* [PATCH 1/4] dt-bindings: dma: Add bindings for ox810se dma engine [not found] <20220104145206.135524-1-narmstrong@baylibre.com> @ 2022-01-04 14:52 ` Neil Armstrong 2022-01-12 1:20 ` Rob Herring 0 siblings, 1 reply; 2+ messages in thread From: Neil Armstrong @ 2022-01-04 14:52 UTC (permalink / raw) To: vkoul, devicetree Cc: linux-oxnas, dmaengine, linux-arm-kernel, linux-kernel, Neil Armstrong This adds the YAML dt-bindings for the DMA engine found in the Oxford Semiconductor OX810SE SoC. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- .../bindings/dma/oxsemi,ox810se-dma.yaml | 97 +++++++++++++++++++ 1 file changed, 97 insertions(+) create mode 100644 Documentation/devicetree/bindings/dma/oxsemi,ox810se-dma.yaml diff --git a/Documentation/devicetree/bindings/dma/oxsemi,ox810se-dma.yaml b/Documentation/devicetree/bindings/dma/oxsemi,ox810se-dma.yaml new file mode 100644 index 000000000000..6efa28e8b124 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/oxsemi,ox810se-dma.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/oxsemi,ox810se-dma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Oxford Semiconductor DMA Controller Device Tree Bindings + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + +allOf: + - $ref: "dma-controller.yaml#" + +properties: + "#dma-cells": + const: 1 + + compatible: + const: oxsemi,ox810se-dma + + reg: + maxItems: 2 + + reg-names: + items: + - const: dma + - const: sgdma + + interrupts: + maxItems: 5 + + clocks: + maxItems: 1 + + resets: + maxItems: 2 + + reset-names: + items: + - const: dma + - const: sgdma + + dma-channels: true + + oxsemi,targets-types: + description: + Table with allowed memory ranges and memory type associated. + $ref: "/schemas/types.yaml#/definitions/uint32-matrix" + minItems: 4 + items: + items: + - description: + The first cell defines the memory range start address + - description: + The first cell defines the memory range end address + - description: + The third cell represents memory type, 0 for SATA, + 1 for DPE RX, 2 for DPE TX, 5 for AUDIO TX, 6 for AUDIO RX, + 15 for DRAM MEMORY. + enum: [ 0, 1, 2, 5, 6, 15 ] + +required: + - "#dma-cells" + - dma-channels + - compatible + - reg + - interrupts + - clocks + - resets + - reset-names + - oxsemi,targets-types + +additionalProperties: false + +examples: + - | + dma: dma-controller@600000 { + compatible = "oxsemi,ox810se-dma"; + reg = <0x600000 0x100000>, <0xc00000 0x100000>; + reg-names = "dma", "sgdma"; + interrupts = <13>, <14>, <15>, <16>, <20>; + clocks = <&stdclk 1>; + resets = <&reset 8>, <&reset 24>; + reset-names = "dma", "sgdma"; + + /* Encodes the authorized memory types */ + oxsemi,targets-types = + <0x45900000 0x45a00000 0>, /* SATA */ + <0x42000000 0x43000000 0>, /* SATA DATA */ + <0x48000000 0x58000000 15>, /* DDR */ + <0x58000000 0x58020000 15>; /* SRAM */ + + #dma-cells = <1>; + dma-channels = <5>; + }; +... -- 2.25.1 ^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH 1/4] dt-bindings: dma: Add bindings for ox810se dma engine 2022-01-04 14:52 ` [PATCH 1/4] dt-bindings: dma: Add bindings for ox810se dma engine Neil Armstrong @ 2022-01-12 1:20 ` Rob Herring 0 siblings, 0 replies; 2+ messages in thread From: Rob Herring @ 2022-01-12 1:20 UTC (permalink / raw) To: Neil Armstrong Cc: vkoul, devicetree, linux-oxnas, dmaengine, linux-arm-kernel, linux-kernel On Tue, Jan 04, 2022 at 03:52:03PM +0100, Neil Armstrong wrote: > This adds the YAML dt-bindings for the DMA engine found in the > Oxford Semiconductor OX810SE SoC. > > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> > --- > .../bindings/dma/oxsemi,ox810se-dma.yaml | 97 +++++++++++++++++++ > 1 file changed, 97 insertions(+) > create mode 100644 Documentation/devicetree/bindings/dma/oxsemi,ox810se-dma.yaml > > diff --git a/Documentation/devicetree/bindings/dma/oxsemi,ox810se-dma.yaml b/Documentation/devicetree/bindings/dma/oxsemi,ox810se-dma.yaml > new file mode 100644 > index 000000000000..6efa28e8b124 > --- /dev/null > +++ b/Documentation/devicetree/bindings/dma/oxsemi,ox810se-dma.yaml > @@ -0,0 +1,97 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/dma/oxsemi,ox810se-dma.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Oxford Semiconductor DMA Controller Device Tree Bindings > + > +maintainers: > + - Neil Armstrong <narmstrong@baylibre.com> > + > +allOf: > + - $ref: "dma-controller.yaml#" > + > +properties: > + "#dma-cells": > + const: 1 > + > + compatible: > + const: oxsemi,ox810se-dma > + > + reg: > + maxItems: 2 > + > + reg-names: > + items: > + - const: dma > + - const: sgdma > + > + interrupts: > + maxItems: 5 Need to define what each one is. > + > + clocks: > + maxItems: 1 > + > + resets: > + maxItems: 2 > + > + reset-names: > + items: > + - const: dma > + - const: sgdma > + > + dma-channels: true Constraints on number of channels? > + > + oxsemi,targets-types: > + description: > + Table with allowed memory ranges and memory type associated. > + $ref: "/schemas/types.yaml#/definitions/uint32-matrix" > + minItems: 4 > + items: > + items: > + - description: > + The first cell defines the memory range start address > + - description: > + The first cell defines the memory range end address > + - description: > + The third cell represents memory type, 0 for SATA, > + 1 for DPE RX, 2 for DPE TX, 5 for AUDIO TX, 6 for AUDIO RX, > + 15 for DRAM MEMORY. > + enum: [ 0, 1, 2, 5, 6, 15 ] > + > +required: > + - "#dma-cells" > + - dma-channels > + - compatible > + - reg > + - interrupts > + - clocks > + - resets > + - reset-names > + - oxsemi,targets-types > + > +additionalProperties: false > + > +examples: > + - | > + dma: dma-controller@600000 { Drop unused labels. > + compatible = "oxsemi,ox810se-dma"; > + reg = <0x600000 0x100000>, <0xc00000 0x100000>; > + reg-names = "dma", "sgdma"; > + interrupts = <13>, <14>, <15>, <16>, <20>; > + clocks = <&stdclk 1>; > + resets = <&reset 8>, <&reset 24>; > + reset-names = "dma", "sgdma"; > + > + /* Encodes the authorized memory types */ > + oxsemi,targets-types = > + <0x45900000 0x45a00000 0>, /* SATA */ > + <0x42000000 0x43000000 0>, /* SATA DATA */ > + <0x48000000 0x58000000 15>, /* DDR */ > + <0x58000000 0x58020000 15>; /* SRAM */ > + > + #dma-cells = <1>; > + dma-channels = <5>; > + }; > +... > -- > 2.25.1 > > ^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-01-12 1:20 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20220104145206.135524-1-narmstrong@baylibre.com>
2022-01-04 14:52 ` [PATCH 1/4] dt-bindings: dma: Add bindings for ox810se dma engine Neil Armstrong
2022-01-12 1:20 ` Rob Herring
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).