* [PATCH 0/3] Fix broken bananapi m2 devicetree/regulators @ 2018-02-09 17:52 Philipp Rossak [not found] ` <20180209175236.21215-1-embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2018-02-10 13:56 ` [PATCH 0/3] Fix broken bananapi m2 devicetree/regulators Sergey Suloev 0 siblings, 2 replies; 14+ messages in thread From: Philipp Rossak @ 2018-02-09 17:52 UTC (permalink / raw) To: robh+dt, mark.rutland, linux, maxime.ripard, wens Cc: devicetree, linux-arm-kernel, linux-kernel, linux-sunxi This patchseries fixes the bananapi m1 devicetree, to be able to boot again. The first two patches update/improve the devicetree and the last patch adds all missing regulators. Regards, Philipp Philipp Rossak (3): arm: dts: sun6i: a31s: bpi-m2: update mmc supply nodes arm: dts: sun6i: a31s: bpi-m2: improve pmic properties arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 70 +++++++++++++++++++++++- 1 file changed, 67 insertions(+), 3 deletions(-) -- 2.11.0 ^ permalink raw reply [flat|nested] 14+ messages in thread
[parent not found: <20180209175236.21215-1-embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]
* [PATCH 1/3] arm: dts: sun6i: a31s: bpi-m2: update mmc supply nodes [not found] ` <20180209175236.21215-1-embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> @ 2018-02-09 17:52 ` Philipp Rossak [not found] ` <20180209175236.21215-2-embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2018-02-09 17:52 ` [PATCH 2/3] arm: dts: sun6i: a31s: bpi-m2: improve pmic properties Philipp Rossak 2018-02-09 17:52 ` [PATCH 3/3] arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators Philipp Rossak 2 siblings, 1 reply; 14+ messages in thread From: Philipp Rossak @ 2018-02-09 17:52 UTC (permalink / raw) To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw, maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw This patch updates the vmmc-supply properties on the mmc0 and mmc2 node to use the allready existent regulators. We can now remove the sunxi-common-regulators.dtsi include since we don't need it anymore. Signed-off-by: Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> --- arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index 51e6f1d21c32..a8d86211c8f3 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -42,7 +42,6 @@ /dts-v1/; #include "sun6i-a31s.dtsi" -#include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> / { @@ -118,7 +117,7 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */ cd-inverted; @@ -132,7 +131,7 @@ &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins_a>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; mmc-pwrseq = <&mmc2_pwrseq>; bus-width = <4>; non-removable; -- 2.11.0 ^ permalink raw reply related [flat|nested] 14+ messages in thread
[parent not found: <20180209175236.21215-2-embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]
* Re: [PATCH 1/3] arm: dts: sun6i: a31s: bpi-m2: update mmc supply nodes [not found] ` <20180209175236.21215-2-embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> @ 2018-02-11 22:15 ` Philipp Rossak 0 siblings, 0 replies; 14+ messages in thread From: Philipp Rossak @ 2018-02-11 22:15 UTC (permalink / raw) To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw, maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw Am Freitag, den 09.02.2018, 18:52 +0100 schrieb Philipp Rossak: > This patch updates the vmmc-supply properties on the mmc0 and mmc2 > node to use the allready existent regulators. > We can now remove the sunxi-common-regulators.dtsi include since we > don't need it anymore. > > Signed-off-by: Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > --- > arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 5 ++--- > 1 file changed, 2 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts > b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts > index 51e6f1d21c32..a8d86211c8f3 100644 > --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts > +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts > @@ -42,7 +42,6 @@ > > /dts-v1/; > #include "sun6i-a31s.dtsi" > -#include "sunxi-common-regulators.dtsi" > #include <dt-bindings/gpio/gpio.h> > > / { > @@ -118,7 +117,7 @@ > &mmc0 { > pinctrl-names = "default"; > pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>; > - vmmc-supply = <®_vcc3v0>; > + vmmc-supply = <®_dcdc1>; > bus-width = <4>; > cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */ > cd-inverted; > @@ -132,7 +131,7 @@ > &mmc2 { > pinctrl-names = "default"; > pinctrl-0 = <&mmc2_pins_a>; > - vmmc-supply = <®_vcc3v0>; > + vmmc-supply = <®_dcdc1>; ^^ this here is wrong! this should be ®_aldo1 > mmc-pwrseq = <&mmc2_pwrseq>; > bus-width = <4>; > non-removable; Philipp -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org For more options, visit https://groups.google.com/d/optout. ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 2/3] arm: dts: sun6i: a31s: bpi-m2: improve pmic properties [not found] ` <20180209175236.21215-1-embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2018-02-09 17:52 ` [PATCH 1/3] arm: dts: sun6i: a31s: bpi-m2: update mmc supply nodes Philipp Rossak @ 2018-02-09 17:52 ` Philipp Rossak 2018-02-09 17:52 ` [PATCH 3/3] arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators Philipp Rossak 2 siblings, 0 replies; 14+ messages in thread From: Philipp Rossak @ 2018-02-09 17:52 UTC (permalink / raw) To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw, maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw The eldoin is supplied from the dcdc1 regulator. The N_VBUSEN pin is connected to an external power regulator (SY6280AAC). With this commit we update the pmic binding properties to support those features. Signed-off-by: Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> --- arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index a8d86211c8f3..556528386858 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -162,6 +162,8 @@ reg = <0x68>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + x-powers,drive-vbus-en; }; }; -- 2.11.0 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 3/3] arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators [not found] ` <20180209175236.21215-1-embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2018-02-09 17:52 ` [PATCH 1/3] arm: dts: sun6i: a31s: bpi-m2: update mmc supply nodes Philipp Rossak 2018-02-09 17:52 ` [PATCH 2/3] arm: dts: sun6i: a31s: bpi-m2: improve pmic properties Philipp Rossak @ 2018-02-09 17:52 ` Philipp Rossak 2 siblings, 0 replies; 14+ messages in thread From: Philipp Rossak @ 2018-02-09 17:52 UTC (permalink / raw) To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw, maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw This patch fixes a bootproblem with the Bananapi M2 board. Since there are some regulators missing we add them right now. Those values come from the schematic, below you can find a small overview: * reg_aldo1: 3,3V, powers the wifi * reg_aldo2: 2,5V, powers the IO of the RTL8211E * reg_aldo3: 3,3V, powers the audio * reg_dldo1: 3,0V, powers the RTL8211E * reg_dldo2: 2,8V, powers the analog part of the csi * reg_dldo3: 3,3V, powers misc * reg_eldo1: 1,8V, powers the csi * reg_ldo_io1:1,8V, powers the gpio * reg_dc5ldo: needs to be always on Signed-off-by: Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> --- arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 56 ++++++++++++++++++++++++ 1 file changed, 56 insertions(+) diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index 51e6f1d21c32..01fcfe0649ad 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -99,6 +99,7 @@ pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>; phy = <&phy1>; phy-mode = "rgmii"; + phy-supply = <®_dldo1>; snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */ snps,reset-active-low; snps,reset-delays-us = <0 10000 30000>; @@ -193,7 +194,28 @@ #include "axp22x.dtsi" +®_aldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-gmac"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + ®_dc5ldo { + regulator-always-on; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1320000>; regulator-name = "vdd-cpus"; @@ -233,6 +255,40 @@ regulator-name = "vcc-dram"; }; +®_dldo1 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-mac"; +}; + +®_dldo2 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "avdd-csi"; +}; + +®_dldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pb"; +}; + +®_eldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vdd-csi"; + status = "okay"; +}; + +®_ldo_io1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pm-cpus"; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; -- 2.11.0 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH 0/3] Fix broken bananapi m2 devicetree/regulators 2018-02-09 17:52 [PATCH 0/3] Fix broken bananapi m2 devicetree/regulators Philipp Rossak [not found] ` <20180209175236.21215-1-embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> @ 2018-02-10 13:56 ` Sergey Suloev [not found] ` <160b60e2-6e50-0d63-e6ac-b67e10317e12-RHPENKW2UW+1Z/+hSey0Gg@public.gmane.org> 1 sibling, 1 reply; 14+ messages in thread From: Sergey Suloev @ 2018-02-10 13:56 UTC (permalink / raw) To: Philipp Rossak, robh+dt, mark.rutland, linux, maxime.ripard, wens Cc: devicetree, linux-sunxi, linux-kernel, linux-arm-kernel On 02/09/2018 08:52 PM, Philipp Rossak wrote: > This patchseries fixes the bananapi m1 devicetree, to be able to boot again. > The first two patches update/improve the devicetree and the last patch adds > all missing regulators. > > Regards, > Philipp > > Philipp Rossak (3): > arm: dts: sun6i: a31s: bpi-m2: update mmc supply nodes > arm: dts: sun6i: a31s: bpi-m2: improve pmic properties > arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators > > arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 70 +++++++++++++++++++++++- > 1 file changed, 67 insertions(+), 3 deletions(-) > patches are not working Thanks ^ permalink raw reply [flat|nested] 14+ messages in thread
[parent not found: <160b60e2-6e50-0d63-e6ac-b67e10317e12-RHPENKW2UW+1Z/+hSey0Gg@public.gmane.org>]
* Re: [PATCH 0/3] Fix broken bananapi m2 devicetree/regulators [not found] ` <160b60e2-6e50-0d63-e6ac-b67e10317e12-RHPENKW2UW+1Z/+hSey0Gg@public.gmane.org> @ 2018-02-10 21:01 ` Philipp Rossak 2018-02-10 21:08 ` Sergey Suloev 0 siblings, 1 reply; 14+ messages in thread From: Philipp Rossak @ 2018-02-10 21:01 UTC (permalink / raw) To: Sergey Suloev, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw, maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r Hey Sergey, Thanks for mentioning, but I think the problem has nothing to do with those patches. I tested them with the v4.15.0 Kernel since this is the last stable release and we are right now in the merging window. I tested the latest mainline, without those patches and the kernel is not booting (I can't see any uart output). Thanks, Philipp On 10.02.2018 14:56, Sergey Suloev wrote: > On 02/09/2018 08:52 PM, Philipp Rossak wrote: >> This patchseries fixes the bananapi m1 devicetree, to be able to boot >> again. >> The first two patches update/improve the devicetree and the last patch >> adds >> all missing regulators. >> >> Regards, >> Philipp >> >> Philipp Rossak (3): >> arm: dts: sun6i: a31s: bpi-m2: update mmc supply nodes >> arm: dts: sun6i: a31s: bpi-m2: improve pmic properties >> arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators >> >> arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 70 >> +++++++++++++++++++++++- >> 1 file changed, 67 insertions(+), 3 deletions(-) >> > patches are not working > > Thanks > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 0/3] Fix broken bananapi m2 devicetree/regulators 2018-02-10 21:01 ` Philipp Rossak @ 2018-02-10 21:08 ` Sergey Suloev [not found] ` <40887d4b-0fb0-239e-e5a9-1a87f82946c2-RHPENKW2UW+1Z/+hSey0Gg@public.gmane.org> 0 siblings, 1 reply; 14+ messages in thread From: Sergey Suloev @ 2018-02-10 21:08 UTC (permalink / raw) To: Philipp Rossak, robh+dt, mark.rutland, linux, maxime.ripard, wens Cc: devicetree, linux-sunxi, linux-kernel, linux-arm-kernel On 02/11/2018 12:01 AM, Philipp Rossak wrote: > Hey Sergey, > > Thanks for mentioning, but I think the problem has nothing to do with > those patches. I tested them with the v4.15.0 Kernel since this is the > last stable release and we are right now in the merging window. > > I tested the latest mainline, without those patches and the kernel is > not booting (I can't see any uart output). > > Thanks, > Philipp > > On 10.02.2018 14:56, Sergey Suloev wrote: >> On 02/09/2018 08:52 PM, Philipp Rossak wrote: >>> This patchseries fixes the bananapi m1 devicetree, to be able to >>> boot again. >>> The first two patches update/improve the devicetree and the last >>> patch adds >>> all missing regulators. >>> >>> Regards, >>> Philipp >>> >>> Philipp Rossak (3): >>> arm: dts: sun6i: a31s: bpi-m2: update mmc supply nodes >>> arm: dts: sun6i: a31s: bpi-m2: improve pmic properties >>> arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators >>> >>> arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 70 >>> +++++++++++++++++++++++- >>> 1 file changed, 67 insertions(+), 3 deletions(-) >>> >> patches are not working >> >> Thanks >> same problem, but after applying the patches my device is till hanging. ^ permalink raw reply [flat|nested] 14+ messages in thread
[parent not found: <40887d4b-0fb0-239e-e5a9-1a87f82946c2-RHPENKW2UW+1Z/+hSey0Gg@public.gmane.org>]
* Re: [PATCH 0/3] Fix broken bananapi m2 devicetree/regulators [not found] ` <40887d4b-0fb0-239e-e5a9-1a87f82946c2-RHPENKW2UW+1Z/+hSey0Gg@public.gmane.org> @ 2018-02-10 22:07 ` Philipp Rossak [not found] ` <da8909da-4eea-0fdf-e104-4442f7986455-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 0 siblings, 1 reply; 14+ messages in thread From: Philipp Rossak @ 2018-02-10 22:07 UTC (permalink / raw) To: Sergey Suloev, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw, maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r On 10.02.2018 22:08, Sergey Suloev wrote: > On 02/11/2018 12:01 AM, Philipp Rossak wrote: >> Hey Sergey, >> >> Thanks for mentioning, but I think the problem has nothing to do with >> those patches. I tested them with the v4.15.0 Kernel since this is the >> last stable release and we are right now in the merging window. >> >> I tested the latest mainline, without those patches and the kernel is >> not booting (I can't see any uart output). >> >> Thanks, >> Philipp >> >> On 10.02.2018 14:56, Sergey Suloev wrote: >>> On 02/09/2018 08:52 PM, Philipp Rossak wrote: >>>> This patchseries fixes the bananapi m1 devicetree, to be able to >>>> boot again. >>>> The first two patches update/improve the devicetree and the last >>>> patch adds >>>> all missing regulators. >>>> >>>> Regards, >>>> Philipp >>>> >>>> Philipp Rossak (3): >>>> arm: dts: sun6i: a31s: bpi-m2: update mmc supply nodes >>>> arm: dts: sun6i: a31s: bpi-m2: improve pmic properties >>>> arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators >>>> >>>> arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 70 >>>> +++++++++++++++++++++++- >>>> 1 file changed, 67 insertions(+), 3 deletions(-) >>>> >>> patches are not working >>> >>> Thanks >>> > same problem, but after applying the patches my device is till hanging. > > Can you please share a bootlog? Here is mine [1]. As you can see I'm able to boot. I build it with this branch [2]. For testing you should replace the dtb and the uImage/zImage Philipp [1]: https://pastebin.com/mVjv3LDf [2]: https://github.com/embed-3d/linux/tree/testing/bpi-m2-regulator-test-2 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org For more options, visit https://groups.google.com/d/optout. ^ permalink raw reply [flat|nested] 14+ messages in thread
[parent not found: <da8909da-4eea-0fdf-e104-4442f7986455-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]
* Re: [PATCH 0/3] Fix broken bananapi m2 devicetree/regulators [not found] ` <da8909da-4eea-0fdf-e104-4442f7986455-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> @ 2018-02-11 7:29 ` Sergey Suloev 2018-02-11 7:55 ` Sergey Suloev 1 sibling, 0 replies; 14+ messages in thread From: Sergey Suloev @ 2018-02-11 7:29 UTC (permalink / raw) To: Philipp Rossak, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw, maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r On 02/11/2018 01:07 AM, Philipp Rossak wrote: > > > On 10.02.2018 22:08, Sergey Suloev wrote: >> On 02/11/2018 12:01 AM, Philipp Rossak wrote: >>> Hey Sergey, >>> >>> Thanks for mentioning, but I think the problem has nothing to do >>> with those patches. I tested them with the v4.15.0 Kernel since this >>> is the last stable release and we are right now in the merging window. >>> >>> I tested the latest mainline, without those patches and the kernel >>> is not booting (I can't see any uart output). >>> >>> Thanks, >>> Philipp >>> >>> On 10.02.2018 14:56, Sergey Suloev wrote: >>>> On 02/09/2018 08:52 PM, Philipp Rossak wrote: >>>>> This patchseries fixes the bananapi m1 devicetree, to be able to >>>>> boot again. >>>>> The first two patches update/improve the devicetree and the last >>>>> patch adds >>>>> all missing regulators. >>>>> >>>>> Regards, >>>>> Philipp >>>>> >>>>> Philipp Rossak (3): >>>>> arm: dts: sun6i: a31s: bpi-m2: update mmc supply nodes >>>>> arm: dts: sun6i: a31s: bpi-m2: improve pmic properties >>>>> arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators >>>>> >>>>> arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 70 >>>>> +++++++++++++++++++++++- >>>>> 1 file changed, 67 insertions(+), 3 deletions(-) >>>>> >>>> patches are not working >>>> >>>> Thanks >>>> >> same problem, but after applying the patches my device is till hanging. >> >> > Can you please share a bootlog? Here is mine [1]. As you can see I'm > able to boot. > I build it with this branch [2]. For testing you should replace the > dtb and the uImage/zImage > > Philipp > > > [1]: https://pastebin.com/mVjv3LDf > [2]: > https://github.com/embed-3d/linux/tree/testing/bpi-m2-regulator-test-2 I am going to test it and come back with outcome Thanks -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 0/3] Fix broken bananapi m2 devicetree/regulators [not found] ` <da8909da-4eea-0fdf-e104-4442f7986455-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2018-02-11 7:29 ` Sergey Suloev @ 2018-02-11 7:55 ` Sergey Suloev [not found] ` <45fb86c9-2218-d00d-1952-6b79f9101049-RHPENKW2UW+1Z/+hSey0Gg@public.gmane.org> 1 sibling, 1 reply; 14+ messages in thread From: Sergey Suloev @ 2018-02-11 7:55 UTC (permalink / raw) To: Philipp Rossak, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw, maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r On 02/11/2018 01:07 AM, Philipp Rossak wrote: > > > On 10.02.2018 22:08, Sergey Suloev wrote: >> On 02/11/2018 12:01 AM, Philipp Rossak wrote: >>> Hey Sergey, >>> >>> Thanks for mentioning, but I think the problem has nothing to do >>> with those patches. I tested them with the v4.15.0 Kernel since this >>> is the last stable release and we are right now in the merging window. >>> >>> I tested the latest mainline, without those patches and the kernel >>> is not booting (I can't see any uart output). >>> >>> Thanks, >>> Philipp >>> >>> On 10.02.2018 14:56, Sergey Suloev wrote: >>>> On 02/09/2018 08:52 PM, Philipp Rossak wrote: >>>>> This patchseries fixes the bananapi m1 devicetree, to be able to >>>>> boot again. >>>>> The first two patches update/improve the devicetree and the last >>>>> patch adds >>>>> all missing regulators. >>>>> >>>>> Regards, >>>>> Philipp >>>>> >>>>> Philipp Rossak (3): >>>>> arm: dts: sun6i: a31s: bpi-m2: update mmc supply nodes >>>>> arm: dts: sun6i: a31s: bpi-m2: improve pmic properties >>>>> arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators >>>>> >>>>> arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 70 >>>>> +++++++++++++++++++++++- >>>>> 1 file changed, 67 insertions(+), 3 deletions(-) >>>>> >>>> patches are not working >>>> >>>> Thanks >>>> >> same problem, but after applying the patches my device is till hanging. >> >> > Can you please share a bootlog? Here is mine [1]. As you can see I'm > able to boot. > I build it with this branch [2]. For testing you should replace the > dtb and the uImage/zImage > > Philipp > > > [1]: https://pastebin.com/mVjv3LDf > [2]: > https://github.com/embed-3d/linux/tree/testing/bpi-m2-regulator-test-2 My dmesg is very similar to yours unless it hangs on the last line [1]. For this test I used kernel from tag v4.15 with no additional patching. [1] https://pastebin.com/3a6bk5Dk -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 14+ messages in thread
[parent not found: <45fb86c9-2218-d00d-1952-6b79f9101049-RHPENKW2UW+1Z/+hSey0Gg@public.gmane.org>]
* Re: [PATCH 0/3] Fix broken bananapi m2 devicetree/regulators [not found] ` <45fb86c9-2218-d00d-1952-6b79f9101049-RHPENKW2UW+1Z/+hSey0Gg@public.gmane.org> @ 2018-02-11 11:30 ` Philipp Rossak 2018-02-11 11:36 ` Sergey Suloev [not found] ` <1518348631.1342.1.camel-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 0 siblings, 2 replies; 14+ messages in thread From: Philipp Rossak @ 2018-02-11 11:30 UTC (permalink / raw) To: Sergey Suloev, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw, maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r Am Sonntag, den 11.02.2018, 10:55 +0300 schrieb Sergey Suloev: > On 02/11/2018 01:07 AM, Philipp Rossak wrote: > > > > > > On 10.02.2018 22:08, Sergey Suloev wrote: > > > On 02/11/2018 12:01 AM, Philipp Rossak wrote: > > > > Hey Sergey, > > > > > > > > Thanks for mentioning, but I think the problem has nothing to > > > > do > > > > with those patches. I tested them with the v4.15.0 Kernel since > > > > this > > > > is the last stable release and we are right now in the merging > > > > window. > > > > > > > > I tested the latest mainline, without those patches and the > > > > kernel > > > > is not booting (I can't see any uart output). > > > > > > > > Thanks, > > > > Philipp > > > > > > > > On 10.02.2018 14:56, Sergey Suloev wrote: > > > > > On 02/09/2018 08:52 PM, Philipp Rossak wrote: > > > > > > This patchseries fixes the bananapi m1 devicetree, to be > > > > > > able to > > > > > > boot again. > > > > > > The first two patches update/improve the devicetree and the > > > > > > last > > > > > > patch adds > > > > > > all missing regulators. > > > > > > > > > > > > Regards, > > > > > > Philipp > > > > > > > > > > > > Philipp Rossak (3): > > > > > > arm: dts: sun6i: a31s: bpi-m2: update mmc supply nodes > > > > > > arm: dts: sun6i: a31s: bpi-m2: improve pmic properties > > > > > > arm: dts: sun6i: a31s: fix: bpi-m2: add missing > > > > > > regulators > > > > > > > > > > > > arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 70 > > > > > > +++++++++++++++++++++++- > > > > > > 1 file changed, 67 insertions(+), 3 deletions(-) > > > > > > > > > > > > > > > > patches are not working > > > > > > > > > > Thanks > > > > > > > > > > > same problem, but after applying the patches my device is till > > > hanging. > > > > > > > > > > Can you please share a bootlog? Here is mine [1]. As you can see > > I'm > > able to boot. > > I build it with this branch [2]. For testing you should replace > > the > > dtb and the uImage/zImage > > > > Philipp > > > > > > [1]: https://pastebin.com/mVjv3LDf > > [2]: > > https://github.com/embed-3d/linux/tree/testing/bpi-m2-regulator-tes > > t-2 > > My dmesg is very similar to yours unless it hangs on the last line > [1]. > For this test I used kernel from tag v4.15 with no additional > patching. > > [1] https://pastebin.com/3a6bk5Dk > > For me it looks like you have a different kernel and also an different dtb that you patch! And you are applying also a fixup script. These patches should be applied on top of linux mainline. fixup script: Applying kernel provided DT fixup script (sun6i-a31s-fixup.scr) Linux versions: 4.15.0-00003-g1bbe5edde691 vs 4.15.0-sunxi-dirty In addition to that you are also booting into fb/hdmi. If you use my branch (uImage and dtb) and replace the current boot.cmd with this (to get the boot.scr you need to use mkimage) it should work: setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait panic=10 load mmc 0:1 0x43000000 ${fdtfile} || load mmc 0:1 0x43000000 boot/${fdtfile} load mmc 0:1 0x42000000 uImage || load mmc 0:1 0x42000000 boot/uImage bootm 0x42000000 - 0x43000000 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org For more options, visit https://groups.google.com/d/optout. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 0/3] Fix broken bananapi m2 devicetree/regulators 2018-02-11 11:30 ` Philipp Rossak @ 2018-02-11 11:36 ` Sergey Suloev [not found] ` <1518348631.1342.1.camel-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 1 sibling, 0 replies; 14+ messages in thread From: Sergey Suloev @ 2018-02-11 11:36 UTC (permalink / raw) To: Philipp Rossak, robh+dt, mark.rutland, linux, maxime.ripard, wens Cc: devicetree, linux-sunxi, linux-kernel, linux-arm-kernel On 02/11/2018 02:30 PM, Philipp Rossak wrote: > Am Sonntag, den 11.02.2018, 10:55 +0300 schrieb Sergey Suloev: >> On 02/11/2018 01:07 AM, Philipp Rossak wrote: >>> >>> On 10.02.2018 22:08, Sergey Suloev wrote: >>>> On 02/11/2018 12:01 AM, Philipp Rossak wrote: >>>>> Hey Sergey, >>>>> >>>>> Thanks for mentioning, but I think the problem has nothing to >>>>> do >>>>> with those patches. I tested them with the v4.15.0 Kernel since >>>>> this >>>>> is the last stable release and we are right now in the merging >>>>> window. >>>>> >>>>> I tested the latest mainline, without those patches and the >>>>> kernel >>>>> is not booting (I can't see any uart output). >>>>> >>>>> Thanks, >>>>> Philipp >>>>> >>>>> On 10.02.2018 14:56, Sergey Suloev wrote: >>>>>> On 02/09/2018 08:52 PM, Philipp Rossak wrote: >>>>>>> This patchseries fixes the bananapi m1 devicetree, to be >>>>>>> able to >>>>>>> boot again. >>>>>>> The first two patches update/improve the devicetree and the >>>>>>> last >>>>>>> patch adds >>>>>>> all missing regulators. >>>>>>> >>>>>>> Regards, >>>>>>> Philipp >>>>>>> >>>>>>> Philipp Rossak (3): >>>>>>> arm: dts: sun6i: a31s: bpi-m2: update mmc supply nodes >>>>>>> arm: dts: sun6i: a31s: bpi-m2: improve pmic properties >>>>>>> arm: dts: sun6i: a31s: fix: bpi-m2: add missing >>>>>>> regulators >>>>>>> >>>>>>> arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 70 >>>>>>> +++++++++++++++++++++++- >>>>>>> 1 file changed, 67 insertions(+), 3 deletions(-) >>>>>>> >>>>>> patches are not working >>>>>> >>>>>> Thanks >>>>>> >>>> same problem, but after applying the patches my device is till >>>> hanging. >>>> >>>> >>> Can you please share a bootlog? Here is mine [1]. As you can see >>> I'm >>> able to boot. >>> I build it with this branch [2]. For testing you should replace >>> the >>> dtb and the uImage/zImage >>> >>> Philipp >>> >>> >>> [1]: https://pastebin.com/mVjv3LDf >>> [2]: >>> https://github.com/embed-3d/linux/tree/testing/bpi-m2-regulator-tes >>> t-2 >> My dmesg is very similar to yours unless it hangs on the last line >> [1]. >> For this test I used kernel from tag v4.15 with no additional >> patching. >> >> [1] https://pastebin.com/3a6bk5Dk >> >> > For me it looks like you have a different kernel and also an different > dtb that you patch! And you are applying also a fixup script. > These patches should be applied on top of linux mainline. > > fixup script: > Applying kernel provided DT fixup script (sun6i-a31s-fixup.scr) > > > Linux versions: > 4.15.0-00003-g1bbe5edde691 vs 4.15.0-sunxi-dirty > > In addition to that you are also booting into fb/hdmi. > > If you use my branch (uImage and dtb) and replace the current boot.cmd > with this (to get the boot.scr you need to use mkimage) it should work: > > setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait > panic=10 > load mmc 0:1 0x43000000 ${fdtfile} || load mmc 0:1 0x43000000 > boot/${fdtfile} > load mmc 0:1 0x42000000 uImage || load mmc 0:1 0x42000000 boot/uImage > bootm 0x42000000 - 0x43000000 > the script is doing nothing, it is empty. The problem is related to hdmi. The following dts code makes it happen: &hdmi { status = "okay"; }; ^ permalink raw reply [flat|nested] 14+ messages in thread
[parent not found: <1518348631.1342.1.camel-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]
* Re: [PATCH 0/3] Fix broken bananapi m2 devicetree/regulators [not found] ` <1518348631.1342.1.camel-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> @ 2018-02-11 11:44 ` Sergey Suloev 0 siblings, 0 replies; 14+ messages in thread From: Sergey Suloev @ 2018-02-11 11:44 UTC (permalink / raw) To: Philipp Rossak, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw, maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r On 02/11/2018 02:30 PM, Philipp Rossak wrote: > Am Sonntag, den 11.02.2018, 10:55 +0300 schrieb Sergey Suloev: >> On 02/11/2018 01:07 AM, Philipp Rossak wrote: >>> >>> On 10.02.2018 22:08, Sergey Suloev wrote: >>>> On 02/11/2018 12:01 AM, Philipp Rossak wrote: >>>>> Hey Sergey, >>>>> >>>>> Thanks for mentioning, but I think the problem has nothing to >>>>> do >>>>> with those patches. I tested them with the v4.15.0 Kernel since >>>>> this >>>>> is the last stable release and we are right now in the merging >>>>> window. >>>>> >>>>> I tested the latest mainline, without those patches and the >>>>> kernel >>>>> is not booting (I can't see any uart output). >>>>> >>>>> Thanks, >>>>> Philipp >>>>> >>>>> On 10.02.2018 14:56, Sergey Suloev wrote: >>>>>> On 02/09/2018 08:52 PM, Philipp Rossak wrote: >>>>>>> This patchseries fixes the bananapi m1 devicetree, to be >>>>>>> able to >>>>>>> boot again. >>>>>>> The first two patches update/improve the devicetree and the >>>>>>> last >>>>>>> patch adds >>>>>>> all missing regulators. >>>>>>> >>>>>>> Regards, >>>>>>> Philipp >>>>>>> >>>>>>> Philipp Rossak (3): >>>>>>> arm: dts: sun6i: a31s: bpi-m2: update mmc supply nodes >>>>>>> arm: dts: sun6i: a31s: bpi-m2: improve pmic properties >>>>>>> arm: dts: sun6i: a31s: fix: bpi-m2: add missing >>>>>>> regulators >>>>>>> >>>>>>> arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 70 >>>>>>> +++++++++++++++++++++++- >>>>>>> 1 file changed, 67 insertions(+), 3 deletions(-) >>>>>>> >>>>>> patches are not working >>>>>> >>>>>> Thanks >>>>>> >>>> same problem, but after applying the patches my device is till >>>> hanging. >>>> >>>> >>> Can you please share a bootlog? Here is mine [1]. As you can see >>> I'm >>> able to boot. >>> I build it with this branch [2]. For testing you should replace >>> the >>> dtb and the uImage/zImage >>> >>> Philipp >>> >>> >>> [1]: https://pastebin.com/mVjv3LDf >>> [2]: >>> https://github.com/embed-3d/linux/tree/testing/bpi-m2-regulator-tes >>> t-2 >> My dmesg is very similar to yours unless it hangs on the last line >> [1]. >> For this test I used kernel from tag v4.15 with no additional >> patching. >> >> [1] https://pastebin.com/3a6bk5Dk >> >> > For me it looks like you have a different kernel and also an different > dtb that you patch! And you are applying also a fixup script. > These patches should be applied on top of linux mainline. > > fixup script: > Applying kernel provided DT fixup script (sun6i-a31s-fixup.scr) > > > Linux versions: > 4.15.0-00003-g1bbe5edde691 vs 4.15.0-sunxi-dirty > > In addition to that you are also booting into fb/hdmi. > > If you use my branch (uImage and dtb) and replace the current boot.cmd > with this (to get the boot.scr you need to use mkimage) it should work: > > setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait > panic=10 > load mmc 0:1 0x43000000 ${fdtfile} || load mmc 0:1 0x43000000 > boot/${fdtfile} > load mmc 0:1 0x42000000 uImage || load mmc 0:1 0x42000000 boot/uImage > bootm 0x42000000 - 0x43000000 > ok, I confirm that your patches are not related to the issue. It is the problem with sun4i drm / hdmi which is not working on bpi m2. Thanks -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2018-02-11 22:15 UTC | newest] Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2018-02-09 17:52 [PATCH 0/3] Fix broken bananapi m2 devicetree/regulators Philipp Rossak [not found] ` <20180209175236.21215-1-embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2018-02-09 17:52 ` [PATCH 1/3] arm: dts: sun6i: a31s: bpi-m2: update mmc supply nodes Philipp Rossak [not found] ` <20180209175236.21215-2-embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2018-02-11 22:15 ` Philipp Rossak 2018-02-09 17:52 ` [PATCH 2/3] arm: dts: sun6i: a31s: bpi-m2: improve pmic properties Philipp Rossak 2018-02-09 17:52 ` [PATCH 3/3] arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators Philipp Rossak 2018-02-10 13:56 ` [PATCH 0/3] Fix broken bananapi m2 devicetree/regulators Sergey Suloev [not found] ` <160b60e2-6e50-0d63-e6ac-b67e10317e12-RHPENKW2UW+1Z/+hSey0Gg@public.gmane.org> 2018-02-10 21:01 ` Philipp Rossak 2018-02-10 21:08 ` Sergey Suloev [not found] ` <40887d4b-0fb0-239e-e5a9-1a87f82946c2-RHPENKW2UW+1Z/+hSey0Gg@public.gmane.org> 2018-02-10 22:07 ` Philipp Rossak [not found] ` <da8909da-4eea-0fdf-e104-4442f7986455-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2018-02-11 7:29 ` Sergey Suloev 2018-02-11 7:55 ` Sergey Suloev [not found] ` <45fb86c9-2218-d00d-1952-6b79f9101049-RHPENKW2UW+1Z/+hSey0Gg@public.gmane.org> 2018-02-11 11:30 ` Philipp Rossak 2018-02-11 11:36 ` Sergey Suloev [not found] ` <1518348631.1342.1.camel-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2018-02-11 11:44 ` Sergey Suloev
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).