Linux-Hwmon Archive on
 help / color / Atom feed
* Help Query
@ 2020-01-31 21:45 Steven Kucharzyk
  0 siblings, 0 replies; only message in thread
From: Steven Kucharzyk @ 2020-01-31 21:45 UTC (permalink / raw)
  To: linux-hwmon

Sorry to ask and if not you may you tell which group or person would be
better suited to deal with this.

Q. (spec's follow)
the Short of it:

I upgraded my cpu and lost temperature reading via "sensors" cmd on my
video card. Output shows card with a constant +0.0C while card control
app shows true temperatures. Is there something I can do to correct the

Thank you for time 


	MB: 		Asus M4A89GTD PRO
Original CPU: 	AMD Athlon II X3
Replacement: 	AMD Phenom II X6
Graphics:		Nvidia GTX650
	O/S		openSuSE 15.1

--- --- --- --- --- --- --- --- 
This e-mail message may contain privileged and/or confidential
information, and is intended to be received only by persons entitled to
receive such information. If you have received this e-mail in error,
please notify the sender immediately or you may suffer consequences by
wrongful association. You are Advised to: delete it and all attachments
from any servers, hard drives or any other media. As a non-designated
recipient - any other use of this e-mail by you is strictly prohibited.
This email is subject to the control, laws and regulations of the
United States.
--- --- --- --- --- --- --- ---

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-31 21:45 Help Query Steven Kucharzyk

Linux-Hwmon Archive on

Archives are clonable:
	git clone --mirror linux-hwmon/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hwmon linux-hwmon/ \
	public-inbox-index linux-hwmon

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone