[PATCH] x86/platform/alix: Convert LED to GPIO machine descriptor

[PATCH] x86/platform/alix: Convert LED to GPIO machine descriptor

[Linus Walleij]

This makes the machine look up the LED from a GPIO machine
descriptor table. The Geode LEDs should be on the CS5535
companion chip.

Cc: linux-gpio@vger.kernel.org
Cc: linux-geode@lists.infradead.org
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Darren Hart <dvhart@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/x86/platform/geode/alix.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/arch/x86/platform/geode/alix.c b/arch/x86/platform/geode/alix.c
index c33f744b5388..4cc66c4fa20b 100644
--- a/arch/x86/platform/geode/alix.c
+++ b/arch/x86/platform/geode/alix.c
@@ -22,6 +22,7 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
+#include <linux/gpio/machine.h>
 #include <linux/dmi.h>
 
 #include <asm/geode.h>
@@ -69,21 +70,15 @@ static struct platform_device alix_buttons_dev = {
 static struct gpio_led alix_leds[] = {
 	{
 		.name = "alix:1",
-		.gpio = 6,
 		.default_trigger = "default-on",
-		.active_low = 1,
 	},
 	{
 		.name = "alix:2",
-		.gpio = 25,
 		.default_trigger = "default-off",
-		.active_low = 1,
 	},
 	{
 		.name = "alix:3",
-		.gpio = 27,
 		.default_trigger = "default-off",
-		.active_low = 1,
 	},
 };
 
@@ -92,6 +87,17 @@ static struct gpio_led_platform_data alix_leds_data = {
 	.leds = alix_leds,
 };
 
+static struct gpiod_lookup_table alix_leds_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		/* The Geode GPIOs should be on the CS5535 companion chip */
+		GPIO_LOOKUP_IDX("cs5535-gpio", 6, NULL, 0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("cs5535-gpio", 25, NULL, 1, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("cs5535-gpio", 27, NULL, 2, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct platform_device alix_leds_dev = {
 	.name = "leds-gpio",
 	.id = -1,
@@ -106,6 +112,7 @@ static struct platform_device *alix_devs[] __initdata = {
 static void __init register_alix(void)
 {
 	/* Setup LED control through leds-gpio driver */
+	gpiod_add_lookup_table(&alix_leds_gpio_table);
 	platform_add_devices(alix_devs, ARRAY_SIZE(alix_devs));
 }
 
-- 
2.26.2