Linux-GPIO Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] gpio: zx: Pass irqchip when adding gpiochip
@ 2019-08-09 13:38 Linus Walleij
  0 siblings, 0 replies; only message in thread
From: Linus Walleij @ 2019-08-09 13:38 UTC (permalink / raw)
  To: linux-gpio
  Cc: Bartosz Golaszewski, Linus Walleij, Jonas Gorski, Jun Nie,
	Thierry Reding

We need to convert all old gpio irqchips to pass the irqchip
setup along when adding the gpio_chip. For more info see
drivers/gpio/TODO.

For chained irqchips this is a pretty straight-forward
conversion.

Cc: Jonas Gorski <jogo@openwrt.org>
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/gpio/gpio-zx.c | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/gpio/gpio-zx.c b/drivers/gpio/gpio-zx.c
index 8d9b9bf8510a..98cbaf0e415e 100644
--- a/drivers/gpio/gpio-zx.c
+++ b/drivers/gpio/gpio-zx.c
@@ -215,6 +215,7 @@ static int zx_gpio_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct zx_gpio *chip;
+	struct gpio_irq_chip *girq;
 	int irq, id, ret;
 
 	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
@@ -242,31 +243,30 @@ static int zx_gpio_probe(struct platform_device *pdev)
 	chip->gc.parent = dev;
 	chip->gc.owner = THIS_MODULE;
 
-	ret = gpiochip_add_data(&chip->gc, chip);
-	if (ret)
-		return ret;
-
 	/*
 	 * irq_chip support
 	 */
 	writew_relaxed(0xffff, chip->base + ZX_GPIO_IM);
 	writew_relaxed(0, chip->base + ZX_GPIO_IE);
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		gpiochip_remove(&chip->gc);
-		return -ENODEV;
-	}
+	if (irq < 0)
+		return irq;
+	girq = &chip->gc.irq;
+	girq->chip = &zx_irqchip;
+	girq->parent_handler = zx_irq_handler;
+	girq->num_parents = 1;
+	girq->parents = devm_kcalloc(&pdev->dev, 1,
+				     sizeof(*girq->parents),
+				     GFP_KERNEL);
+	if (!girq->parents)
+		return -ENOMEM;
+	girq->parents[0] = irq;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_simple_irq;
 
-	ret = gpiochip_irqchip_add(&chip->gc, &zx_irqchip,
-				   0, handle_simple_irq,
-				   IRQ_TYPE_NONE);
-	if (ret) {
-		dev_err(dev, "could not add irqchip\n");
-		gpiochip_remove(&chip->gc);
+	ret = gpiochip_add_data(&chip->gc, chip);
+	if (ret)
 		return ret;
-	}
-	gpiochip_set_chained_irqchip(&chip->gc, &zx_irqchip,
-				     irq, zx_irq_handler);
 
 	platform_set_drvdata(pdev, chip);
 	dev_info(dev, "ZX GPIO chip registered\n");
-- 
2.21.0


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-09 13:38 [PATCH] gpio: zx: Pass irqchip when adding gpiochip Linus Walleij

Linux-GPIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-gpio/0 linux-gpio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-gpio linux-gpio/ https://lore.kernel.org/linux-gpio \
		linux-gpio@vger.kernel.org linux-gpio@archiver.kernel.org
	public-inbox-index linux-gpio


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-gpio


AGPL code for this site: git clone https://public-inbox.org/ public-inbox