Linux-GPIO Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v3 0/3] Add DA9062 GPIO support
@ 2019-11-29 16:58 Marco Felsch
  2019-11-29 16:58 ` [PATCH v3 1/3] dt-bindings: mfd: da9062: add gpio bindings Marco Felsch
                   ` (3 more replies)
  0 siblings, 4 replies; 8+ messages in thread
From: Marco Felsch @ 2019-11-29 16:58 UTC (permalink / raw)
  To: linus.walleij, bgolaszewski, robh+dt, support.opensource,
	Adam.Thomson.Opensource
  Cc: devicetree, kernel, linux-gpio

Hi,

this update address all comments made on [1], for further details see
the patch based changelog.

[1] https://patchwork.ozlabs.org/cover/1201549/

Marco Felsch (3):
  dt-bindings: mfd: da9062: add gpio bindings
  mfd: da9062: add support for the DA9062 GPIOs in the core
  pinctrl: da9062: add driver support

 .../devicetree/bindings/mfd/da9062.txt        |  10 +
 MAINTAINERS                                   |   1 +
 drivers/mfd/da9062-core.c                     |  16 +-
 drivers/pinctrl/Kconfig                       |  12 +
 drivers/pinctrl/Makefile                      |   1 +
 drivers/pinctrl/pinctrl-da9062.c              | 297 ++++++++++++++++++
 6 files changed, 336 insertions(+), 1 deletion(-)
 create mode 100644 drivers/pinctrl/pinctrl-da9062.c

-- 
2.20.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, back to index

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-29 16:58 [PATCH v3 0/3] Add DA9062 GPIO support Marco Felsch
2019-11-29 16:58 ` [PATCH v3 1/3] dt-bindings: mfd: da9062: add gpio bindings Marco Felsch
2019-11-29 16:58 ` [PATCH v3 2/3] mfd: da9062: add support for the DA9062 GPIOs in the core Marco Felsch
2019-11-29 16:58 ` [PATCH v3 3/3] pinctrl: da9062: add driver support Marco Felsch
2019-12-10  9:51 ` [PATCH v3 0/3] Add DA9062 GPIO support Marco Felsch
2019-12-12 14:56   ` Linus Walleij
2019-12-12 15:48     ` Lee Jones
2019-12-12 15:49     ` Marco Felsch

Linux-GPIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-gpio/0 linux-gpio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-gpio linux-gpio/ https://lore.kernel.org/linux-gpio \
		linux-gpio@vger.kernel.org
	public-inbox-index linux-gpio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-gpio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git