From: Hans de Goede <hdegoede@redhat.com>
To: "Rafael J . Wysocki" <rjw@rjwysocki.net>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Mark Gross <markgross@kernel.org>,
Andy Shevchenko <andy@infradead.org>,
Wolfram Sang <wsa@the-dreams.de>,
Sebastian Reichel <sre@kernel.org>,
MyungJoo Ham <myungjoo.ham@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
Ard Biesheuvel <ardb@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>, Len Brown <lenb@kernel.org>,
linux-acpi@vger.kernel.org, Yauhen Kharuzhy <jekhor@gmail.com>,
Tsuchiya Yuto <kitakar@gmail.com>,
platform-driver-x86@vger.kernel.org, linux-i2c@vger.kernel.org,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-efi@vger.kernel.org
Subject: [PATCH v2 17/20] extcon: intel-cht-wc: Support devs with Micro-B / USB-2 only Type-C connectors
Date: Sun, 14 Nov 2021 18:03:32 +0100 [thread overview]
Message-ID: <20211114170335.66994-18-hdegoede@redhat.com> (raw)
In-Reply-To: <20211114170335.66994-1-hdegoede@redhat.com>
So far the extcon-intel-cht-wc code has only been tested on devices with
a Type-C connector with USB-PD, USB3 (superspeed) and DP-altmode support
through a FUSB302 Type-C controller.
Some devices with the intel-cht-wc PMIC however come with an USB-micro-B
connector, or an USB-2 only Type-C connector without USB-PD.
Which device-model we are running on can be identified with the new
intel_cht_wc_get_model() helper and on models without a Type-C controller
the extcon code must control the Vbus 5V boost converter and the USB role
switch depending on the detected cable-type.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/extcon/Kconfig | 3 +-
drivers/extcon/extcon-intel-cht-wc.c | 91 ++++++++++++++++++++++++++++
2 files changed, 93 insertions(+), 1 deletion(-)
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index c69d40ae5619..fc733689cfad 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -60,7 +60,8 @@ config EXTCON_INTEL_INT3496
config EXTCON_INTEL_CHT_WC
tristate "Intel Cherrytrail Whiskey Cove PMIC extcon driver"
- depends on INTEL_SOC_PMIC_CHTWC
+ depends on INTEL_SOC_PMIC_CHTWC && USB_SUPPORT
+ select USB_ROLE_SWITCH
help
Say Y here to enable extcon support for charger detection / control
on the Intel Cherrytrail Whiskey Cove PMIC.
diff --git a/drivers/extcon/extcon-intel-cht-wc.c b/drivers/extcon/extcon-intel-cht-wc.c
index a5aeeecc44fb..119b83793123 100644
--- a/drivers/extcon/extcon-intel-cht-wc.c
+++ b/drivers/extcon/extcon-intel-cht-wc.c
@@ -16,7 +16,9 @@
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
#include <linux/slab.h>
+#include <linux/usb/role.h>
#include "extcon-intel.h"
@@ -102,8 +104,11 @@ struct cht_wc_extcon_data {
struct device *dev;
struct regmap *regmap;
struct extcon_dev *edev;
+ struct usb_role_switch *role_sw;
+ struct regulator *vbus_boost;
unsigned int previous_cable;
bool usb_host;
+ bool vbus_boost_enabled;
};
static int cht_wc_extcon_get_id(struct cht_wc_extcon_data *ext, int pwrsrc_sts)
@@ -217,6 +222,18 @@ static void cht_wc_extcon_set_otgmode(struct cht_wc_extcon_data *ext,
CHT_WC_CHGRCTRL1_OTGMODE, val);
if (ret)
dev_err(ext->dev, "Error updating CHGRCTRL1 reg: %d\n", ret);
+
+ if (ext->vbus_boost && ext->vbus_boost_enabled != enable) {
+ if (enable)
+ ret = regulator_enable(ext->vbus_boost);
+ else
+ ret = regulator_disable(ext->vbus_boost);
+
+ if (ret == 0)
+ ext->vbus_boost_enabled = enable;
+ else
+ dev_err(ext->dev, "Error updating Vbus boost regulator: %d\n", ret);
+ }
}
static void cht_wc_extcon_enable_charging(struct cht_wc_extcon_data *ext,
@@ -246,6 +263,7 @@ static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext)
unsigned int cable = EXTCON_NONE;
/* Ignore errors in host mode, as the 5v boost converter is on then */
bool ignore_get_charger_errors = ext->usb_host;
+ enum usb_role role;
ret = regmap_read(ext->regmap, CHT_WC_PWRSRC_STS, &pwrsrc_sts);
if (ret) {
@@ -289,6 +307,18 @@ static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext)
ext->usb_host = ((id == INTEL_USB_ID_GND) || (id == INTEL_USB_RID_A));
extcon_set_state_sync(ext->edev, EXTCON_USB_HOST, ext->usb_host);
+
+ if (ext->usb_host)
+ role = USB_ROLE_HOST;
+ else if (pwrsrc_sts & CHT_WC_PWRSRC_VBUS)
+ role = USB_ROLE_DEVICE;
+ else
+ role = USB_ROLE_NONE;
+
+ /* Note: this is a no-op when ext->role_sw is NULL */
+ ret = usb_role_switch_set_role(ext->role_sw, role);
+ if (ret)
+ dev_err(ext->dev, "Error setting USB-role: %d\n", ret);
}
static irqreturn_t cht_wc_extcon_isr(int irq, void *data)
@@ -334,6 +364,61 @@ static int cht_wc_extcon_sw_control(struct cht_wc_extcon_data *ext, bool enable)
return ret;
}
+static int cht_wc_extcon_find_role_sw(struct cht_wc_extcon_data *ext)
+{
+ const struct software_node *swnode;
+ struct fwnode_handle *fwnode;
+
+ swnode = software_node_find_by_name(NULL, "intel-xhci-usb-sw");
+ if (!swnode)
+ return -EPROBE_DEFER;
+
+ fwnode = software_node_fwnode(swnode);
+ ext->role_sw = usb_role_switch_find_by_fwnode(fwnode);
+ fwnode_handle_put(fwnode);
+
+ return ext->role_sw ? 0 : -EPROBE_DEFER;
+}
+
+static void cht_wc_extcon_put_role_sw(void *data)
+{
+ struct cht_wc_extcon_data *ext = data;
+
+ usb_role_switch_put(ext->role_sw);
+}
+
+/* Some boards require controlling the role-sw and vbus based on the id-pin */
+static int cht_wc_extcon_get_role_sw_and_regulator(struct cht_wc_extcon_data *ext)
+{
+ int ret;
+
+ ret = cht_wc_extcon_find_role_sw(ext);
+ if (ret)
+ return ret;
+
+ ret = devm_add_action_or_reset(ext->dev, cht_wc_extcon_put_role_sw, ext);
+ if (ret)
+ return ret;
+
+ /*
+ * On x86/ACPI platforms the regulator <-> consumer link is provided
+ * by platform_data passed to the regulator driver. This means that
+ * this info is not available before the regulator driver has bound.
+ * Use devm_regulator_get_optional() to avoid getting a dummy
+ * regulator and wait for the regulator to show up if necessary.
+ */
+ ext->vbus_boost = devm_regulator_get_optional(ext->dev, "vbus");
+ if (IS_ERR(ext->vbus_boost)) {
+ ret = PTR_ERR(ext->vbus_boost);
+ if (ret == -ENODEV)
+ ret = -EPROBE_DEFER;
+
+ return dev_err_probe(ext->dev, ret, "getting vbus regulator");
+ }
+
+ return 0;
+}
+
static int cht_wc_extcon_probe(struct platform_device *pdev)
{
struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
@@ -376,6 +461,12 @@ static int cht_wc_extcon_probe(struct platform_device *pdev)
*/
cht_wc_extcon_set_5v_boost(ext, false);
break;
+ case INTEL_CHT_WC_LENOVO_YOGABOOK1:
+ case INTEL_CHT_WC_XIAOMI_MIPAD2:
+ ret = cht_wc_extcon_get_role_sw_and_regulator(ext);
+ if (ret)
+ return ret;
+ break;
default:
break;
}
--
2.31.1
next prev parent reply other threads:[~2021-11-14 17:11 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-14 17:03 [PATCH v2 00/20] power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook Hans de Goede
2021-11-14 17:03 ` [PATCH v2 01/20] power: supply: core: Refactor power_supply_set_input_current_limit_from_supplier() Hans de Goede
2021-11-14 17:03 ` [PATCH v2 02/20] power: supply: bq25890: Fix ADC continuous conversion setting when charging Hans de Goede
2021-11-14 17:03 ` [PATCH v2 03/20] power: supply: bq25890: Rename IILIM field to IINLIM Hans de Goede
2021-11-14 17:03 ` [PATCH v2 04/20] power: supply: bq25890: Reduce reported CONSTANT_CHARGE_CURRENT_MAX for low temperatures Hans de Goede
2021-11-16 9:43 ` Hans de Goede
2021-11-14 17:03 ` [PATCH v2 05/20] power: supply: bq25890: Add a bq25890_rw_init_data() helper Hans de Goede
2021-11-14 17:03 ` [PATCH v2 06/20] power: supply: bq25890: Add support to skip reset at probe() / remove() Hans de Goede
2021-11-14 17:03 ` [PATCH v2 07/20] power: supply: bq25890: Add support to read back the settings from the chip Hans de Goede
2021-11-14 17:03 ` [PATCH v2 08/20] power: supply: bq25890: Enable charging on boards where we skip reset Hans de Goede
2021-11-14 17:03 ` [PATCH v2 09/20] power: supply: bq25890: Drop dev->platform_data == NULL check Hans de Goede
2021-11-16 11:02 ` Andy Shevchenko
2021-11-14 17:03 ` [PATCH v2 10/20] power: supply: bq25890: Add bq25890_set_otg_cfg() helper Hans de Goede
2021-11-15 10:11 ` Yauhen Kharuzhy
2021-11-16 9:33 ` Hans de Goede
[not found] ` <CAKWEGV7WVsZK=890UG=t3dhqCuoD-6N44DPMzk-_8TSPBm4_Dg@mail.gmail.com>
2021-11-28 15:02 ` Hans de Goede
2021-11-28 19:46 ` Yauhen Kharuzhy
2021-11-14 17:03 ` [PATCH v2 11/20] power: supply: bq25890: Add support for registering the Vbus boost converter as a regulator Hans de Goede
2021-11-16 11:05 ` Andy Shevchenko
2021-11-14 17:03 ` [PATCH v2 12/20] power: supply: bq25890: On the bq25892 set the IINLIM based on external charger detection Hans de Goede
2021-11-14 17:03 ` [PATCH v2 13/20] power: supply: bq25890: Support higher charging voltages through Pump Express+ protocol Hans de Goede
2021-11-16 11:14 ` Andy Shevchenko
2021-11-16 11:40 ` Hans de Goede
2021-11-14 17:03 ` [PATCH v2 14/20] mfd: intel_soc_pmic_chtwc: Add intel_cht_wc_get_model() helper function Hans de Goede
2021-11-16 11:18 ` Andy Shevchenko
2021-11-16 11:43 ` Hans de Goede
2021-11-28 9:53 ` Hans de Goede
2021-11-14 17:03 ` [PATCH v2 15/20] i2c: cht-wc: Make charger i2c-client instantiation board/device-model specific Hans de Goede
2021-11-16 11:20 ` Andy Shevchenko
2021-11-16 11:44 ` Hans de Goede
2021-11-23 8:24 ` Wolfram Sang
2021-11-28 14:04 ` Hans de Goede
2021-11-14 17:03 ` [PATCH v2 16/20] extcon: intel-cht-wc: Use new intel_cht_wc_get_model() helper Hans de Goede
2021-11-17 6:47 ` Chanwoo Choi
2021-11-17 22:28 ` Hans de Goede
2021-11-14 17:03 ` Hans de Goede [this message]
2021-11-16 11:28 ` [PATCH v2 17/20] extcon: intel-cht-wc: Support devs with Micro-B / USB-2 only Type-C connectors Andy Shevchenko
2021-11-16 11:31 ` Andy Shevchenko
2021-11-16 11:32 ` Andy Shevchenko
2021-11-16 11:51 ` Hans de Goede
2021-11-14 17:03 ` [PATCH v2 18/20] extcon: intel-cht-wc: Refactor cht_wc_extcon_get_charger() Hans de Goede
2021-11-17 7:15 ` Chanwoo Choi
2021-11-17 22:30 ` Hans de Goede
2021-11-19 15:44 ` Chanwoo Choi
2021-11-28 14:17 ` Hans de Goede
2021-11-14 17:03 ` [PATCH v2 19/20] extcon: intel-cht-wc: Add support for registering a power_supply class-device Hans de Goede
2021-11-16 15:19 ` Andy Shevchenko
2021-11-14 17:03 ` [PATCH v2 20/20] extcon: intel-cht-wc: Report RID_A for ACA adapters Hans de Goede
2021-11-16 11:00 ` [PATCH v2 00/20] power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook Andy Shevchenko
2021-11-16 11:05 ` Hans de Goede
2021-11-17 18:56 ` Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211114170335.66994-18-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=andy@infradead.org \
--cc=ardb@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=jekhor@gmail.com \
--cc=kitakar@gmail.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-efi@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=markgross@kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=myungjoo.ham@samsung.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=rjw@rjwysocki.net \
--cc=sre@kernel.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).