linux-hwmon.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Nuno Sá" <nuno.sa@analog.com>
To: <linux-hwmon@vger.kernel.org>, <devicetree@vger.kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>,
	Jean Delvare <jdelvare@suse.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>
Subject: [PATCH v2 2/2] dt-bindings: hwmon: Add AXI FAN Control documentation
Date: Wed, 9 Oct 2019 12:28:06 +0200	[thread overview]
Message-ID: <20191009102806.262241-2-nuno.sa@analog.com> (raw)
In-Reply-To: <20191009102806.262241-1-nuno.sa@analog.com>

Document the AXI FAN Control IP core devicetree bindings.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
---
Changes in v2:
 * Set the correct license for new bindings;
 * Fix wrong compatible in the example;
 * Wrap long line;
 * Update adi,pulses-per-revolution with accepted values.

 .../bindings/hwmon/adi,axi-fan-control.yaml   | 62 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 2 files changed, 63 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml

diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
new file mode 100644
index 000000000000..dc82b9748c9d
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2019 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/hwmon/adi,axi-fan-control.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AXI FAN Control Device Tree Bindings
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |+
+  Bindings for the Analog Devices AXI FAN Control driver. Spefications of the
+  core can be found in:
+
+  https://wiki.analog.com/resources/fpga/docs/axi_fan_control
+
+properties:
+  compatible:
+    enum:
+        - adi,axi-fan-control-1.00.a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  adi,pulses-per-revolution:
+    description:
+      Value specifying the number of pulses per revolution of the controlled
+      FAN.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - adi,pulses-per-revolution
+
+examples:
+  - |
+    fpga_axi: fpga-axi@0 {
+            #address-cells = <0x2>;
+            #size-cells = <0x1>;
+
+            axi_fan_control: axi-fan-control@80000000 {
+                    compatible = "adi,axi-fan-control-1.00.a";
+                    reg = <0x0 0x80000000 0x10000>;
+                    clocks = <&clk 71>;
+                    interrupts = <0 110 0>;
+                    adi,pulses-per-revolution = <2>;
+            };
+    };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index caa80ae1925e..74ddcb3e1fd9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2879,6 +2879,7 @@ W:	http://ez.analog.com/community/linux-device-drivers
 L:	linux-hwmon@vger.kernel.org
 S:	Supported
 F:	drivers/hwmon/axi-fan-control.c
+F:	Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
 
 AXXIA I2C CONTROLLER
 M:	Krzysztof Adamski <krzysztof.adamski@nokia.com>
-- 
2.23.0


  reply	other threads:[~2019-10-09 10:28 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-09 10:28 [PATCH v2 1/2] hwmon: Support ADI Fan Control IP Nuno Sá
2019-10-09 10:28 ` Nuno Sá [this message]
2019-10-11 16:59   ` [PATCH v2 2/2] dt-bindings: hwmon: Add AXI FAN Control documentation Rob Herring
2019-10-20 16:12   ` Guenter Roeck
2019-10-20 16:12 ` [PATCH v2 1/2] hwmon: Support ADI Fan Control IP Guenter Roeck
2020-02-05  8:11   ` Sa, Nuno
2020-02-05 16:03     ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191009102806.262241-2-nuno.sa@analog.com \
    --to=nuno.sa@analog.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jdelvare@suse.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).