Linux-GPIO Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] pinctrl: aspeed: Describe the heartbeat function on ball Y23
@ 2020-07-01  3:07 Joel Stanley
  0 siblings, 0 replies; only message in thread
From: Joel Stanley @ 2020-07-01  3:07 UTC (permalink / raw)
  To: Linus Walleij; +Cc: Andrew Jeffery, linux-aspeed, linux-gpio, linux-kernel

From: Andrew Jeffery <andrew@aj.id.au>

The default pinmux configuration for Y23 is to route a heartbeat to
drive a LED. Previous revisions of the AST2600 datasheet did not include
a description of this function.

Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support")
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
index fa32c3e9c9d1..7efe6dbe4398 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
@@ -46,6 +46,7 @@
 #define SCU634		0x634 /* Disable GPIO Internal Pull-Down #5 */
 #define SCU638		0x638 /* Disable GPIO Internal Pull-Down #6 */
 #define SCU694		0x694 /* Multi-function Pin Control #25 */
+#define SCU69C		0x69C /* Multi-function Pin Control #27 */
 #define SCUC20		0xC20 /* PCIE configuration Setting Control */
 
 #define ASPEED_G6_NR_PINS 256
@@ -819,11 +820,13 @@ FUNC_DECL_2(PWM14, PWM14G0, PWM14G1);
 #define Y23 127
 SIG_EXPR_LIST_DECL_SEMG(Y23, PWM15, PWM15G1, PWM15, SIG_DESC_SET(SCU41C, 31));
 SIG_EXPR_LIST_DECL_SESG(Y23, THRUOUT3, THRU3, SIG_DESC_SET(SCU4BC, 31));
-PIN_DECL_2(Y23, GPIOP7, PWM15, THRUOUT3);
+SIG_EXPR_LIST_DECL_SESG(Y23, HEARTBEAT, HEARTBEAT, SIG_DESC_SET(SCU69C, 31));
+PIN_DECL_3(Y23, GPIOP7, PWM15, THRUOUT3, HEARTBEAT);
 GROUP_DECL(PWM15G1, Y23);
 FUNC_DECL_2(PWM15, PWM15G0, PWM15G1);
 
 FUNC_GROUP_DECL(THRU3, AB24, Y23);
+FUNC_GROUP_DECL(HEARTBEAT, Y23);
 
 #define AA25 128
 SSSF_PIN_DECL(AA25, GPIOQ0, TACH0, SIG_DESC_SET(SCU430, 0));
@@ -1920,6 +1923,7 @@ static const struct aspeed_pin_group aspeed_g6_groups[] = {
 	ASPEED_PINCTRL_GROUP(GPIU5),
 	ASPEED_PINCTRL_GROUP(GPIU6),
 	ASPEED_PINCTRL_GROUP(GPIU7),
+	ASPEED_PINCTRL_GROUP(HEARTBEAT),
 	ASPEED_PINCTRL_GROUP(HVI3C3),
 	ASPEED_PINCTRL_GROUP(HVI3C4),
 	ASPEED_PINCTRL_GROUP(I2C1),
@@ -2158,6 +2162,7 @@ static const struct aspeed_pin_function aspeed_g6_functions[] = {
 	ASPEED_PINCTRL_FUNC(GPIU5),
 	ASPEED_PINCTRL_FUNC(GPIU6),
 	ASPEED_PINCTRL_FUNC(GPIU7),
+	ASPEED_PINCTRL_FUNC(HEARTBEAT),
 	ASPEED_PINCTRL_FUNC(I2C1),
 	ASPEED_PINCTRL_FUNC(I2C10),
 	ASPEED_PINCTRL_FUNC(I2C11),
-- 
2.27.0


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-01  3:07 [PATCH] pinctrl: aspeed: Describe the heartbeat function on ball Y23 Joel Stanley

Linux-GPIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-gpio/0 linux-gpio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-gpio linux-gpio/ https://lore.kernel.org/linux-gpio \
		linux-gpio@vger.kernel.org
	public-inbox-index linux-gpio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-gpio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git