[PATCH] hwmon: (nct7802) Fix wrong detection if in4 presence

[PATCH] hwmon: (nct7802) Fix wrong detection if in4 presence

[Guenter Roeck]

The code to detect if in4 is present is wrong; if in4 is not present,
the in4_input sysfs attribute is still present.

In detail:

- Ihen RTD3_MD=11 (VSEN3 present), everything is as expected (no bug).
- If we have RTD3_MD!=11 (no VSEN3), we unexpectedly have a in4_input
  file under /sys and the "sensors" command displays in4_input.
  But as expected, we have no in4_min, in4_max, in4_alarm, in4_beep.

Fix is_visible function to detect and report in4_input visibility
as expected.

Reported-by: Gilles Buloz <Gilles.Buloz@kontron.com>
Cc: Gilles Buloz <Gilles.Buloz@kontron.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 drivers/hwmon/nct7802.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/hwmon/nct7802.c b/drivers/hwmon/nct7802.c
index ec7bcf8d7cd6..f3dd2a17bd42 100644
--- a/drivers/hwmon/nct7802.c
+++ b/drivers/hwmon/nct7802.c
@@ -704,7 +704,7 @@ static struct attribute *nct7802_in_attrs[] = {
 	&sensor_dev_attr_in3_alarm.dev_attr.attr,
 	&sensor_dev_attr_in3_beep.dev_attr.attr,
 
-	&sensor_dev_attr_in4_input.dev_attr.attr,	/* 17 */
+	&sensor_dev_attr_in4_input.dev_attr.attr,	/* 16 */
 	&sensor_dev_attr_in4_min.dev_attr.attr,
 	&sensor_dev_attr_in4_max.dev_attr.attr,
 	&sensor_dev_attr_in4_alarm.dev_attr.attr,
@@ -730,9 +730,9 @@ static umode_t nct7802_in_is_visible(struct kobject *kobj,
 
 	if (index >= 6 && index < 11 && (reg & 0x03) != 0x03)	/* VSEN1 */
 		return 0;
-	if (index >= 11 && index < 17 && (reg & 0x0c) != 0x0c)	/* VSEN2 */
+	if (index >= 11 && index < 16 && (reg & 0x0c) != 0x0c)	/* VSEN2 */
 		return 0;
-	if (index >= 17 && (reg & 0x30) != 0x30)		/* VSEN3 */
+	if (index >= 16 && (reg & 0x30) != 0x30)		/* VSEN3 */
 		return 0;
 
 	return attr->mode;
-- 
2.7.4