[PATCH v3 2/5] gpio/aspeed: Fix incorrect number of banks

[PATCH v3 2/5] gpio/aspeed: Fix incorrect number of banks

[Rashmica Gupta]

The current calculation for the number of GPIO banks is only correct if
the number of GPIOs is a multiple of 32 (if there were 31 GPIOs we would
currently say there are 0 banks, which is incorrect).

Fixes: 361b79119a4b7 ('gpio: Add Aspeed driver')

Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
---
 drivers/gpio/gpio-aspeed.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
index 9defe25d4721..b83e23aecd18 100644
--- a/drivers/gpio/gpio-aspeed.c
+++ b/drivers/gpio/gpio-aspeed.c
@@ -1165,7 +1165,7 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev)
 	gpio->chip.base = -1;
 
 	/* Allocate a cache of the output registers */
-	banks = gpio->config->nr_gpios >> 5;
+	banks = DIV_ROUND_UP(gpio->config->nr_gpios, 32);
 	gpio->dcache = devm_kcalloc(&pdev->dev,
 				    banks, sizeof(u32), GFP_KERNEL);
 	if (!gpio->dcache)
-- 
2.20.1

Re: [PATCH v3 2/5] gpio/aspeed: Fix incorrect number of banks

[Joel Stanley]

On Fri, 6 Sep 2019 at 06:26, Rashmica Gupta <rashmica.g@gmail.com> wrote:
>
> The current calculation for the number of GPIO banks is only correct if
> the number of GPIOs is a multiple of 32 (if there were 31 GPIOs we would
> currently say there are 0 banks, which is incorrect).
>
> Fixes: 361b79119a4b7 ('gpio: Add Aspeed driver')
>
> Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
> Reviewed-by: Andrew Jeffery <andrew@aj.id.au>

Reviewed-by: Joel Stanley <joel@jms.d.au>

> ---
>  drivers/gpio/gpio-aspeed.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
> index 9defe25d4721..b83e23aecd18 100644
> --- a/drivers/gpio/gpio-aspeed.c
> +++ b/drivers/gpio/gpio-aspeed.c
> @@ -1165,7 +1165,7 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev)
>         gpio->chip.base = -1;
>
>         /* Allocate a cache of the output registers */
> -       banks = gpio->config->nr_gpios >> 5;
> +       banks = DIV_ROUND_UP(gpio->config->nr_gpios, 32);
>         gpio->dcache = devm_kcalloc(&pdev->dev,
>                                     banks, sizeof(u32), GFP_KERNEL);
>         if (!gpio->dcache)
> --
> 2.20.1
>

Re: [PATCH v3 2/5] gpio/aspeed: Fix incorrect number of banks

[Linus Walleij]

On Fri, Sep 6, 2019 at 7:26 AM Rashmica Gupta <rashmica.g@gmail.com> wrote:

> The current calculation for the number of GPIO banks is only correct if
> the number of GPIOs is a multiple of 32 (if there were 31 GPIOs we would
> currently say there are 0 banks, which is incorrect).
>
> Fixes: 361b79119a4b7 ('gpio: Add Aspeed driver')
>
> Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
> Reviewed-by: Andrew Jeffery <andrew@aj.id.au>

Patch applied.

Yours,
Linus Walleij