* [PATCH v3 0/2] backlight: lm3630a: convert to atomic PWM API @ 2021-06-21 12:21 Uwe Kleine-König 2021-06-21 12:21 ` [PATCH v3 1/2] backlight: lm3630a: fix return code of .update_status() callback Uwe Kleine-König 2021-06-21 12:21 ` [PATCH v3 2/2] backlight: lm3630a: convert to atomic PWM API and check for errors Uwe Kleine-König 0 siblings, 2 replies; 9+ messages in thread From: Uwe Kleine-König @ 2021-06-21 12:21 UTC (permalink / raw) To: Lee Jones, Daniel Thompson, Jingoo Han Cc: linux-fbdev, Thierry Reding, dri-devel, kernel, Uwe Kleine-König From: Uwe Kleine-König <uwe@kleine-koenig.org> Hello, this is v3 of the series. In v1 and v2 I failed to notice that the driver contains two (nearly identical) update_status callbacks. Daniel pointed that out, so here comes v3. Best regards Uwe Uwe Kleine-König (2): backlight: lm3630a: fix return code of .update_status() callback backlight: lm3630a: convert to atomic PWM API and check for errors drivers/video/backlight/lm3630a_bl.c | 50 +++++++++++++--------------- 1 file changed, 23 insertions(+), 27 deletions(-) -- 2.30.2 ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v3 1/2] backlight: lm3630a: fix return code of .update_status() callback 2021-06-21 12:21 [PATCH v3 0/2] backlight: lm3630a: convert to atomic PWM API Uwe Kleine-König @ 2021-06-21 12:21 ` Uwe Kleine-König 2021-06-21 13:06 ` Daniel Thompson 2021-06-22 13:11 ` Lee Jones 2021-06-21 12:21 ` [PATCH v3 2/2] backlight: lm3630a: convert to atomic PWM API and check for errors Uwe Kleine-König 1 sibling, 2 replies; 9+ messages in thread From: Uwe Kleine-König @ 2021-06-21 12:21 UTC (permalink / raw) To: Lee Jones, Daniel Thompson, Jingoo Han Cc: linux-fbdev, Thierry Reding, dri-devel, kernel According to <linux/backlight.h> .update_status() is supposed to return 0 on success and a negative error code otherwise. Adapt lm3630a_bank_a_update_status() and lm3630a_bank_b_update_status() to actually do it. While touching that also add the error code to the failure message. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> --- drivers/video/backlight/lm3630a_bl.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c index e88a2b0e5904..7140b0d98082 100644 --- a/drivers/video/backlight/lm3630a_bl.c +++ b/drivers/video/backlight/lm3630a_bl.c @@ -190,7 +190,7 @@ static int lm3630a_bank_a_update_status(struct backlight_device *bl) if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0) { lm3630a_pwm_ctrl(pchip, bl->props.brightness, bl->props.max_brightness); - return bl->props.brightness; + return 0; } /* disable sleep */ @@ -210,8 +210,8 @@ static int lm3630a_bank_a_update_status(struct backlight_device *bl) return 0; out_i2c_err: - dev_err(pchip->dev, "i2c failed to access\n"); - return bl->props.brightness; + dev_err(pchip->dev, "i2c failed to access (%pe)\n", ERR_PTR(ret)); + return ret; } static int lm3630a_bank_a_get_brightness(struct backlight_device *bl) @@ -267,7 +267,7 @@ static int lm3630a_bank_b_update_status(struct backlight_device *bl) if ((pwm_ctrl & LM3630A_PWM_BANK_B) != 0) { lm3630a_pwm_ctrl(pchip, bl->props.brightness, bl->props.max_brightness); - return bl->props.brightness; + return 0; } /* disable sleep */ @@ -287,8 +287,8 @@ static int lm3630a_bank_b_update_status(struct backlight_device *bl) return 0; out_i2c_err: - dev_err(pchip->dev, "i2c failed to access REG_CTRL\n"); - return bl->props.brightness; + dev_err(pchip->dev, "i2c failed to access (%pe)\n", ERR_PTR(ret)); + return ret; } static int lm3630a_bank_b_get_brightness(struct backlight_device *bl) -- 2.30.2 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v3 1/2] backlight: lm3630a: fix return code of .update_status() callback 2021-06-21 12:21 ` [PATCH v3 1/2] backlight: lm3630a: fix return code of .update_status() callback Uwe Kleine-König @ 2021-06-21 13:06 ` Daniel Thompson 2021-06-22 13:11 ` Lee Jones 1 sibling, 0 replies; 9+ messages in thread From: Daniel Thompson @ 2021-06-21 13:06 UTC (permalink / raw) To: Uwe Kleine-König Cc: Lee Jones, Jingoo Han, linux-fbdev, Thierry Reding, dri-devel, kernel On Mon, Jun 21, 2021 at 02:21:47PM +0200, Uwe Kleine-König wrote: > According to <linux/backlight.h> .update_status() is supposed to > return 0 on success and a negative error code otherwise. Adapt > lm3630a_bank_a_update_status() and lm3630a_bank_b_update_status() to > actually do it. > > While touching that also add the error code to the failure message. > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Daniel. > --- > drivers/video/backlight/lm3630a_bl.c | 12 ++++++------ > 1 file changed, 6 insertions(+), 6 deletions(-) > > diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c > index e88a2b0e5904..7140b0d98082 100644 > --- a/drivers/video/backlight/lm3630a_bl.c > +++ b/drivers/video/backlight/lm3630a_bl.c > @@ -190,7 +190,7 @@ static int lm3630a_bank_a_update_status(struct backlight_device *bl) > if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0) { > lm3630a_pwm_ctrl(pchip, bl->props.brightness, > bl->props.max_brightness); > - return bl->props.brightness; > + return 0; > } > > /* disable sleep */ > @@ -210,8 +210,8 @@ static int lm3630a_bank_a_update_status(struct backlight_device *bl) > return 0; > > out_i2c_err: > - dev_err(pchip->dev, "i2c failed to access\n"); > - return bl->props.brightness; > + dev_err(pchip->dev, "i2c failed to access (%pe)\n", ERR_PTR(ret)); > + return ret; > } > > static int lm3630a_bank_a_get_brightness(struct backlight_device *bl) > @@ -267,7 +267,7 @@ static int lm3630a_bank_b_update_status(struct backlight_device *bl) > if ((pwm_ctrl & LM3630A_PWM_BANK_B) != 0) { > lm3630a_pwm_ctrl(pchip, bl->props.brightness, > bl->props.max_brightness); > - return bl->props.brightness; > + return 0; > } > > /* disable sleep */ > @@ -287,8 +287,8 @@ static int lm3630a_bank_b_update_status(struct backlight_device *bl) > return 0; > > out_i2c_err: > - dev_err(pchip->dev, "i2c failed to access REG_CTRL\n"); > - return bl->props.brightness; > + dev_err(pchip->dev, "i2c failed to access (%pe)\n", ERR_PTR(ret)); > + return ret; > } > > static int lm3630a_bank_b_get_brightness(struct backlight_device *bl) > -- > 2.30.2 > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v3 1/2] backlight: lm3630a: fix return code of .update_status() callback 2021-06-21 12:21 ` [PATCH v3 1/2] backlight: lm3630a: fix return code of .update_status() callback Uwe Kleine-König 2021-06-21 13:06 ` Daniel Thompson @ 2021-06-22 13:11 ` Lee Jones 1 sibling, 0 replies; 9+ messages in thread From: Lee Jones @ 2021-06-22 13:11 UTC (permalink / raw) To: Uwe Kleine-König Cc: Daniel Thompson, Jingoo Han, linux-fbdev, Thierry Reding, dri-devel, kernel On Mon, 21 Jun 2021, Uwe Kleine-König wrote: > According to <linux/backlight.h> .update_status() is supposed to > return 0 on success and a negative error code otherwise. Adapt > lm3630a_bank_a_update_status() and lm3630a_bank_b_update_status() to > actually do it. > > While touching that also add the error code to the failure message. > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> > --- > drivers/video/backlight/lm3630a_bl.c | 12 ++++++------ > 1 file changed, 6 insertions(+), 6 deletions(-) Fixed the subject line for you and applied, thanks. -- Lee Jones [李琼斯] Senior Technical Lead - Developer Services Linaro.org │ Open source software for Arm SoCs Follow Linaro: Facebook | Twitter | Blog ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v3 2/2] backlight: lm3630a: convert to atomic PWM API and check for errors 2021-06-21 12:21 [PATCH v3 0/2] backlight: lm3630a: convert to atomic PWM API Uwe Kleine-König 2021-06-21 12:21 ` [PATCH v3 1/2] backlight: lm3630a: fix return code of .update_status() callback Uwe Kleine-König @ 2021-06-21 12:21 ` Uwe Kleine-König 2021-06-21 13:14 ` Daniel Thompson 2021-06-22 13:12 ` Lee Jones 1 sibling, 2 replies; 9+ messages in thread From: Uwe Kleine-König @ 2021-06-21 12:21 UTC (permalink / raw) To: Lee Jones, Daniel Thompson, Jingoo Han Cc: linux-fbdev, Thierry Reding, dri-devel, kernel The practical upside here is that this only needs a single API call to program the hardware which (depending on the underlaying hardware) can be more effective and prevents glitches. Up to now the return value of the pwm functions was ignored. Fix this and propagate the error to the caller. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> --- drivers/video/backlight/lm3630a_bl.c | 42 +++++++++++++--------------- 1 file changed, 19 insertions(+), 23 deletions(-) diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c index 7140b0d98082..f377dfdd9868 100644 --- a/drivers/video/backlight/lm3630a_bl.c +++ b/drivers/video/backlight/lm3630a_bl.c @@ -52,6 +52,7 @@ struct lm3630a_chip { struct gpio_desc *enable_gpio; struct regmap *regmap; struct pwm_device *pwmd; + struct pwm_state pwmd_state; }; /* i2c access */ @@ -167,16 +168,19 @@ static int lm3630a_intr_config(struct lm3630a_chip *pchip) return rval; } -static void lm3630a_pwm_ctrl(struct lm3630a_chip *pchip, int br, int br_max) +static int lm3630a_pwm_ctrl(struct lm3630a_chip *pchip, int br, int br_max) { - unsigned int period = pchip->pdata->pwm_period; - unsigned int duty = br * period / br_max; + int err; - pwm_config(pchip->pwmd, duty, period); - if (duty) - pwm_enable(pchip->pwmd); - else - pwm_disable(pchip->pwmd); + pchip->pwmd_state.period = pchip->pdata->pwm_period; + + err = pwm_set_relative_duty_cycle(&pchip->pwmd_state, br, br_max); + if (err) + return err; + + pchip->pwmd_state.enabled = pchip->pwmd_state.duty_cycle ? true : false; + + return pwm_apply_state(pchip->pwmd, &pchip->pwmd_state); } /* update and get brightness */ @@ -187,11 +191,9 @@ static int lm3630a_bank_a_update_status(struct backlight_device *bl) enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl; /* pwm control */ - if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0) { - lm3630a_pwm_ctrl(pchip, bl->props.brightness, - bl->props.max_brightness); - return 0; - } + if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0) + return lm3630a_pwm_ctrl(pchip, bl->props.brightness, + bl->props.max_brightness); /* disable sleep */ ret = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00); @@ -264,11 +266,9 @@ static int lm3630a_bank_b_update_status(struct backlight_device *bl) enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl; /* pwm control */ - if ((pwm_ctrl & LM3630A_PWM_BANK_B) != 0) { - lm3630a_pwm_ctrl(pchip, bl->props.brightness, - bl->props.max_brightness); - return 0; - } + if ((pwm_ctrl & LM3630A_PWM_BANK_B) != 0) + return lm3630a_pwm_ctrl(pchip, bl->props.brightness, + bl->props.max_brightness); /* disable sleep */ ret = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00); @@ -563,11 +563,7 @@ static int lm3630a_probe(struct i2c_client *client, return PTR_ERR(pchip->pwmd); } - /* - * FIXME: pwm_apply_args() should be removed when switching to - * the atomic PWM API. - */ - pwm_apply_args(pchip->pwmd); + pwm_init_state(pchip->pwmd, &pchip->pwmd_state); } /* interrupt enable : irq 0 is not allowed */ -- 2.30.2 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v3 2/2] backlight: lm3630a: convert to atomic PWM API and check for errors 2021-06-21 12:21 ` [PATCH v3 2/2] backlight: lm3630a: convert to atomic PWM API and check for errors Uwe Kleine-König @ 2021-06-21 13:14 ` Daniel Thompson 2021-06-22 13:12 ` Lee Jones 1 sibling, 0 replies; 9+ messages in thread From: Daniel Thompson @ 2021-06-21 13:14 UTC (permalink / raw) To: Uwe Kleine-König Cc: Lee Jones, Jingoo Han, linux-fbdev, Thierry Reding, dri-devel, kernel On Mon, Jun 21, 2021 at 02:21:48PM +0200, Uwe Kleine-König wrote: > The practical upside here is that this only needs a single API call to > program the hardware which (depending on the underlaying hardware) can > be more effective and prevents glitches. > > Up to now the return value of the pwm functions was ignored. Fix this > and propagate the error to the caller. > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Daniel. > --- > drivers/video/backlight/lm3630a_bl.c | 42 +++++++++++++--------------- > 1 file changed, 19 insertions(+), 23 deletions(-) > > diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c > index 7140b0d98082..f377dfdd9868 100644 > --- a/drivers/video/backlight/lm3630a_bl.c > +++ b/drivers/video/backlight/lm3630a_bl.c > @@ -52,6 +52,7 @@ struct lm3630a_chip { > struct gpio_desc *enable_gpio; > struct regmap *regmap; > struct pwm_device *pwmd; > + struct pwm_state pwmd_state; > }; > > /* i2c access */ > @@ -167,16 +168,19 @@ static int lm3630a_intr_config(struct lm3630a_chip *pchip) > return rval; > } > > -static void lm3630a_pwm_ctrl(struct lm3630a_chip *pchip, int br, int br_max) > +static int lm3630a_pwm_ctrl(struct lm3630a_chip *pchip, int br, int br_max) > { > - unsigned int period = pchip->pdata->pwm_period; > - unsigned int duty = br * period / br_max; > + int err; > > - pwm_config(pchip->pwmd, duty, period); > - if (duty) > - pwm_enable(pchip->pwmd); > - else > - pwm_disable(pchip->pwmd); > + pchip->pwmd_state.period = pchip->pdata->pwm_period; > + > + err = pwm_set_relative_duty_cycle(&pchip->pwmd_state, br, br_max); > + if (err) > + return err; > + > + pchip->pwmd_state.enabled = pchip->pwmd_state.duty_cycle ? true : false; > + > + return pwm_apply_state(pchip->pwmd, &pchip->pwmd_state); > } > > /* update and get brightness */ > @@ -187,11 +191,9 @@ static int lm3630a_bank_a_update_status(struct backlight_device *bl) > enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl; > > /* pwm control */ > - if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0) { > - lm3630a_pwm_ctrl(pchip, bl->props.brightness, > - bl->props.max_brightness); > - return 0; > - } > + if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0) > + return lm3630a_pwm_ctrl(pchip, bl->props.brightness, > + bl->props.max_brightness); > > /* disable sleep */ > ret = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00); > @@ -264,11 +266,9 @@ static int lm3630a_bank_b_update_status(struct backlight_device *bl) > enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl; > > /* pwm control */ > - if ((pwm_ctrl & LM3630A_PWM_BANK_B) != 0) { > - lm3630a_pwm_ctrl(pchip, bl->props.brightness, > - bl->props.max_brightness); > - return 0; > - } > + if ((pwm_ctrl & LM3630A_PWM_BANK_B) != 0) > + return lm3630a_pwm_ctrl(pchip, bl->props.brightness, > + bl->props.max_brightness); > > /* disable sleep */ > ret = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00); > @@ -563,11 +563,7 @@ static int lm3630a_probe(struct i2c_client *client, > return PTR_ERR(pchip->pwmd); > } > > - /* > - * FIXME: pwm_apply_args() should be removed when switching to > - * the atomic PWM API. > - */ > - pwm_apply_args(pchip->pwmd); > + pwm_init_state(pchip->pwmd, &pchip->pwmd_state); > } > > /* interrupt enable : irq 0 is not allowed */ > -- > 2.30.2 > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v3 2/2] backlight: lm3630a: convert to atomic PWM API and check for errors 2021-06-21 12:21 ` [PATCH v3 2/2] backlight: lm3630a: convert to atomic PWM API and check for errors Uwe Kleine-König 2021-06-21 13:14 ` Daniel Thompson @ 2021-06-22 13:12 ` Lee Jones 2021-06-24 20:10 ` Uwe Kleine-König 1 sibling, 1 reply; 9+ messages in thread From: Lee Jones @ 2021-06-22 13:12 UTC (permalink / raw) To: Uwe Kleine-König Cc: Daniel Thompson, Jingoo Han, linux-fbdev, Thierry Reding, dri-devel, kernel On Mon, 21 Jun 2021, Uwe Kleine-König wrote: > The practical upside here is that this only needs a single API call to > program the hardware which (depending on the underlaying hardware) can > be more effective and prevents glitches. > > Up to now the return value of the pwm functions was ignored. Fix this > and propagate the error to the caller. > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> > --- > drivers/video/backlight/lm3630a_bl.c | 42 +++++++++++++--------------- > 1 file changed, 19 insertions(+), 23 deletions(-) Fixed the subject line and applied, thanks. -- Lee Jones [李琼斯] Senior Technical Lead - Developer Services Linaro.org │ Open source software for Arm SoCs Follow Linaro: Facebook | Twitter | Blog ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v3 2/2] backlight: lm3630a: convert to atomic PWM API and check for errors 2021-06-22 13:12 ` Lee Jones @ 2021-06-24 20:10 ` Uwe Kleine-König 2021-06-25 8:44 ` Lee Jones 0 siblings, 1 reply; 9+ messages in thread From: Uwe Kleine-König @ 2021-06-24 20:10 UTC (permalink / raw) To: Lee Jones Cc: Daniel Thompson, Jingoo Han, linux-fbdev, dri-devel, Thierry Reding, kernel [-- Attachment #1: Type: text/plain, Size: 1208 bytes --] Hi Lee, On Tue, Jun 22, 2021 at 02:12:57PM +0100, Lee Jones wrote: > On Mon, 21 Jun 2021, Uwe Kleine-König wrote: > > > The practical upside here is that this only needs a single API call to > > program the hardware which (depending on the underlaying hardware) can > > be more effective and prevents glitches. > > > > Up to now the return value of the pwm functions was ignored. Fix this > > and propagate the error to the caller. > > > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> > > --- > > drivers/video/backlight/lm3630a_bl.c | 42 +++++++++++++--------------- > > 1 file changed, 19 insertions(+), 23 deletions(-) > > Fixed the subject line and applied, thanks. It's not obvious to me what needed fixing here, and I don't find where you the patches, neither in next nor in https://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight.git; so I cannot check what you actually changed. I assume you did s/lm3630a/lm3630a_bl/ ? I didn't because it felt tautological. Best regards Uwe -- Pengutronix e.K. | Uwe Kleine-König | Industrial Linux Solutions | https://www.pengutronix.de/ | [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v3 2/2] backlight: lm3630a: convert to atomic PWM API and check for errors 2021-06-24 20:10 ` Uwe Kleine-König @ 2021-06-25 8:44 ` Lee Jones 0 siblings, 0 replies; 9+ messages in thread From: Lee Jones @ 2021-06-25 8:44 UTC (permalink / raw) To: Uwe Kleine-König Cc: Daniel Thompson, Jingoo Han, linux-fbdev, dri-devel, Thierry Reding, kernel On Thu, 24 Jun 2021, Uwe Kleine-König wrote: > Hi Lee, > > On Tue, Jun 22, 2021 at 02:12:57PM +0100, Lee Jones wrote: > > On Mon, 21 Jun 2021, Uwe Kleine-König wrote: > > > > > The practical upside here is that this only needs a single API call to > > > program the hardware which (depending on the underlaying hardware) can > > > be more effective and prevents glitches. > > > > > > Up to now the return value of the pwm functions was ignored. Fix this > > > and propagate the error to the caller. > > > > > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> > > > --- > > > drivers/video/backlight/lm3630a_bl.c | 42 +++++++++++++--------------- > > > 1 file changed, 19 insertions(+), 23 deletions(-) > > > > Fixed the subject line and applied, thanks. > > It's not obvious to me what needed fixing here, and I don't find where > you the patches, neither in next nor in > https://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight.git; so I > cannot check what you actually changed. > > I assume you did s/lm3630a/lm3630a_bl/ ? I didn't because it felt > tautological. No, but perhaps I should have. Format goes: <backlight>: <driver_file_name>: <Subject starting with uppercase> Where <driver_file_name> has the file extension removed. -- Lee Jones [李琼斯] Senior Technical Lead - Developer Services Linaro.org │ Open source software for Arm SoCs Follow Linaro: Facebook | Twitter | Blog ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2021-06-25 8:44 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-06-21 12:21 [PATCH v3 0/2] backlight: lm3630a: convert to atomic PWM API Uwe Kleine-König 2021-06-21 12:21 ` [PATCH v3 1/2] backlight: lm3630a: fix return code of .update_status() callback Uwe Kleine-König 2021-06-21 13:06 ` Daniel Thompson 2021-06-22 13:11 ` Lee Jones 2021-06-21 12:21 ` [PATCH v3 2/2] backlight: lm3630a: convert to atomic PWM API and check for errors Uwe Kleine-König 2021-06-21 13:14 ` Daniel Thompson 2021-06-22 13:12 ` Lee Jones 2021-06-24 20:10 ` Uwe Kleine-König 2021-06-25 8:44 ` Lee Jones
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).