Re: [PATCH v2 24/29] dt-bindings:iio:temperature:melexis,mlx90614 yaml conversion

[Crt Mori <cmo@melexis.com>]

Hi Jonathan,
The commit message should change here as now you did not list all 3
authors as maintainers, because one has a bouncy email address.

Best regards,
Crt

On Sat, 31 Oct 2020 at 14:44, Jonathan Cameron <jic23@kernel.org> wrote:
>
> From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>
> Simple conversion from txt to yaml.
> I've listed all 3 authors of the driver as maintainers.
>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Acked-by: Crt Mori <cmo@melexis.com>
> Cc: Peter Meerwald <pmeerw@pmeerw.net>
> ---
>  .../iio/temperature/melexis,mlx90614.yaml     | 50 +++++++++++++++++++
>  .../bindings/iio/temperature/mlx90614.txt     | 24 ---------
>  2 files changed, 50 insertions(+), 24 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml
> new file mode 100644
> index 000000000000..d6965a0c1cf3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml
> @@ -0,0 +1,50 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/temperature/melexis,mlx90614.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Melexis MLX90614 contactless IR temperature sensor
> +
> +maintainers:
> +  - Peter Meerwald <pmeerw@pmeerw.net>
> +  - Crt Mori <cmo@melexis.com>
> +
> +description: |
> +  http://melexis.com/Infrared-Thermometer-Sensors/Infrared-Thermometer-Sensors/MLX90614-615.aspx
> +
> +properties:
> +  compatible:
> +    const: melexis,mlx90614
> +
> +  reg:
> +    maxItems: 1
> +
> +  wakeup-gpios:
> +    description:
> +      GPIO connected to the SDA line to hold low in order to wake up the
> +      device.  In normal operation, the GPIO is set as input and will
> +      not interfere in I2C communication.  There is no need for a GPIO
> +      driving the SCL line.  If no GPIO is given, power management is disabled.
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        temp-sensor@5a {
> +            compatible = "melexis,mlx90614";
> +            reg = <0x5a>;
> +            wakeup-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
> +        };
> +    };
> +...
> diff --git a/Documentation/devicetree/bindings/iio/temperature/mlx90614.txt b/Documentation/devicetree/bindings/iio/temperature/mlx90614.txt
> deleted file mode 100644
> index 9be57b036092..000000000000
> --- a/Documentation/devicetree/bindings/iio/temperature/mlx90614.txt
> +++ /dev/null
> @@ -1,24 +0,0 @@
> -* Melexis MLX90614 contactless IR temperature sensor
> -
> -http://melexis.com/Infrared-Thermometer-Sensors/Infrared-Thermometer-Sensors/MLX90614-615.aspx
> -
> -Required properties:
> -
> -  - compatible: should be "melexis,mlx90614"
> -  - reg: the I2C address of the sensor
> -
> -Optional properties:
> -
> -  - wakeup-gpios: device tree identifier of the GPIO connected to the SDA line
> -      to hold low in order to wake up the device.  In normal operation, the
> -      GPIO is set as input and will not interfere in I2C communication.  There
> -      is no need for a GPIO driving the SCL line.  If no GPIO is given, power
> -      management is disabled.
> -
> -Example:
> -
> -mlx90614@5a {
> -       compatible = "melexis,mlx90614";
> -       reg = <0x5a>;
> -       wakeup-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
> -};
> --
> 2.28.0
>