From: Mark Kettenis <mark.kettenis@xs4all.nl>
To: Hector Martin <marcan@marcan.st>
Cc: linux-arm-kernel@lists.infradead.org, marcan@marcan.st,
maz@kernel.org, robh+dt@kernel.org, arnd@kernel.org,
linus.walleij@linaro.org, alyssa@rosenzweig.io, krzk@kernel.org,
gregkh@linuxfoundation.org, p.zabel@pengutronix.de,
rafael@kernel.org, devicetree@vger.kernel.org,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-samsung-soc@vger.kernel.org, linux-serial@vger.kernel.org
Subject: Re: [PATCH 2/7] dt-bindings: power: Add apple,pmgr-pwrstate binding
Date: Tue, 5 Oct 2021 22:16:28 +0200 (CEST) [thread overview]
Message-ID: <d3ca3bcc44156f32@bloch.sibelius.xs4all.nl> (raw)
In-Reply-To: <20211005155923.173399-3-marcan@marcan.st> (message from Hector Martin on Wed, 6 Oct 2021 00:59:18 +0900)
> From: Hector Martin <marcan@marcan.st>
> Date: Wed, 6 Oct 2021 00:59:18 +0900
>
> This syscon child node represents a single SoC device controlled by the
> PMGR block. This layout allows us to declare all device power state
> controls (power/clock gating and reset) in the device tree, including
> dependencies, instead of hardcoding it into the driver. The register
> layout is uniform.
>
> Each pmgr-pwrstate node provides genpd and reset features, to be
> consumed by downstream device nodes.
>
> Future SoCs are expected to use backwards compatible registers, and the
> "apple,pmgr-pwrstate" represents any such interfaces (possibly with
> additional features gated by the more specific compatible), allowing
> them to be bound without driver updates. If a backwards incompatible
> change is introduced in future SoCs, it will require a new compatible,
> such as "apple,pmgr-pwrstate-v2".
Or we drop the apple,mpgr-pwrstate and go with only SoC-specific
compatibles from that point onwards.
>
> Signed-off-by: Hector Martin <marcan@marcan.st>
> ---
> .../bindings/power/apple,pmgr-pwrstate.yaml | 117 ++++++++++++++++++
> MAINTAINERS | 1 +
> 2 files changed, 118 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml
This works for U-Boot. Didn't write an OpenBSD driver yet but it
should work there as well.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
> diff --git a/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml b/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml
> new file mode 100644
> index 000000000000..a14bf5f30ff0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml
> @@ -0,0 +1,117 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/apple,pmgr-pwrstate.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Apple SoC PMGR Power States
> +
> +maintainers:
> + - Hector Martin <marcan@marcan.st>
> +
> +allOf:
> + - $ref: "power-domain.yaml#"
> +
> +description: |
> + Apple SoCs include a PMGR block responsible for power management,
> + which can control various clocks, resets, power states, and
> + performance features. This binding describes the device power
> + state registers, which control power states and resets.
> +
> + Each instance of a power controller within the PMGR syscon node
> + represents a generic power domain provider, as documented in
> + Documentation/devicetree/bindings/power/power-domain.yaml.
> + The provider controls a single SoC block. The power hierarchy is
> + represented via power-domains relationships between these nodes.
> +
> + See Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml
> + for the top-level PMGR node documentation.
> +
> + IP cores belonging to a power domain should contain a
> + "power-domains" property that is a phandle for the
> + power domain node representing the domain.
> +
> +properties:
> + $nodename:
> + pattern: "^power-controller@[0-9a-f]+$"
> +
> + compatible:
> + items:
> + - enum:
> + - apple,t8103-pmgr-pwrstate
> + - const: apple,pmgr-pwrstate
> +
> + reg:
> + maxItems: 1
> +
> + "#power-domain-cells":
> + const: 0
> +
> + "#reset-cells":
> + const: 0
> +
> + power-domains:
> + description:
> + Reference to parent power domains. A domain may have multiple parents,
> + and all will be powered up when it is powered.
> +
> + apple,domain-name:
> + description: |
> + Specifies the name of the SoC device being controlled. This is used to
> + name the power/reset domains.
> + $ref: /schemas/types.yaml#/definitions/string
> +
> + apple,always-on:
> + description: |
> + Forces this power domain to always be powered up.
> + type: boolean
> +
> +required:
> + - compatible
> + - reg
> + - "#power-domain-cells"
> + - "#reset-cells"
> + - "apple,domain-name"
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + power-management@23b700000 {
> + compatible = "apple,t8103-pmgr", "apple,pmgr", "syscon", "simple-mfd";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x2 0x3b700000 0x0 0x14000>;
> +
> + ps_sio: power-controller@1c0 {
> + compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
> + reg = <0x1c0>;
> + #power-domain-cells = <0>;
> + #reset-cells = <0>;
> + apple,domain-name = "sio";
> + apple,always-on;
> + };
> +
> + ps_uart_p: power-controller@220 {
> + compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
> + reg = <0x220>;
> + #power-domain-cells = <0>;
> + #reset-cells = <0>;
> + apple,domain-name = "uart_p";
> + power-domains = <&ps_sio>;
> + };
> +
> + ps_uart0: power-controller@270 {
> + compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
> + reg = <0x270>;
> + #power-domain-cells = <0>;
> + #reset-cells = <0>;
> + apple,domain-name = "uart0";
> + power-domains = <&ps_uart_p>;
> + };
> + };
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index d25598842d15..5fe53d9a2956 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1722,6 +1722,7 @@ F: Documentation/devicetree/bindings/arm/apple.yaml
> F: Documentation/devicetree/bindings/arm/apple/*
> F: Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml
> F: Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
> +F: Documentation/devicetree/bindings/power/apple*
> F: arch/arm64/boot/dts/apple/
> F: drivers/irqchip/irq-apple-aic.c
> F: include/dt-bindings/interrupt-controller/apple-aic.h
> --
> 2.33.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
next prev parent reply other threads:[~2021-10-05 20:16 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-05 15:59 [PATCH 0/7] Apple SoC PMGR device power states driver Hector Martin
2021-10-05 15:59 ` [PATCH 1/7] dt-bindings: arm: apple: Add apple,pmgr binding Hector Martin
2021-10-05 20:09 ` Mark Kettenis
2021-10-05 22:45 ` Rob Herring
2021-10-06 15:17 ` Hector Martin
2021-10-06 6:56 ` Krzysztof Kozlowski
2021-10-06 7:30 ` Krzysztof Kozlowski
2021-10-06 15:21 ` Hector Martin
2021-10-06 15:26 ` Hector Martin
2021-10-07 13:10 ` Krzysztof Kozlowski
2021-10-05 15:59 ` [PATCH 2/7] dt-bindings: power: Add apple,pmgr-pwrstate binding Hector Martin
2021-10-05 20:16 ` Mark Kettenis [this message]
2021-10-06 15:27 ` Hector Martin
2021-10-06 0:58 ` Rob Herring
2021-10-06 15:52 ` Hector Martin
2021-10-06 15:55 ` Hector Martin
2021-10-08 7:50 ` Krzysztof Kozlowski
2021-10-11 5:17 ` Hector Martin
2021-10-06 7:05 ` Krzysztof Kozlowski
2021-10-06 15:59 ` Hector Martin
2021-10-07 13:12 ` Krzysztof Kozlowski
2021-10-11 4:42 ` Hector Martin
2021-10-05 15:59 ` [PATCH 3/7] soc: apple: Add driver for Apple PMGR power state controls Hector Martin
2021-10-05 16:08 ` Linus Walleij
2021-10-05 16:15 ` Hector Martin
2021-10-05 19:49 ` Linus Walleij
2021-10-05 20:21 ` Mark Kettenis
2021-10-06 16:00 ` Hector Martin
2021-10-06 7:28 ` Krzysztof Kozlowski
2021-10-06 16:08 ` Hector Martin
2021-10-06 9:24 ` Philipp Zabel
2021-10-06 16:11 ` Hector Martin
2021-10-05 15:59 ` [PATCH 4/7] arm64: dts: apple: t8103: Rename clk24 to clkref Hector Martin
2021-10-05 20:22 ` Mark Kettenis
2021-10-05 15:59 ` [PATCH 5/7] arm64: dts: apple: t8103: Add the UART PMGR tree Hector Martin
2021-10-05 20:25 ` Mark Kettenis
2021-10-05 15:59 ` [PATCH 6/7] tty: serial: samsung_tty: Support runtime PM Hector Martin
2021-10-06 7:43 ` Krzysztof Kozlowski
2021-10-06 13:25 ` Rafael J. Wysocki
2021-10-06 13:29 ` Krzysztof Kozlowski
2021-10-11 5:32 ` Hector Martin
2021-10-11 6:48 ` Krzysztof Kozlowski
2021-10-11 8:27 ` Johan Hovold
2021-10-05 15:59 ` [PATCH 7/7] arm64: dts: apple: t8103: Add UART2 Hector Martin
2021-10-05 20:26 ` Mark Kettenis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d3ca3bcc44156f32@bloch.sibelius.xs4all.nl \
--to=mark.kettenis@xs4all.nl \
--cc=alyssa@rosenzweig.io \
--cc=arnd@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=krzk@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=marcan@marcan.st \
--cc=maz@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=rafael@kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).