From: Nikita Shubin <nikita.shubin@maquefel.me>
To: unlisted-recipients:; (no To-header on input)
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>,
Nikita Shubin <nikita.shubin@maquefel.me>,
Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Alexander Sverdlin <alexander.sverdlin@gmail.com>,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 9/9] gpio: ep93xx: replace bools with idx for IRQ ports
Date: Wed, 27 Jan 2021 13:46:17 +0300 [thread overview]
Message-ID: <20210127104617.1173-10-nikita.shubin@maquefel.me> (raw)
In-Reply-To: <20210127104617.1173-1-nikita.shubin@maquefel.me>
Replace boolean values used for determining if gpiochip is IRQ capable
or not with index.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
drivers/gpio/gpio-ep93xx.c | 47 ++++++++++++++++++++------------------
1 file changed, 25 insertions(+), 22 deletions(-)
diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c
index 2aee13b5067d..f75a33b79504 100644
--- a/drivers/gpio/gpio-ep93xx.c
+++ b/drivers/gpio/gpio-ep93xx.c
@@ -44,6 +44,8 @@ struct ep93xx_gpio {
struct irq_chip ic[EP93XX_GPIO_IRQ_CHIPS_NUM];
};
+#define EP93XX_GPIO_A_PORT_INDEX 0
+#define EP93XX_GPIO_B_PORT_INDEX 1
/*
* F Port index in GPIOCHIP'S array is 5
* but we use index 2 for stored values and offsets
@@ -291,38 +293,36 @@ static struct irq_chip ep93xx_gpio_irq_chip = {
* gpiolib interface for EP93xx on-chip GPIOs
*************************************************************************/
struct ep93xx_gpio_bank {
+ u8 idx;
const char *label;
int data;
int dir;
int base;
- bool has_irq;
- bool has_hierarchical_irq;
unsigned int irq_base;
};
-#define EP93XX_GPIO_BANK(_label, _data, _dir, _base, _has_irq, _has_hier, _irq_base) \
+#define EP93XX_GPIO_BANK(_index, _label, _data, _dir, _base, _irq_base) \
{ \
+ .idx = _index, \
.label = _label, \
.data = _data, \
.dir = _dir, \
.base = _base, \
- .has_irq = _has_irq, \
- .has_hierarchical_irq = _has_hier, \
.irq_base = _irq_base, \
}
static struct ep93xx_gpio_bank ep93xx_gpio_banks[] = {
/* Bank A has 8 IRQs */
- EP93XX_GPIO_BANK("A", 0x00, 0x10, 0, true, false, EP93XX_GPIO_A_IRQ_BASE),
+ EP93XX_GPIO_BANK(0, "A", 0x00, 0x10, 0, EP93XX_GPIO_A_IRQ_BASE),
/* Bank B has 8 IRQs */
- EP93XX_GPIO_BANK("B", 0x04, 0x14, 8, true, false, EP93XX_GPIO_B_IRQ_BASE),
- EP93XX_GPIO_BANK("C", 0x08, 0x18, 40, false, false, 0),
- EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24, false, false, 0),
- EP93XX_GPIO_BANK("E", 0x20, 0x24, 32, false, false, 0),
+ EP93XX_GPIO_BANK(1, "B", 0x04, 0x14, 8, EP93XX_GPIO_B_IRQ_BASE),
+ EP93XX_GPIO_BANK(2, "C", 0x08, 0x18, 40, 0),
+ EP93XX_GPIO_BANK(3, "D", 0x0c, 0x1c, 24, 0),
+ EP93XX_GPIO_BANK(4, "E", 0x20, 0x24, 32, 0),
/* Bank F has 8 IRQs */
- EP93XX_GPIO_BANK("F", 0x30, 0x34, 16, false, true, EP93XX_GPIO_F_IRQ_BASE),
- EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48, false, false, 0),
- EP93XX_GPIO_BANK("H", 0x40, 0x44, 56, false, false, 0),
+ EP93XX_GPIO_BANK(5, "F", 0x30, 0x34, 16, EP93XX_GPIO_F_IRQ_BASE),
+ EP93XX_GPIO_BANK(6, "G", 0x38, 0x3c, 48, 0),
+ EP93XX_GPIO_BANK(7, "H", 0x40, 0x44, 56, 0),
};
static int ep93xx_gpio_set_config(struct gpio_chip *gc, unsigned offset,
@@ -356,10 +356,11 @@ static void ep93xx_init_irq_chips(struct ep93xx_gpio *epg)
}
static int ep93xx_gpio_add_ab_irq_chip(struct platform_device *pdev,
- struct gpio_irq_chip *girq,
+ struct gpio_chip *gc,
unsigned int irq_base)
{
struct device *dev = &pdev->dev;
+ struct gpio_irq_chip *girq = &gc->irq;
int ab_parent_irq = platform_get_irq(pdev, 0);
girq->parent_handler = ep93xx_gpio_ab_irq_handler;
@@ -378,12 +379,13 @@ static int ep93xx_gpio_add_ab_irq_chip(struct platform_device *pdev,
}
static int ep93xx_gpio_add_f_irq_chip(struct platform_device *pdev,
- struct gpio_irq_chip *girq,
+ struct gpio_chip *gc,
unsigned int irq_base)
{
int gpio_irq;
int i;
struct device *dev = &pdev->dev;
+ struct gpio_irq_chip *girq = &gc->irq;
/*
* FIXME: convert this to use hierarchical IRQ support!
@@ -397,10 +399,10 @@ static int ep93xx_gpio_add_f_irq_chip(struct platform_device *pdev,
if (!girq->parents)
return -ENOMEM;
/* Pick resources 1..8 for these IRQs */
- for (i = 0; i < ARRAY_SIZE(girq->parents); i++) {
+ for (i = 0; i < girq->num_parents; i++) {
girq->parents[i] = platform_get_irq(pdev, i + 1);
gpio_irq = irq_base + i;
- irq_set_chip_data(gpio_irq, &epg->gc[5]);
+ irq_set_chip_data(gpio_irq, gc);
irq_set_chip_and_handler(gpio_irq,
&ep93xx_gpio_irq_chip,
handle_level_irq);
@@ -433,21 +435,22 @@ static int ep93xx_gpio_add_bank(struct gpio_chip *gc,
gc->base = bank->base;
girq = &gc->irq;
- if (bank->has_irq || bank->has_hierarchical_irq) {
+ if (bank->irq_base != 0) {
gc->set_config = ep93xx_gpio_set_config;
port = ep93xx_gpio_port(epg, gc);
girq->chip = &epg->ic[port];
}
- if (bank->has_irq) {
- err = ep93xx_gpio_add_ab_irq_chip(pdev, girq, bank->irq_base);
+ if (bank->idx == EP93XX_GPIO_A_PORT_INDEX ||
+ bank->idx == EP93XX_GPIO_B_PORT_INDEX) {
+ err = ep93xx_gpio_add_ab_irq_chip(pdev, gc, bank->irq_base);
if (err)
return err;
}
/* Only bank F has especially funky IRQ handling */
- if (bank->has_hierarchical_irq) {
- err = ep93xx_gpio_add_f_irq_chip(pdev, girq, bank->irq_base);
+ if (bank->idx == EP93XX_GPIO_F_PORT_INDEX) {
+ err = ep93xx_gpio_add_f_irq_chip(pdev, gc, bank->irq_base);
if (err)
return err;
}
--
2.29.2
next prev parent reply other threads:[~2021-01-27 10:50 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-28 15:00 [PATCH] gpiolib: warning on gpiochip->to_irq defined Nikita Shubin
2021-01-04 14:15 ` Bartosz Golaszewski
2021-01-18 9:05 ` [PATCH v2] " Nikita Shubin
2021-01-19 10:51 ` Bartosz Golaszewski
2021-01-27 10:46 ` [PATCH v2 0/9] gpio: ep93xx: fixes series patch Nikita Shubin
2021-01-27 10:46 ` [PATCH v2 1/9] gpio: ep93xx: fix BUG_ON port F usage Nikita Shubin
2021-01-27 10:46 ` [PATCH v2 2/9] gpio: ep93xx: Fix single irqchip with multi gpiochips Nikita Shubin
2021-01-27 21:39 ` Alexander Sverdlin
2021-01-28 10:17 ` Alexander Sverdlin
2021-01-27 10:46 ` [PATCH v2 3/9] gpio: ep93xx: Fix wrong irq numbers in port F Nikita Shubin
2021-01-27 21:50 ` Linus Walleij
2021-01-28 10:15 ` Alexander Sverdlin
2021-01-27 10:46 ` [PATCH v2 4/9] gpio: ep93xx: drop to_irq binding Nikita Shubin
2021-01-27 12:21 ` Alexander Sverdlin
2021-01-27 10:46 ` [PATCH v2 5/9] gpio: ep93xx: Fix typo s/hierarchial/hierarchical Nikita Shubin
2021-01-27 13:20 ` Alexander Sverdlin
2021-01-27 10:46 ` [PATCH v2 6/9] gpio: ep93xx: refactor ep93xx_gpio_add_bank Nikita Shubin
2021-01-27 13:24 ` Alexander Sverdlin
2021-01-27 10:46 ` [PATCH v2 7/9] gpio: ep93xx: separate IRQ's setup Nikita Shubin
2021-01-27 20:48 ` Alexander Sverdlin
2021-01-27 10:46 ` [PATCH v2 8/9] gpio: ep93xx: refactor base IRQ number Nikita Shubin
2021-01-27 11:36 ` Alexander Sverdlin
2021-01-27 10:46 ` Nikita Shubin [this message]
2021-01-27 11:34 ` [PATCH v2 9/9] gpio: ep93xx: replace bools with idx for IRQ ports Alexander Sverdlin
2021-01-27 21:54 ` [PATCH v2 0/9] gpio: ep93xx: fixes series patch Linus Walleij
2021-01-28 10:19 ` Alexander Sverdlin
2021-01-28 11:57 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210127104617.1173-10-nikita.shubin@maquefel.me \
--to=nikita.shubin@maquefel.me \
--cc=alexander.sverdlin@gmail.com \
--cc=andy.shevchenko@gmail.com \
--cc=bgolaszewski@baylibre.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).