[PATCH AUTOSEL 5.1 078/219] gpio: omap: fix lack of irqstatus_raw0 for OMAP4

[PATCH AUTOSEL 5.1 078/219] gpio: omap: fix lack of irqstatus_raw0 for OMAP4

[Sasha Levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 64ea3e9094a1f13b96c33244a3fb3a0f45690bd2 ]

Commit 384ebe1c2849 ("gpio/omap: Add DT support to GPIO driver") added
the register definition tables to the gpio-omap driver. Subsequently to
that commit, commit 4e962e8998cc ("gpio/omap: remove cpu_is_omapxxxx()
checks from *_runtime_resume()") added definitions for irqstatus_raw*
registers to the legacy OMAP4 definitions, but missed the DT
definitions.

This causes an unintentional change of behaviour for the 1.101 errata
workaround on OMAP4 platforms. Fix this oversight.

Fixes: 4e962e8998cc ("gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume()")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-omap.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index fafd79438bbf..0708e50a27f0 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -1728,6 +1728,8 @@ static struct omap_gpio_reg_offs omap4_gpio_regs = {
 	.clr_dataout =		OMAP4_GPIO_CLEARDATAOUT,
 	.irqstatus =		OMAP4_GPIO_IRQSTATUS0,
 	.irqstatus2 =		OMAP4_GPIO_IRQSTATUS1,
+	.irqstatus_raw0 =	OMAP4_GPIO_IRQSTATUSRAW0,
+	.irqstatus_raw1 =	OMAP4_GPIO_IRQSTATUSRAW1,
 	.irqenable =		OMAP4_GPIO_IRQSTATUSSET0,
 	.irqenable2 =		OMAP4_GPIO_IRQSTATUSSET1,
 	.set_irqenable =	OMAP4_GPIO_IRQSTATUSSET0,
-- 
2.20.1

[PATCH AUTOSEL 5.1 079/219] gpio: omap: ensure irq is enabled before wakeup

[Sasha Levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit c859e0d479b3b4f6132fc12637c51e01492f31f6 ]

Documentation states:

  NOTE: There must be a correlation between the wake-up enable and
  interrupt-enable registers. If a GPIO pin has a wake-up configured
  on it, it must also have the corresponding interrupt enabled (on
  one of the two interrupt lines).

Ensure that this condition is always satisfied by enabling the detection
events after enabling the interrupt, and disabling the detection before
disabling the interrupt.  This ensures interrupt/wakeup events can not
happen until both the wakeup and interrupt enables correlate.

If we do any clearing, clear between the interrupt enable/disable and
trigger setting.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-omap.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 0708e50a27f0..233245bc693c 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -838,9 +838,9 @@ static void omap_gpio_irq_shutdown(struct irq_data *d)
 
 	raw_spin_lock_irqsave(&bank->lock, flags);
 	bank->irq_usage &= ~(BIT(offset));
-	omap_set_gpio_irqenable(bank, offset, 0);
-	omap_clear_gpio_irqstatus(bank, offset);
 	omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
+	omap_clear_gpio_irqstatus(bank, offset);
+	omap_set_gpio_irqenable(bank, offset, 0);
 	if (!LINE_USED(bank->mod_usage, offset))
 		omap_clear_gpio_debounce(bank, offset);
 	omap_disable_gpio_module(bank, offset);
@@ -876,8 +876,8 @@ static void omap_gpio_mask_irq(struct irq_data *d)
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&bank->lock, flags);
-	omap_set_gpio_irqenable(bank, offset, 0);
 	omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
+	omap_set_gpio_irqenable(bank, offset, 0);
 	raw_spin_unlock_irqrestore(&bank->lock, flags);
 }
 
@@ -889,9 +889,6 @@ static void omap_gpio_unmask_irq(struct irq_data *d)
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&bank->lock, flags);
-	if (trigger)
-		omap_set_gpio_triggering(bank, offset, trigger);
-
 	omap_set_gpio_irqenable(bank, offset, 1);
 
 	/*
@@ -899,9 +896,13 @@ static void omap_gpio_unmask_irq(struct irq_data *d)
 	 * is cleared, thus after the handler has run. OMAP4 needs this done
 	 * after enabing the interrupt to clear the wakeup status.
 	 */
-	if (bank->level_mask & BIT(offset))
+	if (bank->regs->leveldetect0 && bank->regs->wkup_en &&
+	    trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
 		omap_clear_gpio_irqstatus(bank, offset);
 
+	if (trigger)
+		omap_set_gpio_triggering(bank, offset, trigger);
+
 	raw_spin_unlock_irqrestore(&bank->lock, flags);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.1 081/219] gpio: omap: Fix lost edge wake-up interrupts

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit a522f1d0c381c42f3ace13b8bbeeccabdd6d2e5c ]

If an edge interrupt triggers while entering idle just before we save
GPIO datain register to saved_datain, the triggered GPIO will not be
noticed on wake-up. This is because the saved_datain and GPIO datain
are the same on wake-up in omap_gpio_unidle(). Let's fix this by
ignoring any pending edge interrupts for saved_datain.

This issue affects only idle states where the GPIO module internal
wake-up path is operational. For deeper idle states where the GPIO
module gets powered off, Linux generic wakeirqs must be used for
the padconf wake-up events with pinctrl-single driver. For examples,
please see "interrupts-extended" dts usage in many drivers.

This issue can be somewhat easily reproduced by pinging an idle system
with smsc911x Ethernet interface configured IRQ_TYPE_EDGE_FALLING. At
some point the smsc911x interrupts will just stop triggering. Also if
WLCORE WLAN is used with EDGE interrupt like it's documentation specifies,
we can see lost interrupts without this patch.

Note that in the long run we may be able to cancel entering idle by
returning an error in gpio_omap_cpu_notifier() on pending interrupts.
But let's fix the bug first.

Also note that because of the recent clean-up efforts this patch does
not apply directly to older kernels. This does fix a long term issue
though, and can be backported as needed.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-omap.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 233245bc693c..1ddc872b4e4b 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -1455,7 +1455,7 @@ static void omap_gpio_idle(struct gpio_bank *bank, bool may_lose_context)
 {
 	struct device *dev = bank->chip.parent;
 	void __iomem *base = bank->base;
-	u32 nowake;
+	u32 mask, nowake;
 
 	bank->saved_datain = readl_relaxed(base + bank->regs->datain);
 
@@ -1465,6 +1465,16 @@ static void omap_gpio_idle(struct gpio_bank *bank, bool may_lose_context)
 	if (!bank->enabled_non_wakeup_gpios)
 		goto update_gpio_context_count;
 
+	/* Check for pending EDGE_FALLING, ignore EDGE_BOTH */
+	mask = bank->enabled_non_wakeup_gpios & bank->context.fallingdetect;
+	mask &= ~bank->context.risingdetect;
+	bank->saved_datain |= mask;
+
+	/* Check for pending EDGE_RISING, ignore EDGE_BOTH */
+	mask = bank->enabled_non_wakeup_gpios & bank->context.risingdetect;
+	mask &= ~bank->context.fallingdetect;
+	bank->saved_datain &= ~mask;
+
 	if (!may_lose_context)
 		goto update_gpio_context_count;
 
-- 
2.20.1

[PATCH AUTOSEL 5.1 158/219] gpio: Fix return value mismatch of function gpiod_get_from_of_node()

[Sasha Levin]

From: Waibel Georg <Georg.Waibel@sensor-technik.de>

[ Upstream commit 025bf37725f1929542361eef2245df30badf242e ]

In case the requested gpio property is not found in the device tree, some
callers of gpiod_get_from_of_node() expect a return value of NULL, others
expect -ENOENT.
In particular devm_fwnode_get_index_gpiod_from_child() expects -ENOENT.
Currently it gets a NULL, which breaks the loop that tries all
gpio_suffixes. The result is that a gpio property is not found, even
though it is there.

This patch changes gpiod_get_from_of_node() to return -ENOENT instead
of NULL when the requested gpio property is not found in the device
tree. Additionally it modifies all calling functions to properly
evaluate the return value.

Another approach would be to leave the return value of
gpiod_get_from_of_node() as is and fix the bug in
devm_fwnode_get_index_gpiod_from_child(). Other callers would still need
to be reworked. The effort would be the same as with the chosen solution.

Signed-off-by: Georg Waibel <georg.waibel@sensor-technik.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpiolib.c                 | 6 +-----
 drivers/regulator/da9211-regulator.c   | 2 ++
 drivers/regulator/s2mps11.c            | 4 +++-
 drivers/regulator/s5m8767.c            | 4 +++-
 drivers/regulator/tps65090-regulator.c | 7 ++++---
 5 files changed, 13 insertions(+), 10 deletions(-)

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index bca3e7740ef6..fd1344056e1d 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -4232,8 +4232,7 @@ EXPORT_SYMBOL_GPL(gpiod_get_index);
  *
  * Returns:
  * On successful request the GPIO pin is configured in accordance with
- * provided @dflags. If the node does not have the requested GPIO
- * property, NULL is returned.
+ * provided @dflags.
  *
  * In case of error an ERR_PTR() is returned.
  */
@@ -4255,9 +4254,6 @@ struct gpio_desc *gpiod_get_from_of_node(struct device_node *node,
 					index, &flags);
 
 	if (!desc || IS_ERR(desc)) {
-		/* If it is not there, just return NULL */
-		if (PTR_ERR(desc) == -ENOENT)
-			return NULL;
 		return desc;
 	}
 
diff --git a/drivers/regulator/da9211-regulator.c b/drivers/regulator/da9211-regulator.c
index 4d7fe4819c1c..4e95e3d0fcd5 100644
--- a/drivers/regulator/da9211-regulator.c
+++ b/drivers/regulator/da9211-regulator.c
@@ -299,6 +299,8 @@ static struct da9211_pdata *da9211_parse_regulators_dt(
 				  0,
 				  GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE,
 				  "da9211-enable");
+		if (IS_ERR(pdata->gpiod_ren[n]))
+			pdata->gpiod_ren[n] = NULL;
 		n++;
 	}
 
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 134c62db36c5..b518a81f75a3 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -821,7 +821,9 @@ static void s2mps14_pmic_dt_parse_ext_control_gpio(struct platform_device *pdev,
 				0,
 				GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE,
 				"s2mps11-regulator");
-		if (IS_ERR(gpio[reg])) {
+		if (PTR_ERR(gpio[reg]) == -ENOENT)
+			gpio[reg] = NULL;
+		else if (IS_ERR(gpio[reg])) {
 			dev_err(&pdev->dev, "Failed to get control GPIO for %d/%s\n",
 				reg, rdata[reg].name);
 			continue;
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index bb9d1a083299..6ca27e9d5ef7 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -574,7 +574,9 @@ static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev,
 			0,
 			GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE,
 			"s5m8767");
-		if (IS_ERR(rdata->ext_control_gpiod))
+		if (PTR_ERR(rdata->ext_control_gpiod) == -ENOENT)
+			rdata->ext_control_gpiod = NULL;
+		else if (IS_ERR(rdata->ext_control_gpiod))
 			return PTR_ERR(rdata->ext_control_gpiod);
 
 		rdata->id = i;
diff --git a/drivers/regulator/tps65090-regulator.c b/drivers/regulator/tps65090-regulator.c
index 0614551796a1..f6466db57900 100644
--- a/drivers/regulator/tps65090-regulator.c
+++ b/drivers/regulator/tps65090-regulator.c
@@ -381,11 +381,12 @@ static struct tps65090_platform_data *tps65090_parse_dt_reg_data(
 								    "dcdc-ext-control-gpios", 0,
 								    gflags,
 								    "tps65090");
-			if (IS_ERR(rpdata->gpiod))
-				return ERR_CAST(rpdata->gpiod);
-			if (!rpdata->gpiod)
+			if (PTR_ERR(rpdata->gpiod) == -ENOENT) {
 				dev_err(&pdev->dev,
 					"could not find DCDC external control GPIO\n");
+				rpdata->gpiod = NULL;
+			} else if (IS_ERR(rpdata->gpiod))
+				return ERR_CAST(rpdata->gpiod);
 		}
 
 		if (of_property_read_u32(tps65090_matches[idx].of_node,
-- 
2.20.1

[PATCH AUTOSEL 5.1 200/219] gpiolib: Fix references to gpiod_[gs]et_*value_cansleep() variants

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 3285170f28a850638794cdfe712eb6d93e51e706 ]

Commit 372e722ea4dd4ca1 ("gpiolib: use descriptors internally") renamed
the functions to use a "gpiod" prefix, and commit 79a9becda8940deb
("gpiolib: export descriptor-based GPIO interface") introduced the "raw"
variants, but both changes forgot to update the comments.

Readd a similar reference to gpiod_set_value(), which was accidentally
removed by commit 1e77fc82110ac36f ("gpio: Add missing open drain/source
handling to gpiod_set_value_cansleep()").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20190701142738.25219-1-geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpiolib.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index fd1344056e1d..b8a5c1e3b99d 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -3012,7 +3012,7 @@ int gpiod_get_array_value_complex(bool raw, bool can_sleep,
 int gpiod_get_raw_value(const struct gpio_desc *desc)
 {
 	VALIDATE_DESC(desc);
-	/* Should be using gpio_get_value_cansleep() */
+	/* Should be using gpiod_get_raw_value_cansleep() */
 	WARN_ON(desc->gdev->chip->can_sleep);
 	return gpiod_get_raw_value_commit(desc);
 }
@@ -3033,7 +3033,7 @@ int gpiod_get_value(const struct gpio_desc *desc)
 	int value;
 
 	VALIDATE_DESC(desc);
-	/* Should be using gpio_get_value_cansleep() */
+	/* Should be using gpiod_get_value_cansleep() */
 	WARN_ON(desc->gdev->chip->can_sleep);
 
 	value = gpiod_get_raw_value_commit(desc);
@@ -3304,7 +3304,7 @@ int gpiod_set_array_value_complex(bool raw, bool can_sleep,
 void gpiod_set_raw_value(struct gpio_desc *desc, int value)
 {
 	VALIDATE_DESC_VOID(desc);
-	/* Should be using gpiod_set_value_cansleep() */
+	/* Should be using gpiod_set_raw_value_cansleep() */
 	WARN_ON(desc->gdev->chip->can_sleep);
 	gpiod_set_raw_value_commit(desc, value);
 }
@@ -3345,6 +3345,7 @@ static void gpiod_set_value_nocheck(struct gpio_desc *desc, int value)
 void gpiod_set_value(struct gpio_desc *desc, int value)
 {
 	VALIDATE_DESC_VOID(desc);
+	/* Should be using gpiod_set_value_cansleep() */
 	WARN_ON(desc->gdev->chip->can_sleep);
 	gpiod_set_value_nocheck(desc, value);
 }
-- 
2.20.1