* [v5,15/16] driver/edac: enable Hygon support to AMD64 EDAC driver
@ 2018-09-05 13:03 Pu Wen
0 siblings, 0 replies; 3+ messages in thread
From: Pu Wen @ 2018-09-05 13:03 UTC (permalink / raw)
To: Borislav Petkov
Cc: tglx, mingo, hpa, x86, thomas.lendacky, pbonzini, mchehab,
mikhail.jin, linux-kernel, linux-arch, linux-edac
On 2018/9/5 18:44, Borislav Petkov wrote:
> Subject should be:
>
> EDAC, amd64: Add Hygon Dhyana support
Thanks for the correction.
>> + case 0x18:
>> + fam_type = &family_types[HYGON_F18_CPUS];
>> + pvt->ops = &family_types[HYGON_F18_CPUS].ops;
>> + break;
>> +
>
> You can use the F17_CPUS array element here and overwrite the ->ctl_name
> string only. No need to define [HYGON_F18_CPUS] above... yet.
All right, the way reusing F17_CPUS will also minimize the code
modification.
>> +#define PCI_DEVICE_ID_HYGON_18H_DF_F0 0x1460
>> +#define PCI_DEVICE_ID_HYGON_18H_DF_F6 0x1466
>
> As in the previous patch - use the AMD defines.
Will remove them in next version of patches.
^ permalink raw reply [flat|nested] 3+ messages in thread
* [v5,15/16] driver/edac: enable Hygon support to AMD64 EDAC driver
@ 2018-09-05 10:44 Borislav Petkov
0 siblings, 0 replies; 3+ messages in thread
From: Borislav Petkov @ 2018-09-05 10:44 UTC (permalink / raw)
To: Pu Wen
Cc: tglx, mingo, hpa, x86, thomas.lendacky, pbonzini, mchehab,
mikhail.jin, linux-kernel, linux-arch, linux-edac
Subject should be:
EDAC, amd64: Add Hygon Dhyana support
On Wed, Aug 29, 2018 at 08:45:45PM +0800, Pu Wen wrote:
> To make AMD64 EDAC and MCE drivers working on Hygon platforms, add
> support for Hygon by using the code path of AMD family 0x17.
>
> As Hygon will negotiate with AMD to make sure that only Hygon will
> use family 0x18, under this consideration try to minimize code
> modifications and share most codes with AMD.
>
> Also Hygon PCI Device ID DF_F0/DF_F6(0x1460/0x1466) of Host bridges
> is needed for edac driver.
>
> Signed-off-by: Pu Wen <puwen@hygon.cn>
> ---
> drivers/edac/amd64_edac.c | 20 +++++++++++++++++++-
> drivers/edac/amd64_edac.h | 4 ++++
> drivers/edac/mce_amd.c | 4 +++-
> 3 files changed, 26 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
> index 18aeabb..d8b4b0e 100644
> --- a/drivers/edac/amd64_edac.c
> +++ b/drivers/edac/amd64_edac.c
> @@ -211,7 +211,7 @@ static int __set_scrub_rate(struct amd64_pvt *pvt, u32 new_bw, u32 min_rate)
>
> scrubval = scrubrates[i].scrubval;
>
> - if (pvt->fam == 0x17) {
> + if (pvt->fam == 0x17 || pvt->fam == 0x18) {
> __f17h_set_scrubval(pvt, scrubval);
> } else if (pvt->fam == 0x15 && pvt->model == 0x60) {
> f15h_select_dct(pvt, 0);
> @@ -264,6 +264,7 @@ static int get_scrub_rate(struct mem_ctl_info *mci)
> break;
>
> case 0x17:
> + case 0x18:
> amd64_read_pci_cfg(pvt->F6, F17H_SCR_BASE_ADDR, &scrubval);
> if (scrubval & BIT(0)) {
> amd64_read_pci_cfg(pvt->F6, F17H_SCR_LIMIT_ADDR, &scrubval);
> @@ -1044,6 +1045,7 @@ static void determine_memory_type(struct amd64_pvt *pvt)
> goto ddr3;
>
> case 0x17:
> + case 0x18:
> if ((pvt->umc[0].dimm_cfg | pvt->umc[1].dimm_cfg) & BIT(5))
> pvt->dram_type = MEM_LRDDR4;
> else if ((pvt->umc[0].dimm_cfg | pvt->umc[1].dimm_cfg) & BIT(4))
> @@ -2200,6 +2202,16 @@ static struct amd64_family_type family_types[] = {
> .dbam_to_cs = f17_base_addr_to_cs_size,
> }
> },
> + [HYGON_F18_CPUS] = {
> + /* Hygon F18h uses the same AMD F17h support */
> + .ctl_name = "Hygon_F18h",
> + .f0_id = PCI_DEVICE_ID_HYGON_18H_DF_F0,
> + .f6_id = PCI_DEVICE_ID_HYGON_18H_DF_F6,
> + .ops = {
> + .early_channel_count = f17_early_channel_count,
> + .dbam_to_cs = f17_base_addr_to_cs_size,
> + }
> + },
> };
>
> /*
> @@ -3192,6 +3204,11 @@ static struct amd64_family_type *per_family_init(struct amd64_pvt *pvt)
> pvt->ops = &family_types[F17_CPUS].ops;
> break;
>
> + case 0x18:
> + fam_type = &family_types[HYGON_F18_CPUS];
> + pvt->ops = &family_types[HYGON_F18_CPUS].ops;
> + break;
> +
You can use the F17_CPUS array element here and overwrite the ->ctl_name
string only. No need to define [HYGON_F18_CPUS] above... yet.
> default:
> amd64_err("Unsupported family!\n");
> return NULL;
> @@ -3428,6 +3445,7 @@ static const struct x86_cpu_id amd64_cpuids[] = {
> { X86_VENDOR_AMD, 0x15, X86_MODEL_ANY, X86_FEATURE_ANY, 0 },
> { X86_VENDOR_AMD, 0x16, X86_MODEL_ANY, X86_FEATURE_ANY, 0 },
> { X86_VENDOR_AMD, 0x17, X86_MODEL_ANY, X86_FEATURE_ANY, 0 },
> + { X86_VENDOR_HYGON, 0x18, X86_MODEL_ANY, X86_FEATURE_ANY, 0 },
> { }
> };
> MODULE_DEVICE_TABLE(x86cpu, amd64_cpuids);
> diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
> index 1d4b74e..6e5f609 100644
> --- a/drivers/edac/amd64_edac.h
> +++ b/drivers/edac/amd64_edac.h
> @@ -116,6 +116,9 @@
> #define PCI_DEVICE_ID_AMD_17H_DF_F0 0x1460
> #define PCI_DEVICE_ID_AMD_17H_DF_F6 0x1466
>
> +#define PCI_DEVICE_ID_HYGON_18H_DF_F0 0x1460
> +#define PCI_DEVICE_ID_HYGON_18H_DF_F6 0x1466
As in the previous patch - use the AMD defines.
^ permalink raw reply [flat|nested] 3+ messages in thread
* [v5,15/16] driver/edac: enable Hygon support to AMD64 EDAC driver
@ 2018-08-29 12:45 Pu Wen
0 siblings, 0 replies; 3+ messages in thread
From: Pu Wen @ 2018-08-29 12:45 UTC (permalink / raw)
To: tglx, mingo, hpa, x86, thomas.lendacky, bp, pbonzini, mchehab,
mikhail.jin
Cc: linux-kernel, linux-arch, linux-edac, Pu Wen
To make AMD64 EDAC and MCE drivers working on Hygon platforms, add
support for Hygon by using the code path of AMD family 0x17.
As Hygon will negotiate with AMD to make sure that only Hygon will
use family 0x18, under this consideration try to minimize code
modifications and share most codes with AMD.
Also Hygon PCI Device ID DF_F0/DF_F6(0x1460/0x1466) of Host bridges
is needed for edac driver.
Signed-off-by: Pu Wen <puwen@hygon.cn>
---
drivers/edac/amd64_edac.c | 20 +++++++++++++++++++-
drivers/edac/amd64_edac.h | 4 ++++
drivers/edac/mce_amd.c | 4 +++-
3 files changed, 26 insertions(+), 2 deletions(-)
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 18aeabb..d8b4b0e 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -211,7 +211,7 @@ static int __set_scrub_rate(struct amd64_pvt *pvt, u32 new_bw, u32 min_rate)
scrubval = scrubrates[i].scrubval;
- if (pvt->fam == 0x17) {
+ if (pvt->fam == 0x17 || pvt->fam == 0x18) {
__f17h_set_scrubval(pvt, scrubval);
} else if (pvt->fam == 0x15 && pvt->model == 0x60) {
f15h_select_dct(pvt, 0);
@@ -264,6 +264,7 @@ static int get_scrub_rate(struct mem_ctl_info *mci)
break;
case 0x17:
+ case 0x18:
amd64_read_pci_cfg(pvt->F6, F17H_SCR_BASE_ADDR, &scrubval);
if (scrubval & BIT(0)) {
amd64_read_pci_cfg(pvt->F6, F17H_SCR_LIMIT_ADDR, &scrubval);
@@ -1044,6 +1045,7 @@ static void determine_memory_type(struct amd64_pvt *pvt)
goto ddr3;
case 0x17:
+ case 0x18:
if ((pvt->umc[0].dimm_cfg | pvt->umc[1].dimm_cfg) & BIT(5))
pvt->dram_type = MEM_LRDDR4;
else if ((pvt->umc[0].dimm_cfg | pvt->umc[1].dimm_cfg) & BIT(4))
@@ -2200,6 +2202,16 @@ static struct amd64_family_type family_types[] = {
.dbam_to_cs = f17_base_addr_to_cs_size,
}
},
+ [HYGON_F18_CPUS] = {
+ /* Hygon F18h uses the same AMD F17h support */
+ .ctl_name = "Hygon_F18h",
+ .f0_id = PCI_DEVICE_ID_HYGON_18H_DF_F0,
+ .f6_id = PCI_DEVICE_ID_HYGON_18H_DF_F6,
+ .ops = {
+ .early_channel_count = f17_early_channel_count,
+ .dbam_to_cs = f17_base_addr_to_cs_size,
+ }
+ },
};
/*
@@ -3192,6 +3204,11 @@ static struct amd64_family_type *per_family_init(struct amd64_pvt *pvt)
pvt->ops = &family_types[F17_CPUS].ops;
break;
+ case 0x18:
+ fam_type = &family_types[HYGON_F18_CPUS];
+ pvt->ops = &family_types[HYGON_F18_CPUS].ops;
+ break;
+
default:
amd64_err("Unsupported family!\n");
return NULL;
@@ -3428,6 +3445,7 @@ static const struct x86_cpu_id amd64_cpuids[] = {
{ X86_VENDOR_AMD, 0x15, X86_MODEL_ANY, X86_FEATURE_ANY, 0 },
{ X86_VENDOR_AMD, 0x16, X86_MODEL_ANY, X86_FEATURE_ANY, 0 },
{ X86_VENDOR_AMD, 0x17, X86_MODEL_ANY, X86_FEATURE_ANY, 0 },
+ { X86_VENDOR_HYGON, 0x18, X86_MODEL_ANY, X86_FEATURE_ANY, 0 },
{ }
};
MODULE_DEVICE_TABLE(x86cpu, amd64_cpuids);
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index 1d4b74e..6e5f609 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -116,6 +116,9 @@
#define PCI_DEVICE_ID_AMD_17H_DF_F0 0x1460
#define PCI_DEVICE_ID_AMD_17H_DF_F6 0x1466
+#define PCI_DEVICE_ID_HYGON_18H_DF_F0 0x1460
+#define PCI_DEVICE_ID_HYGON_18H_DF_F6 0x1466
+
/*
* Function 1 - Address Map
*/
@@ -281,6 +284,7 @@ enum amd_families {
F16_CPUS,
F16_M30H_CPUS,
F17_CPUS,
+ HYGON_F18_CPUS,
NUM_FAMILIES,
};
diff --git a/drivers/edac/mce_amd.c b/drivers/edac/mce_amd.c
index 2ab4d61..c605089 100644
--- a/drivers/edac/mce_amd.c
+++ b/drivers/edac/mce_amd.c
@@ -1059,7 +1059,8 @@ static int __init mce_amd_init(void)
{
struct cpuinfo_x86 *c = &boot_cpu_data;
- if (c->x86_vendor != X86_VENDOR_AMD)
+ if (c->x86_vendor != X86_VENDOR_AMD &&
+ c->x86_vendor != X86_VENDOR_HYGON)
return -ENODEV;
fam_ops = kzalloc(sizeof(struct amd_decoder_ops), GFP_KERNEL);
@@ -1113,6 +1114,7 @@ static int __init mce_amd_init(void)
break;
case 0x17:
+ case 0x18:
xec_mask = 0x3f;
if (!boot_cpu_has(X86_FEATURE_SMCA)) {
printk(KERN_WARNING "Decoding supported only on Scalable MCA processors.\n");
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-09-05 13:03 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-09-05 13:03 [v5,15/16] driver/edac: enable Hygon support to AMD64 EDAC driver Pu Wen
-- strict thread matches above, loose matches on Subject: below --
2018-09-05 10:44 Borislav Petkov
2018-08-29 12:45 Pu Wen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).