* [PATCH] docs: admin-guide: kernel-parameters: Document earlycon options for i.MX UARTs
@ 2020-02-29 13:27 Jonathan Neuschäfer
2020-03-02 19:51 ` Jonathan Corbet
0 siblings, 1 reply; 2+ messages in thread
From: Jonathan Neuschäfer @ 2020-02-29 13:27 UTC (permalink / raw)
To: linux-doc
Cc: NXP Linux Team, Jonathan Neuschäfer, Jonathan Corbet,
Thomas Gleixner, Mauro Carvalho Chehab, Josh Poimboeuf,
Andrew Morton, Pawan Gupta, Juergen Gross, linux-kernel
drivers/tty/serial/imx.c implements these earlycon options.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
---
Documentation/admin-guide/kernel-parameters.txt | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 47cd55e339a5..d118ee5721b7 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1095,6 +1095,12 @@
A valid base address must be provided, and the serial
port must already be setup and configured.
+ ec_imx21,<addr>
+ ec_imx6q,<addr>
+ Start an early, polled-mode, output-only console on the
+ Freescale i.MX UART at the specified address. The UART
+ must already be setup and configured.
+
ar3700_uart,<addr>
Start an early, polled-mode console on the
Armada 3700 serial port at the specified
--
2.20.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] docs: admin-guide: kernel-parameters: Document earlycon options for i.MX UARTs
2020-02-29 13:27 [PATCH] docs: admin-guide: kernel-parameters: Document earlycon options for i.MX UARTs Jonathan Neuschäfer
@ 2020-03-02 19:51 ` Jonathan Corbet
0 siblings, 0 replies; 2+ messages in thread
From: Jonathan Corbet @ 2020-03-02 19:51 UTC (permalink / raw)
To: Jonathan Neuschäfer
Cc: linux-doc, NXP Linux Team, Thomas Gleixner,
Mauro Carvalho Chehab, Josh Poimboeuf, Andrew Morton,
Pawan Gupta, Juergen Gross, linux-kernel
On Sat, 29 Feb 2020 14:27:48 +0100
Jonathan Neuschäfer <j.neuschaefer@gmx.net> wrote:
> drivers/tty/serial/imx.c implements these earlycon options.
>
> Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
> ---
> Documentation/admin-guide/kernel-parameters.txt | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index 47cd55e339a5..d118ee5721b7 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -1095,6 +1095,12 @@
> A valid base address must be provided, and the serial
> port must already be setup and configured.
>
> + ec_imx21,<addr>
> + ec_imx6q,<addr>
> + Start an early, polled-mode, output-only console on the
> + Freescale i.MX UART at the specified address. The UART
> + must already be setup and configured.
> +
> ar3700_uart,<addr>
> Start an early, polled-mode console on the
> Armada 3700 serial port at the specified
Applied, thanks.
jon
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-03-02 19:51 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-29 13:27 [PATCH] docs: admin-guide: kernel-parameters: Document earlycon options for i.MX UARTs Jonathan Neuschäfer
2020-03-02 19:51 ` Jonathan Corbet
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).