Linux-GPIO Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v1 1/3] pinctrl: cherryview: Drop stale comment
@ 2020-07-27 16:12 Andy Shevchenko
  2020-07-27 16:12 ` [PATCH v1 2/3] pinctrl: cherryview: Move custom community members to separate data struct Andy Shevchenko
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: Andy Shevchenko @ 2020-07-27 16:12 UTC (permalink / raw)
  To: Mika Westerberg, linux-gpio, Linus Walleij; +Cc: Andy Shevchenko

There is no more .groups member in struct chv_pinctrl,
drop associated comment because it's not applicable anymore.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/intel/pinctrl-cherryview.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/pinctrl/intel/pinctrl-cherryview.c b/drivers/pinctrl/intel/pinctrl-cherryview.c
index 9ef246145bde..41708f7ea65c 100644
--- a/drivers/pinctrl/intel/pinctrl-cherryview.c
+++ b/drivers/pinctrl/intel/pinctrl-cherryview.c
@@ -86,9 +86,6 @@ struct intel_pad_context {
  * @irq: Our parent irq
  * @intr_lines: Mapping between 16 HW interrupt wires and GPIO offset (in GPIO number space)
  * @saved_intmask: Interrupt mask saved for system sleep
- *
- * The first group in @groups is expected to contain all pins that can be
- * used as GPIOs.
  */
 struct chv_pinctrl {
 	struct device *dev;
-- 
2.27.0


^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, back to index

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-27 16:12 [PATCH v1 1/3] pinctrl: cherryview: Drop stale comment Andy Shevchenko
2020-07-27 16:12 ` [PATCH v1 2/3] pinctrl: cherryview: Move custom community members to separate data struct Andy Shevchenko
2020-07-27 16:12 ` [PATCH v1 3/3] pinctrl: cherryview: Switch to use struct intel_pinctrl Andy Shevchenko
2020-08-03 10:02 ` [PATCH v1 1/3] pinctrl: cherryview: Drop stale comment Mika Westerberg
2020-08-18 12:07   ` Andy Shevchenko

Linux-GPIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-gpio/0 linux-gpio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-gpio linux-gpio/ https://lore.kernel.org/linux-gpio \
		linux-gpio@vger.kernel.org
	public-inbox-index linux-gpio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-gpio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git