linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexander Sverdlin <alexander.sverdlin@gmail.com>
To: Nikita Shubin <nikita.shubin@maquefel.me>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 9/9] gpio: ep93xx: replace bools with idx for IRQ ports
Date: Wed, 27 Jan 2021 12:34:23 +0100	[thread overview]
Message-ID: <409a17a00b4797b56ce6d47441c6477d34734309.camel@gmail.com> (raw)
In-Reply-To: <20210127104617.1173-10-nikita.shubin@maquefel.me>

Hello Nikita!

On Wed, 2021-01-27 at 13:46 +0300, Nikita Shubin wrote:
> Replace boolean values used for determining if gpiochip is IRQ
> capable
> or not with index.

What's the purpose of this patch?
It neither makes the code more effective nor does it make
the code more readable IMO. There are also some changes in the
code which were not mentioned in the commit message.

> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
> ---
>  drivers/gpio/gpio-ep93xx.c | 47 ++++++++++++++++++++----------------
> --
>  1 file changed, 25 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c
> index 2aee13b5067d..f75a33b79504 100644
> --- a/drivers/gpio/gpio-ep93xx.c
> +++ b/drivers/gpio/gpio-ep93xx.c
> @@ -44,6 +44,8 @@ struct ep93xx_gpio {
>         struct irq_chip         ic[EP93XX_GPIO_IRQ_CHIPS_NUM];
>  };
>  
> +#define EP93XX_GPIO_A_PORT_INDEX 0
> +#define EP93XX_GPIO_B_PORT_INDEX 1
>  /*
>   * F Port index in GPIOCHIP'S array is 5
>   * but we use index 2 for stored values and offsets
> @@ -291,38 +293,36 @@ static struct irq_chip ep93xx_gpio_irq_chip = {
>   * gpiolib interface for EP93xx on-chip GPIOs
>  
> *********************************************************************
> ****/
>  struct ep93xx_gpio_bank {
> +       u8              idx;
>         const char      *label;
>         int             data;
>         int             dir;
>         int             base;
> -       bool            has_irq;
> -       bool            has_hierarchical_irq;
>         unsigned int    irq_base;
>  };
>  
> -#define EP93XX_GPIO_BANK(_label, _data, _dir, _base, _has_irq,
> _has_hier, _irq_base) \
> +#define EP93XX_GPIO_BANK(_index, _label, _data, _dir, _base,
> _irq_base) \
>         {                                                       \
> +               .idx            = _index,                       \
>                 .label          = _label,                       \
>                 .data           = _data,                        \
>                 .dir            = _dir,                         \
>                 .base           = _base,                        \
> -               .has_irq        = _has_irq,                     \
> -               .has_hierarchical_irq = _has_hier,              \
>                 .irq_base       = _irq_base,                    \
>         }
>  
>  static struct ep93xx_gpio_bank ep93xx_gpio_banks[] = {
>         /* Bank A has 8 IRQs */
> -       EP93XX_GPIO_BANK("A", 0x00, 0x10, 0, true, false,
> EP93XX_GPIO_A_IRQ_BASE),
> +       EP93XX_GPIO_BANK(0, "A", 0x00, 0x10, 0,
> EP93XX_GPIO_A_IRQ_BASE),
>         /* Bank B has 8 IRQs */
> -       EP93XX_GPIO_BANK("B", 0x04, 0x14, 8, true, false,
> EP93XX_GPIO_B_IRQ_BASE),
> -       EP93XX_GPIO_BANK("C", 0x08, 0x18, 40, false, false, 0),
> -       EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24, false, false, 0),
> -       EP93XX_GPIO_BANK("E", 0x20, 0x24, 32, false, false, 0),
> +       EP93XX_GPIO_BANK(1, "B", 0x04, 0x14, 8,
> EP93XX_GPIO_B_IRQ_BASE),
> +       EP93XX_GPIO_BANK(2, "C", 0x08, 0x18, 40, 0),
> +       EP93XX_GPIO_BANK(3, "D", 0x0c, 0x1c, 24, 0),
> +       EP93XX_GPIO_BANK(4, "E", 0x20, 0x24, 32, 0),
>         /* Bank F has 8 IRQs */
> -       EP93XX_GPIO_BANK("F", 0x30, 0x34, 16, false, true,
> EP93XX_GPIO_F_IRQ_BASE),
> -       EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48, false, false, 0),
> -       EP93XX_GPIO_BANK("H", 0x40, 0x44, 56, false, false, 0),
> +       EP93XX_GPIO_BANK(5, "F", 0x30, 0x34, 16,
> EP93XX_GPIO_F_IRQ_BASE),
> +       EP93XX_GPIO_BANK(6, "G", 0x38, 0x3c, 48, 0),
> +       EP93XX_GPIO_BANK(7, "H", 0x40, 0x44, 56, 0),
>  };
>  
>  static int ep93xx_gpio_set_config(struct gpio_chip *gc, unsigned
> offset,
> @@ -356,10 +356,11 @@ static void ep93xx_init_irq_chips(struct
> ep93xx_gpio *epg)
>  }
>  
>  static int ep93xx_gpio_add_ab_irq_chip(struct platform_device *pdev,
> -                                       struct gpio_irq_chip *girq,
> +                                       struct gpio_chip *gc,
>                                         unsigned int irq_base)
>  {
>         struct device *dev = &pdev->dev;
> +       struct gpio_irq_chip *girq = &gc->irq;
>         int ab_parent_irq = platform_get_irq(pdev, 0);
>  
>         girq->parent_handler = ep93xx_gpio_ab_irq_handler;
> @@ -378,12 +379,13 @@ static int ep93xx_gpio_add_ab_irq_chip(struct
> platform_device *pdev,
>  }
>  
>  static int ep93xx_gpio_add_f_irq_chip(struct platform_device *pdev,
> -                                       struct gpio_irq_chip *girq,
> +                                       struct gpio_chip *gc,
>                                         unsigned int irq_base)
>  {
>         int gpio_irq;
>         int i;
>         struct device *dev = &pdev->dev;
> +       struct gpio_irq_chip *girq = &gc->irq;
>  
>         /*
>          * FIXME: convert this to use hierarchical IRQ support!
> @@ -397,10 +399,10 @@ static int ep93xx_gpio_add_f_irq_chip(struct
> platform_device *pdev,
>         if (!girq->parents)
>                 return -ENOMEM;
>         /* Pick resources 1..8 for these IRQs */
> -       for (i = 0; i < ARRAY_SIZE(girq->parents); i++) {
> +       for (i = 0; i < girq->num_parents; i++) {
>                 girq->parents[i] = platform_get_irq(pdev, i + 1);
>                 gpio_irq = irq_base + i;
> -               irq_set_chip_data(gpio_irq, &epg->gc[5]);
> +               irq_set_chip_data(gpio_irq, gc);
>                 irq_set_chip_and_handler(gpio_irq,
>                                          &ep93xx_gpio_irq_chip,
>                                          handle_level_irq);
> @@ -433,21 +435,22 @@ static int ep93xx_gpio_add_bank(struct
> gpio_chip *gc,
>         gc->base = bank->base;
>  
>         girq = &gc->irq;
> -       if (bank->has_irq || bank->has_hierarchical_irq) {
> +       if (bank->irq_base != 0) {
>                 gc->set_config = ep93xx_gpio_set_config;
>                 port = ep93xx_gpio_port(epg, gc);
>                 girq->chip = &epg->ic[port];
>         }
>  
> -       if (bank->has_irq) {
> -               err = ep93xx_gpio_add_ab_irq_chip(pdev, girq, bank-
> >irq_base);
> +       if (bank->idx == EP93XX_GPIO_A_PORT_INDEX ||
> +               bank->idx == EP93XX_GPIO_B_PORT_INDEX) {
> +               err = ep93xx_gpio_add_ab_irq_chip(pdev, gc, bank-
> >irq_base);
>                 if (err)
>                         return err;
>         }
>  
>         /* Only bank F has especially funky IRQ handling */
> -       if (bank->has_hierarchical_irq) {
> -               err = ep93xx_gpio_add_f_irq_chip(pdev, girq, bank-
> >irq_base);
> +       if (bank->idx == EP93XX_GPIO_F_PORT_INDEX) {
> +               err = ep93xx_gpio_add_f_irq_chip(pdev, gc, bank-
> >irq_base);
>                 if (err)
>                         return err;
>         }

-- 
Alexander Sverdlin.



  reply	other threads:[~2021-01-27 11:37 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-28 15:00 [PATCH] gpiolib: warning on gpiochip->to_irq defined Nikita Shubin
2021-01-04 14:15 ` Bartosz Golaszewski
2021-01-18  9:05 ` [PATCH v2] " Nikita Shubin
2021-01-19 10:51   ` Bartosz Golaszewski
2021-01-27 10:46 ` [PATCH v2 0/9] gpio: ep93xx: fixes series patch Nikita Shubin
2021-01-27 10:46   ` [PATCH v2 1/9] gpio: ep93xx: fix BUG_ON port F usage Nikita Shubin
2021-01-27 10:46   ` [PATCH v2 2/9] gpio: ep93xx: Fix single irqchip with multi gpiochips Nikita Shubin
2021-01-27 21:39     ` Alexander Sverdlin
2021-01-28 10:17     ` Alexander Sverdlin
2021-01-27 10:46   ` [PATCH v2 3/9] gpio: ep93xx: Fix wrong irq numbers in port F Nikita Shubin
2021-01-27 21:50     ` Linus Walleij
2021-01-28 10:15     ` Alexander Sverdlin
2021-01-27 10:46   ` [PATCH v2 4/9] gpio: ep93xx: drop to_irq binding Nikita Shubin
2021-01-27 12:21     ` Alexander Sverdlin
2021-01-27 10:46   ` [PATCH v2 5/9] gpio: ep93xx: Fix typo s/hierarchial/hierarchical Nikita Shubin
2021-01-27 13:20     ` Alexander Sverdlin
2021-01-27 10:46   ` [PATCH v2 6/9] gpio: ep93xx: refactor ep93xx_gpio_add_bank Nikita Shubin
2021-01-27 13:24     ` Alexander Sverdlin
2021-01-27 10:46   ` [PATCH v2 7/9] gpio: ep93xx: separate IRQ's setup Nikita Shubin
2021-01-27 20:48     ` Alexander Sverdlin
2021-01-27 10:46   ` [PATCH v2 8/9] gpio: ep93xx: refactor base IRQ number Nikita Shubin
2021-01-27 11:36     ` Alexander Sverdlin
2021-01-27 10:46   ` [PATCH v2 9/9] gpio: ep93xx: replace bools with idx for IRQ ports Nikita Shubin
2021-01-27 11:34     ` Alexander Sverdlin [this message]
2021-01-27 21:54   ` [PATCH v2 0/9] gpio: ep93xx: fixes series patch Linus Walleij
2021-01-28 10:19     ` Alexander Sverdlin
2021-01-28 11:57       ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=409a17a00b4797b56ce6d47441c6477d34734309.camel@gmail.com \
    --to=alexander.sverdlin@gmail.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nikita.shubin@maquefel.me \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).