* [PATCH v3 1/3] arm64: dts: qcom: msm8994: Correct SPI10 CS pin
@ 2022-10-18 15:54 Krzysztof Kozlowski
2022-10-18 15:54 ` [PATCH v3 2/3] arm64: dts: qcom: msm8994: Align TLMM pin configuration with DT schema Krzysztof Kozlowski
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-18 15:54 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The GPIO55 is part of SPI10 pins, not its chip-select. Probably the
intention was to use one of dedicated chip-select GPIOs: 47 or 67.
GPIO47 is used for UART2, so choose GPIO67.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes since v2:
1. None
Changes since v1:
1. None
Not tested on hardware.
---
arch/arm64/boot/dts/qcom/msm8994.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index ded5b7ceeaf9..7a582a5fe3a8 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -897,7 +897,7 @@ default {
};
cs {
function = "gpio";
- pins = "gpio55";
+ pins = "gpio67";
drive-strength = <2>;
bias-disable;
};
--
2.34.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v3 2/3] arm64: dts: qcom: msm8994: Align TLMM pin configuration with DT schema
2022-10-18 15:54 [PATCH v3 1/3] arm64: dts: qcom: msm8994: Correct SPI10 CS pin Krzysztof Kozlowski
@ 2022-10-18 15:54 ` Krzysztof Kozlowski
2022-10-18 15:54 ` [PATCH v3 3/3] dt-bindings: pinctrl: qcom,msm8994: convert to dtschema Krzysztof Kozlowski
2022-11-08 1:27 ` (subset) [PATCH v3 1/3] arm64: dts: qcom: msm8994: Correct SPI10 CS pin Bjorn Andersson
2 siblings, 0 replies; 5+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-18 15:54 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
Order the "function" and "pins" property to match other DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
Changes since v2:
1. None
Changes since v1:
1. Add Rb tag.
---
.../dts/qcom/msm8994-msft-lumia-octagon.dtsi | 8 +-
.../qcom/msm8994-sony-xperia-kitakami.dtsi | 6 +-
arch/arm64/boot/dts/qcom/msm8994.dtsi | 130 +++++++++---------
3 files changed, 74 insertions(+), 70 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
index f9d8bd09e074..63568f73e9d3 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
@@ -881,28 +881,28 @@ &sdhc2 {
};
&tlmm {
- grip_default: grip-default {
+ grip_default: grip-default-state {
pins = "gpio39";
function = "gpio";
drive-strength = <6>;
bias-pull-down;
};
- grip_sleep: grip-sleep {
+ grip_sleep: grip-sleep-state {
pins = "gpio39";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
- hall_front_default: hall-front-default {
+ hall_front_default: hall-front-default-state {
pins = "gpio42";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
- hall_back_default: hall-back-default {
+ hall_back_default: hall-back-default-state {
pins = "gpio75";
function = "gpio";
drive-strength = <2>;
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
index ff60b7004d26..a390af54c715 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -477,15 +477,17 @@ &sdhc2 {
};
&tlmm {
- ts_int_active: ts-int-active {
+ ts_int_active: ts-int-active-state {
pins = "gpio42";
+ function = "gpio";
drive-strength = <2>;
bias-disable;
input-enable;
};
- ts_reset_active: ts-reset-active {
+ ts_reset_active: ts-reset-active-state {
pins = "gpio109";
+ function = "gpio";
drive-strength = <2>;
bias-disable;
output-low;
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index 7a582a5fe3a8..ba687e64ba3c 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -773,254 +773,256 @@ tlmm: pinctrl@fd510000 {
interrupt-controller;
#interrupt-cells = <2>;
- blsp1_uart2_default: blsp1-uart2-default {
- function = "blsp_uart2";
+ blsp1_uart2_default: blsp1-uart2-default-state {
pins = "gpio4", "gpio5";
+ function = "blsp_uart2";
drive-strength = <16>;
bias-disable;
};
- blsp1_uart2_sleep: blsp1-uart2-sleep {
- function = "gpio";
+ blsp1_uart2_sleep: blsp1-uart2-sleep-state {
pins = "gpio4", "gpio5";
+ function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
- blsp2_uart2_default: blsp2-uart2-default {
+ blsp2_uart2_default: blsp2-uart2-default-state {
+ pins = "gpio45", "gpio46", "gpio47", "gpio48";
function = "blsp_uart8";
- pins = "gpio45", "gpio46",
- "gpio47", "gpio48";
drive-strength = <16>;
bias-disable;
};
- blsp2_uart2_sleep: blsp2-uart2-sleep {
+ blsp2_uart2_sleep: blsp2-uart2-sleep-state {
+ pins = "gpio45", "gpio46", "gpio47", "gpio48";
function = "gpio";
- pins = "gpio45", "gpio46",
- "gpio47", "gpio48";
drive-strength = <2>;
bias-disable;
};
- i2c1_default: i2c1-default {
- function = "blsp_i2c1";
+ i2c1_default: i2c1-default-state {
pins = "gpio2", "gpio3";
+ function = "blsp_i2c1";
drive-strength = <2>;
bias-disable;
};
- i2c1_sleep: i2c1-sleep {
- function = "gpio";
+ i2c1_sleep: i2c1-sleep-state {
pins = "gpio2", "gpio3";
+ function = "gpio";
drive-strength = <2>;
bias-disable;
};
- i2c2_default: i2c2-default {
- function = "blsp_i2c2";
+ i2c2_default: i2c2-default-state {
pins = "gpio6", "gpio7";
+ function = "blsp_i2c2";
drive-strength = <2>;
bias-disable;
};
- i2c2_sleep: i2c2-sleep {
- function = "gpio";
+ i2c2_sleep: i2c2-sleep-state {
pins = "gpio6", "gpio7";
+ function = "gpio";
drive-strength = <2>;
bias-disable;
};
- i2c4_default: i2c4-default {
- function = "blsp_i2c4";
+ i2c4_default: i2c4-default-state {
pins = "gpio19", "gpio20";
+ function = "blsp_i2c4";
drive-strength = <2>;
bias-disable;
};
- i2c4_sleep: i2c4-sleep {
- function = "gpio";
+ i2c4_sleep: i2c4-sleep-state {
pins = "gpio19", "gpio20";
+ function = "gpio";
drive-strength = <2>;
bias-pull-down;
input-enable;
};
- i2c5_default: i2c5-default {
- function = "blsp_i2c5";
+ i2c5_default: i2c5-default-state {
pins = "gpio23", "gpio24";
+ function = "blsp_i2c5";
drive-strength = <2>;
bias-disable;
};
- i2c5_sleep: i2c5-sleep {
- function = "gpio";
+ i2c5_sleep: i2c5-sleep-state {
pins = "gpio23", "gpio24";
+ function = "gpio";
drive-strength = <2>;
bias-disable;
};
- i2c6_default: i2c6-default {
- function = "blsp_i2c6";
+ i2c6_default: i2c6-default-state {
pins = "gpio28", "gpio27";
+ function = "blsp_i2c6";
drive-strength = <2>;
bias-disable;
};
- i2c6_sleep: i2c6-sleep {
- function = "gpio";
+ i2c6_sleep: i2c6-sleep-state {
pins = "gpio28", "gpio27";
+ function = "gpio";
drive-strength = <2>;
bias-disable;
};
- i2c7_default: i2c7-default {
- function = "blsp_i2c7";
+ i2c7_default: i2c7-default-state {
pins = "gpio44", "gpio43";
+ function = "blsp_i2c7";
drive-strength = <2>;
bias-disable;
};
- i2c7_sleep: i2c7-sleep {
- function = "gpio";
+ i2c7_sleep: i2c7-sleep-state {
pins = "gpio44", "gpio43";
+ function = "gpio";
drive-strength = <2>;
bias-disable;
};
- blsp2_spi10_default: blsp2-spi10-default {
- default {
- function = "blsp_spi10";
+ blsp2_spi10_default: blsp2-spi10-default-state {
+ default-pins {
pins = "gpio53", "gpio54", "gpio55";
+ function = "blsp_spi10";
drive-strength = <10>;
bias-pull-down;
};
- cs {
- function = "gpio";
+
+ cs-pins {
pins = "gpio67";
+ function = "gpio";
drive-strength = <2>;
bias-disable;
};
};
- blsp2_spi10_sleep: blsp2-spi10-sleep {
+ blsp2_spi10_sleep: blsp2-spi10-sleep-state {
pins = "gpio53", "gpio54", "gpio55";
+ function = "gpio";
drive-strength = <2>;
bias-disable;
};
- i2c11_default: i2c11-default {
- function = "blsp_i2c11";
+ i2c11_default: i2c11-default-state {
pins = "gpio83", "gpio84";
+ function = "blsp_i2c11";
drive-strength = <2>;
bias-disable;
};
- i2c11_sleep: i2c11-sleep {
- function = "gpio";
+ i2c11_sleep: i2c11-sleep-state {
pins = "gpio83", "gpio84";
+ function = "gpio";
drive-strength = <2>;
bias-disable;
};
- blsp1_spi1_default: blsp1-spi1-default {
- default {
- function = "blsp_spi1";
+ blsp1_spi1_default: blsp1-spi1-default-state {
+ default-pins {
pins = "gpio0", "gpio1", "gpio3";
+ function = "blsp_spi1";
drive-strength = <10>;
bias-pull-down;
};
- cs {
- function = "gpio";
+
+ cs-pins {
pins = "gpio8";
+ function = "gpio";
drive-strength = <2>;
bias-disable;
};
};
- blsp1_spi1_sleep: blsp1-spi1-sleep {
+ blsp1_spi1_sleep: blsp1-spi1-sleep-state {
pins = "gpio0", "gpio1", "gpio3";
+ function = "gpio";
drive-strength = <2>;
bias-disable;
};
- sdc1_clk_on: clk-on {
+ sdc1_clk_on: clk-on-state {
pins = "sdc1_clk";
bias-disable;
drive-strength = <16>;
};
- sdc1_clk_off: clk-off {
+ sdc1_clk_off: clk-off-state {
pins = "sdc1_clk";
bias-disable;
drive-strength = <2>;
};
- sdc1_cmd_on: cmd-on {
+ sdc1_cmd_on: cmd-on-state {
pins = "sdc1_cmd";
bias-pull-up;
drive-strength = <8>;
};
- sdc1_cmd_off: cmd-off {
+ sdc1_cmd_off: cmd-off-state {
pins = "sdc1_cmd";
bias-pull-up;
drive-strength = <2>;
};
- sdc1_data_on: data-on {
+ sdc1_data_on: data-on-state {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <8>;
};
- sdc1_data_off: data-off {
+ sdc1_data_off: data-off-state {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <2>;
};
- sdc1_rclk_on: rclk-on {
+ sdc1_rclk_on: rclk-on-state {
pins = "sdc1_rclk";
bias-pull-down;
};
- sdc1_rclk_off: rclk-off {
+ sdc1_rclk_off: rclk-off-state {
pins = "sdc1_rclk";
bias-pull-down;
};
- sdc2_clk_on: sdc2-clk-on {
+ sdc2_clk_on: sdc2-clk-on-state {
pins = "sdc2_clk";
bias-disable;
drive-strength = <10>;
};
- sdc2_clk_off: sdc2-clk-off {
+ sdc2_clk_off: sdc2-clk-off-state {
pins = "sdc2_clk";
bias-disable;
drive-strength = <2>;
};
- sdc2_cmd_on: sdc2-cmd-on {
+ sdc2_cmd_on: sdc2-cmd-on-state {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <10>;
};
- sdc2_cmd_off: sdc2-cmd-off {
+ sdc2_cmd_off: sdc2-cmd-off-state {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <2>;
};
- sdc2_data_on: sdc2-data-on {
+ sdc2_data_on: sdc2-data-on-state {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <10>;
};
- sdc2_data_off: sdc2-data-off {
+ sdc2_data_off: sdc2-data-off-state {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <2>;
--
2.34.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v3 3/3] dt-bindings: pinctrl: qcom,msm8994: convert to dtschema
2022-10-18 15:54 [PATCH v3 1/3] arm64: dts: qcom: msm8994: Correct SPI10 CS pin Krzysztof Kozlowski
2022-10-18 15:54 ` [PATCH v3 2/3] arm64: dts: qcom: msm8994: Align TLMM pin configuration with DT schema Krzysztof Kozlowski
@ 2022-10-18 15:54 ` Krzysztof Kozlowski
2022-10-19 14:44 ` (subset) " Krzysztof Kozlowski
2022-11-08 1:27 ` (subset) [PATCH v3 1/3] arm64: dts: qcom: msm8994: Correct SPI10 CS pin Bjorn Andersson
2 siblings, 1 reply; 5+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-18 15:54 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-gpio,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski, Rob Herring
Convert Qualcomm MSM8994 pin controller bindings to DT schema. Keep the
parsing of pin configuration subnodes consistent with other Qualcomm
schemas (children named with '-state' suffix, their children with
'-pins').
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes since v2:
1. Add Rb tag.
2. Drop entire drive-strength (not needed, brought by common TLMM
schema).
Changes since v1:
1. Drop default:2 for drive strength
---
.../bindings/pinctrl/qcom,msm8994-pinctrl.txt | 186 ------------------
.../pinctrl/qcom,msm8994-pinctrl.yaml | 162 +++++++++++++++
2 files changed, 162 insertions(+), 186 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt
deleted file mode 100644
index da52df6273bc..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt
+++ /dev/null
@@ -1,186 +0,0 @@
-Qualcomm MSM8994 TLMM block
-
-This binding describes the Top Level Mode Multiplexer block found in the
-MSM8994 platform.
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: Should contain one of:
- "qcom,msm8992-pinctrl",
- "qcom,msm8994-pinctrl".
-
-- reg:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: the base address and size of the TLMM register space.
-
-- interrupts:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: should specify the TLMM summary IRQ.
-
-- interrupt-controller:
- Usage: required
- Value type: <none>
- Definition: identifies this node as an interrupt controller
-
-- #interrupt-cells:
- Usage: required
- Value type: <u32>
- Definition: must be 2. Specifying the pin number and flags, as defined
- in <dt-bindings/interrupt-controller/irq.h>
-
-- gpio-controller:
- Usage: required
- Value type: <none>
- Definition: identifies this node as a gpio controller
-
-- #gpio-cells:
- Usage: required
- Value type: <u32>
- Definition: must be 2. Specifying the pin number and flags, as defined
- in <dt-bindings/gpio/gpio.h>
-
-- gpio-ranges:
- Usage: required
- Definition: see ../gpio/gpio.txt
-
-- gpio-reserved-ranges:
- Usage: optional
- Definition: see ../gpio/gpio.txt
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-
-PIN CONFIGURATION NODES:
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
-- pins:
- Usage: required
- Value type: <string-array>
- Definition: List of gpio pins affected by the properties specified in
- this subnode.
-
- Valid pins are:
- gpio0-gpio145
- Supports mux, bias and drive-strength
-
- sdc1_clk, sdc1_cmd, sdc1_data sdc1_rclk, sdc2_clk,
- sdc2_cmd, sdc2_data
- Supports bias and drive-strength
-
-- function:
- Usage: required
- Value type: <string>
- Definition: Specify the alternative function to be configured for the
- specified pins. Functions are only valid for gpio pins.
- Valid values are:
-
- audio_ref_clk, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5,
- blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_i2c9, blsp_i2c10, blsp_i2c11,
- blsp_i2c12, blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2, blsp_spi1_cs3,
- blsp_spi2, blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3,
- blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, blsp_spi8, blsp_spi9,
- blsp_spi10, blsp_spi10_cs1, blsp_spi10_cs2, blsp_spi10_cs3, blsp_spi11,
- blsp_spi12, blsp_uart1, blsp_uart2, blsp_uart3, blsp_uart4, blsp_uart5,
- blsp_uart6, blsp_uart7, blsp_uart8, blsp_uart9, blsp_uart10, blsp_uart11,
- blsp_uart12, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5,
- blsp_uim6, blsp_uim7, blsp_uim8, blsp_uim9, blsp_uim10, blsp_uim11,
- blsp_uim12, blsp11_i2c_scl_b, blsp11_i2c_sda_b, blsp11_uart_rx_b,
- blsp11_uart_tx_b, cam_mclk0, cam_mclk1, cam_mclk2, cam_mclk3,
- cci_async_in0, cci_async_in1, cci_async_in2, cci_i2c0, cci_i2c1,
- cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
- gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a,
- gcc_gp3_clk_b, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk,
- gp1_clk, gps_tx, gsm_tx, hdmi_cec, hdmi_ddc, hdmi_hpd, hdmi_rcv,
- mdp_vsync, mss_lte, nav_pps, nav_tsync, qdss_cti_trig_in_a,
- qdss_cti_trig_in_b, qdss_cti_trig_in_c, qdss_cti_trig_in_d,
- qdss_cti_trig_out_a, qdss_cti_trig_out_b, qdss_cti_trig_out_c,
- qdss_cti_trig_out_d, qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a,
- qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, qua_mi2s, pci_e0,
- pci_e1, pri_mi2s, sdc4, sec_mi2s, slimbus, spkr_i2s, ter_mi2s, tsif1,
- tsif2, uim_batt_alarm, uim1, uim2, uim3, uim4, gpio
-
-- bias-disable:
- Usage: optional
- Value type: <none>
- Definition: The specified pins should be configured as no pull.
-
-- bias-pull-down:
- Usage: optional
- Value type: <none>
- Definition: The specified pins should be configured as pull down.
-
-- bias-pull-up:
- Usage: optional
- Value type: <none>
- Definition: The specified pins should be configured as pull up.
-
-- output-high:
- Usage: optional
- Value type: <none>
- Definition: The specified pins are configured in output mode, driven
- high.
- Not valid for sdc pins.
-
-- output-low:
- Usage: optional
- Value type: <none>
- Definition: The specified pins are configured in output mode, driven
- low.
- Not valid for sdc pins.
-
-- drive-strength:
- Usage: optional
- Value type: <u32>
- Definition: Selects the drive strength for the specified pins, in mA.
- Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
-
-Example:
-
- msmgpio: pinctrl@fd510000 {
- compatible = "qcom,msm8994-pinctrl";
- reg = <0xfd510000 0x4000>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&msmgpio 0 0 146>;
- interrupt-controller;
- #interrupt-cells = <2>;
-
- blsp1_uart2_default: blsp1_uart2_default {
- pinmux {
- pins = "gpio4", "gpio5";
- function = "blsp_uart2";
- };
- pinconf {
- pins = "gpio4", "gpio5";
- drive-strength = <16>;
- bias-disable;
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml
new file mode 100644
index 000000000000..55d5439c6c24
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8994-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8994 TLMM pin controller
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm MSM8994 SoC.
+
+properties:
+ compatible:
+ enum:
+ - qcom,msm8992-pinctrl
+ - qcom,msm8994-pinctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts: true
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 75
+
+ gpio-line-names:
+ maxItems: 150
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-msm8994-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-msm8994-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-msm8994-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$"
+ - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk,
+ sdc2_cmd, sdc2_data, sdc3_clk, sdc3_cmd, sdc3_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ gpio, audio_ref_clk, blsp_i2c1, blsp_i2c2, blsp_i2c3,
+ blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8,
+ blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12, blsp_spi1,
+ blsp_spi1_cs1, blsp_spi1_cs2, blsp_spi1_cs3, blsp_spi2,
+ blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3,
+ blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, blsp_spi8,
+ blsp_spi9, blsp_spi10, blsp_spi10_cs1, blsp_spi10_cs2,
+ blsp_spi10_cs3, blsp_spi11, blsp_spi12, blsp_uart1, blsp_uart2,
+ blsp_uart3, blsp_uart4, blsp_uart5, blsp_uart6, blsp_uart7,
+ blsp_uart8, blsp_uart9, blsp_uart10, blsp_uart11, blsp_uart12,
+ blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5,
+ blsp_uim6, blsp_uim7, blsp_uim8, blsp_uim9, blsp_uim10,
+ blsp_uim11, blsp_uim12, blsp11_i2c_scl_b, blsp11_i2c_sda_b,
+ blsp11_uart_rx_b, blsp11_uart_tx_b, cam_mclk0, cam_mclk1,
+ cam_mclk2, cam_mclk3, cci_async_in0, cci_async_in1,
+ cci_async_in2, cci_i2c0, cci_i2c1, cci_timer0, cci_timer1,
+ cci_timer2, cci_timer3, cci_timer4, gcc_gp1_clk_a,
+ gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a,
+ gcc_gp3_clk_b, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk,
+ gp1_clk, gps_tx, gsm_tx, hdmi_cec, hdmi_ddc, hdmi_hpd,
+ hdmi_rcv, mdp_vsync, mss_lte, nav_pps, nav_tsync,
+ qdss_cti_trig_in_a, qdss_cti_trig_in_b, qdss_cti_trig_in_c,
+ qdss_cti_trig_in_d, qdss_cti_trig_out_a, qdss_cti_trig_out_b,
+ qdss_cti_trig_out_c, qdss_cti_trig_out_d, qdss_traceclk_a,
+ qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
+ qdss_tracedata_a, qdss_tracedata_b, qua_mi2s, pci_e0, pci_e1,
+ pri_mi2s, sdc4, sec_mi2s, slimbus, spkr_i2s, ter_mi2s, tsif1,
+ tsif2, uim_batt_alarm, uim1, uim2, uim3, uim4 ]
+
+ bias-pull-down: true
+ bias-pull-up: true
+ bias-disable: true
+ drive-strength: true
+ input-enable: true
+ output-high: true
+ output-low: true
+
+ required:
+ - pins
+
+ additionalProperties: false
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ tlmm: pinctrl@fd510000 {
+ compatible = "qcom,msm8994-pinctrl";
+ reg = <0xfd510000 0x4000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ gpio-ranges = <&tlmm 0 0 146>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ blsp1-uart2-default-state {
+ function = "blsp_uart2";
+ pins = "gpio4", "gpio5";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ blsp1-spi1-default-state {
+ default-pins {
+ pins = "gpio0", "gpio1", "gpio3";
+ function = "blsp_spi1";
+ drive-strength = <10>;
+ bias-pull-down;
+ };
+
+ cs-pins {
+ pins = "gpio8";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+ };
--
2.34.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: (subset) [PATCH v3 3/3] dt-bindings: pinctrl: qcom,msm8994: convert to dtschema
2022-10-18 15:54 ` [PATCH v3 3/3] dt-bindings: pinctrl: qcom,msm8994: convert to dtschema Krzysztof Kozlowski
@ 2022-10-19 14:44 ` Krzysztof Kozlowski
0 siblings, 0 replies; 5+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-19 14:44 UTC (permalink / raw)
To: devicetree, linux-arm-msm, Andy Gross, Linus Walleij,
Konrad Dybcio, Krzysztof Kozlowski, Rob Herring, linux-gpio,
Krzysztof Kozlowski, Bjorn Andersson, linux-kernel
Cc: Rob Herring
On Tue, 18 Oct 2022 11:54:50 -0400, Krzysztof Kozlowski wrote:
> Convert Qualcomm MSM8994 pin controller bindings to DT schema. Keep the
> parsing of pin configuration subnodes consistent with other Qualcomm
> schemas (children named with '-state' suffix, their children with
> '-pins').
>
>
Applied, thanks!
[3/3] dt-bindings: pinctrl: qcom,msm8994: convert to dtschema
https://git.kernel.org/krzk/linux-dt/c/73b8365a75f1810ba7dda73c6721ebdf12851bbc
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: (subset) [PATCH v3 1/3] arm64: dts: qcom: msm8994: Correct SPI10 CS pin
2022-10-18 15:54 [PATCH v3 1/3] arm64: dts: qcom: msm8994: Correct SPI10 CS pin Krzysztof Kozlowski
2022-10-18 15:54 ` [PATCH v3 2/3] arm64: dts: qcom: msm8994: Align TLMM pin configuration with DT schema Krzysztof Kozlowski
2022-10-18 15:54 ` [PATCH v3 3/3] dt-bindings: pinctrl: qcom,msm8994: convert to dtschema Krzysztof Kozlowski
@ 2022-11-08 1:27 ` Bjorn Andersson
2 siblings, 0 replies; 5+ messages in thread
From: Bjorn Andersson @ 2022-11-08 1:27 UTC (permalink / raw)
To: devicetree, robh+dt, linus.walleij, konrad.dybcio,
krzysztof.kozlowski+dt, agross, linux-gpio, linux-kernel,
krzysztof.kozlowski, linux-arm-msm
On Tue, 18 Oct 2022 11:54:48 -0400, Krzysztof Kozlowski wrote:
> The GPIO55 is part of SPI10 pins, not its chip-select. Probably the
> intention was to use one of dedicated chip-select GPIOs: 47 or 67.
> GPIO47 is used for UART2, so choose GPIO67.
>
>
Applied, thanks!
[1/3] arm64: dts: qcom: msm8994: Correct SPI10 CS pin
commit: 5d76dfb86850893f2506e15a1dc68977c3adc79f
[2/3] arm64: dts: qcom: msm8994: Align TLMM pin configuration with DT schema
commit: 9d7d01da9a24a8e37fa156d93dbea893a0665f94
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2022-11-08 1:27 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-10-18 15:54 [PATCH v3 1/3] arm64: dts: qcom: msm8994: Correct SPI10 CS pin Krzysztof Kozlowski
2022-10-18 15:54 ` [PATCH v3 2/3] arm64: dts: qcom: msm8994: Align TLMM pin configuration with DT schema Krzysztof Kozlowski
2022-10-18 15:54 ` [PATCH v3 3/3] dt-bindings: pinctrl: qcom,msm8994: convert to dtschema Krzysztof Kozlowski
2022-10-19 14:44 ` (subset) " Krzysztof Kozlowski
2022-11-08 1:27 ` (subset) [PATCH v3 1/3] arm64: dts: qcom: msm8994: Correct SPI10 CS pin Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).