[PATCH v5 3/5] dt-bindings: hwmon: Document adt7475 pwm-active-state property

[Chris Packham <chris.packham@alliedtelesis.co.nz>]

Add binding information for the adi,pwm-active-state property.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

Notes:
    Changes in v5:
    - change to adi,pwm-active-state
    - uint32 array
    
    Changes in v4:
    - use $ref uint32 and enum
    - add adi vendor prefix
    
    Cahnges in v3:
    - new

 .../devicetree/bindings/hwmon/adt7475.yaml         | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
index e40612ee075f..76985034ea73 100644
--- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -50,6 +50,19 @@ patternProperties:
      - $ref: /schemas/types.yaml#/definitions/uint32
      - enum: [0, 1]
 
+  "^adi,pwm-active-state$":
+    description: |
+      Integer array, represents the active state of the pwm outputs If set to 0
+      the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm
+      uses a logic high output for 100% duty cycle.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+      - minItems: 3
+        maxItems: 3
+        items:
+          enum: [0, 1]
+          default: 1
+
 required:
   - compatible
   - reg
@@ -65,6 +78,7 @@ examples:
         reg = <0x2e>;
         adi,bypass-attenuator-in0 = <1>;
         adi,bypass-attenuator-in1 = <0>;
+        adi,pwm-active-state = <1 0 1>;
       };
     };
 
-- 
2.25.1