From: Piyush Mehta <piyush.mehta@xilinx.com>
To: <arnd@arndb.de>, <zou_wei@huawei.com>,
<gregkh@linuxfoundation.org>, <linus.walleij@linaro.org>,
<michal.simek@xilinx.com>, <wendy.liang@xilinx.com>,
<iwamatsu@nigauri.org>, <bgolaszewski@baylibre.com>,
<robh+dt@kernel.org>, <rajan.vaja@xilinx.com>
Cc: <linux-gpio@vger.kernel.org>, <devicetree@vger.kernel.org>,
<git@xilinx.com>, <sgoud@xilinx.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
Piyush Mehta <piyush.mehta@xilinx.com>
Subject: [PATCH V3 2/3] dt-bindings: gpio: zynqmp: Add binding documentation for modepin
Date: Wed, 18 Aug 2021 13:40:17 +0530 [thread overview]
Message-ID: <20210818081018.2620544-3-piyush.mehta@xilinx.com> (raw)
In-Reply-To: <20210818081018.2620544-1-piyush.mehta@xilinx.com>
This patch adds DT binding document for zynqmp modepin GPIO controller.
Modepin GPIO controller has four GPIO pins which can be configurable
as input or output.
Modepin driver is a bridge between the peripheral driver and GPIO pins.
It has set and get APIs for accessing GPIO pins, based on the device-tree
entry of reset-gpio property in the peripheral driver, every pin can be
configured as input/output and trigger GPIO pin.
For more information please refer zynqMp TRM link:
Link: https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf
Chapter 2: Signals, Interfaces, and Pins
Table 2-2: Clock, Reset, and Configuration Pins - PS_MODE
Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
---
Changes in v2:
- Addressed review comments: Update commit message
Review Comments:
https://lore.kernel.org/linux-arm-kernel/20210615080553.2021061-2-piyush.mehta@xilinx.com/T/#mbd1fbda813e33b19397b350bde75747c92a0d7e1
https://lore.kernel.org/linux-arm-kernel/20210615080553.2021061-2-piyush.mehta@xilinx.com/T/#me82b1444ab3776162cdb0077dfc9256365c7e736
Changes in v3:
- Addressed Rob and Michal review comments:
- Update DT example.
Review Comments:
https://lore.kernel.org/linux-arm-kernel/YRbBnRS0VosXcZWz@robh.at.kernel.org/
https://lore.kernel.org/linux-arm-kernel/d71ad7f9-6972-8cc0-6dfb-b5306c9900d0@xilinx.com/
---
.../bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml | 41 ++++++++++++++++++++++
.../bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml | 43 ++++++++++++++++++++++
1 file changed, 43 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
diff --git a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
new file mode 100644
index 0000000..1442815
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ZynqMP Mode Pin GPIO controller
+
+description:
+ PS_MODE is 4-bits boot mode pins sampled on POR deassertion. Mode Pin
+ GPIO controller with configurable from numbers of pins (from 0 to 3 per
+ PS_MODE). Every pin can be configured as input/output.
+
+maintainers:
+ - Piyush Mehta <piyush.mehta@xilinx.com>
+
+properties:
+ compatible:
+ const: xlnx,zynqmp-gpio-modepin
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+required:
+ - compatible
+ - gpio-controller
+ - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ zynqmp-firmware {
+ gpio {
+ compatible = "xlnx,zynqmp-gpio-modepin";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+...
--
2.7.4
next prev parent reply other threads:[~2021-08-18 8:11 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-18 8:10 [PATCH V3 0/3] gpio: modepin: Add driver support for modepin GPIO controller Piyush Mehta
2021-08-18 8:10 ` [PATCH V3 1/3] firmware: zynqmp: Add MMIO read and write support for PS_MODE pin Piyush Mehta
2021-08-18 8:10 ` Piyush Mehta [this message]
2021-08-18 9:00 ` [PATCH V3 2/3] dt-bindings: gpio: zynqmp: Add binding documentation for modepin Ahmad Fatoum
2021-08-18 9:38 ` Michal Simek
2021-08-18 9:55 ` Ahmad Fatoum
2021-08-18 10:01 ` Michal Simek
2021-08-23 18:09 ` Rob Herring
2021-08-18 8:10 ` [PATCH V3 3/3] gpio: modepin: Add driver support for modepin GPIO controller Piyush Mehta
2021-08-18 8:52 ` Ahmad Fatoum
2021-08-18 10:09 ` Piyush Mehta
2021-08-18 13:05 ` Ahmad Fatoum
2021-08-23 8:02 ` Bartosz Golaszewski
2021-08-23 8:14 ` Michal Simek
2021-09-22 10:18 ` Bartosz Golaszewski
2021-09-22 10:21 ` Bartosz Golaszewski
2021-09-22 10:23 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210818081018.2620544-3-piyush.mehta@xilinx.com \
--to=piyush.mehta@xilinx.com \
--cc=arnd@arndb.de \
--cc=bgolaszewski@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=git@xilinx.com \
--cc=gregkh@linuxfoundation.org \
--cc=iwamatsu@nigauri.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=rajan.vaja@xilinx.com \
--cc=robh+dt@kernel.org \
--cc=sgoud@xilinx.com \
--cc=wendy.liang@xilinx.com \
--cc=zou_wei@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).