linux-ext4.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Zhang Yi <yi.zhang@huaweicloud.com>
To: linux-ext4@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org, linux-mm@kvack.org,
	linux-kernel@vger.kernel.org, tytso@mit.edu,
	adilger.kernel@dilger.ca, jack@suse.cz, ritesh.list@gmail.com,
	hch@infradead.org, djwong@kernel.org, willy@infradead.org,
	zokeefe@google.com, yi.zhang@huawei.com,
	yi.zhang@huaweicloud.com, chengzhihao1@huawei.com,
	yukuai3@huawei.com, wangkefeng.wang@huawei.com
Subject: [RFC PATCH v3 07/26] iomap: don't increase i_size if it's not a write operation
Date: Sat, 27 Jan 2024 09:58:06 +0800	[thread overview]
Message-ID: <20240127015825.1608160-8-yi.zhang@huaweicloud.com> (raw)
In-Reply-To: <20240127015825.1608160-1-yi.zhang@huaweicloud.com>

From: Zhang Yi <yi.zhang@huawei.com>

Increase i_size in iomap_zero_range() and iomap_unshare_iter() is not
needed, the caller should handle it. Especially, when truncate partial
block, we could not increase i_size beyond the new EOF here. It dosn't
affect xfs and gfs2 now because they reset the new file size after zero
out, it doesn't matter that a brief increase in i_size, but it will
affect ext4 because it set file size before truncate. At the same time,
iomap_write_failed() is also not needed for above two cases too, so
let's introduce a new helper iomap_write_end_simple() to replace the
common iomap_write_end() helper which designed for buffer write, and
also move out iomap_write_failed() from iomap_write_begin() to
iomap_write_iter().

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
---
 fs/iomap/buffered-io.c | 28 ++++++++++++++++++++++++----
 1 file changed, 24 insertions(+), 4 deletions(-)

diff --git a/fs/iomap/buffered-io.c b/fs/iomap/buffered-io.c
index e0c9cede82ee..2ae936e5af74 100644
--- a/fs/iomap/buffered-io.c
+++ b/fs/iomap/buffered-io.c
@@ -834,7 +834,6 @@ static int iomap_write_begin(struct iomap_iter *iter, loff_t pos,
 
 out_unlock:
 	__iomap_put_folio(iter, pos, 0, folio);
-	iomap_write_failed(iter->inode, pos, len);
 
 	return status;
 }
@@ -881,6 +880,25 @@ static size_t iomap_write_end_inline(const struct iomap_iter *iter,
 	return copied;
 }
 
+static size_t iomap_write_end_simple(struct iomap_iter *iter, loff_t pos,
+		size_t len, struct folio *folio)
+{
+	const struct iomap *srcmap = iomap_iter_srcmap(iter);
+	size_t ret;
+
+	if (srcmap->type == IOMAP_INLINE) {
+		ret = iomap_write_end_inline(iter, folio, pos, len);
+	} else if (srcmap->flags & IOMAP_F_BUFFER_HEAD) {
+		ret = block_write_end(NULL, iter->inode->i_mapping, pos, len,
+				len, &folio->page, NULL);
+	} else {
+		ret = __iomap_write_end(iter->inode, pos, len, len, folio);
+	}
+
+	__iomap_put_folio(iter, pos, ret, folio);
+	return ret;
+}
+
 /* Returns the number of bytes copied.  May be 0.  Cannot be an errno. */
 static size_t iomap_write_end(struct iomap_iter *iter, loff_t pos, size_t len,
 		size_t copied, struct folio *folio)
@@ -960,8 +978,10 @@ static loff_t iomap_write_iter(struct iomap_iter *iter, struct iov_iter *i)
 		}
 
 		status = iomap_write_begin(iter, pos, bytes, &folio);
-		if (unlikely(status))
+		if (unlikely(status)) {
+			iomap_write_failed(iter->inode, pos, bytes);
 			break;
+		}
 		if (iter->iomap.flags & IOMAP_F_STALE)
 			break;
 
@@ -1343,7 +1363,7 @@ static loff_t iomap_unshare_iter(struct iomap_iter *iter)
 		if (bytes > folio_size(folio) - offset)
 			bytes = folio_size(folio) - offset;
 
-		bytes = iomap_write_end(iter, pos, bytes, bytes, folio);
+		bytes = iomap_write_end_simple(iter, pos, bytes, folio);
 		if (WARN_ON_ONCE(bytes == 0))
 			return -EIO;
 
@@ -1407,7 +1427,7 @@ static loff_t iomap_zero_iter(struct iomap_iter *iter, bool *did_zero)
 		folio_zero_range(folio, offset, bytes);
 		folio_mark_accessed(folio);
 
-		bytes = iomap_write_end(iter, pos, bytes, bytes, folio);
+		bytes = iomap_write_end_simple(iter, pos, bytes, folio);
 		if (WARN_ON_ONCE(bytes == 0))
 			return -EIO;
 
-- 
2.39.2


  parent reply	other threads:[~2024-01-27  2:02 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-27  1:57 [RFC PATCH v3 00/26] ext4: use iomap for regular file's buffered IO path and enable large foilo Zhang Yi
2024-01-27  1:58 ` [PATCH v3 01/26] ext4: refactor ext4_da_map_blocks() Zhang Yi
2024-02-03 17:56   ` Theodore Ts'o
2024-01-27  1:58 ` [PATCH v3 02/26] ext4: convert to exclusive lock while inserting delalloc extents Zhang Yi
2024-02-03 17:56   ` Theodore Ts'o
2024-01-27  1:58 ` [PATCH v3 03/26] ext4: correct the hole length returned by ext4_map_blocks() Zhang Yi
2024-02-03 17:56   ` Theodore Ts'o
2024-05-09 15:16   ` Luis Henriques
2024-05-09 16:39     ` Theodore Ts'o
2024-05-09 17:23       ` Luis Henriques
2024-05-10  3:39         ` Zhang Yi
2024-05-10  9:41           ` Luis Henriques
2024-05-10 11:40             ` Zhang Yi
2024-01-27  1:58 ` [PATCH v3 04/26] ext4: add a hole extent entry in cache after punch Zhang Yi
2024-02-03 17:56   ` Theodore Ts'o
2024-01-27  1:58 ` [PATCH v3 05/26] ext4: make ext4_map_blocks() distinguish delalloc only extent Zhang Yi
2024-02-03 17:57   ` Theodore Ts'o
2024-01-27  1:58 ` [PATCH v3 06/26] ext4: make ext4_set_iomap() recognize IOMAP_DELALLOC map type Zhang Yi
2024-02-03 17:57   ` Theodore Ts'o
2024-01-27  1:58 ` Zhang Yi [this message]
2024-02-13  5:46   ` [RFC PATCH v3 07/26] iomap: don't increase i_size if it's not a write operation Christoph Hellwig
2024-02-17  8:55     ` Zhang Yi
2024-02-18 23:30       ` Dave Chinner
2024-02-19  1:14         ` Zhang Yi
2024-02-28  8:53     ` Zhang Yi
2024-02-28 22:13       ` Christoph Hellwig
2024-02-29  9:20         ` Zhang Yi
2024-02-28 22:25       ` Dave Chinner
2024-02-29  8:59         ` Zhang Yi
2024-02-29 23:19           ` Dave Chinner
2024-02-29 23:29             ` Darrick J. Wong
2024-03-01  3:26             ` Zhang Yi
2024-01-27  1:58 ` [RFC PATCH v3 08/26] iomap: add pos and dirty_len into trace_iomap_writepage_map Zhang Yi
2024-02-12  6:02   ` Christoph Hellwig
2024-02-19  1:27     ` Zhang Yi
2024-01-27  1:58 ` [RFC PATCH v3 09/26] ext4: allow inserting delalloc extents with multi-blocks Zhang Yi
2024-01-27  1:58 ` [RFC PATCH v3 10/26] ext4: correct delalloc extent length Zhang Yi
2024-01-27  1:58 ` [RFC PATCH v3 11/26] ext4: also mark extent as delalloc if it's been unwritten Zhang Yi
2024-01-27  1:58 ` [RFC PATCH v3 12/26] ext4: factor out bh handles to ext4_da_get_block_prep() Zhang Yi
2024-01-27  1:58 ` [RFC PATCH v3 13/26] ext4: use reserved metadata blocks when splitting extent in endio Zhang Yi
2024-01-27  1:58 ` [RFC PATCH v3 14/26] ext4: factor out ext4_map_{create|query}_blocks() Zhang Yi
2024-01-27  1:58 ` [RFC PATCH v3 15/26] ext4: introduce seq counter for extent entry Zhang Yi
2024-01-27  1:58 ` [RFC PATCH v3 16/26] ext4: add a new iomap aops for regular file's buffered IO path Zhang Yi
2024-01-27  1:58 ` [RFC PATCH v3 17/26] ext4: implement buffered read iomap path Zhang Yi
2024-01-27  1:58 ` [RFC PATCH v3 18/26] ext4: implement buffered write " Zhang Yi
2024-01-27  1:58 ` [RFC PATCH v3 19/26] ext4: implement writeback " Zhang Yi
2024-01-27  1:58 ` [RFC PATCH v3 20/26] ext4: implement mmap " Zhang Yi
2024-01-27  1:58 ` [RFC PATCH v3 21/26] ext4: implement zero_range " Zhang Yi
2024-01-27  1:58 ` [RFC PATCH v3 22/26] ext4: writeback partial blocks before zero range Zhang Yi
2024-01-27  1:58 ` [RFC PATCH v3 23/26] ext4: fall back to buffer_head path for defrag Zhang Yi
2024-01-27  1:58 ` [RFC PATCH v3 24/26] ext4: partially enable iomap for regular file's buffered IO path Zhang Yi
2024-01-27  1:58 ` [RFC PATCH v3 25/26] filemap: support disable large folios on active inode Zhang Yi
2024-01-27  1:58 ` [RFC PATCH v3 26/26] ext4: enable large folio for regular file with iomap buffered IO path Zhang Yi
2024-02-12  6:18 ` [RFC PATCH v3 00/26] ext4: use iomap for regular file's buffered IO path and enable large foilo Darrick J. Wong
2024-02-12  9:16   ` Ritesh Harjani
2024-02-12 10:24     ` Matthew Wilcox
2024-02-17  9:31   ` Zhang Yi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240127015825.1608160-8-yi.zhang@huaweicloud.com \
    --to=yi.zhang@huaweicloud.com \
    --cc=adilger.kernel@dilger.ca \
    --cc=chengzhihao1@huawei.com \
    --cc=djwong@kernel.org \
    --cc=hch@infradead.org \
    --cc=jack@suse.cz \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=ritesh.list@gmail.com \
    --cc=tytso@mit.edu \
    --cc=wangkefeng.wang@huawei.com \
    --cc=willy@infradead.org \
    --cc=yi.zhang@huawei.com \
    --cc=yukuai3@huawei.com \
    --cc=zokeefe@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).