* Re: [PATCH v5] fstests: transport two ext4 tests from LTP
[not found] ` <20200103100319.GB893866@desktop>
@ 2020-01-03 10:05 ` Eryu Guan
0 siblings, 0 replies; only message in thread
From: Eryu Guan @ 2020-01-03 10:05 UTC (permalink / raw)
To: Yong Sun; +Cc: fstests, darrick.wong, Yong Sun, linux-ext4
[cc ext4 list for the corruption issue at the end of the mail.]
On Fri, Jan 03, 2020 at 06:03:27PM +0800, Eryu Guan wrote:
> On Fri, Dec 13, 2019 at 05:39:37PM +0800, Yong Sun wrote:
> > Recently LTP upstream removed some ext4 tests[1].
> > And two of them is still valid to keep. So I transport those two tests here.
> > ext4-nsec-timestamps, which is used to test nanosec timestamps of ext4, rewrite into ext4/043 and 044.
> > ext4-subdir-limit, which is used to test subdirectory limit of ext4, rewrite into ext4/045.
> >
> > [1] https://marc.info/?l=linux-fsdevel&m=157190623919681&w=2
> >
> > Signed-off-by: Sun Yong <yosun@suse.com>
> > ---
> > v2: Correct copyright information
> > v3: Correct white-space damage
> > v4: Add a missing file
> > v5: Fix several issue reviewed by Darrick
> > ---
> > src/Makefile | 3 +-
> > src/t_create_long_dirs.c | 139 +++++++++++++++++++++++++++++++++++++
> > src/t_create_short_dirs.c | 142 ++++++++++++++++++++++++++++++++++++++
> > src/t_ext4_file_time.c | 53 ++++++++++++++
>
> Need .gitignore entries for new binaries.
>
> And I think t_ext4_file_time is generic enough, we could rename it to
> something like t_get_file_time.
>
> > tests/ext4/043 | 56 +++++++++++++++
> > tests/ext4/043.out | 2 +
> > tests/ext4/044 | 87 +++++++++++++++++++++++
> > tests/ext4/044.out | 2 +
> > tests/ext4/045 | 134 +++++++++++++++++++++++++++++++++++
> > tests/ext4/045.out | 2 +
> > tests/ext4/group | 3 +
> > 11 files changed, 622 insertions(+), 1 deletion(-)
> > create mode 100644 src/t_create_long_dirs.c
> > create mode 100644 src/t_create_short_dirs.c
> > create mode 100644 src/t_ext4_file_time.c
> > create mode 100755 tests/ext4/043
> > create mode 100644 tests/ext4/043.out
> > create mode 100755 tests/ext4/044
> > create mode 100644 tests/ext4/044.out
> > create mode 100755 tests/ext4/045
> > create mode 100644 tests/ext4/045.out
> >
> > diff --git a/src/Makefile b/src/Makefile
> > index ce6d8610..387293d1 100644
> > --- a/src/Makefile
> > +++ b/src/Makefile
> > @@ -16,7 +16,8 @@ TARGETS = dirstress fill fill2 getpagesize holes lstat64 \
> > holetest t_truncate_self t_mmap_dio af_unix t_mmap_stale_pmd \
> > t_mmap_cow_race t_mmap_fallocate fsync-err t_mmap_write_ro \
> > t_ext4_dax_journal_corruption t_ext4_dax_inline_corruption \
> > - t_ofd_locks t_locks_execve t_mmap_collision mmap-write-concurrent
> > + t_ofd_locks t_locks_execve t_mmap_collision mmap-write-concurrent \
> > + t_ext4_file_time t_create_short_dirs t_create_long_dirs
>
> Use tab for indention.
>
> >
> > LINUX_TARGETS = xfsctl bstat t_mtab getdevicesize preallo_rw_pattern_reader \
> > preallo_rw_pattern_writer ftrunc trunc fs_perms testx looptest \
> > diff --git a/src/t_create_long_dirs.c b/src/t_create_long_dirs.c
> > new file mode 100644
> > index 00000000..fe5b4b64
> > --- /dev/null
> > +++ b/src/t_create_long_dirs.c
> > @@ -0,0 +1,139 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright (c) 2009 FUJITSU LIMITED
> > + * Author: Li Zefan <lizf@cn.fujitsu.com>
> > + */
> > +
> > +#define _POSIX_C_SOURCE 200809L
> > +#include <unistd.h>
> > +#include <stdlib.h>
> > +#include <stdio.h>
> > +#include <stdlib.h>
> > +#include <time.h>
> > +#include <fcntl.h>
> > +#include <sys/types.h>
> > +#include <sys/stat.h>
> > +#include "config.h"
> > +
> > +/* NCHARS = 10 + 26 + 26 = 62 */
> > +#define NAME_LEN 255
> > +#define NCHARS 62
> > +#define MAX_LEN1 62
> > +#define MAX_LEN2 (62 * 62)
> > +#define MAX_LEN3 (62 * 62 * 62)
> > +
> > +/* valid characters for the directory name */
> > +char chars[NCHARS + 1] = "0123456789qwertyuiopasdfghjklzxcvbnmQWERTYUIOPASDFGHJKLZXCVBNM";
> > +
> > +/* to store the generated directory name */
> > +char name[NAME_LEN + 1];
> > +int names;
> > +int parent_fd;
> > +
> > +/*
> > + * init_name - initialize the directory name
> > + *
> > + * Generate a randomized directory name, and then we generate more
> > + * directory names based on it.
> > + */
> > +void init_name(void)
> > +{
> > + int i;
> > +
> > + srand(time(NULL));
> > +
> > + for (i = 0; i < NAME_LEN; i++)
> > + name[i] = chars[rand() % 62];
> > +}
> > +
> > +void create_dir(void)
> > +{
> > + if (mkdirat(parent_fd, name, S_IRWXU)) {
> > + perror("mkdir");
> > + exit(1);
> > + }
> > +}
> > +
> > +/*
> > + * create_dirs - create @names directory names
> > + * @n: how many names to be created
> > + *
> > + * if n <= 62, we need to modify 1 char of the name
> > + * if n <= 62*62, we need to modify 2 chars
> > + * if n <= 62*62*62, we need to modify 3 chars
> > + */
> > +void create_dirs(int n)
> > +{
> > + int i, j, k;
> > + int depth;
> > +
> > + if (n <= MAX_LEN1)
> > + depth = 1;
> > + else if (n <= MAX_LEN2)
> > + depth = 2;
> > + else
> > + depth = 3;
> > +
> > + for (i = 0; i < NCHARS; i++) {
> > + name[0] = chars[i];
> > + if (depth == 1) {
> > + create_dir();
> > + if (--n == 0)
> > + return;
> > + continue;
> > + }
> > +
> > + for (j = 0; j < NCHARS; j++) {
> > + name[1] = chars[j];
> > + if (depth == 2) {
> > + create_dir();
> > + if (--n == 0)
> > + return;
> > + continue;
> > + }
> > +
> > + for (k = 0; k < NCHARS; k++) {
> > + name[2] = chars[k];
> > + create_dir();
> > + if (--n == 0)
> > + return;
> > + }
> > + }
> > + }
> > +}
> > +
> > +void usage()
> > +{
> > + fprintf(stderr, "Usage: create_long_dirs nr_dirs parent_dir\n");
> > +}
> > +
> > +/*
> > + * Create long-name directories
> > + * @argv[1]: directory number
> > + * @argv[2]: parent directory
> > + */
> > +int main(int argc, char *argv[])
> > +{
> > + if (argc != 3) {
> > + usage();
> > + return 1;
> > + }
> > +
> > + names = atoi(argv[1]);
> > + if (names > MAX_LEN3 || names <= 0) {
> > + usage();
> > + return 1;
> > + }
> > +
> > + parent_fd = open(argv[2], O_RDONLY);
> > + if (parent_fd == -1) {
> > + perror("open parent dir failed");
> > + return 1;
> > + }
> > +
> > + init_name();
> > +
> > + create_dirs(names);
> > +
> > + return 0;
> > +}
> > diff --git a/src/t_create_short_dirs.c b/src/t_create_short_dirs.c
> > new file mode 100644
> > index 00000000..778506e1
> > --- /dev/null
> > +++ b/src/t_create_short_dirs.c
> > @@ -0,0 +1,142 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright (c) 2009 FUJITSU LIMITED
> > + * Author: Li Zefan <lizf@cn.fujitsu.com>
> > + */
> > +
> > +#define _POSIX_C_SOURCE 200809L
> > +#include <unistd.h>
> > +#include <stdlib.h>
> > +#include <stdio.h>
> > +#include <errno.h>
> > +#include <fcntl.h>
> > +#include <sys/stat.h>
> > +#include <sys/types.h>
> > +#include "config.h"
> > +
> > +/* NCHARS = 10 + 26 + 26 = 62 */
> > +#define NCHARS 62
> > +#define MAX_LEN1 62
> > +#define MAX_LEN2 (62 * 62)
> > +#define MAX_LEN3 (62 * 62 * 62)
> > +#define MAX_NAMES (MAX_LEN1 + MAX_LEN2 + MAX_LEN3)
> > +
> > +/* valid characters for a directory name */
> > +char chars[] = "0123456789qwertyuiopasdfghjklzxcvbnmQWERTYUIOPASDFGHJKLZXCVBNM";
> > +
> > +/* to store the generated directory name */
> > +char name[10];
> > +int names;
> > +int parent_fd;
> > +
> > +void create_dir(void)
> > +{
> > + if (mkdirat(parent_fd, name, S_IRWXU)) {
> > + perror("mkdir");
> > + exit(1);
> > + }
> > +}
> > +
> > +/*
> > + * create_1 - create length-1 directory names
> > + * @n: how name names to be created
> > + */
> > +void create_1(int n)
> > +{
> > + int i;
> > +
> > + name[1] = '\0';
> > + for (i = 0; i < NCHARS; i++) {
> > + name[0] = chars[i];
> > + create_dir();
> > + if (--n == 0)
> > + return;
> > + }
> > +}
> > +
> > +/*
> > + * create_2 - generate length-2 directory names
> > + * @n: how many names to be created
> > + */
> > +void create_2(int n)
> > +{
> > + int i, j;
> > +
> > + name[2] = '\0';
> > + for (i = 0; i < NCHARS; i++) {
> > + name[0] = chars[i];
> > + for (j = 0; j < NCHARS; j++) {
> > + name[1] = chars[j];
> > + create_dir();
> > + if (--n == 0)
> > + return;
> > + }
> > + }
> > +}
> > +
> > +/*
> > + * create_3 - generate length-3 directory names
> > + * @n: how many names to be created
> > + */
> > +void create_3(int n)
> > +{
> > + int i, j, k;
> > +
> > + name[3] = '\0';
> > + for (i = 0; i < NCHARS; i++) {
> > + name[0] = chars[i];
> > + for (j = 0; j < NCHARS; j++) {
> > + name[1] = chars[j];
> > + for (k = 0; k < NCHARS; k++) {
> > + name[2] = chars[k];
> > + create_dir();
> > + if (--n == 0)
> > + return;
> > + }
> > + }
> > + }
> > +}
> > +
> > +void usage()
> > +{
> > + fprintf(stderr, "Usage: create_short_dirs nr_dirs parent_dir\n");
> > +}
> > +
> > +/*
> > + * Create short-name directoriess
> > + * @argv[1]: director number
> > + * @argv[2]: the parent directory
> > + */
> > +int main(int argc, char *argv[])
> > +{
> > + if (argc != 3) {
> > + usage();
> > + return 1;
> > + }
> > +
> > + names = atoi(argv[1]);
> > + if (names > MAX_NAMES || names <= 0) {
> > + usage();
> > + return 1;
> > + }
> > +
> > + parent_fd = open(argv[2], O_RDONLY);
> > + if (parent_fd == -1) {
> > + perror("open parent dir failed");
> > + return 1;
> > + }
> > +
> > + create_1(names);
> > + if (names <= MAX_LEN1)
> > + return 0;
> > +
> > + names -= MAX_LEN1;
> > + create_2(names);
> > + if (names <= MAX_LEN2)
> > + return 0;
> > +
> > + names -= MAX_LEN2;
> > + create_3(names);
> > +
> > + return 0;
> > +}
> > diff --git a/src/t_ext4_file_time.c b/src/t_ext4_file_time.c
> > new file mode 100644
> > index 00000000..d0184545
> > --- /dev/null
> > +++ b/src/t_ext4_file_time.c
> > @@ -0,0 +1,53 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright (c) 2009 FUJITSU LIMITED
> > + * Author: Li Zefan <lizf@cn.fujitsu.com>
> > + */
> > +
> > +#include <sys/types.h>
> > +#include <sys/stat.h>
> > +#include <unistd.h>
> > +#include <stdio.h>
> > +#include <string.h>
> > +
> > +/*
> > + * Usage: file_time <filename> <atime|mtime|ctime> <sec|nsec>
> > + */
> > +int main(int argc, char *argv[])
> > +{
> > + time_t t;
> > + struct stat st;
> > +
> > + if (argc != 4) {
> > + fprintf(stderr, "Wrong argument num!\n");
> > + return 1;
> > + }
> > +
> > + if (stat(argv[1], &st) != 0) {
> > + perror("stat failed");
> > + return 1;
> > + }
> > +
> > + if (strcmp(argv[3], "sec") == 0) {
> > + if (strcmp(argv[2], "atime") == 0)
> > + t = st.st_atime;
> > + else if (strcmp(argv[2], "mtime") == 0)
> > + t = st.st_mtime;
> > + else
> > + t = st.st_ctime;
> > + } else if (strcmp(argv[3], "nsec") == 0) {
> > + if (strcmp(argv[2], "atime") == 0)
> > + t = st.st_atim.tv_nsec;
> > + else if (strcmp(argv[2], "mtime") == 0)
> > + t = st.st_mtim.tv_nsec;
> > + else
> > + t = st.st_ctim.tv_nsec;
> > + } else {
> > + fprintf(stderr, "Wrong argument: %s\n", argv[3]);
> > + return 1;
> > + }
> > +
> > + printf("%lu\n", t);
> > +
> > + return 0;
> > +}
> > diff --git a/tests/ext4/043 b/tests/ext4/043
> > new file mode 100755
> > index 00000000..8a9f6d45
> > --- /dev/null
> > +++ b/tests/ext4/043
> > @@ -0,0 +1,56 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0
> > +# Copyright (c) 2019 SUSE Linux Products GmbH. All Rights Reserved.
> > +#
> > +# FS QA Test No. 043
> > +#
> > +# Test file timestamps are only precise to seconds with 128-byte inodes."
> > +#
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1 # failure is the default!
> > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > +
> > +_cleanup()
> > +{
> > + cd /
> > + rm -f $tmp.*
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/filter
> > +
> > +# remove previous $seqres.full before test
> > +rm -f $seqres.full
> > +
> > +# real QA test starts here
> > +_supported_fs ext3 ext4
> > +_supported_os Linux
> > +
> > +_require_scratch
> > +_require_test_program "t_ext4_file_time"
> > +
> > +echo "Silence is golden"
> > +
> > +echo "Start test timestamps with 128 inode size one device $SCRATCH_DEV" >$seqres.full
> > +_scratch_mkfs_ext4 -I 128 >> $seqres.full 2>&1
>
> _scratch_mkfs_ext4 uses mkfs.ext4, which creates filesystem could not be
> mounted by ext3 driver, so when testing ext3 mount fails here.
>
> Just use _scratch_mkfs.
>
> > +_scratch_mount
> > +
> > +touch "${SCRATCH_MNT}/tmp_file"
> > +
> > +atime=`$here/src/t_ext4_file_time $SCRATCH_MNT/tmp_file atime nsec`
> > +mtime=`$here/src/t_ext4_file_time $SCRATCH_MNT/tmp_file mtime nsec`
> > +ctime=`$here/src/t_ext4_file_time $SCRATCH_MNT/tmp_file ctime nsec`
> > +
> > +if [ $atime -ne 0 -o $mtime -ne 0 -o $ctime -ne 0 ]; then
> > + echo "nsec should be zero when extended timestamps are disabled"
> > + echo "atime: $atime, mtime: $mtime, ctime: $ctime"
> > +fi
> > +
> > +status=0
> > +exit
> > diff --git a/tests/ext4/043.out b/tests/ext4/043.out
> > new file mode 100644
> > index 00000000..f90f0a57
> > --- /dev/null
> > +++ b/tests/ext4/043.out
> > @@ -0,0 +1,2 @@
> > +QA output created by 043
> > +Silence is golden
> > diff --git a/tests/ext4/044 b/tests/ext4/044
> > new file mode 100755
> > index 00000000..a1412684
> > --- /dev/null
> > +++ b/tests/ext4/044
> > @@ -0,0 +1,87 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0
> > +# Copyright (c) 2019 SUSE Linux Products GmbH. All Rights Reserved.
> > +#
> > +# FS QA Test No. 044
> > +#
> > +# Test file timestamps are precise to nanoseconds with 256-byte inodes
> > +#
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1 # failure is the default!
> > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > +
> > +_cleanup()
> > +{
> > + cd /
> > + rm -f $tmp.*
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +
> > +# remove previous $seqres.full before test
> > +rm -f $seqres.full
> > +
> > +# real QA test starts here
> > +_supported_fs ext3 ext4
>
> Test first mounts as ext3 then ext4, when testing ext3 the two mounts
> are all mounted with ext3. I think supporting ext4 only should be fine.
>
> > +_supported_os Linux
> > +_require_scratch
> > +_require_test_program "t_ext4_file_time"
> > +
> > +echo "Silence is golden"
> > +
> > +echo "Test timestamps with 256 inode size one device $SCRATCH_DEV" >$seqres.full
> > +_scratch_mkfs_ext4 -t ext3 -I 256 >> $seqres.full 2>&1
>
> _scratch_mkfs
>
> > +_scratch_mount
> > +
> > +# Create file
> > +touch "${SCRATCH_MNT}/tmp_file"
> > +sleep 1
> > +
> > +# Change atime, ctime and mtime of the file
> > +touch "${SCRATCH_MNT}/tmp_file"
> > +
> > +cur_time=`date '+%s %N'`
> > +sec=`echo $cur_time | awk {'print $1'}`
> > +nsec=`echo $cur_time | awk {'print $2'}`
> > +
> > +sec_atime=`$here/src/t_ext4_file_time $SCRATCH_MNT/tmp_file atime sec`
> > +sec_mtime=`$here/src/t_ext4_file_time $SCRATCH_MNT/tmp_file mtime sec`
> > +sec_ctime=`$here/src/t_ext4_file_time $SCRATCH_MNT/tmp_file ctime sec`
> > +nsec_atime=`$here/src/t_ext4_file_time $SCRATCH_MNT/tmp_file atime nsec`
> > +nsec_mtime=`$here/src/t_ext4_file_time $SCRATCH_MNT/tmp_file mtime nsec`
> > +nsec_ctime=`$here/src/t_ext4_file_time $SCRATCH_MNT/tmp_file ctime nsec`
> > +
> > +# Test nanosecond
> > +if [ $nsec_atime -eq 0 -a $nsec_mtime -eq 0 -a $nsec_ctime -eq 0 ]; then
> > + _fail "The timestamp is not nanosecond(nsec_atime: $nsec_atime, \
> > + nsec_mtime: $nsec_mtime, nsec_ctime: $nsec_ctime, cur_time[ns]: $nsec)"
>
> Just echo, no need to _fail.
>
> > +fi
> > +
> > +# Check difference between file time and current time
> > +[ $(( $sec_atime - $sec )) -gt 1 ] && echo "The timestamp is wrong, sec_atime: $sec_atime, cur_time[s]: $sec"
> > +[ $(( $sec_mtime - $sec )) -gt 1 ] && echo "The timestamp is wrong, sec_atime: $sec_atime, cur_time[s]: $sec"
> mtime mtime
> > +[ $(( $sec_ctime - $sec )) -gt 1 ] && echo "The timestamp is wrong, sec_atime: $sec_atime, cur_time[s]: $sec"
> ctime ctime
> > +
> > +_scratch_unmount >> $seqres.full 2>&1
> > +
> > +# Test mount to ext3 then mount back to ext4 and check timestamp again
> > +_mount -t ext3 `_scratch_mount_options $*` || _fail "ext3 mount failed"
> > +_scratch_unmount >> $seqres.full 2>&1
> > +_scratch_mount
> > +
> > +nsec_atime2=`$here/src/t_ext4_file_time $SCRATCH_MNT/tmp_file atime nsec`
> > +nsec_mtime2=`$here/src/t_ext4_file_time $SCRATCH_MNT/tmp_file mtime nsec`
> > +nsec_ctime2=`$here/src/t_ext4_file_time $SCRATCH_MNT/tmp_file ctime nsec`
> > +
> > +[ $nsec_atime -ne $nsec_atime2 ] && echo "File nanosecond timestamp atime has changed unexpected from $nsec_atime to $nsec_atime2"
> > +[ $nsec_mtime -ne $nsec_mtime2 ] && echo "File nanosecond timestamp mtime has changed unexpected from $nsec_mtime to $nsec_mtime2"
> > +[ $nsec_ctime -ne $nsec_ctime2 ] && echo "File nanosecond timestamp ctime has changed unexpected from $nsec_ctime to $nsec_ctime2"
> > +
> > +status=0
> > +exit
> > diff --git a/tests/ext4/044.out b/tests/ext4/044.out
> > new file mode 100644
> > index 00000000..12a61dc4
> > --- /dev/null
> > +++ b/tests/ext4/044.out
> > @@ -0,0 +1,2 @@
> > +QA output created by 044
> > +Silence is golden
> > diff --git a/tests/ext4/045 b/tests/ext4/045
> > new file mode 100755
> > index 00000000..76cc5067
> > --- /dev/null
> > +++ b/tests/ext4/045
> > @@ -0,0 +1,134 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0
> > +# Copyright (c) 2019 SUSE Linux Products GmbH. All Rights Reserved.
> > +#
> > +# FS QA Test No. 045
> > +#
> > +# Test subdirectory limit of ext4.
> > +# We create more than 32000 subdirectories on the ext4 filesystem.
> > +#
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1 # failure is the default!
> > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > +
> > +SHORT_DIR=1
> > +LONG_DIR=2
> > +FAIL=1
> > +PASS=0
> > +prev_block_size=0
> > +prev_result=$FAIL
> > +
> > +_cleanup()
> > +{
> > + cd /
> > + rm -f $tmp.*
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/filter
> > +
> > +# remove previous $seqres.full before test
> > +rm -f $seqres.full
> > +
> > +# real QA test starts here
> > +_supported_fs ext4
> > +_supported_os Linux
> > +
> > +_require_scratch
> > +_require_test_program "t_create_short_dirs"
> > +_require_test_program "t_create_long_dirs"
> > +_require_dumpe2fs "$DUMPE2FS_PROG" dumpe2fs
> > +
> > +echo "Silence is golden"
> > +
> > +# Run a test case
> > +# $1: Number of directories to create
> > +# $2: create short dir or long dir
> > +# $3: parent directory
> > +# $4: filesystem block size
> > +workout()
> > +{
> > + local dir_name_len=
> > + if [ $2 -eq $SHORT_DIR ]; then
> > + dir_name_len="short name"
>
> Use tab as indention in this test.
>
> > + else
> > + dir_name_len="long name"
> > + fi
> > +
> > + echo "Num of dirs to create: $1, Dir name len: $dir_name_len, " \
> > + "Parent dir: $3, Block size: $4" >> $seqres.full 2>&1
>
> "2>&1" is not needed.
>
> > +
> > + # Only mkfs if block size has been changed, or previous case failed
> > + if [ $prev_result -ne $PASS -o $4 -ne $prev_block_size ]; then
> > + _scratch_mkfs -b $4 -I 256 >> $seqres.full 2>&1
> > + prev_block_size=$4
> > + fi
>
> Why skipping mkfs? Save test time? Need some comments.
>
> > + prev_result=$FAIL
> > +
> > + _scratch_mount
> > +
> > + # create directories
> > + mkdir -p $3 2> /dev/null
> > +
> > + if [ $2 -eq $SHORT_DIR ]; then
> > + $here/src/t_create_short_dirs $1 $3
> > + else
> > + $here/src/t_create_long_dirs $1 $3
> > + fi
> > +
> > + if [ $? -ne 0 ]; then
> > + nr_dirs=`ls $3 | wc -l`
> > + echo "Failed to create directories - $nr_dirs"
> > + _scratch_unmount
> > + return
> > + fi
> > +
> > + # delete directories
> > + cd $3
> > + ls | xargs rmdir
> > + if [ $? -ne 0 ]; then
> > + echo "Failed to remove directories in $3"
> > + cd - > /dev/null
> > + _scratch_unmount
> > + return
> > + fi
> > + cd - > /dev/null
> > + _scratch_unmount
> > +
> > + # check dir_nlink is set
> > + $DUMPE2FS_PROG $SCRATCH_DEV 2> /dev/null | grep '^Filesystem features' | grep -q dir_nlink
>
> dumpe2fs -h <dev> should be fine, there's no need to dump all filesystem
> info.
>
> > + if [ $? -ne 0 ]; then
> > + echo "Feature dir_nlink is not set, please check $seqres.full for detail"
>
> And it's better to dump dumpe2fs output to $seqres.full as well on
> error.
>
> > + return
> > + fi
> > +
> > + # run fsck to make sure the filesystem has no errors
> > + _check_scratch_fs
>
> I noticed the following errors, 1k 2k 4k blocksize ext4 all failed, is
> that a known issue? Does it fail in LTP as well?
>
> *** fsck.ext4 output ***
> fsck from util-linux 2.34
> e2fsck 1.45.3 (14-Jul-2019)
> Pass 1: Checking inodes, blocks, and sizes
> Pass 2: Checking directory structure
> Pass 3: Checking directory connectivity
> Pass 4: Checking reference counts
> Inode 2 ref count is 1, should be 2. Fix? no
>
> Pass 5: Checking group summary information
>
> /dev/mapper/testvg-lv2: ********** WARNING: Filesystem still has errors **********
>
> /dev/mapper/testvg-lv2: 10/983040 files (10.0% non-contiguous), 164028/7864320 blocks
> *** end fsck.ext4 output
>
> > + prev_result=$PASS
> > +}
> > +
> > +# main
> > +DIR_LEN=( $SHORT_DIR $LONG_DIR )
> > +PARENT_DIR=( "$SCRATCH_MNT" "$SCRATCH_MNT/sub" )
> > +BLOCK_SIZE=( 1024 2048 4096 )
> > +
> > +for ((i = 0; i < 3; i++)); do
> > + for ((j = 0; j < 2; j++)); do
> > + for ((k = 0; k < 2; k++)); do
> > + if [ ${DIR_LEN[$k]} -eq $LONG_DIR -a \
> > + ${BLOCK_SIZE[$i]} -eq 1024 ]; then
> > + continue
> > + fi
> > + workout 65537 ${DIR_LEN[$k]} ${PARENT_DIR[$j]} ${BLOCK_SIZE[$i]}
> > + done
> > + done
> > +done
> > +
> > +status=0
> > +exit
> > diff --git a/tests/ext4/045.out b/tests/ext4/045.out
> > new file mode 100644
> > index 00000000..66276cfa
> > --- /dev/null
> > +++ b/tests/ext4/045.out
> > @@ -0,0 +1,2 @@
> > +QA output created by 045
> > +Silence is golden
> > diff --git a/tests/ext4/group b/tests/ext4/group
> > index 9dfc0d35..9c2f600b 100644
> > --- a/tests/ext4/group
> > +++ b/tests/ext4/group
> > @@ -45,6 +45,9 @@
> > 040 dangerous_fuzzers
> > 041 dangerous_fuzzers
> > 042 auto quick
> > +043 auto quick
> > +044 auto quick
> > +045 auto quick dir
>
> 045 is not quick.
>
> Thanks,
> Eryu
>
> > 271 auto rw quick
> > 301 aio auto ioctl rw stress defrag
> > 302 aio auto ioctl rw stress defrag
> > --
> > 2.24.0
> >
^ permalink raw reply [flat|nested] only message in thread