Linux-EFI Archive on lore.kernel.org
 help / color / Atom feed
From: Ard Biesheuvel <ardb@kernel.org>
To: linux-efi@vger.kernel.org
Cc: Ard Biesheuvel <ardb@kernel.org>,
	nivedita@alum.mit.edu, mingo@kernel.org, lukas@wunner.de,
	atish.patra@wdc.com
Subject: [PATCH 04/19] efi/libstub/arm: Relax FDT alignment requirement
Date: Mon, 10 Feb 2020 17:02:33 +0100
Message-ID: <20200210160248.4889-5-ardb@kernel.org> (raw)
In-Reply-To: <20200210160248.4889-1-ardb@kernel.org>

The arm64 kernel no longer requires the FDT blob to fit inside a
naturally aligned 2 MB memory block, so remove the code that aligns
the allocation to 2 MB.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
 arch/arm64/include/asm/efi.h       | 7 -------
 drivers/firmware/efi/libstub/fdt.c | 6 +-----
 2 files changed, 1 insertion(+), 12 deletions(-)

diff --git a/arch/arm64/include/asm/efi.h b/arch/arm64/include/asm/efi.h
index 56ae87401a26..45e821222774 100644
--- a/arch/arm64/include/asm/efi.h
+++ b/arch/arm64/include/asm/efi.h
@@ -57,13 +57,6 @@ efi_status_t __efi_rt_asm_wrapper(void *, const char *, ...);
 
 /* arch specific definitions used by the stub code */
 
-/*
- * AArch64 requires the DTB to be 8-byte aligned in the first 512MiB from
- * start of kernel and may not cross a 2MiB boundary. We set alignment to
- * 2MiB so we know it won't cross a 2MiB boundary.
- */
-#define EFI_FDT_ALIGN	SZ_2M   /* used by allocate_new_fdt_and_exit_boot() */
-
 /*
  * In some configurations (e.g. VMAP_STACK && 64K pages), stacks built into the
  * kernel need greater alignment than we require the segments to be padded to.
diff --git a/drivers/firmware/efi/libstub/fdt.c b/drivers/firmware/efi/libstub/fdt.c
index 0a91e5232127..f71cd54823b7 100644
--- a/drivers/firmware/efi/libstub/fdt.c
+++ b/drivers/firmware/efi/libstub/fdt.c
@@ -199,10 +199,6 @@ static efi_status_t update_fdt_memmap(void *fdt, struct efi_boot_memmap *map)
 	return EFI_SUCCESS;
 }
 
-#ifndef EFI_FDT_ALIGN
-# define EFI_FDT_ALIGN EFI_PAGE_SIZE
-#endif
-
 struct exit_boot_struct {
 	efi_memory_desc_t	*runtime_map;
 	int			*runtime_entry_count;
@@ -281,7 +277,7 @@ efi_status_t allocate_new_fdt_and_exit_boot(void *handle,
 	pr_efi("Exiting boot services and installing virtual address map...\n");
 
 	map.map = &memory_map;
-	status = efi_high_alloc(MAX_FDT_SIZE, EFI_FDT_ALIGN,
+	status = efi_high_alloc(MAX_FDT_SIZE, EFI_PAGE_SIZE,
 				new_fdt_addr, max_addr);
 	if (status != EFI_SUCCESS) {
 		pr_efi_err("Unable to allocate memory for new device tree.\n");
-- 
2.17.1


  parent reply index

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-10 16:02 [PATCH 00/19] EFI stub early spring cleaning part 2 Ard Biesheuvel
2020-02-10 16:02 ` [PATCH 01/19] efi/libstub/x86: Remove pointless zeroing of apm_bios_info Ard Biesheuvel
2020-02-10 16:02 ` [PATCH 02/19] efi/libstub/x86: Avoid overflowing code32_start on PE entry Ard Biesheuvel
2020-02-10 16:02 ` [PATCH 03/19] efi/libstub: Use hidden visiblity for all source files Ard Biesheuvel
2020-02-24 23:15   ` Atish Patra
2020-02-24 23:36     ` Ard Biesheuvel
2020-02-25 19:18       ` Atish Patra
2020-02-10 16:02 ` Ard Biesheuvel [this message]
2020-02-10 16:02 ` [PATCH 05/19] efi/libstub: Move memory map handling and allocation routines to mem.c Ard Biesheuvel
2020-02-10 16:02 ` [PATCH 06/19] efi/libstub: Simplify efi_high_alloc() and rename to efi_allocate_pages() Ard Biesheuvel
2020-02-10 16:02 ` [PATCH 07/19] efi/libstub/x86: Incorporate eboot.c into libstub Ard Biesheuvel
2020-02-10 16:02 ` [PATCH 08/19] efi/libstub: Use consistent type names for file I/O protocols Ard Biesheuvel
2020-02-10 16:02 ` [PATCH 09/19] efi/libstub: Move stub specific declarations into efistub.h Ard Biesheuvel
2020-02-10 16:02 ` [PATCH 10/19] efi/libstub/x86: Permit bootparams struct to be allocated above 4 GB Ard Biesheuvel
2020-02-10 16:02 ` [PATCH 11/19] efi/libstub/x86: Permit cmdline data " Ard Biesheuvel
2020-02-10 16:02 ` [PATCH 12/19] efi/libstub: Move efi_random_alloc() into separate source file Ard Biesheuvel
2020-02-10 16:02 ` [PATCH 13/19] efi/libstub: Move get_dram_base() into arm-stub.c Ard Biesheuvel
2020-02-17  1:17   ` Atish Patra
2020-02-17  8:37     ` Ard Biesheuvel
2020-02-26 23:34       ` Atish Patra
2020-02-27  7:38         ` Ard Biesheuvel
2020-02-27  7:48           ` Atish Patra
2020-02-27  7:50             ` Ard Biesheuvel
2020-02-10 16:02 ` [PATCH 14/19] efi/libstub: Move file I/O support code into separate file Ard Biesheuvel
2020-02-10 16:02 ` [PATCH 15/19] efi/libstub: Rewrite file I/O routine Ard Biesheuvel
2020-02-10 16:02 ` [PATCH 16/19] efi/libstub: Take soft and hard memory limits into account for initrd loading Ard Biesheuvel
2020-02-10 16:02 ` [PATCH 17/19] efi/libstub: Clean up command line parsing routine Ard Biesheuvel
2020-02-10 16:02 ` [PATCH 18/19] efi/libstub: Expose LocateDevicePath boot service Ard Biesheuvel
2020-02-10 16:02 ` [PATCH 19/19] efi/libstub: Make the LoadFile EFI protocol accessible Ard Biesheuvel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200210160248.4889-5-ardb@kernel.org \
    --to=ardb@kernel.org \
    --cc=atish.patra@wdc.com \
    --cc=linux-efi@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=mingo@kernel.org \
    --cc=nivedita@alum.mit.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-EFI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-efi/0 linux-efi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-efi linux-efi/ https://lore.kernel.org/linux-efi \
		linux-efi@vger.kernel.org
	public-inbox-index linux-efi

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-efi


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git