[PATCH v7 0/2] Amazon's Annapurna Labs POS Driver

[PATCH v7 0/2] Amazon's Annapurna Labs POS Driver

[Talel Shenhar]

Amazon's Annapurna Labs SoCs include a Point of Serialization error logging
unit that reports an error when a write error occurs (e.g. attempt to write
to a read only register).This error shall be reported via the EDAC
subsystem as uncorrectable-error.

This patch series introduces the support for this unit.

Changes since v6:
=================
- reworked the commit message for the driver patch
- dt-bindings: added -only to  GPL-2.0
- fixed filename in MAINTAINERS
- added driver managed unwind

Changes since v5:
=================
- added missing include to dt binding

Changes since v4:
================
- fixed dt binding according to new dt scheme
- added back the use of _relaxed accessors

Changes since v3:
=================
- ported to be edac device
- converted dt-bindings to new scheme
- added unit address to dt example

Changes since v2:
=================
- squashed left shifting fix to the driver

Changes since v1:
=================
- move MODULE_ to the end of the file
- simplified resource remapping devm_platform_ioremap_resource()
- use platform_get_irq() instead of irq_of_parse_and_map()
- removed the use of _relaxed accessor in favor to the regular ones
- removed driver selected based on arch
- added casting to u64 before left shifting (reported by kbuild test robot)


Talel Shenhar (2):
  dt-bindings: soc: al-pos: Amazon's Annapurna Labs POS
  soc: amazon: al-pos-edac: Introduce Amazon's Annapurna Labs POS EDAC
    driver

 .../bindings/edac/amazon,al-pos-edac.yaml          |  41 +++++
 MAINTAINERS                                        |   7 +
 drivers/edac/Kconfig                               |   6 +
 drivers/edac/Makefile                              |   1 +
 drivers/edac/al_pos_edac.c                         | 174 +++++++++++++++++++++
 5 files changed, 229 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/edac/amazon,al-pos-edac.yaml
 create mode 100644 drivers/edac/al_pos_edac.c

-- 
2.7.4

[PATCH v7 1/2] dt-bindings: soc: al-pos: Amazon's Annapurna Labs POS

[Talel Shenhar]

Document Amazon's Annapurna Labs POS SoC binding.

Signed-off-by: Talel Shenhar <talel@amazon.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/edac/amazon,al-pos-edac.yaml          | 41 ++++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/edac/amazon,al-pos-edac.yaml

diff --git a/Documentation/devicetree/bindings/edac/amazon,al-pos-edac.yaml b/Documentation/devicetree/bindings/edac/amazon,al-pos-edac.yaml
new file mode 100644
index 00000000..54afa43
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/amazon,al-pos-edac.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/edac/amazon,al-pos-edac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amazon's Annapurna Labs POS
+
+maintainers:
+  - Talel Shenhar <talel@amazon.com>
+  - Talel Shenhar <talelshenhar@gmail.com>
+
+description: |
+  POS node is defined to describe the Point Of Serialization (POS) error
+  detection capability.
+
+properties:
+
+  compatible:
+    const: "amazon,al-pos-edac"
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Interrupt for the error event.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    edac@f0070084 {
+      compatible = "amazon,al-pos-edac";
+      reg = <0x0 0xf0070084 0x0 0x00000008>;
+      interrupt-parent = <&amazon_system_fabric>;
+      interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+    };
-- 
2.7.4

[PATCH v7 2/2] soc: amazon: al-pos-edac: Introduce Amazon's Annapurna Labs POS EDAC driver

[Talel Shenhar]

Amazon's Annapurna Labs SoCs include a Point of Serialization error logging
unit that reports an error when a write error occurs (e.g. attempt to
write to a read only register).
This error shall be reported via the EDAC subsystem as uncorrectable-error.

Signed-off-by: Talel Shenhar <talel@amazon.com>
Reviewed-by: James Morse <james.morse@arm.com>
---
 MAINTAINERS                |   7 ++
 drivers/edac/Kconfig       |   6 ++
 drivers/edac/Makefile      |   1 +
 drivers/edac/al_pos_edac.c | 174 +++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 188 insertions(+)
 create mode 100644 drivers/edac/al_pos_edac.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 55199ef..30b39bd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -757,6 +757,13 @@ F:	drivers/tty/serial/altera_jtaguart.c
 F:	include/linux/altera_uart.h
 F:	include/linux/altera_jtaguart.h
 
+AMAZON ANNAPURNA LABS POS EDAC DRIVER
+M:	Talel Shenhar <talel@amazon.com>
+M:	Talel Shenhar <talelshenhar@gmail.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/edac/amazon,al-pos-edac.yaml
+F:	drivers/edac/al_pos_edac.c
+
 AMAZON ANNAPURNA LABS THERMAL MMIO DRIVER
 M:	Talel Shenhar <talel@amazon.com>
 S:	Maintained
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 417dad6..bad1c09 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -100,6 +100,12 @@ config EDAC_AMD64_ERROR_INJECTION
 	  In addition, there are two control files, inject_read and inject_write,
 	  which trigger the DRAM ECC Read and Write respectively.
 
+config EDAC_AL_POS
+	tristate "Amazon's Annapurna Labs POS EDAC driver"
+	depends on (ARCH_ALPINE || COMPILE_TEST)
+	help
+	  Include support for the SoC POS EDAC error capability.
+
 config EDAC_AMD76X
 	tristate "AMD 76x (760, 762, 768)"
 	depends on PCI && X86_32
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index d77200c..7f6d958 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_EDAC_GHES)			+= ghes_edac.o
 edac_mce_amd-y				:= mce_amd.o
 obj-$(CONFIG_EDAC_DECODE_MCE)		+= edac_mce_amd.o
 
+obj-$(CONFIG_EDAC_AL_POS)		+= al_pos_edac.o
 obj-$(CONFIG_EDAC_AMD76X)		+= amd76x_edac.o
 obj-$(CONFIG_EDAC_CPC925)		+= cpc925_edac.o
 obj-$(CONFIG_EDAC_I5000)		+= i5000_edac.o
diff --git a/drivers/edac/al_pos_edac.c b/drivers/edac/al_pos_edac.c
new file mode 100644
index 00000000..8124e05
--- /dev/null
+++ b/drivers/edac/al_pos_edac.c
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ */
+#include <linux/bitfield.h>
+#include <linux/edac.h>
+#include <linux/of_irq.h>
+#include "edac_module.h"
+
+#define DRV_NAME "al_pos_edac"
+#define AL_POS_EDAC_MSG_MAX 256
+
+/* Registers Offset */
+#define AL_POS_ERROR_LOG_1	0x0
+#define AL_POS_ERROR_LOG_0	0x4
+
+/* Registers Fields */
+#define AL_POS_ERROR_LOG_1_VALID	BIT(31)
+#define AL_POS_ERROR_LOG_1_BRESP	GENMASK(18, 17)
+#define AL_POS_ERROR_LOG_1_REQUEST_ID	GENMASK(16, 8)
+#define AL_POS_ERROR_LOG_1_ADDR_HIGH	GENMASK(7, 0)
+
+#define AL_POS_ERROR_LOG_0_ADDR_LOW	GENMASK(31, 0)
+
+struct al_pos_edac {
+	struct edac_device_ctl_info *edac_dev;
+	void __iomem *mmio_base;
+	int irq;
+};
+
+static int al_pos_handle(struct al_pos_edac *al_pos)
+{
+	u32 log0, log1;
+	u64 addr;
+	u16 request_id;
+	u8 bresp;
+	char msg[AL_POS_EDAC_MSG_MAX];
+
+	log1 = readl_relaxed(al_pos->mmio_base + AL_POS_ERROR_LOG_1);
+	if (!FIELD_GET(AL_POS_ERROR_LOG_1_VALID, log1))
+		return 0;
+
+	log0 = readl_relaxed(al_pos->mmio_base + AL_POS_ERROR_LOG_0);
+	writel_relaxed(0, al_pos->mmio_base + AL_POS_ERROR_LOG_1);
+
+	addr = FIELD_GET(AL_POS_ERROR_LOG_0_ADDR_LOW, log0);
+	addr |= (((u64)FIELD_GET(AL_POS_ERROR_LOG_1_ADDR_HIGH, log1)) << 32);
+	request_id = FIELD_GET(AL_POS_ERROR_LOG_1_REQUEST_ID, log1);
+	bresp = FIELD_GET(AL_POS_ERROR_LOG_1_BRESP, log1);
+
+	snprintf(msg, sizeof(msg),
+		 "addr=0x%llx request_id=0x%x bresp=0x%x\n",
+		 addr, request_id, bresp);
+
+	edac_device_handle_ue(al_pos->edac_dev, 0, 0, msg);
+
+	return 1;
+}
+
+static void al_pos_edac_check(struct edac_device_ctl_info *edac_dev)
+{
+	struct al_pos_edac *al_pos = edac_dev->pvt_info;
+
+	al_pos_handle(al_pos);
+}
+
+static irqreturn_t al_pos_irq_handler(int irq, void *info)
+{
+	struct platform_device *pdev = info;
+	struct al_pos_edac *al_pos = platform_get_drvdata(pdev);
+
+	if (al_pos_handle(al_pos))
+		return IRQ_HANDLED;
+	return IRQ_NONE;
+}
+
+static void devm_al_pos_edac_free(void *data)
+{
+	edac_device_free_ctl_info(data);
+}
+
+static void devm_al_pos_edac_del(void *data)
+{
+	edac_device_del_device(data);
+}
+
+static int al_pos_probe(struct platform_device *pdev)
+{
+	struct edac_device_ctl_info *edac_dev;
+	struct al_pos_edac *al_pos;
+	int ret;
+
+	edac_dev = edac_device_alloc_ctl_info(sizeof(*al_pos), DRV_NAME, 1,
+					      DRV_NAME, 1, 0, NULL, 0,
+					      edac_device_alloc_index());
+	if (!edac_dev)
+		return -ENOMEM;
+
+	ret = devm_add_action(&pdev->dev, devm_al_pos_edac_free, edac_dev);
+	if (ret) {
+		edac_device_free_ctl_info(edac_dev);
+		return ret;
+	}
+
+	al_pos = edac_dev->pvt_info;
+	al_pos->edac_dev = edac_dev;
+	platform_set_drvdata(pdev, al_pos);
+
+	al_pos->mmio_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(al_pos->mmio_base)) {
+		dev_err(&pdev->dev, "failed to ioremap memory (%ld)\n",
+			PTR_ERR(al_pos->mmio_base));
+		return PTR_ERR(al_pos->mmio_base);
+	}
+
+	al_pos->irq = platform_get_irq(pdev, 0);
+	if (al_pos->irq <= 0)
+		edac_dev->edac_check = al_pos_edac_check;
+
+	edac_dev->dev = &pdev->dev;
+	edac_dev->mod_name = DRV_NAME;
+	edac_dev->dev_name = dev_name(&pdev->dev);
+	edac_dev->ctl_name = "AL_POS";
+
+	ret = edac_device_add_device(edac_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to add edac device\n");
+		return ret;
+	}
+
+	ret = devm_add_action(&pdev->dev, devm_al_pos_edac_del, edac_dev->dev);
+	if (ret) {
+		edac_device_del_device(edac_dev->dev);
+		return ret;
+	}
+
+	if (al_pos->irq > 0) {
+		ret = devm_request_irq(&pdev->dev,
+				       al_pos->irq,
+				       al_pos_irq_handler,
+				       0,
+				       pdev->name,
+				       pdev);
+		if (ret != 0) {
+			dev_err(&pdev->dev,
+				"failed to register to irq %d (%d)\n",
+				al_pos->irq, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct of_device_id al_pos_of_match[] = {
+	{ .compatible = "amazon,al-pos-edac", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, al_pos_of_match);
+
+static struct platform_driver al_pos_driver = {
+	.probe = al_pos_probe,
+	.driver = {
+		.name = DRV_NAME,
+		.of_match_table = al_pos_of_match,
+	},
+};
+
+module_platform_driver(al_pos_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Talel Shenhar");
+MODULE_DESCRIPTION("Amazon's Annapurna Labs POS driver");
-- 
2.7.4