issues
> > Should be
> >
> > Fixes:
> > SoB: Stephen
> > Rb: Douglas
> > Rb: Daniel
> > SoB: Daniel
> >
> >
> > > ---
> > >
> > >  drivers/iio/proximity/sx9310.c | 8 ++++----
> > >  1 file changed, 4 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
> > > index 3f981d28ee4056..4553ee83a016a3 100644
> > > --- a/drivers/iio/proximity/sx9310.c
> > > +++ b/drivers/iio/proximity/sx9310.c
> > > @@ -809,7 +809,7 @@ static int sx9310_init_compensation(struct iio_dev *indio_dev)
> > >         if (ret) {
> > >                 if (ret == -ETIMEDOUT)
> > >                         dev_err(&data->client->dev,
> > > -                               "0x02 << 3l compensation timed out: 0x%02x",
> > > +                               "0x02 << 3l compensation timed out: 0x%02x\n",
> >
> > Looks like ping-pong style in the series, i.e. you may fix this when
> > you introduced this line.
> >
> > Check the rest (and not only printk()s) for the similar style and
> > avoid the latter.
> >
> > >                                 val);
> > >                 return ret;
> > >         }
> > > @@ -855,7 +855,7 @@ static int sx9310_set_indio_dev_name(struct device *dev,
> > >
> > >         ddata = (uintptr_t)device_get_match_data(dev);
> > >         if (ddata != whoami) {
> > > -               dev_err(dev, "WHOAMI does not match device data: %u", whoami);
> > > +               dev_err(dev, "WHOAMI does not match device data: %u\n", whoami);
> > >                 return -ENODEV;
> > >         }
> > >
> > > @@ -867,7 +867,7 @@ static int sx9310_set_indio_dev_name(struct device *dev,
> > >                 indio_dev->name = "sx9311";
> > >                 break;
> > >         default:
> > > -               dev_err(dev, "unexpected WHOAMI response: %u", whoami);
> > > +               dev_err(dev, "unexpected WHOAMI response: %u\n", whoami);
> > >                 return -ENODEV;
> > >         }
> > >
> > > @@ -896,7 +896,7 @@ static int sx9310_probe(struct i2c_client *client)
> > >
> > >         ret = regmap_read(data->regmap, SX9310_REG_WHOAMI, &data->whoami);
> > >         if (ret) {
> > > -               dev_err(dev, "error in reading WHOAMI register: %d", ret);
> > > +               dev_err(dev, "error in reading WHOAMI register: %d\n", ret);
> > >                 return ret;
> > >         }
> > >
> > > --
> > > 2.28.0.rc0.142.g3c755180ce-goog
> > >
> >
> >
>


-- 
With Best Regards,
Andy Shevchenko

[PATCH 14/15] iio: sx9310: Drop channel_users[]

[Daniel Campello]

From: Stephen Boyd <swboyd@chromium.org>

This struct member isn't used. Drop it.

Fixes: 72ad02b15d63 ("iio: Add SEMTECH SX9310/9311 sensor driver")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Daniel Campello <campello@chromium.org>
Signed-off-by: Daniel Campello <campello@chromium.org>
---

 drivers/iio/proximity/sx9310.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 4553ee83a016a3..202018b726e32f 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -131,7 +131,6 @@ struct sx9310_data {
 	struct completion completion;
 	unsigned long chan_read;
 	unsigned long chan_event;
-	int channel_users[SX9310_NUM_CHANNELS];
 	unsigned int whoami;
 };
 
-- 
2.28.0.rc0.142.g3c755180ce-goog

Re: [PATCH 14/15] iio: sx9310: Drop channel_users[]

[Andy Shevchenko]

On Tue, Jul 28, 2020 at 6:14 PM Daniel Campello <campello@chromium.org> wrote:
>
> From: Stephen Boyd <swboyd@chromium.org>
>
> This struct member isn't used. Drop it.
>
> Fixes: 72ad02b15d63 ("iio: Add SEMTECH SX9310/9311 sensor driver")
> Signed-off-by: Stephen Boyd <swboyd@chromium.org>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> Reviewed-by: Daniel Campello <campello@chromium.org>
> Signed-off-by: Daniel Campello <campello@chromium.org>

Here is everything correct!

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> ---
>
>  drivers/iio/proximity/sx9310.c | 1 -
>  1 file changed, 1 deletion(-)
>
> diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
> index 4553ee83a016a3..202018b726e32f 100644
> --- a/drivers/iio/proximity/sx9310.c
> +++ b/drivers/iio/proximity/sx9310.c
> @@ -131,7 +131,6 @@ struct sx9310_data {
>         struct completion completion;
>         unsigned long chan_read;
>         unsigned long chan_event;
> -       int channel_users[SX9310_NUM_CHANNELS];
>         unsigned int whoami;
>  };
>
> --
> 2.28.0.rc0.142.g3c755180ce-goog
>


-- 
With Best Regards,
Andy Shevchenko

[PATCH 15/15] iio: sx9310: Enable vdd and svdd regulators at probe

[Daniel Campello]

From: Stephen Boyd <swboyd@chromium.org>

Enable the main power supply (vdd) and digital IO power supply (svdd)
during probe so that the i2c communication and device works properly on
boards that aggressively power gate these supplies.

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Daniel Campello <campello@chromium.org>
---

 drivers/iio/proximity/sx9310.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 202018b726e32f..24a2360b6314ef 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -18,6 +18,7 @@
 #include <linux/module.h>
 #include <linux/pm.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 
 #include <linux/iio/buffer.h>
@@ -118,6 +119,7 @@ struct sx9310_data {
 	struct i2c_client *client;
 	struct iio_trigger *trig;
 	struct regmap *regmap;
+	struct regulator_bulk_data supplies[2];
 	/*
 	 * Last reading of the proximity status for each channel.
 	 * We only send an event to user space when this changes.
@@ -873,6 +875,13 @@ static int sx9310_set_indio_dev_name(struct device *dev,
 	return 0;
 }
 
+static void sx9310_regulator_disable(void *_data)
+{
+	struct sx9310_data *data = _data;
+
+	regulator_bulk_disable(ARRAY_SIZE(data->supplies), data->supplies);
+}
+
 static int sx9310_probe(struct i2c_client *client)
 {
 	int ret;
@@ -886,6 +895,8 @@ static int sx9310_probe(struct i2c_client *client)
 
 	data = iio_priv(indio_dev);
 	data->client = client;
+	data->supplies[0].supply = "vdd";
+	data->supplies[1].supply = "svdd";
 	mutex_init(&data->mutex);
 	init_completion(&data->completion);
 
@@ -893,6 +904,21 @@ static int sx9310_probe(struct i2c_client *client)
 	if (IS_ERR(data->regmap))
 		return PTR_ERR(data->regmap);
 
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->supplies),
+				      data->supplies);
+	if (ret)
+		return ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(data->supplies), data->supplies);
+	if (ret)
+		return ret;
+	/* Must wait for Tpor time after initial power up */
+	usleep_range(1000, 1100);
+
+	ret = devm_add_action_or_reset(dev, sx9310_regulator_disable, data);
+	if (ret)
+		return ret;
+
 	ret = regmap_read(data->regmap, SX9310_REG_WHOAMI, &data->whoami);
 	if (ret) {
 		dev_err(dev, "error in reading WHOAMI register: %d\n", ret);
-- 
2.28.0.rc0.142.g3c755180ce-goog

Re: [PATCH 15/15] iio: sx9310: Enable vdd and svdd regulators at probe

[Andy Shevchenko]

On Tue, Jul 28, 2020 at 6:14 PM Daniel Campello <campello@chromium.org> wrote:
>
> From: Stephen Boyd <swboyd@chromium.org>
>
> Enable the main power supply (vdd) and digital IO power supply (svdd)
> during probe so that the i2c communication and device works properly on
> boards that aggressively power gate these supplies.
>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> Signed-off-by: Stephen Boyd <swboyd@chromium.org>
> Signed-off-by: Daniel Campello <campello@chromium.org>

Again wrong order.
After fixing,
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> ---
>
>  drivers/iio/proximity/sx9310.c | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>
> diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
> index 202018b726e32f..24a2360b6314ef 100644
> --- a/drivers/iio/proximity/sx9310.c
> +++ b/drivers/iio/proximity/sx9310.c
> @@ -18,6 +18,7 @@
>  #include <linux/module.h>
>  #include <linux/pm.h>
>  #include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
>  #include <linux/slab.h>
>
>  #include <linux/iio/buffer.h>
> @@ -118,6 +119,7 @@ struct sx9310_data {
>         struct i2c_client *client;
>         struct iio_trigger *trig;
>         struct regmap *regmap;
> +       struct regulator_bulk_data supplies[2];
>         /*
>          * Last reading of the proximity status for each channel.
>          * We only send an event to user space when this changes.
> @@ -873,6 +875,13 @@ static int sx9310_set_indio_dev_name(struct device *dev,
>         return 0;
>  }
>
> +static void sx9310_regulator_disable(void *_data)
> +{
> +       struct sx9310_data *data = _data;
> +
> +       regulator_bulk_disable(ARRAY_SIZE(data->supplies), data->supplies);
> +}
> +
>  static int sx9310_probe(struct i2c_client *client)
>  {
>         int ret;
> @@ -886,6 +895,8 @@ static int sx9310_probe(struct i2c_client *client)
>
>         data = iio_priv(indio_dev);
>         data->client = client;
> +       data->supplies[0].supply = "vdd";
> +       data->supplies[1].supply = "svdd";
>         mutex_init(&data->mutex);
>         init_completion(&data->completion);
>
> @@ -893,6 +904,21 @@ static int sx9310_probe(struct i2c_client *client)
>         if (IS_ERR(data->regmap))
>                 return PTR_ERR(data->regmap);
>
> +       ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->supplies),
> +                                     data->supplies);
> +       if (ret)
> +               return ret;
> +
> +       ret = regulator_bulk_enable(ARRAY_SIZE(data->supplies), data->supplies);
> +       if (ret)
> +               return ret;
> +       /* Must wait for Tpor time after initial power up */
> +       usleep_range(1000, 1100);
> +
> +       ret = devm_add_action_or_reset(dev, sx9310_regulator_disable, data);
> +       if (ret)
> +               return ret;
> +
>         ret = regmap_read(data->regmap, SX9310_REG_WHOAMI, &data->whoami);
>         if (ret) {
>                 dev_err(dev, "error in reading WHOAMI register: %d\n", ret);
> --
> 2.28.0.rc0.142.g3c755180ce-goog
>


-- 
With Best Regards,
Andy Shevchenko

[PATCH v2 00/14] sx9310 iio driver updates

[Daniel Campello]

The first patch resends the DT binding for the driver that was merged in
v5.8-rc1 with a small change to update for proper regulators. The second
through the eleventh patch fixes several issues dropped from v8 to v9
when the initial patch was merged. The twelveth patch fixes a few
printks that are missing newlines and should be totally non-trivial to
apply. The thirteenth patch drops channel_users because it's unused. The
final patch adds support to enable the svdd and vdd supplies so that
this driver can work on a board where the svdd supply isn't enabled at
boot and needs to be turned on before this driver starts to communicate
with the chip.

Changes in v2:
 - Added #io-channel-cells as a required property
 - Reordered error handling on sx9310_resume()
 - Added #include <linux/mod_devicetable.h>
 - Added '\n' to dev_err()
 - Fixed commit message from "iio: sx9310: Align memory"
 - Changed prox_stat to chan_prox_stat bitmap.
 - Fixed dev_err() message
 - Added '\n' to dev_err()

Daniel Campello (12):
  dt-bindings: iio: Add bindings for sx9310 sensor
  iio: sx9310: Update macros declarations
  iio: sx9310: Fix irq handling
  iio: sx9310: Remove acpi and of table macros
  iio: sx9310: Change from .probe to .probe_new
  iio: sx9310: Fixes various memory handling
  iio: sx9310: Use long instead of int for channel bitmaps
  iio: sx9310: Use regmap_read_poll_timeout() for compensation
  iio: sx9310: Update copyright
  iio: sx9310: Simplify error return handling
  iio: sx9310: Use variable to hold &client->dev
  iio: sx9310: Miscellaneous format fixes

Stephen Boyd (2):
  iio: sx9310: Drop channel_users[]
  iio: sx9310: Enable vdd and svdd regulators at probe

 .../iio/proximity/semtech,sx9310.yaml         |  65 +++
 drivers/iio/proximity/sx9310.c                | 424 +++++++++---------
 2 files changed, 277 insertions(+), 212 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml

--
2.28.0.163.g6104cc2f0b6-goog

[PATCH v2 01/14] dt-bindings: iio: Add bindings for sx9310 sensor

[Daniel Campello]

Adds device tree bandings for sx9310 sensor.

Signed-off-by: Daniel Campello <campello@chromium.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Rob Herring <robh+dt@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
[swboyd@chromium.org: Add both regulators and make them optional]
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---

Changes in v2:
 - Added #io-channel-cells as a required property

 .../iio/proximity/semtech,sx9310.yaml         | 65 +++++++++++++++++++
 1 file changed, 65 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml

diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
new file mode 100644
index 00000000000000..5739074d3592fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9310.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Semtech's SX9310 capacitive proximity sensor
+
+maintainers:
+  - Daniel Campello <campello@chromium.org>
+
+description: |
+  Semtech's SX9310/SX9311 capacitive proximity/button solution.
+
+  Specifications about the devices can be found at:
+  https://www.semtech.com/products/smart-sensing/sar-sensors/sx9310
+
+properties:
+  compatible:
+    enum:
+      - semtech,sx9310
+      - semtech,sx9311
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      The sole interrupt generated by the device used to announce the
+      preceding reading request has finished and that data is
+      available or that a close/far proximity event has happened.
+    maxItems: 1
+
+  vdd-supply:
+    description: Main power supply
+
+  svdd-supply:
+    description: Host interface power supply
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      proximity@28 {
+        compatible = "semtech,sx9310";
+        reg = <0x28>;
+        interrupt-parent = <&pio>;
+        interrupts = <5 IRQ_TYPE_LEVEL_LOW 5>;
+        vdd-supply = <&pp3300_a>;
+        svdd-supply = <&pp1800_prox>;
+        #io-channel-cells = <1>;
+      };
+    };
-- 
2.28.0.163.g6104cc2f0b6-goog

Re: [PATCH v2 01/14] dt-bindings: iio: Add bindings for sx9310 sensor

[Stephen Boyd]

Quoting Daniel Campello (2020-07-28 16:05:07)
> Adds device tree bandings for sx9310 sensor.

s/bandings/bindings/

Not sure why I didn't notice this before.

> 
> Signed-off-by: Daniel Campello <campello@chromium.org>
> Cc: Hartmut Knaack <knaack.h@gmx.de>
> Cc: Lars-Peter Clausen <lars@metafoo.de>
> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
> Cc: Rob Herring <robh+dt@kernel.org>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> [swboyd@chromium.org: Add both regulators and make them optional]
> Signed-off-by: Stephen Boyd <swboyd@chromium.org>
> ---
> 
> Changes in v2:
>  - Added #io-channel-cells as a required property

Thanks!

[PATCH v2 02/14] iio: sx9310: Update macros declarations

[Daniel Campello]

Follows spec sheet for macro declarations.

Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---

Changes in v2: None

 drivers/iio/proximity/sx9310.c | 143 +++++++++++++++------------------
 1 file changed, 67 insertions(+), 76 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index d161f3061e353d..07895d4b935d12 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -33,45 +33,45 @@
 #define SX9310_REG_IRQ_SRC				0x00
 #define SX9310_REG_STAT0				0x01
 #define SX9310_REG_STAT1				0x02
+#define SX9310_REG_STAT1_COMPSTAT_MASK			GENMASK(3, 0)
 #define SX9310_REG_IRQ_MSK				0x03
 #define   SX9310_CONVDONE_IRQ				BIT(3)
 #define   SX9310_FAR_IRQ				BIT(5)
 #define   SX9310_CLOSE_IRQ				BIT(6)
-#define   SX9310_EVENT_IRQ				(SX9310_FAR_IRQ | \
-							 SX9310_CLOSE_IRQ)
 #define SX9310_REG_IRQ_FUNC				0x04
 
 #define SX9310_REG_PROX_CTRL0				0x10
-#define   SX9310_REG_PROX_CTRL0_PROXSTAT2		0x10
-#define   SX9310_REG_PROX_CTRL0_EN_MASK			0x0F
+#define   SX9310_REG_PROX_CTRL0_SENSOREN_MASK		GENMASK(3, 0)
+#define   SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK		GENMASK(7, 4)
+#define   SX9310_REG_PROX_CTRL0_SCANPERIOD_SHIFT	4
+#define   SX9310_REG_PROX_CTRL0_SCANPERIOD_15MS		0x01
 #define SX9310_REG_PROX_CTRL1				0x11
 #define SX9310_REG_PROX_CTRL2				0x12
-#define   SX9310_REG_PROX_CTRL2_COMBMODE_ALL		0x80
-#define   SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC	0x04
+#define   SX9310_REG_PROX_CTRL2_COMBMODE_CS1_CS2	(0x02 << 6)
+#define   SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC	(0x01 << 2)
 #define SX9310_REG_PROX_CTRL3				0x13
-#define   SX9310_REG_PROX_CTRL3_GAIN0_X8		0x0c
+#define   SX9310_REG_PROX_CTRL3_GAIN0_X8		(0x03 << 2)
 #define   SX9310_REG_PROX_CTRL3_GAIN12_X4		0x02
 #define SX9310_REG_PROX_CTRL4				0x14
 #define   SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST	0x07
 #define SX9310_REG_PROX_CTRL5				0x15
-#define   SX9310_REG_PROX_CTRL5_RANGE_SMALL		0xc0
-#define   SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1		0x04
+#define   SX9310_REG_PROX_CTRL5_RANGE_SMALL		(0x03 << 6)
+#define   SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1		(0x01 << 2)
 #define   SX9310_REG_PROX_CTRL5_RAWFILT_1P25		0x02
 #define SX9310_REG_PROX_CTRL6				0x16
-#define   SX9310_REG_PROX_CTRL6_COMP_COMMON		0x20
+#define   SX9310_REG_PROX_CTRL6_AVGTHRESH_DEFAULT	0x20
 #define SX9310_REG_PROX_CTRL7				0x17
-#define   SX9310_REG_PROX_CTRL7_AVGNEGFILT_2		0x08
+#define   SX9310_REG_PROX_CTRL7_AVGNEGFILT_2		(0x01 << 3)
 #define   SX9310_REG_PROX_CTRL7_AVGPOSFILT_512		0x05
 #define SX9310_REG_PROX_CTRL8				0x18
 #define SX9310_REG_PROX_CTRL9				0x19
-#define   SX9310_REG_PROX_CTRL8_9_PTHRESH12_28		0x40
-#define   SX9310_REG_PROX_CTRL8_9_PTHRESH_96		0x88
+#define   SX9310_REG_PROX_CTRL8_9_PTHRESH_28		(0x08 << 3)
+#define   SX9310_REG_PROX_CTRL8_9_PTHRESH_96		(0x11 << 3)
 #define   SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900	0x03
 #define   SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500	0x05
 #define SX9310_REG_PROX_CTRL10				0x1a
-#define   SX9310_REG_PROX_CTRL10_HYST_6PCT		0x10
-#define   SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_8	0x12
-#define   SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_8		0x03
+#define   SX9310_REG_PROX_CTRL10_HYST_6PCT		(0x01 << 4)
+#define   SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_2		0x01
 #define SX9310_REG_PROX_CTRL11				0x1b
 #define SX9310_REG_PROX_CTRL12				0x1c
 #define SX9310_REG_PROX_CTRL13				0x1d
@@ -82,8 +82,8 @@
 #define SX9310_REG_PROX_CTRL18				0x22
 #define SX9310_REG_PROX_CTRL19				0x23
 #define SX9310_REG_SAR_CTRL0				0x2a
-#define   SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES		0x40
-#define   SX9310_REG_SAR_CTRL0_SARHYST_8		0x10
+#define   SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES		(0x02 << 5)
+#define   SX9310_REG_SAR_CTRL0_SARHYST_8		(0x02 << 3)
 #define SX9310_REG_SAR_CTRL1				0x2b
 /* Each increment of the slope register is 0.0078125. */
 #define   SX9310_REG_SAR_CTRL1_SLOPE(_hnslope)		(_hnslope / 78125)
@@ -107,7 +107,7 @@
 #define SX9310_REG_SAR_MSB				0x39
 #define SX9310_REG_SAR_LSB				0x3a
 
-#define SX9310_REG_I2CADDR				0x40
+#define SX9310_REG_I2C_ADDR				0x40
 #define SX9310_REG_PAUSE				0x41
 #define SX9310_REG_WHOAMI				0x42
 #define   SX9310_WHOAMI_VALUE				0x01
@@ -116,14 +116,9 @@
 #define SX9310_REG_RESET				0x7f
 #define   SX9310_SOFT_RESET				0xde
 
-#define SX9310_SCAN_PERIOD_MASK				GENMASK(7, 4)
-#define SX9310_SCAN_PERIOD_SHIFT			4
-
-#define SX9310_COMPSTAT_MASK				GENMASK(3, 0)
 
 /* 4 hardware channels, as defined in STAT0: COMB, CS2, CS1 and CS0. */
 #define SX9310_NUM_CHANNELS				4
-#define SX9310_CHAN_ENABLED_MASK			GENMASK(3, 0)
 
 struct sx9310_data {
 	/* Serialize access to registers and channel configuration */
@@ -251,7 +246,7 @@ static const struct regmap_range sx9310_readable_reg_ranges[] = {
 	regmap_reg_range(SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL19),
 	regmap_reg_range(SX9310_REG_SAR_CTRL0, SX9310_REG_SAR_CTRL2),
 	regmap_reg_range(SX9310_REG_SENSOR_SEL, SX9310_REG_SAR_LSB),
-	regmap_reg_range(SX9310_REG_I2CADDR, SX9310_REG_WHOAMI),
+	regmap_reg_range(SX9310_REG_I2C_ADDR, SX9310_REG_WHOAMI),
 	regmap_reg_range(SX9310_REG_RESET, SX9310_REG_RESET),
 };
 
@@ -292,7 +287,7 @@ static int sx9310_update_chan_en(struct sx9310_data *data,
 
 	if ((data->chan_read | data->chan_event) != (chan_read | chan_event)) {
 		ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL0,
-					 SX9310_CHAN_ENABLED_MASK,
+					 SX9310_REG_PROX_CTRL0_SENSOREN_MASK,
 					 chan_read | chan_event);
 		if (ret)
 			return ret;
@@ -361,7 +356,8 @@ static int sx9310_wait_for_sample(struct sx9310_data *data)
 	if (ret < 0)
 		return ret;
 
-	val = (val & SX9310_SCAN_PERIOD_MASK) >> SX9310_SCAN_PERIOD_SHIFT;
+	val = (val & SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK) >>
+	      SX9310_REG_PROX_CTRL0_SCANPERIOD_SHIFT;
 
 	msleep(sx9310_scan_period_table[val]);
 
@@ -435,7 +431,8 @@ static int sx9310_read_samp_freq(struct sx9310_data *data, int *val, int *val2)
 	if (ret < 0)
 		return ret;
 
-	regval = (regval & SX9310_SCAN_PERIOD_MASK) >> SX9310_SCAN_PERIOD_SHIFT;
+	regval = (regval & SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK) >>
+		 SX9310_REG_PROX_CTRL0_SCANPERIOD_SHIFT;
 	*val = sx9310_samp_freq_table[regval].val;
 	*val2 = sx9310_samp_freq_table[regval].val2;
 
@@ -483,8 +480,8 @@ static int sx9310_set_samp_freq(struct sx9310_data *data, int val, int val2)
 	mutex_lock(&data->mutex);
 
 	ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL0,
-				 SX9310_SCAN_PERIOD_MASK,
-				 i << SX9310_SCAN_PERIOD_SHIFT);
+				 SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK,
+				 i << SX9310_REG_PROX_CTRL0_SCANPERIOD_SHIFT);
 
 	mutex_unlock(&data->mutex);
 
@@ -572,7 +569,7 @@ static irqreturn_t sx9310_irq_thread_handler(int irq, void *private)
 		goto out;
 	}
 
-	if (val & SX9310_EVENT_IRQ)
+	if (val & (SX9310_FAR_IRQ | SX9310_CLOSE_IRQ))
 		sx9310_push_events(indio_dev);
 
 	if (val & SX9310_CONVDONE_IRQ)
@@ -600,6 +597,7 @@ static int sx9310_write_event_config(struct iio_dev *indio_dev,
 				     enum iio_event_direction dir, int state)
 {
 	struct sx9310_data *data = iio_priv(indio_dev);
+	unsigned int eventirq = SX9310_FAR_IRQ | SX9310_CLOSE_IRQ;
 	int ret;
 
 	/* If the state hasn't changed, there's nothing to do. */
@@ -612,7 +610,7 @@ static int sx9310_write_event_config(struct iio_dev *indio_dev,
 		if (ret < 0)
 			goto out_unlock;
 		if (!(data->chan_event & ~BIT(chan->channel))) {
-			ret = sx9310_enable_irq(data, SX9310_EVENT_IRQ);
+			ret = sx9310_enable_irq(data, eventirq);
 			if (ret < 0)
 				sx9310_put_event_channel(data, chan->channel);
 		}
@@ -621,7 +619,7 @@ static int sx9310_write_event_config(struct iio_dev *indio_dev,
 		if (ret < 0)
 			goto out_unlock;
 		if (!data->chan_event) {
-			ret = sx9310_disable_irq(data, SX9310_EVENT_IRQ);
+			ret = sx9310_disable_irq(data, eventirq);
 			if (ret < 0)
 				sx9310_get_event_channel(data, chan->channel);
 		}
@@ -746,53 +744,46 @@ struct sx9310_reg_default {
 	u8 def;
 };
 
-#define SX_INIT(_reg, _def)			\
-	{					\
-		.reg = SX9310_REG_##_reg,	\
-		.def = _def,			\
-	}
-
 static const struct sx9310_reg_default sx9310_default_regs[] = {
-	SX_INIT(IRQ_MSK, 0x00),
-	SX_INIT(IRQ_FUNC, 0x00),
+	{ SX9310_REG_IRQ_MSK, 0x00 },
+	{ SX9310_REG_IRQ_FUNC, 0x00 },
 	/*
 	 * The lower 4 bits should not be set as it enable sensors measurements.
 	 * Turning the detection on before the configuration values are set to
 	 * good values can cause the device to return erroneous readings.
 	 */
-	SX_INIT(PROX_CTRL0, SX9310_REG_PROX_CTRL0_PROXSTAT2),
-	SX_INIT(PROX_CTRL1, 0x00),
-	SX_INIT(PROX_CTRL2, SX9310_REG_PROX_CTRL2_COMBMODE_ALL |
-			    SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC),
-	SX_INIT(PROX_CTRL3, SX9310_REG_PROX_CTRL3_GAIN0_X8 |
-			    SX9310_REG_PROX_CTRL3_GAIN12_X4),
-	SX_INIT(PROX_CTRL4, SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST),
-	SX_INIT(PROX_CTRL5, SX9310_REG_PROX_CTRL5_RANGE_SMALL |
-			    SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1 |
-			    SX9310_REG_PROX_CTRL5_RAWFILT_1P25),
-	SX_INIT(PROX_CTRL6, SX9310_REG_PROX_CTRL6_COMP_COMMON),
-	SX_INIT(PROX_CTRL7, SX9310_REG_PROX_CTRL7_AVGNEGFILT_2 |
-			    SX9310_REG_PROX_CTRL7_AVGPOSFILT_512),
-	SX_INIT(PROX_CTRL8, SX9310_REG_PROX_CTRL8_9_PTHRESH_96 |
-			    SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500),
-	SX_INIT(PROX_CTRL9, SX9310_REG_PROX_CTRL8_9_PTHRESH12_28 |
-			    SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900),
-	SX_INIT(PROX_CTRL10, SX9310_REG_PROX_CTRL10_HYST_6PCT |
-			     SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_8 |
-			     SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_8),
-	SX_INIT(PROX_CTRL11, 0x00),
-	SX_INIT(PROX_CTRL12, 0x00),
-	SX_INIT(PROX_CTRL13, 0x00),
-	SX_INIT(PROX_CTRL14, 0x00),
-	SX_INIT(PROX_CTRL15, 0x00),
-	SX_INIT(PROX_CTRL16, 0x00),
-	SX_INIT(PROX_CTRL17, 0x00),
-	SX_INIT(PROX_CTRL18, 0x00),
-	SX_INIT(PROX_CTRL19, 0x00),
-	SX_INIT(SAR_CTRL0, SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES |
-			   SX9310_REG_SAR_CTRL0_SARHYST_8),
-	SX_INIT(SAR_CTRL1, SX9310_REG_SAR_CTRL1_SLOPE(10781250)),
-	SX_INIT(SAR_CTRL2, SX9310_REG_SAR_CTRL2_SAROFFSET_DEFAULT),
+	{ SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL0_SCANPERIOD_15MS },
+	{ SX9310_REG_PROX_CTRL1, 0x00 },
+	{ SX9310_REG_PROX_CTRL2, SX9310_REG_PROX_CTRL2_COMBMODE_CS1_CS2 |
+				 SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC },
+	{ SX9310_REG_PROX_CTRL3, SX9310_REG_PROX_CTRL3_GAIN0_X8 |
+				 SX9310_REG_PROX_CTRL3_GAIN12_X4 },
+	{ SX9310_REG_PROX_CTRL4, SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST },
+	{ SX9310_REG_PROX_CTRL5, SX9310_REG_PROX_CTRL5_RANGE_SMALL |
+				 SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1 |
+				 SX9310_REG_PROX_CTRL5_RAWFILT_1P25 },
+	{ SX9310_REG_PROX_CTRL6, SX9310_REG_PROX_CTRL6_AVGTHRESH_DEFAULT },
+	{ SX9310_REG_PROX_CTRL7, SX9310_REG_PROX_CTRL7_AVGNEGFILT_2 |
+				 SX9310_REG_PROX_CTRL7_AVGPOSFILT_512 },
+	{ SX9310_REG_PROX_CTRL8, SX9310_REG_PROX_CTRL8_9_PTHRESH_96 |
+				 SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500 },
+	{ SX9310_REG_PROX_CTRL9, SX9310_REG_PROX_CTRL8_9_PTHRESH_28 |
+				 SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900 },
+	{ SX9310_REG_PROX_CTRL10, SX9310_REG_PROX_CTRL10_HYST_6PCT |
+				  SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_2 },
+	{ SX9310_REG_PROX_CTRL11, 0x00 },
+	{ SX9310_REG_PROX_CTRL12, 0x00 },
+	{ SX9310_REG_PROX_CTRL13, 0x00 },
+	{ SX9310_REG_PROX_CTRL14, 0x00 },
+	{ SX9310_REG_PROX_CTRL15, 0x00 },
+	{ SX9310_REG_PROX_CTRL16, 0x00 },
+	{ SX9310_REG_PROX_CTRL17, 0x00 },
+	{ SX9310_REG_PROX_CTRL18, 0x00 },
+	{ SX9310_REG_PROX_CTRL19, 0x00 },
+	{ SX9310_REG_SAR_CTRL0, SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES |
+				SX9310_REG_SAR_CTRL0_SARHYST_8 },
+	{ SX9310_REG_SAR_CTRL1, SX9310_REG_SAR_CTRL1_SLOPE(10781250) },
+	{ SX9310_REG_SAR_CTRL2, SX9310_REG_SAR_CTRL2_SAROFFSET_DEFAULT },
 };
 
 /* Activate all channels and perform an initial compensation. */
@@ -809,7 +800,7 @@ static int sx9310_init_compensation(struct iio_dev *indio_dev)
 
 	/* run the compensation phase on all channels */
 	ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0,
-			   ctrl0 | SX9310_REG_PROX_CTRL0_EN_MASK);
+			   ctrl0 | SX9310_REG_PROX_CTRL0_SENSOREN_MASK);
 	if (ret < 0)
 		return ret;
 
@@ -992,7 +983,7 @@ static int __maybe_unused sx9310_suspend(struct device *dev)
 	if (ret)
 		goto out;
 
-	ctrl0 = data->suspend_ctrl0 & ~SX9310_REG_PROX_CTRL0_EN_MASK;
+	ctrl0 = data->suspend_ctrl0 & ~SX9310_REG_PROX_CTRL0_SENSOREN_MASK;
 	ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, ctrl0);
 	if (ret)
 		goto out;
-- 
2.28.0.163.g6104cc2f0b6-goog

[PATCH v2 03/14] iio: sx9310: Fix irq handling

[Daniel Campello]

Fixes enable/disable irq handling at various points. The driver needs to
only enable/disable irqs if there is an actual irq handler installed.

Signed-off-by: Daniel Campello <campello@chromium.org>
---

Changes in v2:
 - Reordered error handling on sx9310_resume()

 drivers/iio/proximity/sx9310.c | 26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 07895d4b935d12..108d82ba81146e 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -376,13 +376,15 @@ static int sx9310_read_proximity(struct sx9310_data *data,
 	if (ret < 0)
 		goto out;
 
-	ret = sx9310_enable_irq(data, SX9310_CONVDONE_IRQ);
-	if (ret < 0)
-		goto out_put_channel;
+	if (data->client->irq) {
+		ret = sx9310_enable_irq(data, SX9310_CONVDONE_IRQ);
+		if (ret)
+			goto out_put_channel;
+	}
 
 	mutex_unlock(&data->mutex);
 
-	if (data->client->irq > 0) {
+	if (data->client->irq) {
 		ret = wait_for_completion_interruptible(&data->completion);
 		reinit_completion(&data->completion);
 	} else {
@@ -401,9 +403,11 @@ static int sx9310_read_proximity(struct sx9310_data *data,
 	*val = sign_extend32(be16_to_cpu(rawval),
 			     (chan->address == SX9310_REG_DIFF_MSB ? 11 : 15));
 
-	ret = sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
-	if (ret < 0)
-		goto out_put_channel;
+	if (data->client->irq) {
+		ret = sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
+		if (ret)
+			goto out_put_channel;
+	}
 
 	ret = sx9310_put_read_channel(data, chan->channel);
 	if (ret < 0)
@@ -414,7 +418,8 @@ static int sx9310_read_proximity(struct sx9310_data *data,
 	return IIO_VAL_INT;
 
 out_disable_irq:
-	sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
+	if (data->client->irq)
+		sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
 out_put_channel:
 	sx9310_put_read_channel(data, chan->channel);
 out:
@@ -1011,10 +1016,11 @@ static int __maybe_unused sx9310_resume(struct device *dev)
 
 out:
 	mutex_unlock(&data->mutex);
+	if (ret)
+		return ret;
 
 	enable_irq(data->client->irq);
-
-	return ret;
+	return 0;
 }
 
 static const struct dev_pm_ops sx9310_pm_ops = {
-- 
2.28.0.163.g6104cc2f0b6-goog

Re: [PATCH v2 03/14] iio: sx9310: Fix irq handling

[Stephen Boyd]

Quoting Daniel Campello (2020-07-28 16:05:09)
> Fixes enable/disable irq handling at various points. The driver needs to
> only enable/disable irqs if there is an actual irq handler installed.
> 
> Signed-off-by: Daniel Campello <campello@chromium.org>
> ---
> 
> Changes in v2:
>  - Reordered error handling on sx9310_resume()
> 
>  drivers/iio/proximity/sx9310.c | 26 ++++++++++++++++----------
>  1 file changed, 16 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
> index 07895d4b935d12..108d82ba81146e 100644
> --- a/drivers/iio/proximity/sx9310.c
> +++ b/drivers/iio/proximity/sx9310.c
> @@ -376,13 +376,15 @@ static int sx9310_read_proximity(struct sx9310_data *data,
>         if (ret < 0)
>                 goto out;
>  
> -       ret = sx9310_enable_irq(data, SX9310_CONVDONE_IRQ);
> -       if (ret < 0)
> -               goto out_put_channel;
> +       if (data->client->irq) {
> +               ret = sx9310_enable_irq(data, SX9310_CONVDONE_IRQ);

I still think it makes more sense to push the if condition inside the
enable/disable irq functions so that the call sites read simpler.

> +               if (ret)
> +                       goto out_put_channel;
> +       }
>  
>         mutex_unlock(&data->mutex);
>  
> -       if (data->client->irq > 0) {
> +       if (data->client->irq) {
>                 ret = wait_for_completion_interruptible(&data->completion);
>                 reinit_completion(&data->completion);
>         } else {
> @@ -401,9 +403,11 @@ static int sx9310_read_proximity(struct sx9310_data *data,
>         *val = sign_extend32(be16_to_cpu(rawval),
>                              (chan->address == SX9310_REG_DIFF_MSB ? 11 : 15));
>  
> -       ret = sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
> -       if (ret < 0)
> -               goto out_put_channel;
> +       if (data->client->irq) {
> +               ret = sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
> +               if (ret)
> +                       goto out_put_channel;
> +       }
>  
>         ret = sx9310_put_read_channel(data, chan->channel);
>         if (ret < 0)
> @@ -414,7 +418,8 @@ static int sx9310_read_proximity(struct sx9310_data *data,
>         return IIO_VAL_INT;
>  
>  out_disable_irq:
> -       sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
> +       if (data->client->irq)
> +               sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);

And so this isn't duplicated check.

>  out_put_channel:
>         sx9310_put_read_channel(data, chan->channel);
>  out:

[PATCH v2 04/14] iio: sx9310: Remove acpi and of table macros

[Daniel Campello]

Avoids unused warnings due to acpi/of table macros.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Daniel Campello <campello@chromium.org>
---

Changes in v2:
 - Added #include <linux/mod_devicetable.h>

 drivers/iio/proximity/sx9310.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 108d82ba81146e..04b646ae8a1009 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -15,8 +15,8 @@
 #include <linux/i2c.h>
 #include <linux/irq.h>
 #include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
 #include <linux/module.h>
-#include <linux/of.h>
 #include <linux/pm.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
@@ -1051,8 +1051,8 @@ MODULE_DEVICE_TABLE(i2c, sx9310_id);
 static struct i2c_driver sx9310_driver = {
 	.driver = {
 		.name	= "sx9310",
-		.acpi_match_table = ACPI_PTR(sx9310_acpi_match),
-		.of_match_table = of_match_ptr(sx9310_of_match),
+		.acpi_match_table = sx9310_acpi_match,
+		.of_match_table = sx9310_of_match,
 		.pm = &sx9310_pm_ops,
 	},
 	.probe		= sx9310_probe,
-- 
2.28.0.163.g6104cc2f0b6-goog

Re: [PATCH v2 04/14] iio: sx9310: Remove acpi and of table macros

[Andy Shevchenko]

On Wed, Jul 29, 2020 at 2:05 AM Daniel Campello <campello@chromium.org> wrote:
>
> Avoids unused warnings due to acpi/of table macros.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Reported-by: kbuild test robot <lkp@intel.com>
> Signed-off-by: Daniel Campello <campello@chromium.org>
> ---
>
> Changes in v2:
>  - Added #include <linux/mod_devicetable.h>
>
>  drivers/iio/proximity/sx9310.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
> index 108d82ba81146e..04b646ae8a1009 100644
> --- a/drivers/iio/proximity/sx9310.c
> +++ b/drivers/iio/proximity/sx9310.c
> @@ -15,8 +15,8 @@
>  #include <linux/i2c.h>
>  #include <linux/irq.h>
>  #include <linux/kernel.h>
> +#include <linux/mod_devicetable.h>
>  #include <linux/module.h>
> -#include <linux/of.h>
>  #include <linux/pm.h>
>  #include <linux/regmap.h>
>  #include <linux/slab.h>
> @@ -1051,8 +1051,8 @@ MODULE_DEVICE_TABLE(i2c, sx9310_id);
>  static struct i2c_driver sx9310_driver = {
>         .driver = {
>                 .name   = "sx9310",
> -               .acpi_match_table = ACPI_PTR(sx9310_acpi_match),
> -               .of_match_table = of_match_ptr(sx9310_of_match),
> +               .acpi_match_table = sx9310_acpi_match,
> +               .of_match_table = sx9310_of_match,
>                 .pm = &sx9310_pm_ops,
>         },
>         .probe          = sx9310_probe,
> --
> 2.28.0.163.g6104cc2f0b6-goog
>


-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v2 04/14] iio: sx9310: Remove acpi and of table macros

[Stephen Boyd]

Quoting Daniel Campello (2020-07-28 16:05:10)
> Avoids unused warnings due to acpi/of table macros.
> 
> Reported-by: kbuild test robot <lkp@intel.com>
> Signed-off-by: Daniel Campello <campello@chromium.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

[PATCH v2 05/14] iio: sx9310: Change from .probe to .probe_new

[Daniel Campello]

Uses .probe_new in place of .probe. Also uses device_get_match_data()
for whoami matching.

Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---

Changes in v2:
 - Added '\n' to dev_err()

 drivers/iio/proximity/sx9310.c | 39 ++++++++++++----------------------
 1 file changed, 14 insertions(+), 25 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 04b646ae8a1009..bb007673f758d5 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -139,7 +139,7 @@ struct sx9310_data {
 	struct completion completion;
 	unsigned int chan_read, chan_event;
 	int channel_users[SX9310_NUM_CHANNELS];
-	int whoami;
+	unsigned int whoami;
 };
 
 static const struct iio_event_spec sx9310_events[] = {
@@ -860,24 +860,15 @@ static int sx9310_init_device(struct iio_dev *indio_dev)
 
 static int sx9310_set_indio_dev_name(struct device *dev,
 				     struct iio_dev *indio_dev,
-				     const struct i2c_device_id *id, int whoami)
+				     unsigned int whoami)
 {
-	const struct acpi_device_id *acpi_id;
-
-	/* id will be NULL when enumerated via ACPI */
-	if (id) {
-		if (id->driver_data != whoami)
-			dev_err(dev, "WHOAMI does not match i2c_device_id: %s",
-				id->name);
-	} else if (ACPI_HANDLE(dev)) {
-		acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev);
-		if (!acpi_id)
-			return -ENODEV;
-		if (acpi_id->driver_data != whoami)
-			dev_err(dev, "WHOAMI does not match acpi_device_id: %s",
-				acpi_id->id);
-	} else
+	unsigned int long ddata;
+
+	ddata = (uintptr_t)device_get_match_data(dev);
+	if (ddata != whoami) {
+		dev_err(dev, "WHOAMI does not match device data: %u\n", whoami);
 		return -ENODEV;
+	}
 
 	switch (whoami) {
 	case SX9310_WHOAMI_VALUE:
@@ -887,15 +878,14 @@ static int sx9310_set_indio_dev_name(struct device *dev,
 		indio_dev->name = "sx9311";
 		break;
 	default:
-		dev_err(dev, "unexpected WHOAMI response: %u", whoami);
+		dev_err(dev, "unexpected WHOAMI response: %u\n", whoami);
 		return -ENODEV;
 	}
 
 	return 0;
 }
 
-static int sx9310_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int sx9310_probe(struct i2c_client *client)
 {
 	int ret;
 	struct iio_dev *indio_dev;
@@ -921,8 +911,7 @@ static int sx9310_probe(struct i2c_client *client,
 		return ret;
 	}
 
-	ret = sx9310_set_indio_dev_name(&client->dev, indio_dev, id,
-					data->whoami);
+	ret = sx9310_set_indio_dev_name(&client->dev, indio_dev, data->whoami);
 	if (ret < 0)
 		return ret;
 
@@ -1035,8 +1024,8 @@ static const struct acpi_device_id sx9310_acpi_match[] = {
 MODULE_DEVICE_TABLE(acpi, sx9310_acpi_match);
 
 static const struct of_device_id sx9310_of_match[] = {
-	{ .compatible = "semtech,sx9310" },
-	{ .compatible = "semtech,sx9311" },
+	{ .compatible = "semtech,sx9310", (void *)SX9310_WHOAMI_VALUE },
+	{ .compatible = "semtech,sx9311", (void *)SX9311_WHOAMI_VALUE },
 	{},
 };
 MODULE_DEVICE_TABLE(of, sx9310_of_match);
@@ -1055,7 +1044,7 @@ static struct i2c_driver sx9310_driver = {
 		.of_match_table = sx9310_of_match,
 		.pm = &sx9310_pm_ops,
 	},
-	.probe		= sx9310_probe,
+	.probe_new	= sx9310_probe,
 	.id_table	= sx9310_id,
 };
 module_i2c_driver(sx9310_driver);
-- 
2.28.0.163.g6104cc2f0b6-goog

[PATCH v2 06/14] iio: sx9310: Fixes various memory handling

[Daniel Campello]

Makes use __aligned(8) to ensure that the timestamp is correctly aligned
when we call io_push_to_buffers_with_timestamp().
Also makes use of sizeof() for regmap_bulk_read instead of static value.

Signed-off-by: Daniel Campello <campello@chromium.org>
---

Changes in v2:
 - Fixed commit message from "iio: sx9310: Align memory"

 drivers/iio/proximity/sx9310.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index bb007673f758d5..75e85dcd6b3572 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -132,8 +132,8 @@ struct sx9310_data {
 	 */
 	bool prox_stat[SX9310_NUM_CHANNELS];
 	bool trigger_enabled;
-	__be16 buffer[SX9310_NUM_CHANNELS +
-		      4]; /* 64-bit data + 64-bit timestamp */
+	/* 64-bit data + 64-bit timestamp buffer */
+	__be16 buffer[SX9310_NUM_CHANNELS + 4] __aligned(8);
 	/* Remember enabled channels and sample rate during suspend. */
 	unsigned int suspend_ctrl0;
 	struct completion completion;
@@ -340,7 +340,7 @@ static int sx9310_read_prox_data(struct sx9310_data *data,
 	if (ret < 0)
 		return ret;
 
-	return regmap_bulk_read(data->regmap, chan->address, val, 2);
+	return regmap_bulk_read(data->regmap, chan->address, val, sizeof(*val));
 }
 
 /*
-- 
2.28.0.163.g6104cc2f0b6-goog

[PATCH v2 07/14] iio: sx9310: Use long instead of int for channel bitmaps

[Daniel Campello]

Uses for_each_set_bit() macro to loop over channel bitmaps.

Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---

Changes in v2:
 - Changed prox_stat to chan_prox_stat bitmap.

 drivers/iio/proximity/sx9310.c | 38 ++++++++++++++++++----------------
 1 file changed, 20 insertions(+), 18 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 75e85dcd6b3572..1f04ab8507ec62 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -130,14 +130,15 @@ struct sx9310_data {
 	 * Last reading of the proximity status for each channel.
 	 * We only send an event to user space when this changes.
 	 */
-	bool prox_stat[SX9310_NUM_CHANNELS];
+	unsigned long chan_prox_stat;
 	bool trigger_enabled;
 	/* 64-bit data + 64-bit timestamp buffer */
 	__be16 buffer[SX9310_NUM_CHANNELS + 4] __aligned(8);
 	/* Remember enabled channels and sample rate during suspend. */
 	unsigned int suspend_ctrl0;
 	struct completion completion;
-	unsigned int chan_read, chan_event;
+	unsigned long chan_read;
+	unsigned long chan_event;
 	int channel_users[SX9310_NUM_CHANNELS];
 	unsigned int whoami;
 };
@@ -280,15 +281,16 @@ static const struct regmap_config sx9310_regmap_config = {
 };
 
 static int sx9310_update_chan_en(struct sx9310_data *data,
-				 unsigned int chan_read,
-				 unsigned int chan_event)
+				 unsigned long chan_read,
+				 unsigned long chan_event)
 {
 	int ret;
+	unsigned long channels = chan_read | chan_event;
 
-	if ((data->chan_read | data->chan_event) != (chan_read | chan_event)) {
+	if ((data->chan_read | data->chan_event) != channels) {
 		ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL0,
 					 SX9310_REG_PROX_CTRL0_SENSOREN_MASK,
-					 chan_read | chan_event);
+					 channels);
 		if (ret)
 			return ret;
 	}
@@ -531,6 +533,7 @@ static void sx9310_push_events(struct iio_dev *indio_dev)
 	unsigned int val, chan;
 	struct sx9310_data *data = iio_priv(indio_dev);
 	s64 timestamp = iio_get_time_ns(indio_dev);
+	unsigned long prox_changed;
 
 	/* Read proximity state on all channels */
 	ret = regmap_read(data->regmap, SX9310_REG_STAT0, &val);
@@ -539,24 +542,23 @@ static void sx9310_push_events(struct iio_dev *indio_dev)
 		return;
 	}
 
-	for (chan = 0; chan < SX9310_NUM_CHANNELS; chan++) {
+	/*
+	 * Only iterate over channels with changes on proximity status that have
+	 * events enabled.
+	 */
+	prox_changed = (data->chan_prox_stat ^ val) & data->chan_event;
+
+	for_each_set_bit(chan, &prox_changed, SX9310_NUM_CHANNELS) {
 		int dir;
 		u64 ev;
-		bool new_prox = val & BIT(chan);
-
-		if (!(data->chan_event & BIT(chan)))
-			continue;
-		if (new_prox == data->prox_stat[chan])
-			/* No change on this channel. */
-			continue;
 
-		dir = new_prox ? IIO_EV_DIR_FALLING : IIO_EV_DIR_RISING;
+		dir = val & BIT(chan) ? IIO_EV_DIR_FALLING : IIO_EV_DIR_RISING;
 		ev = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, chan,
 					  IIO_EV_TYPE_THRESH, dir);
 
 		iio_push_event(indio_dev, ev, timestamp);
-		data->prox_stat[chan] = new_prox;
 	}
+	data->chan_prox_stat = val;
 }
 
 static irqreturn_t sx9310_irq_thread_handler(int irq, void *private)
@@ -713,13 +715,13 @@ static irqreturn_t sx9310_trigger_handler(int irq, void *private)
 static int sx9310_buffer_preenable(struct iio_dev *indio_dev)
 {
 	struct sx9310_data *data = iio_priv(indio_dev);
-	unsigned int channels = 0;
+	unsigned long channels = 0;
 	int bit, ret;
 
 	mutex_lock(&data->mutex);
 	for_each_set_bit(bit, indio_dev->active_scan_mask,
 			 indio_dev->masklength)
-		channels |= BIT(indio_dev->channels[bit].channel);
+		__set_bit(indio_dev->channels[bit].channel, &channels);
 
 	ret = sx9310_update_chan_en(data, channels, data->chan_event);
 	mutex_unlock(&data->mutex);
-- 
2.28.0.163.g6104cc2f0b6-goog

Re: [PATCH v2 07/14] iio: sx9310: Use long instead of int for channel bitmaps

[Stephen Boyd]

Quoting Daniel Campello (2020-07-28 16:05:13)
> Uses for_each_set_bit() macro to loop over channel bitmaps.
> 
> Signed-off-by: Daniel Campello <campello@chromium.org>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> ---
> 
> Changes in v2:
>  - Changed prox_stat to chan_prox_stat bitmap.
> 
>  drivers/iio/proximity/sx9310.c | 38 ++++++++++++++++++----------------
>  1 file changed, 20 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
> index 75e85dcd6b3572..1f04ab8507ec62 100644
> --- a/drivers/iio/proximity/sx9310.c
> +++ b/drivers/iio/proximity/sx9310.c
> @@ -130,14 +130,15 @@ struct sx9310_data {
>          * Last reading of the proximity status for each channel.
>          * We only send an event to user space when this changes.
>          */
> -       bool prox_stat[SX9310_NUM_CHANNELS];
> +       unsigned long chan_prox_stat;

This can be DECLARE_BITMAP(chan_prox_stat, SX9310_NUM_CHANNELS)

>         bool trigger_enabled;
>         /* 64-bit data + 64-bit timestamp buffer */
>         __be16 buffer[SX9310_NUM_CHANNELS + 4] __aligned(8);
>         /* Remember enabled channels and sample rate during suspend. */
>         unsigned int suspend_ctrl0;
>         struct completion completion;
> -       unsigned int chan_read, chan_event;
> +       unsigned long chan_read;
> +       unsigned long chan_event;

Same for these?

>         int channel_users[SX9310_NUM_CHANNELS];
>         unsigned int whoami;
>  };
> @@ -280,15 +281,16 @@ static const struct regmap_config sx9310_regmap_config = {
>  };
>  
>  static int sx9310_update_chan_en(struct sx9310_data *data,
> -                                unsigned int chan_read,
> -                                unsigned int chan_event)
> +                                unsigned long chan_read,
> +                                unsigned long chan_event)
>  {
>         int ret;
> +       unsigned long channels = chan_read | chan_event;
>  
> -       if ((data->chan_read | data->chan_event) != (chan_read | chan_event)) {
> +       if ((data->chan_read | data->chan_event) != channels) {
>                 ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL0,
>                                          SX9310_REG_PROX_CTRL0_SENSOREN_MASK,
> -                                        chan_read | chan_event);
> +                                        channels);
>                 if (ret)
>                         return ret;
>         }
> @@ -531,6 +533,7 @@ static void sx9310_push_events(struct iio_dev *indio_dev)
>         unsigned int val, chan;
>         struct sx9310_data *data = iio_priv(indio_dev);
>         s64 timestamp = iio_get_time_ns(indio_dev);
> +       unsigned long prox_changed;
>  
>         /* Read proximity state on all channels */
>         ret = regmap_read(data->regmap, SX9310_REG_STAT0, &val);
> @@ -539,24 +542,23 @@ static void sx9310_push_events(struct iio_dev *indio_dev)
>                 return;
>         }
>  
> -       for (chan = 0; chan < SX9310_NUM_CHANNELS; chan++) {
> +       /*
> +        * Only iterate over channels with changes on proximity status that have
> +        * events enabled.
> +        */
> +       prox_changed = (data->chan_prox_stat ^ val) & data->chan_event;

I was expecting:


	bitmap_xor(&prox_changed, &data->chan_prox_stat, &val, SX9310_NUM_CHANNELS);
	bitmap_and(&prox_changed, &data->chan_event, SX9310_NUM_CHANNELS);
	
> +
> +       for_each_set_bit(chan, &prox_changed, SX9310_NUM_CHANNELS) {
>                 int dir;
>                 u64 ev;
> -               bool new_prox = val & BIT(chan);
> -
> -               if (!(data->chan_event & BIT(chan)))
> -                       continue;
> -               if (new_prox == data->prox_stat[chan])
> -                       /* No change on this channel. */
> -                       continue;
>  
> -               dir = new_prox ? IIO_EV_DIR_FALLING : IIO_EV_DIR_RISING;
> +               dir = val & BIT(chan) ? IIO_EV_DIR_FALLING : IIO_EV_DIR_RISING;
>                 ev = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, chan,
>                                           IIO_EV_TYPE_THRESH, dir);
>  
>                 iio_push_event(indio_dev, ev, timestamp);
> -               data->prox_stat[chan] = new_prox;
>         }
> +       data->chan_prox_stat = val;
>  }
>  
>  static irqreturn_t sx9310_irq_thread_handler(int irq, void *private)
> @@ -713,13 +715,13 @@ static irqreturn_t sx9310_trigger_handler(int irq, void *private)
>  static int sx9310_buffer_preenable(struct iio_dev *indio_dev)
>  {
>         struct sx9310_data *data = iio_priv(indio_dev);
> -       unsigned int channels = 0;
> +       unsigned long channels = 0;

Use DECLARE_BITMAP(channels, SX9310_NUM_CHANNELS)?

>         int bit, ret;
>  
>         mutex_lock(&data->mutex);
>         for_each_set_bit(bit, indio_dev->active_scan_mask,
>                          indio_dev->masklength)
> -               channels |= BIT(indio_dev->channels[bit].channel);
> +               __set_bit(indio_dev->channels[bit].channel, &channels);
>  
>         ret = sx9310_update_chan_en(data, channels, data->chan_event);
>         mutex_unlock(&data->mutex);

Re: [PATCH v2 07/14] iio: sx9310: Use long instead of int for channel bitmaps

[Andy Shevchenko]

On Wed, Jul 29, 2020 at 4:03 AM Stephen Boyd <swboyd@chromium.org> wrote:
> Quoting Daniel Campello (2020-07-28 16:05:13)
> > Uses for_each_set_bit() macro to loop over channel bitmaps.

...

> > +       unsigned long chan_prox_stat;
>
> This can be DECLARE_BITMAP(chan_prox_stat, SX9310_NUM_CHANNELS)

> > +       unsigned long chan_read;
> > +       unsigned long chan_event;
>
> Same for these?

...

> > +       prox_changed = (data->chan_prox_stat ^ val) & data->chan_event;
>
> I was expecting:
>
>
>         bitmap_xor(&prox_changed, &data->chan_prox_stat, &val, SX9310_NUM_CHANNELS);
>         bitmap_and(&prox_changed, &data->chan_event, SX9310_NUM_CHANNELS);

I agree with this. On a small number of channels (up to 32) it will be
reduced to simple operations, but will leave a possibility to have
more with easy redefine.

(though _and() above misses one argument AFAICT)

...

> > +       unsigned long channels = 0;
>
> Use DECLARE_BITMAP(channels, SX9310_NUM_CHANNELS)?


-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v2 07/14] iio: sx9310: Use long instead of int for channel bitmaps

[Daniel Campello]

On Wed, Jul 29, 2020 at 1:00 AM Andy Shevchenko
<andy.shevchenko@gmail.com> wrote:
>
> On Wed, Jul 29, 2020 at 4:03 AM Stephen Boyd <swboyd@chromium.org> wrote:
> > Quoting Daniel Campello (2020-07-28 16:05:13)
> > > Uses for_each_set_bit() macro to loop over channel bitmaps.
>
> ...
>
> > > +       unsigned long chan_prox_stat;
> >
> > This can be DECLARE_BITMAP(chan_prox_stat, SX9310_NUM_CHANNELS)
>
> > > +       unsigned long chan_read;
> > > +       unsigned long chan_event;
> >
> > Same for these?
All of these are eventually used by regmap_update_bits() which expects
unsigned int. I believe the extra complexity is not worth it given the
number of channels.
>
> ...
>
> > > +       prox_changed = (data->chan_prox_stat ^ val) & data->chan_event;
> >
> > I was expecting:
> >
> >
> >         bitmap_xor(&prox_changed, &data->chan_prox_stat, &val, SX9310_NUM_CHANNELS);
> >         bitmap_and(&prox_changed, &data->chan_event, SX9310_NUM_CHANNELS);
>
> I agree with this. On a small number of channels (up to 32) it will be
> reduced to simple operations, but will leave a possibility to have
> more with easy redefine.
>
> (though _and() above misses one argument AFAICT)
>
> ...
>
> > > +       unsigned long channels = 0;
> >
> > Use DECLARE_BITMAP(channels, SX9310_NUM_CHANNELS)?
>
>
> --
> With Best Regards,
> Andy Shevchenko

Re: [PATCH v2 07/14] iio: sx9310: Use long instead of int for channel bitmaps

[Andy Shevchenko]

On Fri, Jul 31, 2020 at 6:45 PM Daniel Campello <campello@chromium.org> wrote:
> On Wed, Jul 29, 2020 at 1:00 AM Andy Shevchenko
> <andy.shevchenko@gmail.com> wrote:
> >
> > On Wed, Jul 29, 2020 at 4:03 AM Stephen Boyd <swboyd@chromium.org> wrote:
> > > Quoting Daniel Campello (2020-07-28 16:05:13)
> > > > Uses for_each_set_bit() macro to loop over channel bitmaps.
> >
> > ...
> >
> > > > +       unsigned long chan_prox_stat;
> > >
> > > This can be DECLARE_BITMAP(chan_prox_stat, SX9310_NUM_CHANNELS)
> >
> > > > +       unsigned long chan_read;
> > > > +       unsigned long chan_event;
> > >
> > > Same for these?
> All of these are eventually used by regmap_update_bits() which expects
> unsigned int. I believe the extra complexity is not worth it given the
> number of channels.

Okay then. Good to have some build check for the limitation, so, what
about adding

static_assert(..._NUM_CHANNELS < BITS_PER_LONG);
after the _NUM_CHANNELS definition?

-- 
With Best Regards,
Andy Shevchenko

[PATCH v2 08/14] iio: sx9310: Use regmap_read_poll_timeout() for compensation

[Daniel Campello]

Simplify compensation stage by using regmap_read_poll_timeout().

Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---

Changes in v2:
 - Fixed dev_err() message

 drivers/iio/proximity/sx9310.c | 25 ++++++++++---------------
 1 file changed, 10 insertions(+), 15 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 1f04ab8507ec62..f7f44fd9198499 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -797,7 +797,7 @@ static const struct sx9310_reg_default sx9310_default_regs[] = {
 static int sx9310_init_compensation(struct iio_dev *indio_dev)
 {
 	struct sx9310_data *data = iio_priv(indio_dev);
-	int i, ret;
+	int ret;
 	unsigned int val;
 	unsigned int ctrl0;
 
@@ -811,22 +811,17 @@ static int sx9310_init_compensation(struct iio_dev *indio_dev)
 	if (ret < 0)
 		return ret;
 
-	for (i = 100; i >= 0; i--) {
-		msleep(20);
-		ret = regmap_read(data->regmap, SX9310_REG_STAT1, &val);
-		if (ret < 0)
-			goto out;
-		if (!(val & SX9310_COMPSTAT_MASK))
-			break;
-	}
-
-	if (i < 0) {
-		dev_err(&data->client->dev,
-			"initial compensation timed out: 0x%02x", val);
-		ret = -ETIMEDOUT;
+	ret = regmap_read_poll_timeout(data->regmap, SX9310_REG_STAT1, val,
+				       !(val & SX9310_REG_STAT1_COMPSTAT_MASK),
+				       20000, 2000000);
+	if (ret) {
+		if (ret == -ETIMEDOUT)
+			dev_err(&data->client->dev,
+				"initial compensation timed out: 0x%02x\n",
+				val);
+		return ret;
 	}
 
-out:
 	regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, ctrl0);
 	return ret;
 }
-- 
2.28.0.163.g6104cc2f0b6-goog

[PATCH v2 09/14] iio: sx9310: Update copyright

[Daniel Campello]

Fixes wrong copyright year.

Signed-off-by: Daniel Campello <campello@chromium.org>
---

Changes in v2: None

 drivers/iio/proximity/sx9310.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index f7f44fd9198499..964fae90fefc25 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -1,13 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright 2018 Google LLC.
+ * Copyright 2020 Google LLC.
  *
  * Driver for Semtech's SX9310/SX9311 capacitive proximity/button solution.
  * Based on SX9500 driver and Semtech driver using the input framework
  * <https://my.syncplicity.com/share/teouwsim8niiaud/
  *          linux-driver-SX9310_NoSmartHSensing>.
- * Reworked April 2019 by Evan Green <evgreen@chromium.org>
- * and January 2020 by Daniel Campello <campello@chromium.org>
+ * Reworked in April 2019 by Evan Green <evgreen@chromium.org>
+ * and in January 2020 by Daniel Campello <campello@chromium.org>.
  */
 
 #include <linux/acpi.h>
-- 
2.28.0.163.g6104cc2f0b6-goog

[PATCH v2 10/14] iio: sx9310: Simplify error return handling

[Daniel Campello]

Checks for non-zero return values to signal error conditions.

Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---

Changes in v2: None

 drivers/iio/proximity/sx9310.c | 52 +++++++++++++++++-----------------
 1 file changed, 26 insertions(+), 26 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 964fae90fefc25..f43ca6a0acf2fc 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -339,7 +339,7 @@ static int sx9310_read_prox_data(struct sx9310_data *data,
 	int ret;
 
 	ret = regmap_write(data->regmap, SX9310_REG_SENSOR_SEL, chan->channel);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	return regmap_bulk_read(data->regmap, chan->address, val, sizeof(*val));
@@ -355,7 +355,7 @@ static int sx9310_wait_for_sample(struct sx9310_data *data)
 	unsigned int val;
 
 	ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &val);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	val = (val & SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK) >>
@@ -369,13 +369,13 @@ static int sx9310_wait_for_sample(struct sx9310_data *data)
 static int sx9310_read_proximity(struct sx9310_data *data,
 				 const struct iio_chan_spec *chan, int *val)
 {
-	int ret = 0;
+	int ret;
 	__be16 rawval;
 
 	mutex_lock(&data->mutex);
 
 	ret = sx9310_get_read_channel(data, chan->channel);
-	if (ret < 0)
+	if (ret)
 		goto out;
 
 	if (data->client->irq) {
@@ -395,11 +395,11 @@ static int sx9310_read_proximity(struct sx9310_data *data,
 
 	mutex_lock(&data->mutex);
 
-	if (ret < 0)
+	if (ret)
 		goto out_disable_irq;
 
 	ret = sx9310_read_prox_data(data, chan, &rawval);
-	if (ret < 0)
+	if (ret)
 		goto out_disable_irq;
 
 	*val = sign_extend32(be16_to_cpu(rawval),
@@ -412,7 +412,7 @@ static int sx9310_read_proximity(struct sx9310_data *data,
 	}
 
 	ret = sx9310_put_read_channel(data, chan->channel);
-	if (ret < 0)
+	if (ret)
 		goto out;
 
 	mutex_unlock(&data->mutex);
@@ -435,7 +435,7 @@ static int sx9310_read_samp_freq(struct sx9310_data *data, int *val, int *val2)
 	unsigned int regval;
 	int ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &regval);
 
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	regval = (regval & SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK) >>
@@ -537,7 +537,7 @@ static void sx9310_push_events(struct iio_dev *indio_dev)
 
 	/* Read proximity state on all channels */
 	ret = regmap_read(data->regmap, SX9310_REG_STAT0, &val);
-	if (ret < 0) {
+	if (ret) {
 		dev_err(&data->client->dev, "i2c transfer error in irq\n");
 		return;
 	}
@@ -571,7 +571,7 @@ static irqreturn_t sx9310_irq_thread_handler(int irq, void *private)
 	mutex_lock(&data->mutex);
 
 	ret = regmap_read(data->regmap, SX9310_REG_IRQ_SRC, &val);
-	if (ret < 0) {
+	if (ret) {
 		dev_err(&data->client->dev, "i2c transfer error in irq\n");
 		goto out;
 	}
@@ -614,20 +614,20 @@ static int sx9310_write_event_config(struct iio_dev *indio_dev,
 	mutex_lock(&data->mutex);
 	if (state) {
 		ret = sx9310_get_event_channel(data, chan->channel);
-		if (ret < 0)
+		if (ret)
 			goto out_unlock;
 		if (!(data->chan_event & ~BIT(chan->channel))) {
 			ret = sx9310_enable_irq(data, eventirq);
-			if (ret < 0)
+			if (ret)
 				sx9310_put_event_channel(data, chan->channel);
 		}
 	} else {
 		ret = sx9310_put_event_channel(data, chan->channel);
-		if (ret < 0)
+		if (ret)
 			goto out_unlock;
 		if (!data->chan_event) {
 			ret = sx9310_disable_irq(data, eventirq);
-			if (ret < 0)
+			if (ret)
 				sx9310_get_event_channel(data, chan->channel);
 		}
 	}
@@ -666,7 +666,7 @@ static int sx9310_set_trigger_state(struct iio_trigger *trig, bool state)
 		ret = sx9310_enable_irq(data, SX9310_CONVDONE_IRQ);
 	else if (!data->chan_read)
 		ret = sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
-	if (ret < 0)
+	if (ret)
 		goto out;
 
 	data->trigger_enabled = state;
@@ -695,7 +695,7 @@ static irqreturn_t sx9310_trigger_handler(int irq, void *private)
 			 indio_dev->masklength) {
 		ret = sx9310_read_prox_data(data, &indio_dev->channels[bit],
 					    &val);
-		if (ret < 0)
+		if (ret)
 			goto out;
 
 		data->buffer[i++] = val;
@@ -802,13 +802,13 @@ static int sx9310_init_compensation(struct iio_dev *indio_dev)
 	unsigned int ctrl0;
 
 	ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &ctrl0);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	/* run the compensation phase on all channels */
 	ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0,
 			   ctrl0 | SX9310_REG_PROX_CTRL0_SENSOREN_MASK);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	ret = regmap_read_poll_timeout(data->regmap, SX9310_REG_STAT1, val,
@@ -834,21 +834,21 @@ static int sx9310_init_device(struct iio_dev *indio_dev)
 	unsigned int i, val;
 
 	ret = regmap_write(data->regmap, SX9310_REG_RESET, SX9310_SOFT_RESET);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	usleep_range(1000, 2000); /* power-up time is ~1ms. */
 
 	/* Clear reset interrupt state by reading SX9310_REG_IRQ_SRC. */
 	ret = regmap_read(data->regmap, SX9310_REG_IRQ_SRC, &val);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	/* Program some sane defaults. */
 	for (i = 0; i < ARRAY_SIZE(sx9310_default_regs); i++) {
 		initval = &sx9310_default_regs[i];
 		ret = regmap_write(data->regmap, initval->reg, initval->def);
-		if (ret < 0)
+		if (ret)
 			return ret;
 	}
 
@@ -902,14 +902,14 @@ static int sx9310_probe(struct i2c_client *client)
 		return PTR_ERR(data->regmap);
 
 	ret = regmap_read(data->regmap, SX9310_REG_WHOAMI, &data->whoami);
-	if (ret < 0) {
+	if (ret) {
 		dev_err(&client->dev, "error in reading WHOAMI register: %d",
 			ret);
 		return ret;
 	}
 
 	ret = sx9310_set_indio_dev_name(&client->dev, indio_dev, data->whoami);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	ACPI_COMPANION_SET(&indio_dev->dev, ACPI_COMPANION(&client->dev));
@@ -921,7 +921,7 @@ static int sx9310_probe(struct i2c_client *client)
 	i2c_set_clientdata(client, indio_dev);
 
 	ret = sx9310_init_device(indio_dev);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	if (client->irq) {
@@ -930,7 +930,7 @@ static int sx9310_probe(struct i2c_client *client)
 						sx9310_irq_thread_handler,
 						IRQF_TRIGGER_LOW | IRQF_ONESHOT,
 						"sx9310_event", indio_dev);
-		if (ret < 0)
+		if (ret)
 			return ret;
 
 		data->trig =
@@ -952,7 +952,7 @@ static int sx9310_probe(struct i2c_client *client)
 					      iio_pollfunc_store_time,
 					      sx9310_trigger_handler,
 					      &sx9310_buffer_setup_ops);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	return devm_iio_device_register(&client->dev, indio_dev);
-- 
2.28.0.163.g6104cc2f0b6-goog

Re: [PATCH v2 10/14] iio: sx9310: Simplify error return handling

[Stephen Boyd]

Quoting Daniel Campello (2020-07-28 16:05:16)
> Checks for non-zero return values to signal error conditions.
> 
> Signed-off-by: Daniel Campello <campello@chromium.org>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

The mutex_lock, unlock, wait, lock, check wait, unlock sequence can be
improved in another patch.

[PATCH v2 11/14] iio: sx9310: Use variable to hold &client->dev

[Daniel Campello]

Improves readability by storing &client->dev in a local variable.

Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---

Changes in v2:
 - Added '\n' to dev_err()

 drivers/iio/proximity/sx9310.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index f43ca6a0acf2fc..517ff76acd00a0 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -885,11 +885,12 @@ static int sx9310_set_indio_dev_name(struct device *dev,
 static int sx9310_probe(struct i2c_client *client)
 {
 	int ret;
+	struct device *dev = &client->dev;
 	struct iio_dev *indio_dev;
 	struct sx9310_data *data;
 
-	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
-	if (indio_dev == NULL)
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
 		return -ENOMEM;
 
 	data = iio_priv(indio_dev);
@@ -903,17 +904,16 @@ static int sx9310_probe(struct i2c_client *client)
 
 	ret = regmap_read(data->regmap, SX9310_REG_WHOAMI, &data->whoami);
 	if (ret) {
-		dev_err(&client->dev, "error in reading WHOAMI register: %d",
-			ret);
+		dev_err(dev, "error in reading WHOAMI register: %d\n", ret);
 		return ret;
 	}
 
-	ret = sx9310_set_indio_dev_name(&client->dev, indio_dev, data->whoami);
+	ret = sx9310_set_indio_dev_name(dev, indio_dev, data->whoami);
 	if (ret)
 		return ret;
 
-	ACPI_COMPANION_SET(&indio_dev->dev, ACPI_COMPANION(&client->dev));
-	indio_dev->dev.parent = &client->dev;
+	ACPI_COMPANION_SET(&indio_dev->dev, ACPI_COMPANION(dev));
+	indio_dev->dev.parent = dev;
 	indio_dev->channels = sx9310_channels;
 	indio_dev->num_channels = ARRAY_SIZE(sx9310_channels);
 	indio_dev->info = &sx9310_info;
@@ -925,7 +925,7 @@ static int sx9310_probe(struct i2c_client *client)
 		return ret;
 
 	if (client->irq) {
-		ret = devm_request_threaded_irq(&client->dev, client->irq,
+		ret = devm_request_threaded_irq(dev, client->irq,
 						sx9310_irq_handler,
 						sx9310_irq_thread_handler,
 						IRQF_TRIGGER_LOW | IRQF_ONESHOT,
@@ -933,29 +933,29 @@ static int sx9310_probe(struct i2c_client *client)
 		if (ret)
 			return ret;
 
-		data->trig =
-			devm_iio_trigger_alloc(&client->dev, "%s-dev%d",
-					       indio_dev->name, indio_dev->id);
+		data->trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
+						    indio_dev->name,
+						    indio_dev->id);
 		if (!data->trig)
 			return -ENOMEM;
 
-		data->trig->dev.parent = &client->dev;
+		data->trig->dev.parent = dev;
 		data->trig->ops = &sx9310_trigger_ops;
 		iio_trigger_set_drvdata(data->trig, indio_dev);
 
-		ret = devm_iio_trigger_register(&client->dev, data->trig);
+		ret = devm_iio_trigger_register(dev, data->trig);
 		if (ret)
 			return ret;
 	}
 
-	ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev,
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
 					      iio_pollfunc_store_time,
 					      sx9310_trigger_handler,
 					      &sx9310_buffer_setup_ops);
 	if (ret)
 		return ret;
 
-	return devm_iio_device_register(&client->dev, indio_dev);
+	return devm_iio_device_register(dev, indio_dev);
 }
 
 static int __maybe_unused sx9310_suspend(struct device *dev)
-- 
2.28.0.163.g6104cc2f0b6-goog

[PATCH v2 12/14] iio: sx9310: Miscellaneous format fixes

[Daniel Campello]

Miscellaneous format fixes throughout the whole file.

Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---

Changes in v2: None

 drivers/iio/proximity/sx9310.c | 28 ++++++++++------------------
 1 file changed, 10 insertions(+), 18 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 517ff76acd00a0..b15ace422862ff 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -91,28 +91,21 @@
 #define   SX9310_REG_SAR_CTRL2_SAROFFSET_DEFAULT	0x3c
 
 #define SX9310_REG_SENSOR_SEL				0x30
-
 #define SX9310_REG_USE_MSB				0x31
 #define SX9310_REG_USE_LSB				0x32
-
 #define SX9310_REG_AVG_MSB				0x33
 #define SX9310_REG_AVG_LSB				0x34
-
 #define SX9310_REG_DIFF_MSB				0x35
 #define SX9310_REG_DIFF_LSB				0x36
-
 #define SX9310_REG_OFFSET_MSB				0x37
 #define SX9310_REG_OFFSET_LSB				0x38
-
 #define SX9310_REG_SAR_MSB				0x39
 #define SX9310_REG_SAR_LSB				0x3a
-
 #define SX9310_REG_I2C_ADDR				0x40
 #define SX9310_REG_PAUSE				0x41
 #define SX9310_REG_WHOAMI				0x42
 #define   SX9310_WHOAMI_VALUE				0x01
 #define   SX9311_WHOAMI_VALUE				0x02
-
 #define SX9310_REG_RESET				0x7f
 #define   SX9310_SOFT_RESET				0xde
 
@@ -403,7 +396,7 @@ static int sx9310_read_proximity(struct sx9310_data *data,
 		goto out_disable_irq;
 
 	*val = sign_extend32(be16_to_cpu(rawval),
-			     (chan->address == SX9310_REG_DIFF_MSB ? 11 : 15));
+			     chan->address == SX9310_REG_DIFF_MSB ? 11 : 15);
 
 	if (data->client->irq) {
 		ret = sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
@@ -433,8 +426,9 @@ static int sx9310_read_proximity(struct sx9310_data *data,
 static int sx9310_read_samp_freq(struct sx9310_data *data, int *val, int *val2)
 {
 	unsigned int regval;
-	int ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &regval);
+	int ret;
 
+	ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &regval);
 	if (ret)
 		return ret;
 
@@ -519,10 +513,9 @@ static irqreturn_t sx9310_irq_handler(int irq, void *private)
 		iio_trigger_poll(data->trig);
 
 	/*
-	 * Even if no event is enabled, we need to wake the thread to
-	 * clear the interrupt state by reading SX9310_REG_IRQ_SRC.  It
-	 * is not possible to do that here because regmap_read takes a
-	 * mutex.
+	 * Even if no event is enabled, we need to wake the thread to clear the
+	 * interrupt state by reading SX9310_REG_IRQ_SRC.
+	 * It is not possible to do that here because regmap_read takes a mutex.
 	 */
 	return IRQ_WAKE_THREAD;
 }
@@ -639,7 +632,7 @@ static int sx9310_write_event_config(struct iio_dev *indio_dev,
 
 static struct attribute *sx9310_attributes[] = {
 	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
-	NULL,
+	NULL
 };
 
 static const struct attribute_group sx9310_attribute_group = {
@@ -970,7 +963,6 @@ static int __maybe_unused sx9310_suspend(struct device *dev)
 	mutex_lock(&data->mutex);
 	ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0,
 			  &data->suspend_ctrl0);
-
 	if (ret)
 		goto out;
 
@@ -1016,21 +1008,21 @@ static const struct dev_pm_ops sx9310_pm_ops = {
 static const struct acpi_device_id sx9310_acpi_match[] = {
 	{ "STH9310", SX9310_WHOAMI_VALUE },
 	{ "STH9311", SX9311_WHOAMI_VALUE },
-	{},
+	{}
 };
 MODULE_DEVICE_TABLE(acpi, sx9310_acpi_match);
 
 static const struct of_device_id sx9310_of_match[] = {
 	{ .compatible = "semtech,sx9310", (void *)SX9310_WHOAMI_VALUE },
 	{ .compatible = "semtech,sx9311", (void *)SX9311_WHOAMI_VALUE },
-	{},
+	{}
 };
 MODULE_DEVICE_TABLE(of, sx9310_of_match);
 
 static const struct i2c_device_id sx9310_id[] = {
 	{ "sx9310", SX9310_WHOAMI_VALUE },
 	{ "sx9311", SX9311_WHOAMI_VALUE },
-	{},
+	{}
 };
 MODULE_DEVICE_TABLE(i2c, sx9310_id);
 
-- 
2.28.0.163.g6104cc2f0b6-goog

[PATCH v2 13/14] iio: sx9310: Drop channel_users[]

[Daniel Campello]

From: Stephen Boyd <swboyd@chromium.org>

This struct member isn't used. Drop it.

Fixes: 72ad02b15d63 ("iio: Add SEMTECH SX9310/9311 sensor driver")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Daniel Campello <campello@chromium.org>
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---

Changes in v2: None

 drivers/iio/proximity/sx9310.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index b15ace422862ff..6607732edd034a 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -132,7 +132,6 @@ struct sx9310_data {
 	struct completion completion;
 	unsigned long chan_read;
 	unsigned long chan_event;
-	int channel_users[SX9310_NUM_CHANNELS];
 	unsigned int whoami;
 };
 
-- 
2.28.0.163.g6104cc2f0b6-goog

[PATCH v2 14/14] iio: sx9310: Enable vdd and svdd regulators at probe

[Daniel Campello]

From: Stephen Boyd <swboyd@chromium.org>

Enable the main power supply (vdd) and digital IO power supply (svdd)
during probe so that the i2c communication and device works properly on
boards that aggressively power gate these supplies.

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---

Changes in v2: None

 drivers/iio/proximity/sx9310.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 6607732edd034a..163b18f91955bd 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -19,6 +19,7 @@
 #include <linux/module.h>
 #include <linux/pm.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 
 #include <linux/iio/buffer.h>
@@ -119,6 +120,7 @@ struct sx9310_data {
 	struct i2c_client *client;
 	struct iio_trigger *trig;
 	struct regmap *regmap;
+	struct regulator_bulk_data supplies[2];
 	/*
 	 * Last reading of the proximity status for each channel.
 	 * We only send an event to user space when this changes.
@@ -874,6 +876,13 @@ static int sx9310_set_indio_dev_name(struct device *dev,
 	return 0;
 }
 
+static void sx9310_regulator_disable(void *_data)
+{
+	struct sx9310_data *data = _data;
+
+	regulator_bulk_disable(ARRAY_SIZE(data->supplies), data->supplies);
+}
+
 static int sx9310_probe(struct i2c_client *client)
 {
 	int ret;
@@ -887,6 +896,8 @@ static int sx9310_probe(struct i2c_client *client)
 
 	data = iio_priv(indio_dev);
 	data->client = client;
+	data->supplies[0].supply = "vdd";
+	data->supplies[1].supply = "svdd";
 	mutex_init(&data->mutex);
 	init_completion(&data->completion);
 
@@ -894,6 +905,21 @@ static int sx9310_probe(struct i2c_client *client)
 	if (IS_ERR(data->regmap))
 		return PTR_ERR(data->regmap);
 
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->supplies),
+				      data->supplies);
+	if (ret)
+		return ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(data->supplies), data->supplies);
+	if (ret)
+		return ret;
+	/* Must wait for Tpor time after initial power up */
+	usleep_range(1000, 1100);
+
+	ret = devm_add_action_or_reset(dev, sx9310_regulator_disable, data);
+	if (ret)
+		return ret;
+
 	ret = regmap_read(data->regmap, SX9310_REG_WHOAMI, &data->whoami);
 	if (ret) {
 		dev_err(dev, "error in reading WHOAMI register: %d\n", ret);
-- 
2.28.0.163.g6104cc2f0b6-goog

Re: [PATCH v2 00/14] sx9310 iio driver updates

[Stephen Boyd]

Quoting Daniel Campello (2020-07-28 16:05:06)
> The first patch resends the DT binding for the driver that was merged in
> v5.8-rc1 with a small change to update for proper regulators. The second
> through the eleventh patch fixes several issues dropped from v8 to v9
> when the initial patch was merged. The twelveth patch fixes a few
> printks that are missing newlines and should be totally non-trivial to
> apply. The thirteenth patch drops channel_users because it's unused. The
> final patch adds support to enable the svdd and vdd supplies so that
> this driver can work on a board where the svdd supply isn't enabled at
> boot and needs to be turned on before this driver starts to communicate
> with the chip.

Can you please send this as not an in-reply-to the previous series? My
inbox has a hard time realizing that this is a new patch series.

Re: [PATCH v2 00/14] sx9310 iio driver updates

[Stephen Boyd]

Quoting Daniel Campello (2020-07-28 16:05:06)
> The first patch resends the DT binding for the driver that was merged in
> v5.8-rc1 with a small change to update for proper regulators. The second
> through the eleventh patch fixes several issues dropped from v8 to v9
> when the initial patch was merged. The twelveth patch fixes a few
> printks that are missing newlines and should be totally non-trivial to
> apply. The thirteenth patch drops channel_users because it's unused. The
> final patch adds support to enable the svdd and vdd supplies so that
> this driver can work on a board where the svdd supply isn't enabled at
> boot and needs to be turned on before this driver starts to communicate
> with the chip.
> 

Can you add this patch onto the end?

----8<----
From: Stephen Boyd <swboyd@chromium.org>
Subject: [PATCH] iio: sx9310: Use irq trigger flags from firmware

We shouldn't need to set default irq trigger flags here as the firmware
should have properly indicated the trigger type, i.e. level low, in the
DT or ACPI tables.

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---
 drivers/iio/proximity/sx9310.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 24a2360b6314..2106b9141928 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -945,7 +945,7 @@ static int sx9310_probe(struct i2c_client *client)
 		ret = devm_request_threaded_irq(dev, client->irq,
 						sx9310_irq_handler,
 						sx9310_irq_thread_handler,
-						IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+						IRQF_ONESHOT,
 						"sx9310_event", indio_dev);
 		if (ret)
 			return ret;
-- 
Sent by a computer, using git, on the internet