Linux-EDAC Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v7 2/2] EDAC: add EDAC driver for DMC520
@ 2019-11-18  2:17 Shiping Ji
  0 siblings, 0 replies; only message in thread
From: Shiping Ji @ 2019-11-18  2:17 UTC (permalink / raw)
  To: bp, james.morse, robh+dt, mark.rutland
  Cc: devicetree, linux-kernel, mchehab, linux-edac, sashal, hangl,
	lewan, ruizhao, scott.branden, yuqing.shen, ray.jui, wangglei,
	shji

New driver supports error detection and correction on the devices with ARM
DMC-520 memory controller.

Signed-off-by: Lei Wang <leiwang_git@outlook.com>
Reviewed-by: James Morse <james.morse@arm.com>

---
     Changes in v7:
         - Applied patch from Borislav Petkov.
         - Added arm prefix to the interrupt-config property since it's not standard one
         - Fixed edac_local variable usage due to variable length array

---
 MAINTAINERS                |   6 +
 drivers/edac/Kconfig       |   7 +
 drivers/edac/Makefile      |   1 +
 drivers/edac/dmc520_edac.c | 653 +++++++++++++++++++++++++++++++++++++
 4 files changed, 667 insertions(+)
 create mode 100644 drivers/edac/dmc520_edac.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 296de2b51c83..2c5f453895f3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5864,6 +5864,12 @@ F:	Documentation/driver-api/edac.rst
 F:	drivers/edac/
 F:	include/linux/edac.h
 
+EDAC-DMC520
+M:	Lei Wang <lewan@microsoft.com>
+L:	linux-edac@vger.kernel.org
+S:	Supported
+F:	drivers/edac/dmc520_edac.c
+
 EDAC-E752X
 M:	Mark Gross <mark.gross@intel.com>
 L:	linux-edac@vger.kernel.org
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 417dad635526..aa7f6d52c49e 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -524,4 +524,11 @@ config EDAC_BLUEFIELD
 	  Support for error detection and correction on the
 	  Mellanox BlueField SoCs.
 
+config EDAC_DMC520
+	tristate "ARM DMC-520 ECC"
+	depends on ARM64
+	help
+	  Support for error detection and correction on the
+	  SoCs with ARM DMC-520 DRAM controller.
+
 endif # EDAC
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index d77200c9680b..269e15118cea 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -87,3 +87,4 @@ obj-$(CONFIG_EDAC_TI)			+= ti_edac.o
 obj-$(CONFIG_EDAC_QCOM)			+= qcom_edac.o
 obj-$(CONFIG_EDAC_ASPEED)		+= aspeed_edac.o
 obj-$(CONFIG_EDAC_BLUEFIELD)		+= bluefield_edac.o
+obj-$(CONFIG_EDAC_DMC520)		+= dmc520_edac.o
diff --git a/drivers/edac/dmc520_edac.c b/drivers/edac/dmc520_edac.c
new file mode 100644
index 000000000000..b84b4ec98536
--- /dev/null
+++ b/drivers/edac/dmc520_edac.c
@@ -0,0 +1,653 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * EDAC driver for DMC-520 memory controller.
+ *
+ * The driver currently supports up to 2 interrupt lines.
+ * More interrupt lines support can be added by:
+ * 1. Adding more DECLARE_ISR(index) macros, and dmc520_isr_x fields
+ *    into dmc520_isr_array.
+ * 2. In dmc520_edac_dram_all_isr, adding condition statements
+ *    to match interrupt flags for these newly added interrupt
+ *    lines.
+ * 3. Implementing isr's for the new interrupt lines.
+ *
+ * Authors:	Rui Zhao <ruizhao@microsoft.com>
+ *		Lei Wang <lewan@microsoft.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/edac.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include "edac_mc.h"
+
+/* DMC-520 registers */
+#define REG_OFFSET_FEATURE_CONFIG		0x130
+#define REG_OFFSET_ECC_ERRC_COUNT_31_00		0x158
+#define REG_OFFSET_ECC_ERRC_COUNT_63_32		0x15C
+#define REG_OFFSET_ECC_ERRD_COUNT_31_00		0x160
+#define REG_OFFSET_ECC_ERRD_COUNT_63_32		0x164
+#define REG_OFFSET_INTERRUPT_CONTROL		0x500
+#define REG_OFFSET_INTERRUPT_CLR		0x508
+#define REG_OFFSET_INTERRUPT_STATUS		0x510
+#define REG_OFFSET_DRAM_ECC_ERRC_INT_INFO_31_00	0x528
+#define REG_OFFSET_DRAM_ECC_ERRC_INT_INFO_63_32	0x52C
+#define REG_OFFSET_DRAM_ECC_ERRD_INT_INFO_31_00	0x530
+#define REG_OFFSET_DRAM_ECC_ERRD_INT_INFO_63_32	0x534
+#define REG_OFFSET_ADDRESS_CONTROL_NOW		0x1010
+#define REG_OFFSET_MEMORY_TYPE_NOW		0x1128
+#define REG_OFFSET_SCRUB_CONTROL0_NOW		0x1170
+#define REG_OFFSET_FORMAT_CONTROL		0x18
+
+/* DMC-520 types, masks and bitfields */
+#define DRAM_ECC_INT_CE_BIT			BIT(2)
+#define DRAM_ECC_INT_UE_BIT			BIT(3)
+#define ALL_INT_MASK				GENMASK(9, 0)
+#define MEMORY_WIDTH_MASK			GENMASK(1, 0)
+#define SCRUB_TRIGGER0_NEXT_MASK		GENMASK(1, 0)
+#define REG_FIELD_DRAM_ECC_ENABLED		GENMASK(1, 0)
+#define REG_FIELD_MEMORY_TYPE			GENMASK(2, 0)
+#define REG_FIELD_DEVICE_WIDTH			GENMASK(9, 8)
+#define REG_FIELD_ADDRESS_CONTROL_COL		GENMASK(2, 0)
+#define REG_FIELD_ADDRESS_CONTROL_ROW		GENMASK(10, 8)
+#define REG_FIELD_ADDRESS_CONTROL_BANK		GENMASK(18, 16)
+#define REG_FIELD_ADDRESS_CONTROL_RANK		GENMASK(25, 24)
+#define REG_FIELD_ERR_INFO_LOW_VALID		BIT(0)
+#define REG_FIELD_ERR_INFO_LOW_COL		GENMASK(10, 1)
+#define REG_FIELD_ERR_INFO_LOW_ROW		GENMASK(28, 11)
+#define REG_FIELD_ERR_INFO_LOW_RANK		GENMASK(31, 29)
+#define REG_FIELD_ERR_INFO_HIGH_BANK		GENMASK(3, 0)
+#define REG_FIELD_ERR_INFO_HIGH_VALID		BIT(31)
+
+#define DRAM_ADDRESS_CONTROL_MIN_COL_BITS	8
+#define DRAM_ADDRESS_CONTROL_MIN_ROW_BITS	11
+
+#define DMC520_SCRUB_TRIGGER_ERR_DETECT		2
+#define DMC520_SCRUB_TRIGGER_IDLE		3
+
+/* Driver settings */
+/*
+ * The max-length message would be: "rank:7 bank:15 row:262143 col:1023".
+ * Max length is 34. Using a 40-size buffer is enough.
+ */
+#define DMC520_MSG_BUF_SIZE			40
+#define EDAC_MOD_NAME				"dmc520-edac"
+#define EDAC_CTL_NAME				"dmc520"
+
+/* the data bus width for the attached memory chips. */
+enum dmc520_mem_width {
+	MEM_WIDTH_X32 = 2,
+	MEM_WIDTH_X64 = 3
+};
+
+/* memory type */
+enum dmc520_mem_type {
+	MEM_TYPE_DDR3 = 1,
+	MEM_TYPE_DDR4 = 2
+};
+
+/* memory device width */
+enum dmc520_dev_width {
+	DEV_WIDTH_X4 = 0,
+	DEV_WIDTH_X8 = 1,
+	DEV_WIDTH_X16 = 2
+};
+
+struct ecc_error_info {
+	u32 col;
+	u32 row;
+	u32 bank;
+	u32 rank;
+};
+
+/* The EDAC driver private data */
+struct dmc520_edac {
+	void __iomem *reg_base;
+	u32 nintr;
+	u32 irq_mask_all;
+	spinlock_t ecc_lock;
+	u32 irq_masks[0];
+};
+
+static int dmc520_mc_idx;
+
+static irqreturn_t
+dmc520_edac_dram_all_isr(int irq, struct mem_ctl_info *mci, u32 interrupt_mask);
+
+#define DECLARE_ISR(index) \
+static irqreturn_t dmc520_isr_##index(int irq, void *data) \
+{ \
+	struct mem_ctl_info *mci; \
+	struct dmc520_edac *edac; \
+	mci = data; \
+	edac = mci->pvt_info; \
+	return dmc520_edac_dram_all_isr(irq, mci, edac->irq_masks[index]); \
+}
+
+DECLARE_ISR(0)
+DECLARE_ISR(1)
+
+irq_handler_t dmc520_isr_array[] = {
+	dmc520_isr_0,
+	dmc520_isr_1
+};
+
+static u32 dmc520_read_reg(struct dmc520_edac *edac, u32 offset)
+{
+	return readl(edac->reg_base + offset);
+}
+
+static void dmc520_write_reg(struct dmc520_edac *edac, u32 val, u32 offset)
+{
+	writel(val, edac->reg_base + offset);
+}
+
+static u32 dmc520_calc_dram_ecc_error(u32 value)
+{
+	u32 total = 0;
+
+	/* Each rank's error counter takes one byte. */
+	while (value > 0) {
+		total += (value & 0xFF);
+		value >>= 8;
+	}
+	return total;
+}
+
+static u32 dmc520_get_dram_ecc_error_count(struct dmc520_edac *edac,
+					   bool is_ce)
+{
+	u32 reg_offset_low, reg_offset_high;
+	u32 err_low, err_high;
+	u32 err_count;
+
+	reg_offset_low = is_ce ? REG_OFFSET_ECC_ERRC_COUNT_31_00 :
+				 REG_OFFSET_ECC_ERRD_COUNT_31_00;
+	reg_offset_high = is_ce ? REG_OFFSET_ECC_ERRC_COUNT_63_32 :
+				  REG_OFFSET_ECC_ERRD_COUNT_63_32;
+
+	err_low = dmc520_read_reg(edac, reg_offset_low);
+	err_high = dmc520_read_reg(edac, reg_offset_high);
+	/* Reset error counters */
+	dmc520_write_reg(edac, 0, reg_offset_low);
+	dmc520_write_reg(edac, 0, reg_offset_high);
+
+	err_count = dmc520_calc_dram_ecc_error(err_low) +
+		   dmc520_calc_dram_ecc_error(err_high);
+
+	return err_count;
+}
+
+static void dmc520_get_dram_ecc_error_info(struct dmc520_edac *edac,
+					   bool is_ce,
+					   struct ecc_error_info *info)
+{
+	u32 reg_offset_low, reg_offset_high;
+	u32 reg_val_low, reg_val_high;
+	bool valid;
+
+	reg_offset_low = is_ce ? REG_OFFSET_DRAM_ECC_ERRC_INT_INFO_31_00 :
+				 REG_OFFSET_DRAM_ECC_ERRD_INT_INFO_31_00;
+	reg_offset_high = is_ce ? REG_OFFSET_DRAM_ECC_ERRC_INT_INFO_63_32 :
+				  REG_OFFSET_DRAM_ECC_ERRD_INT_INFO_63_32;
+
+	reg_val_low = dmc520_read_reg(edac, reg_offset_low);
+	reg_val_high = dmc520_read_reg(edac, reg_offset_high);
+
+	valid = (FIELD_GET(REG_FIELD_ERR_INFO_LOW_VALID, reg_val_low) != 0) &&
+		(FIELD_GET(REG_FIELD_ERR_INFO_HIGH_VALID, reg_val_high) != 0);
+
+	if (valid) {
+		info->col =
+			FIELD_GET(REG_FIELD_ERR_INFO_LOW_COL, reg_val_low);
+		info->row =
+			FIELD_GET(REG_FIELD_ERR_INFO_LOW_ROW, reg_val_low);
+		info->rank =
+			FIELD_GET(REG_FIELD_ERR_INFO_LOW_RANK, reg_val_low);
+		info->bank =
+			FIELD_GET(REG_FIELD_ERR_INFO_HIGH_BANK, reg_val_high);
+	} else {
+		memset(info, 0, sizeof(struct ecc_error_info));
+	}
+}
+
+static bool dmc520_is_ecc_enabled(void __iomem *reg_base)
+{
+	u32 reg_val = readl(reg_base + REG_OFFSET_FEATURE_CONFIG);
+
+	return FIELD_GET(REG_FIELD_DRAM_ECC_ENABLED, reg_val);
+}
+
+static enum scrub_type dmc520_get_scrub_type(struct dmc520_edac *edac)
+{
+	enum scrub_type type = SCRUB_NONE;
+	u32 reg_val, scrub_cfg;
+
+	reg_val = dmc520_read_reg(edac, REG_OFFSET_SCRUB_CONTROL0_NOW);
+	scrub_cfg = FIELD_GET(SCRUB_TRIGGER0_NEXT_MASK, reg_val);
+
+	if (scrub_cfg == DMC520_SCRUB_TRIGGER_ERR_DETECT ||
+	    scrub_cfg == DMC520_SCRUB_TRIGGER_IDLE)
+		type = SCRUB_HW_PROG;
+
+	return type;
+}
+
+/* Get the memory data bus width, in number of bytes. */
+static u32 dmc520_get_memory_width(struct dmc520_edac *edac)
+{
+	enum dmc520_mem_width mem_width_field;
+	static u32 mem_width_in_bytes;
+	u32 reg_val;
+
+	if (mem_width_in_bytes)
+		return mem_width_in_bytes;
+
+	reg_val = dmc520_read_reg(edac, REG_OFFSET_FORMAT_CONTROL);
+	mem_width_field = FIELD_GET(MEMORY_WIDTH_MASK, reg_val);
+
+	if (mem_width_field == MEM_WIDTH_X32)
+		mem_width_in_bytes = 4;
+	else if (mem_width_field == MEM_WIDTH_X64)
+		mem_width_in_bytes = 8;
+	return mem_width_in_bytes;
+}
+
+static enum mem_type dmc520_get_mtype(struct dmc520_edac *edac)
+{
+	enum mem_type mt = MEM_UNKNOWN;
+	enum dmc520_mem_type type;
+	u32 reg_val;
+
+	reg_val = dmc520_read_reg(edac, REG_OFFSET_MEMORY_TYPE_NOW);
+	type = FIELD_GET(REG_FIELD_MEMORY_TYPE, reg_val);
+
+	switch (type) {
+	case MEM_TYPE_DDR3:
+		mt = MEM_DDR3;
+		break;
+
+	case MEM_TYPE_DDR4:
+		mt = MEM_DDR4;
+		break;
+	}
+
+	return mt;
+}
+
+static enum dev_type dmc520_get_dtype(struct dmc520_edac *edac)
+{
+	enum dmc520_dev_width device_width;
+	enum dev_type dt = DEV_UNKNOWN;
+	u32 reg_val;
+
+	reg_val = dmc520_read_reg(edac, REG_OFFSET_MEMORY_TYPE_NOW);
+	device_width = FIELD_GET(REG_FIELD_DEVICE_WIDTH, reg_val);
+
+	switch (device_width) {
+	case DEV_WIDTH_X4:
+		dt = DEV_X4;
+		break;
+
+	case DEV_WIDTH_X8:
+		dt = DEV_X8;
+		break;
+
+	case DEV_WIDTH_X16:
+		dt = DEV_X16;
+		break;
+	}
+
+	return dt;
+}
+
+static u32 dmc520_get_rank_count(void __iomem *reg_base)
+{
+	u32 reg_val, rank_bits;
+
+	reg_val = readl(reg_base + REG_OFFSET_ADDRESS_CONTROL_NOW);
+	rank_bits = FIELD_GET(REG_FIELD_ADDRESS_CONTROL_RANK, reg_val);
+
+	return BIT(rank_bits);
+}
+
+static u64 dmc520_get_rank_size(struct dmc520_edac *edac)
+{
+	u32 reg_val, col_bits, row_bits, bank_bits;
+
+	reg_val = dmc520_read_reg(edac, REG_OFFSET_ADDRESS_CONTROL_NOW);
+
+	col_bits = FIELD_GET(REG_FIELD_ADDRESS_CONTROL_COL, reg_val) +
+		   DRAM_ADDRESS_CONTROL_MIN_COL_BITS;
+	row_bits = FIELD_GET(REG_FIELD_ADDRESS_CONTROL_ROW, reg_val) +
+		   DRAM_ADDRESS_CONTROL_MIN_ROW_BITS;
+	bank_bits = FIELD_GET(REG_FIELD_ADDRESS_CONTROL_BANK, reg_val);
+
+	return (u64)dmc520_get_memory_width(edac) <<
+			(col_bits + row_bits + bank_bits);
+}
+
+static void dmc520_handle_dram_ecc_errors(struct mem_ctl_info *mci,
+					  bool is_ce)
+{
+	char message[DMC520_MSG_BUF_SIZE];
+	struct ecc_error_info info;
+	struct dmc520_edac *edac;
+	u32 cnt;
+
+	edac = mci->pvt_info;
+	dmc520_get_dram_ecc_error_info(edac, is_ce, &info);
+
+	cnt = dmc520_get_dram_ecc_error_count(edac, is_ce);
+	if (!cnt)
+		return;
+
+	snprintf(message, ARRAY_SIZE(message),
+		 "rank:%d bank:%d row:%d col:%d",
+		 info.rank, info.bank,
+		 info.row, info.col);
+
+	spin_lock(&edac->ecc_lock);
+	edac_mc_handle_error((is_ce ? HW_EVENT_ERR_CORRECTED :
+			     HW_EVENT_ERR_UNCORRECTED),
+			     mci, cnt, 0, 0, 0, info.rank, -1, -1,
+			     message, "");
+	spin_unlock(&edac->ecc_lock);
+}
+
+static irqreturn_t dmc520_edac_dram_ecc_isr(int irq, struct mem_ctl_info *mci,
+					    bool is_ce)
+{
+	struct dmc520_edac *edac;
+	u32 i_mask;
+
+	edac = mci->pvt_info;
+
+	i_mask = is_ce ? DRAM_ECC_INT_CE_BIT : DRAM_ECC_INT_UE_BIT;
+
+	dmc520_handle_dram_ecc_errors(mci, is_ce);
+
+	dmc520_write_reg(edac, i_mask, REG_OFFSET_INTERRUPT_CLR);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t dmc520_edac_dram_all_isr(int irq, struct mem_ctl_info *mci,
+					    u32 interrupt_mask)
+{
+	irqreturn_t irq_ret = IRQ_NONE;
+	struct dmc520_edac *edac;
+	u32 status;
+
+	edac = mci->pvt_info;
+
+	status = dmc520_read_reg(edac, REG_OFFSET_INTERRUPT_STATUS);
+
+	if ((interrupt_mask & DRAM_ECC_INT_CE_BIT) &&
+		(status & DRAM_ECC_INT_CE_BIT))
+		irq_ret = dmc520_edac_dram_ecc_isr(irq, mci, true);
+
+	if ((interrupt_mask & DRAM_ECC_INT_UE_BIT) &&
+		(status & DRAM_ECC_INT_UE_BIT))
+		irq_ret = dmc520_edac_dram_ecc_isr(irq, mci, false);
+
+	return irq_ret;
+}
+
+static void dmc520_init_csrow(struct mem_ctl_info *mci)
+{
+	struct dmc520_edac *edac = mci->pvt_info;
+	struct csrow_info *csi;
+	struct dimm_info *dimm;
+	u32 pages_per_rank;
+	enum dev_type dt;
+	enum mem_type mt;
+	int row, ch;
+	u64 rs;
+
+	dt = dmc520_get_dtype(edac);
+	mt = dmc520_get_mtype(edac);
+	rs = dmc520_get_rank_size(edac);
+	pages_per_rank = rs >> PAGE_SHIFT;
+
+	for (row = 0; row < mci->nr_csrows; row++) {
+		csi = mci->csrows[row];
+
+		for (ch = 0; ch < csi->nr_channels; ch++) {
+			dimm		= csi->channels[ch]->dimm;
+			dimm->grain	= dmc520_get_memory_width(edac);
+			dimm->dtype	= dt;
+			dimm->mtype	= mt;
+			dimm->edac_mode	= EDAC_FLAG_SECDED;
+			dimm->nr_pages	= pages_per_rank / csi->nr_channels;
+		}
+	}
+}
+
+static int dmc520_edac_probe(struct platform_device *pdev)
+{
+	int ret, idx, nintr, nintr_registered = 0;
+	struct dmc520_edac *edac, *edac_local;
+	struct mem_ctl_info *mci = NULL;
+	struct edac_mc_layer layers[1];
+	void __iomem *reg_base;
+	u32 reg_val, edac_size;
+	struct resource *res;
+	struct device *dev;
+
+	/* Parse the device node */
+	dev = &pdev->dev;
+
+	nintr = of_property_count_u32_elems(dev->of_node, "arm,interrupt-config");
+	if (nintr <= 0) {
+		edac_printk(KERN_ERR, EDAC_MOD_NAME,
+			    "Invalid device node configuration: At least one interrupt line/config is expected.\n");
+		return -EINVAL;
+	}
+
+	if (nintr > ARRAY_SIZE(dmc520_isr_array)) {
+		edac_printk(KERN_ERR, EDAC_MOD_NAME,
+			    "Invalid device node configuration: # of intr config elements(%d) can not exceed %ld.\n",
+			    nintr, ARRAY_SIZE(dmc520_isr_array));
+		return -EINVAL;
+	}
+
+	/* Initialize dmc520 edac */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	reg_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(reg_base))
+		return PTR_ERR(reg_base);
+
+	if (!dmc520_is_ecc_enabled(reg_base))
+		return -ENXIO;
+
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = dmc520_get_rank_count(reg_base);
+	layers[0].is_virt_csrow = true;
+
+	edac_size = sizeof(struct dmc520_edac) + sizeof(u32) * nintr;
+	edac_local = kmalloc(edac_size, GFP_KERNEL);
+	if (!edac_local)
+		return -ENOMEM;
+	memset(edac_local, 0, edac_size);
+
+	ret = of_property_read_u32_array(dev->of_node, "arm,interrupt-config",
+					 edac_local->irq_masks, nintr);
+	if (ret) {
+		edac_printk(KERN_ERR, EDAC_MOD_NAME,
+			    "Failed to get arm,interrupt-config arrays.\n");
+		goto err;
+	}
+
+	for (idx = 0; idx < nintr; idx++) {
+		if (edac_local->irq_mask_all &
+		    edac_local->irq_masks[idx]) {
+			edac_printk(KERN_ERR, EDAC_MC,
+				    "Interrupt-config error: Element %d's intr mask %d has overlap.\n",
+				    idx, edac_local->irq_masks[idx]);
+			ret = -ENXIO;
+			goto err;
+		}
+
+		edac_local->irq_mask_all |= edac_local->irq_masks[idx];
+	}
+
+	if ((edac_local->irq_mask_all | ALL_INT_MASK) != ALL_INT_MASK) {
+		edac_printk(KERN_WARNING, EDAC_MOD_NAME,
+			    "Interrupt-config warning: Interrupt mask (0x%x) is not supported.(0x%lx).\n",
+			    edac_local->irq_mask_all, ALL_INT_MASK);
+	}
+
+	edac_local->irq_mask_all &= ALL_INT_MASK;
+
+	mci = edac_mc_alloc(dmc520_mc_idx++, ARRAY_SIZE(layers), layers,
+			    edac_size);
+	if (!mci) {
+		edac_printk(KERN_ERR, EDAC_MOD_NAME,
+			    "Failed to allocate memory for mc instance\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	edac = mci->pvt_info;
+	memcpy(edac, edac_local, edac_size);
+	kfree(edac_local);
+	edac_local = NULL;
+
+	edac->reg_base = reg_base;
+	edac->nintr = nintr;
+	spin_lock_init(&edac->ecc_lock);
+
+	platform_set_drvdata(pdev, mci);
+
+	mci->pdev = dev;
+	mci->mtype_cap		= MEM_FLAG_DDR3 | MEM_FLAG_DDR4;
+	mci->edac_ctl_cap	= EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+	mci->edac_cap		= EDAC_FLAG_SECDED;
+	mci->scrub_cap		= SCRUB_FLAG_HW_SRC;
+	mci->scrub_mode		= dmc520_get_scrub_type(edac);
+	mci->ctl_name		= EDAC_CTL_NAME;
+	mci->dev_name		= dev_name(mci->pdev);
+	mci->mod_name		= EDAC_MOD_NAME;
+
+	edac_op_state = EDAC_OPSTATE_INT;
+
+	dmc520_init_csrow(mci);
+
+	/* Clear interrupts, not affecting other unrelated interrupts */
+	reg_val = dmc520_read_reg(edac, REG_OFFSET_INTERRUPT_CONTROL);
+	dmc520_write_reg(edac, reg_val & (~(edac->irq_mask_all)),
+			 REG_OFFSET_INTERRUPT_CONTROL);
+	dmc520_write_reg(edac, edac->irq_mask_all,
+			 REG_OFFSET_INTERRUPT_CLR);
+
+	for (idx = 0; idx < nintr; idx++) {
+		int irq_id = platform_get_irq(pdev, idx);
+
+		if (irq_id < 0) {
+			edac_printk(KERN_ERR, EDAC_MC,
+				    "Failed to get irq #%d\n", idx);
+			ret = -ENODEV;
+			goto err;
+		}
+
+		ret = devm_request_irq(&pdev->dev, irq_id,
+				       dmc520_isr_array[idx], IRQF_SHARED,
+				       dev_name(&pdev->dev), mci);
+		if (ret < 0) {
+			edac_printk(KERN_ERR, EDAC_MC,
+				    "Failed to request irq %d\n", irq_id);
+			goto err;
+		}
+
+		++nintr_registered;
+	}
+
+	/* Reset DRAM CE/UE counters */
+	if (edac->irq_mask_all & DRAM_ECC_INT_CE_BIT)
+		dmc520_get_dram_ecc_error_count(edac, true);
+
+	if (edac->irq_mask_all & DRAM_ECC_INT_UE_BIT)
+		dmc520_get_dram_ecc_error_count(edac, false);
+
+	/* Enable interrupts, not affecting other unrelated interrupts */
+	dmc520_write_reg(edac, reg_val | edac->irq_mask_all,
+			 REG_OFFSET_INTERRUPT_CONTROL);
+
+	ret = edac_mc_add_mc(mci);
+	if (ret) {
+		edac_printk(KERN_ERR, EDAC_MOD_NAME,
+			"Failed to register with EDAC core\n");
+		goto err;
+	}
+
+	return 0;
+
+err:
+	kfree(edac_local);
+	for (idx = 0; idx < nintr_registered; idx++) {
+		int irq_id = platform_get_irq(pdev, idx);
+
+		devm_free_irq(&pdev->dev, irq_id, mci);
+	}
+	if (mci)
+		edac_mc_free(mci);
+
+	return ret;
+}
+
+static int dmc520_edac_remove(struct platform_device *pdev)
+{
+	struct dmc520_edac *edac;
+	struct mem_ctl_info *mci;
+	u32 reg_val, idx;
+
+	mci = platform_get_drvdata(pdev);
+	edac = mci->pvt_info;
+
+	/* Disable interrupts */
+	reg_val = dmc520_read_reg(edac, REG_OFFSET_INTERRUPT_CONTROL);
+	dmc520_write_reg(edac, reg_val & (~(edac->irq_mask_all)),
+			 REG_OFFSET_INTERRUPT_CONTROL);
+
+	/* free irq's */
+	for (idx = 0; idx < edac->nintr; idx++) {
+		int irq_id = platform_get_irq(pdev, idx);
+
+		devm_free_irq(&pdev->dev, irq_id, mci);
+	}
+
+	edac_mc_del_mc(&pdev->dev);
+	edac_mc_free(mci);
+
+	return 0;
+}
+
+static const struct of_device_id dmc520_edac_driver_id[] = {
+	{ .compatible = "arm,dmc-520", },
+	{ /* end of table */ }
+};
+
+MODULE_DEVICE_TABLE(of, dmc520_edac_driver_id);
+
+static struct platform_driver dmc520_edac_driver = {
+	.driver = {
+		.name = "dmc520",
+		.of_match_table = dmc520_edac_driver_id,
+	},
+
+	.probe = dmc520_edac_probe,
+	.remove = dmc520_edac_remove
+};
+
+module_platform_driver(dmc520_edac_driver);
+
+MODULE_AUTHOR("Rui Zhao <ruizhao@microsoft.com>, Lei Wang <lewan@microsoft.com>");
+MODULE_DESCRIPTION("DMC-520 ECC driver");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-18  2:17 [PATCH v7 2/2] EDAC: add EDAC driver for DMC520 Shiping Ji

Linux-EDAC Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-edac/0 linux-edac/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-edac linux-edac/ https://lore.kernel.org/linux-edac \
		linux-edac@vger.kernel.org
	public-inbox-index linux-edac

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-edac


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git