[PATCH 0/8] ata: ahci_brcm: Fixes and new device support

[PATCH 0/8] ata: ahci_brcm: Fixes and new device support

[Florian Fainelli]

Hi Jens,

The first 4 patches are fixes and should ideally be queued up/picked up
by stable. The last 4 patches add support for BCM7216 which is one of
our latest devices supported by this driver.

Patch #2 does a few things, but it was pretty badly broken before and it
is hard not to fix all call sites (probe, suspend, resume) in one shot.

Please let me know if you have any comments.

Thanks!

Florian Fainelli (8):
  ata: libahci_platform: Export again ahci_platform_<en/dis>able_phys()
  ata: ahci_brcm: Fix AHCI resources management
  ata: ahci_brcm: BCM7425 AHCI requires AHCI_HFLAG_DELAY_ENGINE
  ata: ahci_brcm: Add missing clock management during recovery
  ata: ahci_brcm: Manage reset line during suspend/resume
  ata: ahci_brcm: Add a shutdown callback
  dt-bindings: ata: Document BCM7216 AHCI controller compatible
  ata: ahci_brcm: Support BCM7216 reset controller name

 .../bindings/ata/brcm,sata-brcm.txt           |   7 +
 drivers/ata/ahci_brcm.c                       | 167 ++++++++++++++----
 drivers/ata/libahci_platform.c                |   6 +-
 include/linux/ahci_platform.h                 |   2 +
 4 files changed, 141 insertions(+), 41 deletions(-)

-- 
2.17.1

[PATCH 1/8] ata: libahci_platform: Export again ahci_platform_<en/dis>able_phys()

[Florian Fainelli]

This reverts commit 6bb86fefa086faba7b60bb452300b76a47cde1a5
("libahci_platform: Staticize ahci_platform_<en/dis>able_phys()") we are
going to need ahci_platform_{enable,disable}_phys() in a subsequent
commit for ahci_brcm.c in order to properly control the PHY
initialization order.

Also make sure the function prototypes are declared in
include/linux/ahci_platform.h as a result.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/ata/libahci_platform.c | 6 ++++--
 include/linux/ahci_platform.h  | 2 ++
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index 8befce036af8..129556fcf6be 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -43,7 +43,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_ops);
  * RETURNS:
  * 0 on success otherwise a negative error code
  */
-static int ahci_platform_enable_phys(struct ahci_host_priv *hpriv)
+int ahci_platform_enable_phys(struct ahci_host_priv *hpriv)
 {
 	int rc, i;
 
@@ -74,6 +74,7 @@ static int ahci_platform_enable_phys(struct ahci_host_priv *hpriv)
 	}
 	return rc;
 }
+EXPORT_SYMBOL_GPL(ahci_platform_enable_phys);
 
 /**
  * ahci_platform_disable_phys - Disable PHYs
@@ -81,7 +82,7 @@ static int ahci_platform_enable_phys(struct ahci_host_priv *hpriv)
  *
  * This function disables all PHYs found in hpriv->phys.
  */
-static void ahci_platform_disable_phys(struct ahci_host_priv *hpriv)
+void ahci_platform_disable_phys(struct ahci_host_priv *hpriv)
 {
 	int i;
 
@@ -90,6 +91,7 @@ static void ahci_platform_disable_phys(struct ahci_host_priv *hpriv)
 		phy_exit(hpriv->phys[i]);
 	}
 }
+EXPORT_SYMBOL_GPL(ahci_platform_disable_phys);
 
 /**
  * ahci_platform_enable_clks - Enable platform clocks
diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
index 6782f0d45ebe..49e5383d4222 100644
--- a/include/linux/ahci_platform.h
+++ b/include/linux/ahci_platform.h
@@ -19,6 +19,8 @@ struct ahci_host_priv;
 struct platform_device;
 struct scsi_host_template;
 
+int ahci_platform_enable_phys(struct ahci_host_priv *hpriv);
+void ahci_platform_disable_phys(struct ahci_host_priv *hpriv);
 int ahci_platform_enable_clks(struct ahci_host_priv *hpriv);
 void ahci_platform_disable_clks(struct ahci_host_priv *hpriv);
 int ahci_platform_enable_regulators(struct ahci_host_priv *hpriv);
-- 
2.17.1

[PATCH 2/8] ata: ahci_brcm: Fix AHCI resources management

[Florian Fainelli]

The AHCI resources management within ahci_brcm.c is a little
convoluted, largely because it historically had a dedicated clock that
was managed within this file in the downstream tree. Once brough
upstream though, the clock was left to be managed by libahci_platform.c
which is entirely appropriate.

This patch series ensures that the AHCI resources are fetched and
enabled before any register access is done, thus avoiding bus errors on
platforms which clock gate the controller by default.

As a result we need to re-arrange the suspend() and resume() functions
in order to avoid accessing registers after the clocks have been turned
off respectively before the clocks have been turned on. Finally, we can
refactor brcm_ahci_get_portmask() in order to fetch the number of ports
from hpriv->mmio which is now accessible without jumping through hoops
like we used to do.

The commit pointed in the Fixes tag is both old and new enough not to
require major headaches for backporting of this patch.

Fixes: eba68f829794 ("ata: ahci_brcmstb: rename to support across Broadcom SoC's")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/ata/ahci_brcm.c | 105 +++++++++++++++++++++++++++++-----------
 1 file changed, 76 insertions(+), 29 deletions(-)

diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index f41744b9b38a..a8b2f3f7bbbc 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -213,19 +213,12 @@ static void brcm_sata_phys_disable(struct brcm_ahci_priv *priv)
 			brcm_sata_phy_disable(priv, i);
 }
 
-static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
+static u32 brcm_ahci_get_portmask(struct ahci_host_priv *hpriv,
 				  struct brcm_ahci_priv *priv)
 {
-	void __iomem *ahci;
-	struct resource *res;
 	u32 impl;
 
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci");
-	ahci = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(ahci))
-		return 0;
-
-	impl = readl(ahci + HOST_PORTS_IMPL);
+	impl = readl(hpriv->mmio + HOST_PORTS_IMPL);
 
 	if (fls(impl) > SATA_TOP_MAX_PHYS)
 		dev_warn(priv->dev, "warning: more ports than PHYs (%#x)\n",
@@ -233,9 +226,6 @@ static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
 	else if (!impl)
 		dev_info(priv->dev, "no ports found\n");
 
-	devm_iounmap(&pdev->dev, ahci);
-	devm_release_mem_region(&pdev->dev, res->start, resource_size(res));
-
 	return impl;
 }
 
@@ -347,11 +337,10 @@ static int brcm_ahci_suspend(struct device *dev)
 	struct ata_host *host = dev_get_drvdata(dev);
 	struct ahci_host_priv *hpriv = host->private_data;
 	struct brcm_ahci_priv *priv = hpriv->plat_data;
-	int ret;
 
-	ret = ahci_platform_suspend(dev);
 	brcm_sata_phys_disable(priv);
-	return ret;
+
+	return ahci_platform_suspend(dev);
 }
 
 static int brcm_ahci_resume(struct device *dev)
@@ -359,11 +348,44 @@ static int brcm_ahci_resume(struct device *dev)
 	struct ata_host *host = dev_get_drvdata(dev);
 	struct ahci_host_priv *hpriv = host->private_data;
 	struct brcm_ahci_priv *priv = hpriv->plat_data;
+	int ret;
+
+	/* Make sure clocks are turned on before re-configuration */
+	ret = ahci_platform_enable_clks(hpriv);
+	if (ret)
+		return ret;
 
 	brcm_sata_init(priv);
 	brcm_sata_phys_enable(priv);
 	brcm_sata_alpm_init(hpriv);
-	return ahci_platform_resume(dev);
+
+	/* Since we had to enable clocks earlier on, we cannot use
+	 * ahci_platform_resume() as-is since a second call to
+	 * ahci_platform_enable_resources() would bump up the resources
+	 * (regulators, clocks, PHYs) count artificially so we copy the part
+	 * after ahci_platform_enable_resources().
+	 */
+	ret = ahci_platform_enable_phys(hpriv);
+	if (ret)
+		goto out_disable_phys;
+
+	ret = ahci_platform_resume_host(dev);
+	if (ret)
+		goto out_disable_platform_phys;
+
+	/* We resumed so update PM runtime state */
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+
+out_disable_platform_phys:
+	ahci_platform_disable_phys(hpriv);
+out_disable_phys:
+	brcm_sata_phys_disable(priv);
+	ahci_platform_disable_clks(hpriv);
+	return ret;
 }
 #endif
 
@@ -416,38 +438,63 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 		priv->quirks |= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE;
 	}
 
+	hpriv = ahci_platform_get_resources(pdev, 0);
+	if (IS_ERR(hpriv)) {
+		ret = PTR_ERR(hpriv);
+		goto out_reset;
+	}
+
+	ret = ahci_platform_enable_clks(hpriv);
+	if (ret)
+		goto out_reset;
+
+	/* Must be first so as to configure endianness including that
+	 * of the standard AHCI register space.
+	 */
 	brcm_sata_init(priv);
 
-	priv->port_mask = brcm_ahci_get_portmask(pdev, priv);
-	if (!priv->port_mask)
-		return -ENODEV;
+	/* Initializes priv->port_mask which is used below */
+	priv->port_mask = brcm_ahci_get_portmask(hpriv, priv);
+	if (!priv->port_mask) {
+		ret = -ENODEV;
+		goto out_disable_clks;
+	}
 
+	/* Must be done before ahci_platform_enable_phys() */
 	brcm_sata_phys_enable(priv);
 
-	hpriv = ahci_platform_get_resources(pdev, 0);
-	if (IS_ERR(hpriv))
-		return PTR_ERR(hpriv);
 	hpriv->plat_data = priv;
 	hpriv->flags = AHCI_HFLAG_WAKE_BEFORE_STOP;
 
 	brcm_sata_alpm_init(hpriv);
 
-	ret = ahci_platform_enable_resources(hpriv);
-	if (ret)
-		return ret;
-
 	if (priv->quirks & BRCM_AHCI_QUIRK_NO_NCQ)
 		hpriv->flags |= AHCI_HFLAG_NO_NCQ;
 	hpriv->flags |= AHCI_HFLAG_NO_WRITE_TO_RO;
 
+	ret = ahci_platform_enable_phys(hpriv);
+	if (ret)
+		goto out_disable_phys;
+
 	ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info,
 				      &ahci_platform_sht);
 	if (ret)
-		return ret;
+		goto out_disable_platform_phys;
 
 	dev_info(dev, "Broadcom AHCI SATA3 registered\n");
 
 	return 0;
+
+out_disable_platform_phys:
+	ahci_platform_disable_phys(hpriv);
+out_disable_phys:
+	brcm_sata_phys_disable(priv);
+out_disable_clks:
+	ahci_platform_disable_clks(hpriv);
+out_reset:
+	if (!IS_ERR_OR_NULL(priv->rcdev))
+		reset_control_assert(priv->rcdev);
+	return ret;
 }
 
 static int brcm_ahci_remove(struct platform_device *pdev)
@@ -457,12 +504,12 @@ static int brcm_ahci_remove(struct platform_device *pdev)
 	struct brcm_ahci_priv *priv = hpriv->plat_data;
 	int ret;
 
+	brcm_sata_phys_disable(priv);
+
 	ret = ata_platform_remove_one(pdev);
 	if (ret)
 		return ret;
 
-	brcm_sata_phys_disable(priv);
-
 	return 0;
 }
 
-- 
2.17.1

[PATCH 3/8] ata: ahci_brcm: BCM7425 AHCI requires AHCI_HFLAG_DELAY_ENGINE

[Florian Fainelli]

Set AHCI_HFLAG_DELAY_ENGINE for the BCM7425 AHCI controller thus making
it conforming to the 'strict' AHCI implementation which this controller
is based on.

This solves long link establishment with specific hard drives (e.g.:
Seagate ST1000VM002-9ZL1 SC12) that would otherwise have to complete the
error recovery handling before finally establishing a succesful SATA
link at the desired speed.

We re-order the hpriv->flags assignment to also remove the NONCQ quirk
since we can set the flag directly.

Fixes: 9586114cf1e9 ("ata: ahci_brcmstb: add support MIPS-based platforms")
Fixes: 423be77daabe ("ata: ahci_brcmstb: add quirk for broken ncq")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/ata/ahci_brcm.c | 31 ++++++++++++++++---------------
 1 file changed, 16 insertions(+), 15 deletions(-)

diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index a8b2f3f7bbbc..58f8fd7bb8b8 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -76,8 +76,7 @@ enum brcm_ahci_version {
 };
 
 enum brcm_ahci_quirks {
-	BRCM_AHCI_QUIRK_NO_NCQ		= BIT(0),
-	BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE	= BIT(1),
+	BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE	= BIT(0),
 };
 
 struct brcm_ahci_priv {
@@ -432,18 +431,27 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 	if (!IS_ERR_OR_NULL(priv->rcdev))
 		reset_control_deassert(priv->rcdev);
 
-	if ((priv->version == BRCM_SATA_BCM7425) ||
-		(priv->version == BRCM_SATA_NSP)) {
-		priv->quirks |= BRCM_AHCI_QUIRK_NO_NCQ;
-		priv->quirks |= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE;
-	}
-
 	hpriv = ahci_platform_get_resources(pdev, 0);
 	if (IS_ERR(hpriv)) {
 		ret = PTR_ERR(hpriv);
 		goto out_reset;
 	}
 
+	hpriv->plat_data = priv;
+	hpriv->flags = AHCI_HFLAG_WAKE_BEFORE_STOP | AHCI_HFLAG_NO_WRITE_TO_RO;
+
+	switch (priv->version) {
+	case BRCM_SATA_BCM7425:
+		hpriv->flags |= AHCI_HFLAG_DELAY_ENGINE;
+		/* fall through */
+	case BRCM_SATA_NSP:
+		hpriv->flags |= AHCI_HFLAG_NO_NCQ;
+		priv->quirks |= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE;
+		break;
+	default:
+		break;
+	}
+
 	ret = ahci_platform_enable_clks(hpriv);
 	if (ret)
 		goto out_reset;
@@ -463,15 +471,8 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 	/* Must be done before ahci_platform_enable_phys() */
 	brcm_sata_phys_enable(priv);
 
-	hpriv->plat_data = priv;
-	hpriv->flags = AHCI_HFLAG_WAKE_BEFORE_STOP;
-
 	brcm_sata_alpm_init(hpriv);
 
-	if (priv->quirks & BRCM_AHCI_QUIRK_NO_NCQ)
-		hpriv->flags |= AHCI_HFLAG_NO_NCQ;
-	hpriv->flags |= AHCI_HFLAG_NO_WRITE_TO_RO;
-
 	ret = ahci_platform_enable_phys(hpriv);
 	if (ret)
 		goto out_disable_phys;
-- 
2.17.1

[PATCH 4/8] ata: ahci_brcm: Add missing clock management during recovery

[Florian Fainelli]

The downstream implementation of ahci_brcm.c did contain clock
management recovery, but until recently, did that outside of the
libahci_platform helpers and this was unintentionally stripped out while
forward porting the patch upstream.

Add the missing clock management during recovery and sleep for 10
milliseconds per the design team recommendations to ensure the SATA PHY
controller and AFE have been fully quiesced.

Fixes: eb73390ae241 ("ata: ahci_brcm: Recover from failures to identify devices")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/ata/ahci_brcm.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index 58f8fd7bb8b8..66a570d0da83 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -274,6 +274,13 @@ static unsigned int brcm_ahci_read_id(struct ata_device *dev,
 	/* Perform the SATA PHY reset sequence */
 	brcm_sata_phy_disable(priv, ap->port_no);
 
+	/* Reset the SATA clock */
+	ahci_platform_disable_clks(hpriv);
+	msleep(10);
+
+	ahci_platform_enable_clks(hpriv);
+	msleep(10);
+
 	/* Bring the PHY back on */
 	brcm_sata_phy_enable(priv, ap->port_no);
 
-- 
2.17.1

[PATCH 5/8] ata: ahci_brcm: Manage reset line during suspend/resume

[Florian Fainelli]

We were not managing the reset line during suspend/resume, but this
needs to be done to ensure that the controller can exit low power modes
correctly, especially with deep sleep suspend mode that may reset parts
of the logic.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/ata/ahci_brcm.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index 66a570d0da83..76612577a59a 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -343,10 +343,16 @@ static int brcm_ahci_suspend(struct device *dev)
 	struct ata_host *host = dev_get_drvdata(dev);
 	struct ahci_host_priv *hpriv = host->private_data;
 	struct brcm_ahci_priv *priv = hpriv->plat_data;
+	int ret;
 
 	brcm_sata_phys_disable(priv);
 
-	return ahci_platform_suspend(dev);
+	ret = ahci_platform_suspend(dev);
+
+	if (!IS_ERR_OR_NULL(priv->rcdev))
+		reset_control_assert(priv->rcdev);
+
+	return ret;
 }
 
 static int brcm_ahci_resume(struct device *dev)
@@ -354,7 +360,12 @@ static int brcm_ahci_resume(struct device *dev)
 	struct ata_host *host = dev_get_drvdata(dev);
 	struct ahci_host_priv *hpriv = host->private_data;
 	struct brcm_ahci_priv *priv = hpriv->plat_data;
-	int ret;
+	int ret = 0;
+
+	if (!IS_ERR_OR_NULL(priv->rcdev))
+		ret = reset_control_deassert(priv->rcdev);
+	if (ret)
+		return ret;
 
 	/* Make sure clocks are turned on before re-configuration */
 	ret = ahci_platform_enable_clks(hpriv);
-- 
2.17.1

[PATCH 6/8] ata: ahci_brcm: Add a shutdown callback

[Florian Fainelli]

Make sure that we quiesce the controller and shut down the clocks in a
shutdown callback.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/ata/ahci_brcm.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index 76612577a59a..58e1a6e5478d 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -532,11 +532,26 @@ static int brcm_ahci_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static void brcm_ahci_shutdown(struct platform_device *pdev)
+{
+	int ret;
+
+	/* All resources releasing happens via devres, but our device, unlike a
+	 * proper remove is not disappearing, therefore using
+	 * brcm_ahci_suspend() here which does explicit power management is
+	 * appropriate.
+	 */
+	ret = brcm_ahci_suspend(&pdev->dev);
+	if (ret)
+		dev_err(&pdev->dev, "failed to shutdown\n");
+}
+
 static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume);
 
 static struct platform_driver brcm_ahci_driver = {
 	.probe = brcm_ahci_probe,
 	.remove = brcm_ahci_remove,
+	.shutdown = brcm_ahci_shutdown,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = ahci_of_match,
-- 
2.17.1

[PATCH 7/8] dt-bindings: ata: Document BCM7216 AHCI controller compatible

[Florian Fainelli]

The BCM7216 AHCI controller makes use of a specific reset controller
line/name, document the compatible string and the optional reset
properties.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
index 7713a413c6a7..b9ae4ce4a0a0 100644
--- a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
+++ b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
@@ -5,6 +5,7 @@ Each SATA controller should have its own node.
 
 Required properties:
 - compatible         : should be one or more of
+			"brcm,bcm7216-ahci"
 			"brcm,bcm7425-ahci"
 			"brcm,bcm7445-ahci"
 			"brcm,bcm-nsp-ahci"
@@ -14,6 +15,12 @@ Required properties:
 - reg-names          : "ahci" and "top-ctrl"
 - interrupts         : interrupt mapping for SATA IRQ
 
+Optional properties:
+
+- reset: for "brcm,bcm7216-ahci" must be a valid reset phandle
+  pointing to the RESCAL reset controller provider node.
+- reset-names: for "brcm,bcm7216-ahci", must be "rescal".
+
 Also see ahci-platform.txt.
 
 Example:
-- 
2.17.1

[PATCH 8/8] ata: ahci_brcm: Support BCM7216 reset controller name

[Florian Fainelli]

BCM7216 uses a different reset controller name which is "rescal" instead
of "ahci", match the compatible string to account for that minor
difference, the reset is otherwise identical to how other generations of
SATA controllers work.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/ata/ahci_brcm.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index 58e1a6e5478d..13ceca687104 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -73,6 +73,7 @@ enum brcm_ahci_version {
 	BRCM_SATA_BCM7425 = 1,
 	BRCM_SATA_BCM7445,
 	BRCM_SATA_NSP,
+	BRCM_SATA_BCM7216,
 };
 
 enum brcm_ahci_quirks {
@@ -415,6 +416,7 @@ static const struct of_device_id ahci_of_match[] = {
 	{.compatible = "brcm,bcm7445-ahci", .data = (void *)BRCM_SATA_BCM7445},
 	{.compatible = "brcm,bcm63138-ahci", .data = (void *)BRCM_SATA_BCM7445},
 	{.compatible = "brcm,bcm-nsp-ahci", .data = (void *)BRCM_SATA_NSP},
+	{.compatible = "brcm,bcm7216-ahci", .data = (void *)BRCM_SATA_BCM7216},
 	{},
 };
 MODULE_DEVICE_TABLE(of, ahci_of_match);
@@ -423,6 +425,7 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *of_id;
 	struct device *dev = &pdev->dev;
+	const char *reset_name = NULL;
 	struct brcm_ahci_priv *priv;
 	struct ahci_host_priv *hpriv;
 	struct resource *res;
@@ -444,8 +447,13 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->top_ctrl))
 		return PTR_ERR(priv->top_ctrl);
 
-	/* Reset is optional depending on platform */
-	priv->rcdev = devm_reset_control_get(&pdev->dev, "ahci");
+	/* Reset is optional depending on platform and named differently */
+	if (priv->version == BRCM_SATA_BCM7216)
+		reset_name = "rescal";
+	else
+		reset_name = "ahci";
+
+	priv->rcdev = devm_reset_control_get(&pdev->dev, reset_name);
 	if (!IS_ERR_OR_NULL(priv->rcdev))
 		reset_control_deassert(priv->rcdev);
 
-- 
2.17.1

Re: [PATCH 0/8] ata: ahci_brcm: Fixes and new device support

[Hans de Goede]

Hi,

On 10-12-2019 19:53, Florian Fainelli wrote:
> Hi Jens,
> 
> The first 4 patches are fixes and should ideally be queued up/picked up
> by stable. The last 4 patches add support for BCM7216 which is one of
> our latest devices supported by this driver.
> 
> Patch #2 does a few things, but it was pretty badly broken before and it
> is hard not to fix all call sites (probe, suspend, resume) in one shot.
> 
> Please let me know if you have any comments.
> 
> Thanks!

The entire series looks good to me:

Reviewed-by: Hans de Goede <hdegoede@redhat.com>

Regards,

Hans



> 
> Florian Fainelli (8):
>    ata: libahci_platform: Export again ahci_platform_<en/dis>able_phys()
>    ata: ahci_brcm: Fix AHCI resources management
>    ata: ahci_brcm: BCM7425 AHCI requires AHCI_HFLAG_DELAY_ENGINE
>    ata: ahci_brcm: Add missing clock management during recovery
>    ata: ahci_brcm: Manage reset line during suspend/resume
>    ata: ahci_brcm: Add a shutdown callback
>    dt-bindings: ata: Document BCM7216 AHCI controller compatible
>    ata: ahci_brcm: Support BCM7216 reset controller name
> 
>   .../bindings/ata/brcm,sata-brcm.txt           |   7 +
>   drivers/ata/ahci_brcm.c                       | 167 ++++++++++++++----
>   drivers/ata/libahci_platform.c                |   6 +-
>   include/linux/ahci_platform.h                 |   2 +
>   4 files changed, 141 insertions(+), 41 deletions(-)
> 

Re: [PATCH 7/8] dt-bindings: ata: Document BCM7216 AHCI controller compatible

[Rob Herring]

On Tue, 10 Dec 2019 10:53:50 -0800, Florian Fainelli wrote:
> The BCM7216 AHCI controller makes use of a specific reset controller
> line/name, document the compatible string and the optional reset
> properties.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
>  Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt | 7 +++++++
>  1 file changed, 7 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH 0/8] ata: ahci_brcm: Fixes and new device support

[Florian Fainelli]

On 12/11/2019 5:31 AM, Hans de Goede wrote:
> Hi,
> 
> On 10-12-2019 19:53, Florian Fainelli wrote:
>> Hi Jens,
>>
>> The first 4 patches are fixes and should ideally be queued up/picked up
>> by stable. The last 4 patches add support for BCM7216 which is one of
>> our latest devices supported by this driver.
>>
>> Patch #2 does a few things, but it was pretty badly broken before and it
>> is hard not to fix all call sites (probe, suspend, resume) in one shot.
>>
>> Please let me know if you have any comments.
>>
>> Thanks!
> 
> The entire series looks good to me:
> 
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> 
> Regards,

Thanks Hans, Jens is this good to go from your perspective?
--
Florian

Re: [PATCH 0/8] ata: ahci_brcm: Fixes and new device support

[Jens Axboe]

On 12/25/19 8:34 PM, Florian Fainelli wrote:
> 
> 
> On 12/11/2019 5:31 AM, Hans de Goede wrote:
>> Hi,
>>
>> On 10-12-2019 19:53, Florian Fainelli wrote:
>>> Hi Jens,
>>>
>>> The first 4 patches are fixes and should ideally be queued up/picked up
>>> by stable. The last 4 patches add support for BCM7216 which is one of
>>> our latest devices supported by this driver.
>>>
>>> Patch #2 does a few things, but it was pretty badly broken before and it
>>> is hard not to fix all call sites (probe, suspend, resume) in one shot.
>>>
>>> Please let me know if you have any comments.
>>>
>>> Thanks!
>>
>> The entire series looks good to me:
>>
>> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
>>
>> Regards,
> 
> Thanks Hans, Jens is this good to go from your perspective?

I'll queue 1-4 up for 5.5 and mark for stable, then add 5-8 for
5.6. Thanks!

-- 
Jens Axboe

Re: [PATCH 0/8] ata: ahci_brcm: Fixes and new device support

[Florian Fainelli]

On 12/25/19 7:46 PM, Jens Axboe wrote:
> On 12/25/19 8:34 PM, Florian Fainelli wrote:
>>
>>
>> On 12/11/2019 5:31 AM, Hans de Goede wrote:
>>> Hi,
>>>
>>> On 10-12-2019 19:53, Florian Fainelli wrote:
>>>> Hi Jens,
>>>>
>>>> The first 4 patches are fixes and should ideally be queued up/picked up
>>>> by stable. The last 4 patches add support for BCM7216 which is one of
>>>> our latest devices supported by this driver.
>>>>
>>>> Patch #2 does a few things, but it was pretty badly broken before and it
>>>> is hard not to fix all call sites (probe, suspend, resume) in one shot.
>>>>
>>>> Please let me know if you have any comments.
>>>>
>>>> Thanks!
>>>
>>> The entire series looks good to me:
>>>
>>> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
>>>
>>> Regards,
>>
>> Thanks Hans, Jens is this good to go from your perspective?
> 
> I'll queue 1-4 up for 5.5 and mark for stable, then add 5-8 for
> 5.6. Thanks!

It looks like I will have two incremental changes on top to minimize the
number of resources that get cycled through during EPROBE_DEFER and also
ensure that the 7216 reset line gets properly managed with a call to
reset_control_reset() per review feedback from the reset controller
maintainer.
-- 
Florian

Re: [PATCH 0/8] ata: ahci_brcm: Fixes and new device support

[Naresh Kamboju]

On Wed, 11 Dec 2019 at 00:25, Florian Fainelli <f.fainelli@gmail.com> wrote:
>
> Hi Jens,
>
> The first 4 patches are fixes and should ideally be queued up/picked up
> by stable. The last 4 patches add support for BCM7216 which is one of
> our latest devices supported by this driver.
>
> Patch #2 does a few things, but it was pretty badly broken before and it
> is hard not to fix all call sites (probe, suspend, resume) in one shot.
>
> Please let me know if you have any comments.
>
> Thanks!
>
> Florian Fainelli (8):
>   ata: libahci_platform: Export again ahci_platform_<en/dis>able_phys()
>   ata: ahci_brcm: Fix AHCI resources management

Following error on stable-rc 4.14 and 4.9 branch for arm build.

 drivers/ata/ahci_brcm.c: In function 'brcm_ahci_probe':
 drivers/ata/ahci_brcm.c:412:28: error: 'struct brcm_ahci_priv' has no
member named 'rcdev'; did you mean 'dev'?
   if (!IS_ERR_OR_NULL(priv->rcdev))
                             ^~~~~
                             dev
   CC      fs/pnode.o
   CC      block/genhd.o
 drivers/ata/ahci_brcm.c:413:3: error: implicit declaration of
function 'reset_control_assert'; did you mean 'ahci_reset_controller'?
[-Werror=implicit-function-declaration]
    reset_control_assert(priv->rcdev);
    ^~~~~~~~~~~~~~~~~~~~
    ahci_reset_controller
 drivers/ata/ahci_brcm.c:413:30: error: 'struct brcm_ahci_priv' has no
member named 'rcdev'; did you mean 'dev'?
    reset_control_assert(priv->rcdev);
                               ^~~~~
                               dev
 cc1: some warnings being treated as errors

Full build log links,
https://ci.linaro.org/view/lkft/job/openembedded-lkft-linux-stable-rc-4.14/DISTRO=lkft,MACHINE=am57xx-evm,label=docker-lkft/702/consoleText
https://ci.linaro.org/view/lkft/job/openembedded-lkft-linux-stable-rc-4.9/DISTRO=lkft,MACHINE=am57xx-evm,label=docker-lkft/773/consoleText


-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 0/8] ata: ahci_brcm: Fixes and new device support

[Naresh Kamboju]

On Tue, 7 Jan 2020 at 22:17, Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
>
> On Wed, 11 Dec 2019 at 00:25, Florian Fainelli <f.fainelli@gmail.com> wrote:
> >
> > Hi Jens,
> >
> > The first 4 patches are fixes and should ideally be queued up/picked up
> > by stable. The last 4 patches add support for BCM7216 which is one of
> > our latest devices supported by this driver.
> >
> > Patch #2 does a few things, but it was pretty badly broken before and it
> > is hard not to fix all call sites (probe, suspend, resume) in one shot.
> >
> > Please let me know if you have any comments.
> >
> > Thanks!
> >
> > Florian Fainelli (8):
> >   ata: libahci_platform: Export again ahci_platform_<en/dis>able_phys()
> >   ata: ahci_brcm: Fix AHCI resources management
>
> Following error on stable-rc 4.14 and 4.9 branch for arm build.

Following error on stable-rc 4.19, 4.14 and 4.9 branch for arm build.

>
>  drivers/ata/ahci_brcm.c: In function 'brcm_ahci_probe':
>  drivers/ata/ahci_brcm.c:412:28: error: 'struct brcm_ahci_priv' has no
> member named 'rcdev'; did you mean 'dev'?
>    if (!IS_ERR_OR_NULL(priv->rcdev))
>                              ^~~~~
>                              dev
>    CC      fs/pnode.o
>    CC      block/genhd.o
>  drivers/ata/ahci_brcm.c:413:3: error: implicit declaration of
> function 'reset_control_assert'; did you mean 'ahci_reset_controller'?
> [-Werror=implicit-function-declaration]
>     reset_control_assert(priv->rcdev);
>     ^~~~~~~~~~~~~~~~~~~~
>     ahci_reset_controller
>  drivers/ata/ahci_brcm.c:413:30: error: 'struct brcm_ahci_priv' has no
> member named 'rcdev'; did you mean 'dev'?
>     reset_control_assert(priv->rcdev);
>                                ^~~~~
>                                dev
>  cc1: some warnings being treated as errors
>
> Full build log links,
> https://ci.linaro.org/view/lkft/job/openembedded-lkft-linux-stable-rc-4.14/DISTRO=lkft,MACHINE=am57xx-evm,label=docker-lkft/702/consoleText
> https://ci.linaro.org/view/lkft/job/openembedded-lkft-linux-stable-rc-4.9/DISTRO=lkft,MACHINE=am57xx-evm,label=docker-lkft/773/consoleText
https://ci.linaro.org/view/lkft/job/openembedded-lkft-linux-stable-rc-4.19/DISTRO=lkft,MACHINE=am57xx-evm,label=docker-lkft/404/consoleText
>
>
> --
> Linaro LKFT
> https://lkft.linaro.org

Re: [PATCH 0/8] ata: ahci_brcm: Fixes and new device support

[Florian Fainelli]

On 1/7/20 9:29 AM, Naresh Kamboju wrote:
> On Tue, 7 Jan 2020 at 22:17, Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
>>
>> On Wed, 11 Dec 2019 at 00:25, Florian Fainelli <f.fainelli@gmail.com> wrote:
>>>
>>> Hi Jens,
>>>
>>> The first 4 patches are fixes and should ideally be queued up/picked up
>>> by stable. The last 4 patches add support for BCM7216 which is one of
>>> our latest devices supported by this driver.
>>>
>>> Patch #2 does a few things, but it was pretty badly broken before and it
>>> is hard not to fix all call sites (probe, suspend, resume) in one shot.
>>>
>>> Please let me know if you have any comments.
>>>
>>> Thanks!
>>>
>>> Florian Fainelli (8):
>>>   ata: libahci_platform: Export again ahci_platform_<en/dis>able_phys()
>>>   ata: ahci_brcm: Fix AHCI resources management
>>
>> Following error on stable-rc 4.14 and 4.9 branch for arm build.
> 
> Following error on stable-rc 4.19, 4.14 and 4.9 branch for arm build.
> 
>>
>>  drivers/ata/ahci_brcm.c: In function 'brcm_ahci_probe':
>>  drivers/ata/ahci_brcm.c:412:28: error: 'struct brcm_ahci_priv' has no
>> member named 'rcdev'; did you mean 'dev'?
>>    if (!IS_ERR_OR_NULL(priv->rcdev))
>>                              ^~~~~
>>                              dev
>>    CC      fs/pnode.o
>>    CC      block/genhd.o
>>  drivers/ata/ahci_brcm.c:413:3: error: implicit declaration of
>> function 'reset_control_assert'; did you mean 'ahci_reset_controller'?
>> [-Werror=implicit-function-declaration]
>>     reset_control_assert(priv->rcdev);
>>     ^~~~~~~~~~~~~~~~~~~~
>>     ahci_reset_controller
>>  drivers/ata/ahci_brcm.c:413:30: error: 'struct brcm_ahci_priv' has no
>> member named 'rcdev'; did you mean 'dev'?
>>     reset_control_assert(priv->rcdev);
>>                                ^~~~~
>>                                dev
>>  cc1: some warnings being treated as errors
>>
>> Full build log links,
>> https://ci.linaro.org/view/lkft/job/openembedded-lkft-linux-stable-rc-4.14/DISTRO=lkft,MACHINE=am57xx-evm,label=docker-lkft/702/consoleText
>> https://ci.linaro.org/view/lkft/job/openembedded-lkft-linux-stable-rc-4.9/DISTRO=lkft,MACHINE=am57xx-evm,label=docker-lkft/773/consoleText
> https://ci.linaro.org/view/lkft/job/openembedded-lkft-linux-stable-rc-4.19/DISTRO=lkft,MACHINE=am57xx-evm,label=docker-lkft/404/consoleText

The reset controller support was added in
2b2c47d9e1fe90311b725125d6252a859ee87a79 ("ata: ahci_brcm: Allow
optional reset controller to be used") which was include in v4.20 and
newer so that explains the build failure.

You may want to cherry pick that change into the respective stable
branches and then back port the fixes if that is not too much trouble.
If that does not work or is impractical, please let me know and I can
provide directed backport changes for 4.9, 4.14 and 4.19.

Thank you
-- 
Florian

Re: [PATCH 0/8] ata: ahci_brcm: Fixes and new device support

[Greg Kroah-Hartman]

On Tue, Jan 07, 2020 at 09:39:58AM -0800, Florian Fainelli wrote:
> On 1/7/20 9:29 AM, Naresh Kamboju wrote:
> > On Tue, 7 Jan 2020 at 22:17, Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
> >>
> >> On Wed, 11 Dec 2019 at 00:25, Florian Fainelli <f.fainelli@gmail.com> wrote:
> >>>
> >>> Hi Jens,
> >>>
> >>> The first 4 patches are fixes and should ideally be queued up/picked up
> >>> by stable. The last 4 patches add support for BCM7216 which is one of
> >>> our latest devices supported by this driver.
> >>>
> >>> Patch #2 does a few things, but it was pretty badly broken before and it
> >>> is hard not to fix all call sites (probe, suspend, resume) in one shot.
> >>>
> >>> Please let me know if you have any comments.
> >>>
> >>> Thanks!
> >>>
> >>> Florian Fainelli (8):
> >>>   ata: libahci_platform: Export again ahci_platform_<en/dis>able_phys()
> >>>   ata: ahci_brcm: Fix AHCI resources management
> >>
> >> Following error on stable-rc 4.14 and 4.9 branch for arm build.
> > 
> > Following error on stable-rc 4.19, 4.14 and 4.9 branch for arm build.
> > 
> >>
> >>  drivers/ata/ahci_brcm.c: In function 'brcm_ahci_probe':
> >>  drivers/ata/ahci_brcm.c:412:28: error: 'struct brcm_ahci_priv' has no
> >> member named 'rcdev'; did you mean 'dev'?
> >>    if (!IS_ERR_OR_NULL(priv->rcdev))
> >>                              ^~~~~
> >>                              dev
> >>    CC      fs/pnode.o
> >>    CC      block/genhd.o
> >>  drivers/ata/ahci_brcm.c:413:3: error: implicit declaration of
> >> function 'reset_control_assert'; did you mean 'ahci_reset_controller'?
> >> [-Werror=implicit-function-declaration]
> >>     reset_control_assert(priv->rcdev);
> >>     ^~~~~~~~~~~~~~~~~~~~
> >>     ahci_reset_controller
> >>  drivers/ata/ahci_brcm.c:413:30: error: 'struct brcm_ahci_priv' has no
> >> member named 'rcdev'; did you mean 'dev'?
> >>     reset_control_assert(priv->rcdev);
> >>                                ^~~~~
> >>                                dev
> >>  cc1: some warnings being treated as errors
> >>
> >> Full build log links,
> >> https://ci.linaro.org/view/lkft/job/openembedded-lkft-linux-stable-rc-4.14/DISTRO=lkft,MACHINE=am57xx-evm,label=docker-lkft/702/consoleText
> >> https://ci.linaro.org/view/lkft/job/openembedded-lkft-linux-stable-rc-4.9/DISTRO=lkft,MACHINE=am57xx-evm,label=docker-lkft/773/consoleText
> > https://ci.linaro.org/view/lkft/job/openembedded-lkft-linux-stable-rc-4.19/DISTRO=lkft,MACHINE=am57xx-evm,label=docker-lkft/404/consoleText
> 
> The reset controller support was added in
> 2b2c47d9e1fe90311b725125d6252a859ee87a79 ("ata: ahci_brcm: Allow
> optional reset controller to be used") which was include in v4.20 and
> newer so that explains the build failure.
> 
> You may want to cherry pick that change into the respective stable
> branches and then back port the fixes if that is not too much trouble.
> If that does not work or is impractical, please let me know and I can
> provide directed backport changes for 4.9, 4.14 and 4.19.

No need, I'll just queue up the other needed patch now, thanks.

greg k-h