[PATCH AUTOSEL 5.7 053/388] pinctrl: ocelot: Fix GPIO interrupt decoding on Jaguar2

[PATCH AUTOSEL 5.7 053/388] pinctrl: ocelot: Fix GPIO interrupt decoding on Jaguar2

[Sasha Levin]

From: Lars Povlsen <lars.povlsen@microchip.com>

[ Upstream commit 0b47afc65453a70bc521e251138418056f65793f ]

This fixes a problem with using the GPIO as an interrupt on Jaguar2
(and similar), as the register layout of the platforms with 64 GPIO's
are pairwise, such that the original offset must be multiplied with
the platform stride.

Fixes: da801ab56ad8 pinctrl: ocelot: add MSCC Jaguar2 support.
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Link: https://lore.kernel.org/r/20200513125532.24585-4-lars.povlsen@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-ocelot.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-ocelot.c b/drivers/pinctrl/pinctrl-ocelot.c
index ed8eac6c1494..4b99922d6c7e 100644
--- a/drivers/pinctrl/pinctrl-ocelot.c
+++ b/drivers/pinctrl/pinctrl-ocelot.c
@@ -714,11 +714,12 @@ static void ocelot_irq_handler(struct irq_desc *desc)
 	struct irq_chip *parent_chip = irq_desc_get_chip(desc);
 	struct gpio_chip *chip = irq_desc_get_handler_data(desc);
 	struct ocelot_pinctrl *info = gpiochip_get_data(chip);
+	unsigned int id_reg = OCELOT_GPIO_INTR_IDENT * info->stride;
 	unsigned int reg = 0, irq, i;
 	unsigned long irqs;
 
 	for (i = 0; i < info->stride; i++) {
-		regmap_read(info->map, OCELOT_GPIO_INTR_IDENT + 4 * i, &reg);
+		regmap_read(info->map, id_reg + 4 * i, &reg);
 		if (!reg)
 			continue;
 
-- 
2.25.1

[PATCH AUTOSEL 5.7 070/388] gpio: dwapb: Call acpi_gpiochip_free_interrupts() on GPIO chip de-registration

[Sasha Levin]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 494a94e38dcf62543a32a4424d646ff80b4b28bd ]

Add missed acpi_gpiochip_free_interrupts() call when unregistering ports.

While at it, drop extra check to call acpi_gpiochip_request_interrupts().
There is no need to have an additional check to call
acpi_gpiochip_request_interrupts(). Even without any interrupts available
the registered ACPI Event handlers can be useful for debugging purposes.

Fixes: e6cb3486f5a1 ("gpio: dwapb: add gpio-signaled acpi event support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20200519131233.59032-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-dwapb.c | 25 ++++++++++++++++---------
 1 file changed, 16 insertions(+), 9 deletions(-)

diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
index 92e127e74813..02cf4c43a4c4 100644
--- a/drivers/gpio/gpio-dwapb.c
+++ b/drivers/gpio/gpio-dwapb.c
@@ -533,26 +533,33 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
 		dwapb_configure_irqs(gpio, port, pp);
 
 	err = gpiochip_add_data(&port->gc, port);
-	if (err)
+	if (err) {
 		dev_err(gpio->dev, "failed to register gpiochip for port%d\n",
 			port->idx);
-	else
-		port->is_registered = true;
+		return err;
+	}
 
 	/* Add GPIO-signaled ACPI event support */
-	if (pp->has_irq)
-		acpi_gpiochip_request_interrupts(&port->gc);
+	acpi_gpiochip_request_interrupts(&port->gc);
 
-	return err;
+	port->is_registered = true;
+
+	return 0;
 }
 
 static void dwapb_gpio_unregister(struct dwapb_gpio *gpio)
 {
 	unsigned int m;
 
-	for (m = 0; m < gpio->nr_ports; ++m)
-		if (gpio->ports[m].is_registered)
-			gpiochip_remove(&gpio->ports[m].gc);
+	for (m = 0; m < gpio->nr_ports; ++m) {
+		struct dwapb_gpio_port *port = &gpio->ports[m];
+
+		if (!port->is_registered)
+			continue;
+
+		acpi_gpiochip_free_interrupts(&port->gc);
+		gpiochip_remove(&port->gc);
+	}
 }
 
 static struct dwapb_platform_data *
-- 
2.25.1

[PATCH AUTOSEL 5.7 125/388] gpio: dwapb: Append MODULE_ALIAS for platform driver

[Sasha Levin]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit c58220cba2e03618659fa7d5dfae31f5ad4ae9d0 ]

The commit 3d2613c4289f
  ("GPIO: gpio-dwapb: Enable platform driver binding to MFD driver")
introduced a use of the platform driver but missed to add the following line
to it:
  MODULE_ALIAS("platform:gpio-dwapb");

Add this to get driver loaded automatically if platform device is registered.

Fixes: 3d2613c4289f ("GPIO: gpio-dwapb: Enable platform driver binding to MFD driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20200415141534.31240-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-dwapb.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
index 02cf4c43a4c4..ed6061b5cca1 100644
--- a/drivers/gpio/gpio-dwapb.c
+++ b/drivers/gpio/gpio-dwapb.c
@@ -49,7 +49,9 @@
 #define GPIO_EXT_PORTC		0x58
 #define GPIO_EXT_PORTD		0x5c
 
+#define DWAPB_DRIVER_NAME	"gpio-dwapb"
 #define DWAPB_MAX_PORTS		4
+
 #define GPIO_EXT_PORT_STRIDE	0x04 /* register stride 32 bits */
 #define GPIO_SWPORT_DR_STRIDE	0x0c /* register stride 3*32 bits */
 #define GPIO_SWPORT_DDR_STRIDE	0x0c /* register stride 3*32 bits */
@@ -398,7 +400,7 @@ static void dwapb_configure_irqs(struct dwapb_gpio *gpio,
 		return;
 
 	err = irq_alloc_domain_generic_chips(gpio->domain, ngpio, 2,
-					     "gpio-dwapb", handle_level_irq,
+					     DWAPB_DRIVER_NAME, handle_level_irq,
 					     IRQ_NOREQUEST, 0,
 					     IRQ_GC_INIT_NESTED_LOCK);
 	if (err) {
@@ -455,7 +457,7 @@ static void dwapb_configure_irqs(struct dwapb_gpio *gpio,
 		 */
 		err = devm_request_irq(gpio->dev, pp->irq[0],
 				       dwapb_irq_handler_mfd,
-				       IRQF_SHARED, "gpio-dwapb-mfd", gpio);
+				       IRQF_SHARED, DWAPB_DRIVER_NAME, gpio);
 		if (err) {
 			dev_err(gpio->dev, "error requesting IRQ\n");
 			irq_domain_remove(gpio->domain);
@@ -843,7 +845,7 @@ static SIMPLE_DEV_PM_OPS(dwapb_gpio_pm_ops, dwapb_gpio_suspend,
 
 static struct platform_driver dwapb_gpio_driver = {
 	.driver		= {
-		.name	= "gpio-dwapb",
+		.name	= DWAPB_DRIVER_NAME,
 		.pm	= &dwapb_gpio_pm_ops,
 		.of_match_table = of_match_ptr(dwapb_of_match),
 		.acpi_match_table = ACPI_PTR(dwapb_acpi_match),
@@ -857,3 +859,4 @@ module_platform_driver(dwapb_gpio_driver);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Jamie Iles");
 MODULE_DESCRIPTION("Synopsys DesignWare APB GPIO driver");
+MODULE_ALIAS("platform:" DWAPB_DRIVER_NAME);
-- 
2.25.1

[PATCH AUTOSEL 5.7 129/388] pinctrl: rza1: Fix wrong array assignment of rza1l_swio_entries

[Sasha Levin]

From: Jason Yan <yanaijie@huawei.com>

[ Upstream commit 4b4e8e93eccc2abc4209fe226ec89e7fbe9f3c61 ]

The rza1l_swio_entries referred to the wrong array rza1h_swio_pins,
which was intended to be rza1l_swio_pins. So let's fix it.

This is detected by the following gcc warning:

drivers/pinctrl/pinctrl-rza1.c:401:35: warning: ‘rza1l_swio_pins’
defined but not used [-Wunused-const-variable=]
 static const struct rza1_swio_pin rza1l_swio_pins[] = {
                                   ^~~~~~~~~~~~~~~

Fixes: 039bc58e73b77723 ("pinctrl: rza1: Add support for RZ/A1L")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200417111604.19143-1-yanaijie@huawei.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-rza1.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-rza1.c b/drivers/pinctrl/pinctrl-rza1.c
index da2d8365c690..ff4a7fb518bb 100644
--- a/drivers/pinctrl/pinctrl-rza1.c
+++ b/drivers/pinctrl/pinctrl-rza1.c
@@ -418,7 +418,7 @@ static const struct rza1_bidir_entry rza1l_bidir_entries[RZA1_NPORTS] = {
 };
 
 static const struct rza1_swio_entry rza1l_swio_entries[] = {
-	[0] = { ARRAY_SIZE(rza1h_swio_pins), rza1h_swio_pins },
+	[0] = { ARRAY_SIZE(rza1l_swio_pins), rza1l_swio_pins },
 };
 
 /* RZ/A1L (r7s72102x) pinmux flags table */
-- 
2.25.1

[PATCH AUTOSEL 5.7 148/388] gpio: mlxbf2: fix return value check in mlxbf2_gpio_get_lock_res()

[Sasha Levin]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit 66d8ad67aab3bc6f55e7de81565cd0d4875bd851 ]

In case of error, the function devm_ioremap() returns NULL pointer not
ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200427110829.154785-1-weiyongjun1@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-mlxbf2.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-mlxbf2.c b/drivers/gpio/gpio-mlxbf2.c
index da570e63589d..cc0dd8593a4b 100644
--- a/drivers/gpio/gpio-mlxbf2.c
+++ b/drivers/gpio/gpio-mlxbf2.c
@@ -110,8 +110,8 @@ static int mlxbf2_gpio_get_lock_res(struct platform_device *pdev)
 	}
 
 	yu_arm_gpio_lock_param.io = devm_ioremap(dev, res->start, size);
-	if (IS_ERR(yu_arm_gpio_lock_param.io))
-		ret = PTR_ERR(yu_arm_gpio_lock_param.io);
+	if (!yu_arm_gpio_lock_param.io)
+		ret = -ENOMEM;
 
 exit:
 	mutex_unlock(yu_arm_gpio_lock_param.lock);
-- 
2.25.1

[PATCH AUTOSEL 5.7 154/388] gpio: pca953x: fix handling of automatic address incrementing

[Sasha Levin]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit bcf41dc480b179bfb669a232080a2e26dc7294b4 ]

Some of the chips supported by the pca953x driver need the most
significant bit in the address word set to automatically increment the
address pointer on subsequent reads and writes (example: PCA9505). With
this bit unset the same register is read multiple times on a multi-byte
read sequence. Other chips must not have this bit set and autoincrement
always (example: PCA9555).

Up to now this AI bit was interpreted to be part of the address, which
resulted in inconsistent regmap caching when a register was written with
AI set and then read without it. This happened for the PCA9505 in
pca953x_gpio_set_multiple() where pca953x_read_regs() bulk read from the
cache for registers 0x8-0xc and then wrote to registers 0x88-0x8c. (Side
note: reading 5 values from offset 0x8 yiels OP0 5 times because AI must
be set to get OP0-OP4, which is another bug that is resolved here as a
by-product.) The same problem happens when calls to gpio_set_value() and
gpio_set_array_value() were mixed.

With this patch the AI bit is always set for chips that support it. This
works as there are no code locations that make use of the behaviour with
AI unset (for the chips that support it).

Note that the call to pca953x_setup_gpio() had to be done a bit earlier
to make the NBANK macro work.

The history of this bug is a bit complicated. Commit b32cecb46bdc
("gpio: pca953x: Extract the register address mangling to single
function") changed which chips and functions are affected. Commit
3b00691cc46a ("gpio: pca953x: hack to fix 24 bit gpio expanders") used
some duct tape to make the driver at least appear to work. Commit
49427232764d ("gpio: pca953x: Perform basic regmap conversion")
introduced the caching. Commit b4818afeacbd ("gpio: pca953x: Add
set_multiple to allow multiple bits to be set in one write.") introduced
the .set_multiple() callback which didn't work for chips that need the
AI bit which was fixed later for some chips in 8958262af3fb ("gpio:
pca953x: Repair multi-byte IO address increment on PCA9575"). So I'm
sorry, I don't know which commit I should pick for a Fixes: line.

Tested-by: Marcel Gudert <m.gudert@eckelmann.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-pca953x.c | 44 +++++++++++++++++++++++--------------
 1 file changed, 28 insertions(+), 16 deletions(-)

diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 4269ea9a817e..01011a780688 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -307,8 +307,22 @@ static const struct regmap_config pca953x_i2c_regmap = {
 	.volatile_reg = pca953x_volatile_register,
 
 	.cache_type = REGCACHE_RBTREE,
-	/* REVISIT: should be 0x7f but some 24 bit chips use REG_ADDR_AI */
-	.max_register = 0xff,
+	.max_register = 0x7f,
+};
+
+static const struct regmap_config pca953x_ai_i2c_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.read_flag_mask = REG_ADDR_AI,
+	.write_flag_mask = REG_ADDR_AI,
+
+	.readable_reg = pca953x_readable_register,
+	.writeable_reg = pca953x_writeable_register,
+	.volatile_reg = pca953x_volatile_register,
+
+	.cache_type = REGCACHE_RBTREE,
+	.max_register = 0x7f,
 };
 
 static u8 pca953x_recalc_addr(struct pca953x_chip *chip, int reg, int off,
@@ -319,18 +333,6 @@ static u8 pca953x_recalc_addr(struct pca953x_chip *chip, int reg, int off,
 	int pinctrl = (reg & PCAL_PINCTRL_MASK) << 1;
 	u8 regaddr = pinctrl | addr | (off / BANK_SZ);
 
-	/* Single byte read doesn't need AI bit set. */
-	if (!addrinc)
-		return regaddr;
-
-	/* Chips with 24 and more GPIOs always support Auto Increment */
-	if (write && NBANK(chip) > 2)
-		regaddr |= REG_ADDR_AI;
-
-	/* PCA9575 needs address-increment on multi-byte writes */
-	if (PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE)
-		regaddr |= REG_ADDR_AI;
-
 	return regaddr;
 }
 
@@ -863,6 +865,7 @@ static int pca953x_probe(struct i2c_client *client,
 	int ret;
 	u32 invert = 0;
 	struct regulator *reg;
+	const struct regmap_config *regmap_config;
 
 	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
 	if (chip == NULL)
@@ -925,7 +928,17 @@ static int pca953x_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, chip);
 
-	chip->regmap = devm_regmap_init_i2c(client, &pca953x_i2c_regmap);
+	pca953x_setup_gpio(chip, chip->driver_data & PCA_GPIO_MASK);
+
+	if (NBANK(chip) > 2 || PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE) {
+		dev_info(&client->dev, "using AI\n");
+		regmap_config = &pca953x_ai_i2c_regmap;
+	} else {
+		dev_info(&client->dev, "using no AI\n");
+		regmap_config = &pca953x_i2c_regmap;
+	}
+
+	chip->regmap = devm_regmap_init_i2c(client, regmap_config);
 	if (IS_ERR(chip->regmap)) {
 		ret = PTR_ERR(chip->regmap);
 		goto err_exit;
@@ -956,7 +969,6 @@ static int pca953x_probe(struct i2c_client *client,
 	/* initialize cached registers from their original values.
 	 * we can't share this chip with another i2c master.
 	 */
-	pca953x_setup_gpio(chip, chip->driver_data & PCA_GPIO_MASK);
 
 	if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) {
 		chip->regs = &pca953x_regs;
-- 
2.25.1

[PATCH AUTOSEL 5.7 196/388] pinctrl: rockchip: fix memleak in rockchip_dt_node_to_map

[Sasha Levin]

From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>

[ Upstream commit d7faa8ffb6be57bf8233a4b5a636d76b83c51ce7 ]

In function rockchip_dt_node_to_map, a new_map variable is
allocated by:

new_map = devm_kcalloc(pctldev->dev, map_num, sizeof(*new_map),
		       GFP_KERNEL);

This uses devres and attaches new_map to the pinctrl driver.
This cause a leak since new_map is not released when the probed
driver is removed. Fix it by using kcalloc to allocate new_map
and free it in `rockchip_dt_free_map`

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20200506100903.15420-1-dafna.hirschfeld@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-rockchip.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index 098951346339..d7869b636889 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -508,8 +508,8 @@ static int rockchip_dt_node_to_map(struct pinctrl_dev *pctldev,
 	}
 
 	map_num += grp->npins;
-	new_map = devm_kcalloc(pctldev->dev, map_num, sizeof(*new_map),
-								GFP_KERNEL);
+
+	new_map = kcalloc(map_num, sizeof(*new_map), GFP_KERNEL);
 	if (!new_map)
 		return -ENOMEM;
 
@@ -519,7 +519,7 @@ static int rockchip_dt_node_to_map(struct pinctrl_dev *pctldev,
 	/* create mux map */
 	parent = of_get_parent(np);
 	if (!parent) {
-		devm_kfree(pctldev->dev, new_map);
+		kfree(new_map);
 		return -EINVAL;
 	}
 	new_map[0].type = PIN_MAP_TYPE_MUX_GROUP;
@@ -546,6 +546,7 @@ static int rockchip_dt_node_to_map(struct pinctrl_dev *pctldev,
 static void rockchip_dt_free_map(struct pinctrl_dev *pctldev,
 				    struct pinctrl_map *map, unsigned num_maps)
 {
+	kfree(map);
 }
 
 static const struct pinctrl_ops rockchip_pctrl_ops = {
-- 
2.25.1

[PATCH AUTOSEL 5.7 215/388] pinctrl: ocelot: Always register GPIO driver

[Sasha Levin]

From: Lars Povlsen <lars.povlsen@microchip.com>

[ Upstream commit 550713e33f4338c8596776828a936fd1e3bf35de ]

This fixes the situation where the GPIO controller is not
used as an interrupt controller as well.

Previously, the driver would silently fail to register even the
GPIO's. With this change, the driver will only register as an
interrupt controller if a parent interrupt is provided.

Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Link: https://lore.kernel.org/r/20200513125532.24585-2-lars.povlsen@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-ocelot.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-ocelot.c b/drivers/pinctrl/pinctrl-ocelot.c
index 4b99922d6c7e..b1bf46ec207f 100644
--- a/drivers/pinctrl/pinctrl-ocelot.c
+++ b/drivers/pinctrl/pinctrl-ocelot.c
@@ -752,21 +752,21 @@ static int ocelot_gpiochip_register(struct platform_device *pdev,
 	gc->of_node = info->dev->of_node;
 	gc->label = "ocelot-gpio";
 
-	irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
-	if (irq <= 0)
-		return irq;
-
-	girq = &gc->irq;
-	girq->chip = &ocelot_irqchip;
-	girq->parent_handler = ocelot_irq_handler;
-	girq->num_parents = 1;
-	girq->parents = devm_kcalloc(&pdev->dev, 1, sizeof(*girq->parents),
-				     GFP_KERNEL);
-	if (!girq->parents)
-		return -ENOMEM;
-	girq->parents[0] = irq;
-	girq->default_type = IRQ_TYPE_NONE;
-	girq->handler = handle_edge_irq;
+	irq = irq_of_parse_and_map(gc->of_node, 0);
+	if (irq) {
+		girq = &gc->irq;
+		girq->chip = &ocelot_irqchip;
+		girq->parent_handler = ocelot_irq_handler;
+		girq->num_parents = 1;
+		girq->parents = devm_kcalloc(&pdev->dev, 1,
+					     sizeof(*girq->parents),
+					     GFP_KERNEL);
+		if (!girq->parents)
+			return -ENOMEM;
+		girq->parents[0] = irq;
+		girq->default_type = IRQ_TYPE_NONE;
+		girq->handler = handle_edge_irq;
+	}
 
 	ret = devm_gpiochip_add_data(&pdev->dev, gc, info);
 	if (ret)
-- 
2.25.1

[PATCH AUTOSEL 5.7 269/388] pinctrl: Fix return value about devm_platform_ioremap_resource()

[Sasha Levin]

From: Tiezhu Yang <yangtiezhu@loongson.cn>

[ Upstream commit b5d9ff10dca49f4d4b7846c3751c6bec50d07375 ]

When call function devm_platform_ioremap_resource(), we should use IS_ERR()
to check the return value and return PTR_ERR() if failed.

Fixes: 4b024225c4a8 ("pinctrl: use devm_platform_ioremap_resource() to simplify code")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1590234326-2194-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/bcm/pinctrl-bcm281xx.c | 2 +-
 drivers/pinctrl/pinctrl-at91-pio4.c    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/bcm/pinctrl-bcm281xx.c b/drivers/pinctrl/bcm/pinctrl-bcm281xx.c
index f690fc5cd688..71e666178300 100644
--- a/drivers/pinctrl/bcm/pinctrl-bcm281xx.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm281xx.c
@@ -1406,7 +1406,7 @@ static int __init bcm281xx_pinctrl_probe(struct platform_device *pdev)
 	pdata->reg_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(pdata->reg_base)) {
 		dev_err(&pdev->dev, "Failed to ioremap MEM resource\n");
-		return -ENODEV;
+		return PTR_ERR(pdata->reg_base);
 	}
 
 	/* Initialize the dynamic part of pinctrl_desc */
diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
index 694912409fd9..54222ccddfb1 100644
--- a/drivers/pinctrl/pinctrl-at91-pio4.c
+++ b/drivers/pinctrl/pinctrl-at91-pio4.c
@@ -1019,7 +1019,7 @@ static int atmel_pinctrl_probe(struct platform_device *pdev)
 
 	atmel_pioctrl->reg_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(atmel_pioctrl->reg_base))
-		return -EINVAL;
+		return PTR_ERR(atmel_pioctrl->reg_base);
 
 	atmel_pioctrl->clk = devm_clk_get(dev, NULL);
 	if (IS_ERR(atmel_pioctrl->clk)) {
-- 
2.25.1

[PATCH AUTOSEL 5.7 323/388] pinctrl: imxl: Fix an error handling path in 'imx1_pinctrl_core_probe()'

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 9eb728321286c4b31e964d2377fca2368526d408 ]

When 'pinctrl_register()' has been turned into 'devm_pinctrl_register()',
an error handling path has not been updated.

Axe a now unneeded 'pinctrl_unregister()'.

Fixes: e55e025d1687 ("pinctrl: imxl: Use devm_pinctrl_register() for pinctrl registration")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20200530201952.585798-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/freescale/pinctrl-imx1-core.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/pinctrl/freescale/pinctrl-imx1-core.c b/drivers/pinctrl/freescale/pinctrl-imx1-core.c
index c00d0022d311..421f7d1886e5 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx1-core.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx1-core.c
@@ -638,7 +638,6 @@ int imx1_pinctrl_core_probe(struct platform_device *pdev,
 
 	ret = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
 	if (ret) {
-		pinctrl_unregister(ipctl->pctl);
 		dev_err(&pdev->dev, "Failed to populate subdevices\n");
 		return ret;
 	}
-- 
2.25.1

[PATCH AUTOSEL 5.7 324/388] pinctrl: sirf: add missing put_device() call in sirfsoc_gpio_probe()

[Sasha Levin]

From: yu kuai <yukuai3@huawei.com>

[ Upstream commit 66339f2fba3fa05b0507e1887e4c6abcfc6228a3 ]

A coccicheck run provided information like the following:

drivers/pinctrl/sirf/pinctrl-sirf.c:798:2-8: ERROR: missing put_device;
call of_find_device_by_node on line 792, but without a corresponding
object release within this function.

Generated by: scripts/coccinelle/free/put_device.cocci

Thus add a jump target to fix the exception handling for this
function implementation.

Fixes: 5130216265f6 ("PINCTRL: SiRF: add GPIO and GPIO irq support in CSR SiRFprimaII")
Signed-off-by: yu kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20200603013532.755220-1-yukuai3@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/sirf/pinctrl-sirf.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/pinctrl/sirf/pinctrl-sirf.c b/drivers/pinctrl/sirf/pinctrl-sirf.c
index 1ebcb957c654..63a287d5795f 100644
--- a/drivers/pinctrl/sirf/pinctrl-sirf.c
+++ b/drivers/pinctrl/sirf/pinctrl-sirf.c
@@ -794,13 +794,17 @@ static int sirfsoc_gpio_probe(struct device_node *np)
 		return -ENODEV;
 
 	sgpio = devm_kzalloc(&pdev->dev, sizeof(*sgpio), GFP_KERNEL);
-	if (!sgpio)
-		return -ENOMEM;
+	if (!sgpio) {
+		err = -ENOMEM;
+		goto out_put_device;
+	}
 	spin_lock_init(&sgpio->lock);
 
 	regs = of_iomap(np, 0);
-	if (!regs)
-		return -ENOMEM;
+	if (!regs) {
+		err = -ENOMEM;
+		goto out_put_device;
+	}
 
 	sgpio->chip.gc.request = sirfsoc_gpio_request;
 	sgpio->chip.gc.free = sirfsoc_gpio_free;
@@ -824,8 +828,10 @@ static int sirfsoc_gpio_probe(struct device_node *np)
 	girq->parents = devm_kcalloc(&pdev->dev, SIRFSOC_GPIO_NO_OF_BANKS,
 				     sizeof(*girq->parents),
 				     GFP_KERNEL);
-	if (!girq->parents)
-		return -ENOMEM;
+	if (!girq->parents) {
+		err = -ENOMEM;
+		goto out_put_device;
+	}
 	for (i = 0; i < SIRFSOC_GPIO_NO_OF_BANKS; i++) {
 		bank = &sgpio->sgpio_bank[i];
 		spin_lock_init(&bank->lock);
@@ -868,6 +874,8 @@ static int sirfsoc_gpio_probe(struct device_node *np)
 	gpiochip_remove(&sgpio->chip.gc);
 out:
 	iounmap(regs);
+out_put_device:
+	put_device(&pdev->dev);
 	return err;
 }
 
-- 
2.25.1

[PATCH AUTOSEL 5.7 325/388] pinctrl: freescale: imx: Fix an error handling path in 'imx_pinctrl_probe()'

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 11d8da5cabf7c6c3263ba2cd9c00260395867048 ]

'pinctrl_unregister()' should not be called to undo
'devm_pinctrl_register_and_init()', it is already handled by the framework.

This simplifies the error handling paths of the probe function.
The 'imx_free_resources()' can be removed as well.

Fixes: a51c158bf0f7 ("pinctrl: imx: use radix trees for groups and functions")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/20200530204955.588962-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/freescale/pinctrl-imx.c | 19 ++-----------------
 1 file changed, 2 insertions(+), 17 deletions(-)

diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c
index 9f42036c5fbb..1f81569c7ae3 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx.c
@@ -774,16 +774,6 @@ static int imx_pinctrl_probe_dt(struct platform_device *pdev,
 	return 0;
 }
 
-/*
- * imx_free_resources() - free memory used by this driver
- * @info: info driver instance
- */
-static void imx_free_resources(struct imx_pinctrl *ipctl)
-{
-	if (ipctl->pctl)
-		pinctrl_unregister(ipctl->pctl);
-}
-
 int imx_pinctrl_probe(struct platform_device *pdev,
 		      const struct imx_pinctrl_soc_info *info)
 {
@@ -874,23 +864,18 @@ int imx_pinctrl_probe(struct platform_device *pdev,
 					     &ipctl->pctl);
 	if (ret) {
 		dev_err(&pdev->dev, "could not register IMX pinctrl driver\n");
-		goto free;
+		return ret;
 	}
 
 	ret = imx_pinctrl_probe_dt(pdev, ipctl);
 	if (ret) {
 		dev_err(&pdev->dev, "fail to probe dt properties\n");
-		goto free;
+		return ret;
 	}
 
 	dev_info(&pdev->dev, "initialized IMX pinctrl driver\n");
 
 	return pinctrl_enable(ipctl->pctl);
-
-free:
-	imx_free_resources(ipctl);
-
-	return ret;
 }
 
 static int __maybe_unused imx_pinctrl_suspend(struct device *dev)
-- 
2.25.1

[PATCH AUTOSEL 5.7 326/388] pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit ba403242615c2c99e27af7984b1650771a2cc2c9 ]

Use 'devm_of_iomap()' instead 'of_iomap()' to avoid a resource leak in
case of error.

Update the error handling code accordingly.

Fixes: 26d8cde5260b ("pinctrl: freescale: imx: add shared input select reg support")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200602200626.677981-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/freescale/pinctrl-imx.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c
index 1f81569c7ae3..cb7e0f08d2cf 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx.c
@@ -824,12 +824,13 @@ int imx_pinctrl_probe(struct platform_device *pdev,
 				return -EINVAL;
 			}
 
-			ipctl->input_sel_base = of_iomap(np, 0);
+			ipctl->input_sel_base = devm_of_iomap(&pdev->dev, np,
+							      0, NULL);
 			of_node_put(np);
-			if (!ipctl->input_sel_base) {
+			if (IS_ERR(ipctl->input_sel_base)) {
 				dev_err(&pdev->dev,
 					"iomuxc input select base address not found\n");
-				return -ENOMEM;
+				return PTR_ERR(ipctl->input_sel_base);
 			}
 		}
 	}
-- 
2.25.1